美利体育登录入口官网

状态报告（重新批准于 1997 年）：混凝土中的锚固

Status Report (Re-approved 1997): Anchors in Concrete

胶粘剂 主要失效模式的命名（ISO 10365:2022）

Adhesives - Designation of main failure patterns (ISO 10365:2022)

精细陶瓷（先进陶瓷 先进技术陶瓷） 强度数据的威布尔统计（ISO 20501:2019）（2023年2月由西班牙标准化协会认可）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data (ISO 20501:2019) (Endorsed by Asociación Espa?ola de Normalización in February 2023.)

用圆盘法测定预制胶带密封剂拉伸粘合强度的标准试验方法

Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

土工合成材料大规模静水穿刺试验的标准试验方法

Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics

纤维增强塑料(FRP)接合中失效方式分类的标准操作规程

Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

纤维增强塑料(FRP)接合中失效方式分类的标准操作规程

Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

粘合在混凝土或砖石衬底上的FRP层压板系统的拉脱强度的标准试验方法

Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates

粘合剂拉伸性能的标准试验方法

Standard Test Method for Tensile Properties of Adhesive Bonds

三明治面板切割的标准测试方法

Standard Test Method for Facing Cleavage of Sandwich Panels

混凝土和砌体锚固和紧固件的标准术语

Standard Terminology for Anchors and Fasteners in Concrete and Masonry

可靠性验证试验的标准指南

Standard Guide for Reliability Demonstration Testing

脊柱植入物检验的标准实施规程

Standard Practice for Inspection of Spinal Implants Undergoing Testing

全椎间盘假体撞击试验的标准指南

Standard Guide for Impingement Testing of Total Disc Prostheses

用落锤法测定整体聚碳酸酯板抗冲击性的标准试验方法

Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

挠性隔栅材料的密封强度的标准试验方法

Standard Test Method for Seal Strength of Flexible Barrier Materials

汽车焊接质量—铝材电阻点焊规范

Specification for Automotive Weld Quality - Resistance Spot Welding of Aluminum

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

非预加负荷结构的螺栓连接组件.适宜性试验

Non-preloaded structural bolting assemblies - Suitability test

光纤互连装置和无源光学元件可靠性.无源元件失效模式和失效机理评定试验

Reliability of fibre optic interconnecting devices and passive optical components - Relevant tests for evaluating failure modes and failure mechanisms for passive components

产品加速测试方法

Methods for product accelerated testing

粘合剂 主要失效模式的指定

Adhesives. Designation of main failure patterns

空间系统 结构部件与组件

Space systems. Structural components and assemblies

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

滑动轴承 薄壁半轴承的质量保证 设计失效模式与影响分析

Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA

聚乙烯（PE）管道和配件 测定对接熔接接头试件的拉伸强度和失效模式

Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

滚动轴承 损坏和故障 术语、特征和原因

Rolling bearings. Damage and failures. Terms, characteristics and causes

锅炉和压力容器 性能要求

Boilers and pressure vessels - Performance requirements

锅炉和压力容器 满足 ISO 16528-1 要求的程序

Boilers and pressure vessels - Procedures for fulfilling the requirements of ISO 16528-1

用于冶金轧辊部件的高速氧燃料 (HVOF) 金属陶瓷涂层 指导性要求

High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components. Guidance with requirements

内燃机全流式润滑油滤清器的试验方法 复合滤清器外壳的静态爆破压力试验

Methods of test for full-flow lubricating oil filters for internal combustion engines - Static burst pressure test for composite filter housings

内燃机全流式润滑油滤清器的试验方法 静态爆破压力测试

Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test

正齿轮和斜齿轮负载能力的计算-基本原理、介绍和一般影响因素

Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors

精细陶瓷（先进陶瓷、先进技术陶瓷） 强度数据的威布尔统计（ISO 20501:2019）

Fine ceramics (advanced ceramics, advanced technical ceramics) – Weibull statistics for strength data (ISO 20501:2019)

粘合剂 主要失效模式的指定

Adhesives – Designation of main failure patterns

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears – Wear and damage to gear teeth – Part 1: Nomenclature and characteristics

冶金轧辊部件的高速火焰 (HVOF) 金属陶瓷涂层 指导要求

High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components – Guidance with requirements

电梯安全风险评估规范

Elevator Safety Risk Assessment Specifications

航空与航天.钛及钛合金精密铸件.技术规范

Aerospace; precision castings of titanium and titanium alloys; technical specification

混凝土支承结构防护和维修用产品和系统.试验方法.通过测定钢板胶粘作用表征结构胶粘剂性能

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999

防水软板 连接件抗剥离性的测定 第2部分：屋顶防水用塑料和橡胶板（草案）

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

防水软板.连接件抗剥离性的测定.第2部分:屋顶防水用塑料和橡胶板.德文版本EN 12316-2-2013

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12316-2:2013

半导体器件 机械和气候测试方法 第42部分：温度和湿度存储（IEC 60749-42:2014）；德文版 EN 60749-42:2014

Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage (IEC 60749-42:2014); German version EN 60749-42:2014

半导体器件 机械和气候测试方法 第43部分：IC 可靠性鉴定计划指南（草案）

Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans

光纤互连器件和无源元件可靠性.第3部分:评定无源元件失效模式和失效机理的相关试验(IEC 62005-3:2001)

Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001); German version EN 62005-3:2001

纤维光学互连器件和无源光学元件的可靠性.第7部分:寿命应力模型

Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling (IEC 62005-7:2004); German version EN 62005-7:2004

半导体器件 通用半导体鉴定指南 第1部分：LSI 可靠性鉴定指南

Semiconductor devices - Generic semiconductor qualification guidelines - Part 1: Guidelines for LSI reliability qualification (IEC 47/2614/CDV:2020); German and English version prEN IEC 63287-1:2020 / Note: Date of issue 2020-05-08*Intended as replacem...

粘合剂 主要失效模式指定（ISO 10365:2022）

Adhesives - Designation of main failure patterns (ISO 10365:2022)

粘合剂 主要失效模式的指定

Adhesives - Designation of main failure patterns (ISO 10365:2022); German version EN ISO 10365:2022

机械连接 接头的破坏性测试 单接头拉伸剪切测试的样本尺寸和测试程序

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013); German version EN ISO 12996:2013

鞋类 整鞋测试方法 鞋底附着力

Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018); German version EN ISO 17708:2018

鞋类 拉链的测试方法 在侧向力作用下闭合时的抗损坏性（草案）

Test method for resistance of footwear zippers to damage when closed under the action of lateral forces (draft)

精细陶瓷（先进陶瓷、先进技术陶瓷） 强度数据的威布尔统计

Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data (ISO 20501:2019); German version EN ISO 20501:2022

滑动轴承 薄壁半轴承的质量保证 设计 FMEA

Plain bearings - Quality assurance of thin-walled half-bearings - Design FMEA (ISO 12132:2017)

机械连接 结合部位的破坏性测试 单接缝十字拉伸试验用样本尺寸和试验规程

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints

微电路测试方法标准 第3部分：数字微电路电气测试方法3000-3999

Test Method Standard - Electrical Tests (Digital) for Microcircuits - Part 3: Test Methods 3000-3999

微电路电气测试方法标准(线性) 第4部分：测试方法4000-4999

Electrical Tests (Linear) for Microcircuits Part 4: Test Methods 4000-4999

微电路测试方法 - 第5部分：测试方法 5000-5999

Test Methods for Microcircuits - Part 5: Test Methods 5000-5999

焊接技术规范 DVS 3302

Welding Technical Specification DVS 3302

汽车车身粘接断裂图像评估指南

Guideline DVS 3302 Adhesive Bonding in Body Construction: Evaluation of Fracture Images

压力容器 第4部分：制造、检验和验收

Pressure vessels Part 4: Manufacturing, inspection and acceptance

低压电涌保护器元件 第341部分：电涌抑制晶闸管（TSS）规范

Components for low-voltage surge protective devices.Part 341:Specification for thyristor surge suppressors(TSS)

机器状态监测与诊断 一般指南

Condition monitoring and diagnostics of machines.General guidelines

滚动轴承 损伤和失效 术语、特征及原因

Rolling bearings—Damage and failures—Terms，characteristics and causes

聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分:开孔拉伸强度试验方法

Test method for open-hole/loaded-hole of polymer matrix composite laminates.Part 3:Test method of open-hole tensile strength

客运架空索道风险评价方法

Risk assessment methodology for passenger aerial ropeways

电子美利体育官网首页网址可靠性预计模型及数据手册

Handbook of reliability prediction model and data for electronic equipment

内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验

Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 13:Static burst pressure test for composite filter housings

内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验

Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test

半导体分立器件失效分析方法和程序

Semiconductor discrete device failure analysis methods and procedures

半导体集成电路失效分析程序和方法

Semiconductor integrated circuit failure analysis procedures and methods

微电子器件试验方法和程序

Microelectronic device test methods and procedures

高分子复合材料. 用于平板试样拉伸的试验方法

Polymer composites. Test method for tensile of flat specimens

螺丝 螺丝磨损和损坏 部分1：命名与特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

航空金属制件失效分析 程序与要求

Failure analysis procedure and requirements for aeronautical metal material products

光纤互连器件和无源元件的可靠性 第 3 部分：无源元件失效模式和机制评估的相关测试（1.0 版）

Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for the evaluation of failure modes and mechanisms of passive components (Edition 1.0)

印刷电子器件.第501-1部分:质量评定.失效模式和机械试验.柔性和/或弯曲初级或次级电池

Printed electronics - Part 501-1: Quality assessment - Failure modes and mechanical testing - Flexible and/or bendable primary or secondary cells

风力发电机组 - 第4-1部分：风力发电机组传动系统部件的可靠性评估

Wind energy generation systems - Part 4-1: Reliability assessment of drivetrain components in wind turbines

粘合剂——主要失效模式的指定

Adhesives — Designation of main failure patterns

齿轮.轮齿的磨损和损坏.第1部分：术语和特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

机械连接.结合部位的破坏性试验.单接缝拉力剪切测试用样本尺寸规格和试验规程

Mechanical joining.Destructive testing of joints.Specimen dimensions and test procedure for tensile shear testing of single joints

聚乙烯管材和管件 拉申强度的测定和熔接对接接头试件的失效模型

Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint

滚动轴承.损伤和故障.术语、特性和成因

Rolling bearings - Damage and failures - Terms, characteristics and causes

机械连接. 结合部位的破坏性测试. 单接缝十字拉伸试验用样本尺寸和试验规程

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints

航天系统.结构设计.应力分析要求

Space systems - Structural design - Stress analysis requirements

锅炉和压力容器.第1部分:性能要求

Boilers and pressure vessels - Part 1: Performance requirements

锅炉和压力容器.第2部分:ISO 16528-1的要求履行规程

Boilers and pressure vessels - Part 2: Procedures for fulfilling the requirements of ISO 16528-1

建筑和土木工程.密封剂.用剥离试验测试粘合性能

Buildings and civil engineering works — Sealants — Testing of adhesion properties using a bead peel test

女用避孕套 - 要求和测试方法

Female condoms — Requirements and test methods

纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第2部分:弯曲强度的测度

Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength

纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第4部分:表观层间剪切强度的测定

Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength

心血管植入物.心脏瓣膜假体

Cardiovascular implants - Cardiac valve prostheses

直齿轮和斜齿轮承载能力的计算.第1部分:基本原理、简介和一般影响因素

Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors

滚动轴承.损伤和故障.术语、特性和原因

Rolling bearings -- Damage and failures -- Terms, characteristics and causes

不可膨胀压力容器 第9部分：与标准EN 13445及ISO 16528的符合性

Unfired pressure vessels - Part 9: Conformance of the EN 13445 series to ISO 16528

半导体器件 机械和环境试验方法 第43部分：集成电路可靠性鉴定试验计划导则（IEC 60749-43:2017）

Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans (IEC 60749-43:2017)

光纤连接器和无源组件的可靠性 第3部分：用于评估无源组件故障性质和故障机制的必要测试（IEC 62005-3:2001）

Reliability of fibre optic interconnecting devices and passive components. Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001)

半导体器件 半导体器件评估通用指南 第1部分：集成电路可靠性评估指南（IEC 63287-1:2021）

Semiconductor devices - Generic semiconductor qualification guidelines - Part 1: Guidelines for IC reliability qualification (IEC 63287-1:2021)

胶水 主要折射结构的标识（ISO 10365:2022）

Adhesives - Designation of main failure patterns (ISO 10365:2022)

技术陶瓷（现代陶瓷 现代技术陶瓷） 韦布尔统计分析法强度数据（ISO 20501:2019）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data (ISO 20501:2019)

工装和美利体育官网首页网址机械 FMEA 的潜在失效模式和影响分析（第 2 版）

Potential Failure Mode and Effects Analysis For Tooling & Equipment Machinery FMEA (2nd Edition)

胶黏剂 主要失效模式的命名（ISO 10365:1992 等同采用）

ADHESIVES - DESIGNATION OF MAIN FAILURE PATTERNS (ISO 10365:1992, IDT)

NACE国际测试方法TM21420-2018

NACE International Test Method TM21420-2018

核电厂系统失效模式、影响及：π苑治鲋改

Nuclear power plant system failure mode, impact and hazard analysis guide

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

粘合剂 - 主要断裂表面的命名

Adhesives - Designation of the main rupture facies

齿轮 - 齿的磨损和缺陷 - 第 1 部分：术语和特性

Gears - Wear and defects of teeth - Part 1: Nomenclature and characteristics

粘合剂 主要失效模式的名称

Adhesives - Designation of main failure patterns

管道系统 陆地和海底管道的钢质管道 诚信经营行为守则

Pipeline systems. Steel pipelines on land and subsea pipelines. Code of practice for integrity management

非受火压力容器.第9部分:EN 13445系列和ISO 16528的一致性

Unfired pressure vessels - Part 9: Conformance of the EN 13445 series to ISO 16528

型圈失效模式

Patterns of O-Ring Failures

可靠性为中心的维修(RCM)过程评价标准

Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes

胶黏剂 主要失效模式的指定（ISO 10365:2022）

Adhesives - Designation of main failure patterns (ISO 10365:2022)

滚动轴承 损伤和失效 术语、特性和原因（ISO 15243:2017 等同采用）

Rolling bearings - Damage and failures - Terms, characteristics and causes (ISO 15243:2017, IDT)

石油管材与装备材料失效分析导则

Pipeline Materials and Equipment Materials Failure Analysis Guide

电子元器件失效机理、模式及影响分析（FMMEA）通用方法和程序

General Methods and Procedures for Failure Mechanism, Modes and Effects Analysis (FMMEA) of Electronic Components

光纤部件温度寿命试验方法

Fiber Optic Component Temperature Life Test

光纤无源组件可靠性：光纤连接器的故障模式及机制

Reliability of Passive Fiber Optic Components: Failure Modes and Mechanisms of Fiber Optic Connectors

系统可靠性分析技术 故障模式和影响分析（FMEA）程序

Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)

粘合剂 主要失效模式的指定

Adhesives - Designation of main failure patterns (ISO 10365:2022)

胶粘剂 主要失效模式的指定

Adhesives - Designation of main failure patterns

高级陶瓷（先进陶瓷 高性能技术陶瓷） 抗压强度威布尔统计

Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

故障分析 基本准则与执行方法

Failure analysis Fundamentals and performance of failure analysis

3D 应力标准应用指南

3D Stress Criteria Guidelines for Application