美利体育登录入口官网

照明美利体育官网首页网址性能测试方法

Lighting equipment performance test methods

油田设施用2英寸捶打接头的安全使用

Safe Use of 2-inch Hammer Unions for Oilfield Applications

锌和镉表面铬酸盐涂层试验的标准实施规程

Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

评价构造密封门窗玻璃破坏的标准指南

Standard Guide for Evaluating Failure of Structural Sealant Glazing

评价构造密封门窗玻璃破坏的标准指南

Standard Guide for Evaluating Failure of Structural Sealant Glazing

恒定内压下塑料管破裂时间的标准试验方法

Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

金属间胶粘剂蠕变试验的标准实施规程

Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

采用使用弯曲梁法的粘合剂评估塑料应力开裂的标准试验方法

Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

非沥青质有机屋面薄膜材料接缝的故障时间 (蠕变断裂) 试验的标准试验方法

Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

由EPDM屋顶膜材料制造的胶粘剂接头的失效时间 (蠕变破裂) 的标准实施规程

Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

无限制包装的内部加压破坏电阻的标准测试方法

Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

绳索救援训练用结构物上安装式固定锚点的标准规范

Standard Specification for Fixed Anchorages Installed on Structures used for Rope Rescue Training

用于绳索救援训练的结构上安装的固定锚固的标准规范

Standard Specification for Fixed Anchorages Installed on Structures Used for Rope Rescue Training

塑料管道系统 玻璃增强热固性塑料（GRP）管道 潮湿条件下长期最终相对环挠度的测定

Plastics piping systems - Glass - reinforced thermosetting plastics ( GRP ) pipes - Determination of the long - term ultimate relative ring deflection under wet conditions

塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.耐长期内压力的测定

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure

塑料管道系统 玻璃增强热固性塑料(GRP)管道 循环内压影响的试验方法

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure

热塑性塑料管道 测定抵抗外部冲击的能力 全天候方法

Thermoplastics pipes. Determination of resistance to external blows. Round-the-clock method

组成软木塞 垫片材料 测试方法

Composition cork. Gasket material. Test methods

发光二极管大型灯（户外显示用）耐久性试验法–预烧试验（顺向偏压）

Mothod of Endurance Test for Light Emitting Diode Big Lamps (for Outdoor Display)-Burn-in Test (Forward Bias)

可靠度分析指导纲要

Guideline for reliability analysis

塑料管道系统.玻璃增强热固性塑料管(GRP)长期耐内压能力的测定;德文版本EN 1447-2009+A1-2010

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010

塑料管道系统 玻璃增强热固性塑料（GRP）管道 长期耐内压的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009+A1:2010

潜在易爆环境用保护系统的功能安全性评定方法

Methodology for functional safety assessment of protective systems for potentially explosive atmospheres; English version of DIN EN 15233:2007-11

潜在爆炸性环境防护系统功能安全评估方法

Methodology for functional safety assessment of protective systems for potentially explosive atmospheres; German version EN 15233:2007

低压开关美利体育官网首页网址和控制美利体育官网首页网址.第5-4部分:控制电路器件和切换元件.低能量触头性能的评估方法.特殊试验

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests (IEC 60947-5-4:2002); German version EN 60947-5-4:2003

魏布尔分析

Weibull analysis (IEC 61649:2008); German version EN 61649:2008

动态模块.第2部分:可靠性鉴定(IEC 62343-2-2011).德文版EN 62343-2-2011

Dynamic modules - Part 2: Reliability qualification (IEC 62343-2:2011); German version EN 62343-2:2011

流体传输用热塑管、接头和组件.抗内压力的测定.第1部分:通用方法

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05

石油和天然气工业 玻璃纤维增强塑料(GRP)管 第1部分：词汇、符号、应用和材料（草案）

Glass fiber reinforced plastic (GRP) pipes for the oil and gas industry Part 1: Vocabulary, symbols, applications and materials (draft)

彩色打印机和含有印刷组件的多功能美利体育官网首页网址的硒鼓产出率测定方法 (ISO/IEC 19798-2007 + 勘误表1-2012)

Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components (ISO/IEC 19798:2007 + Cor. 1:2012)

单相交流感应式有功电能表使用导则

Technical requirements for stocking single phase alternating current induction watt-hour meter

海底管线系统完整性管理推荐实践

Recommended Practice for Subsea Pipeline System Integrity Management

电测量美利体育官网首页网址 可信性 第311部分：温度和湿度加速可靠性试验

Electricity metering equipment—Dependability—Part 311:Accelerated reliability testing—Elevated temperature and humidity

电测量美利体育官网首页网址 可信性 第41部分：可靠性预测

Electricity metering equipment.Dependability.Part 41:Reliability prediction

机器状态监测与诊断 词汇

Condition monitoring and diagnostics of machines Vocabulary

滚动轴承 寿命可靠性试验及评定方法

Rolling bearing life reliability test and evaluation method

软件工程 软件异常分类指南

Software engineering.Guideline of classification for software anomalies

液压元件可靠性评估方法

Methods to assess the reliability of hydraulic components

汽车电气电子可靠性术语

Terminology of reliability for automotive electrical and electronics

气动 基于加速寿命试验的元件可靠性评估 通用指南和程序

Pneumatic fluid power—Assessment of component reliability by accelerated life testing—General guidelines and procedures

玻璃纤维增强热固性塑料管和管道部分. 持续内压下破坏时间的测定

Fiberglass reinforced thermosetting plastic pipes and part of pipelines. Methods for determination of time to failure under sustained internal pressure

可信性管理 第3-5部分：应用指南 可靠性试验条件和统计试验的原则

Dependability management - Part 3-5: Application guide; Reliability test conditions and statistical test principles

光纤放大器.第5-2部分:合格评定规范.光纤放大器可靠性合格评定

Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibre amplifiers

光放大器 第5-2部分：资格规范 光纤放大器的可靠性资格 整合版

Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers CONSOLIDATED VERSION

纤维光学互连器件和无源元件的可靠性 第1部分：引导指南及定义

Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions

玻璃纤维增强热固性树脂管 直径压缩长期变形的测定(Sb)

Glass-fiber reinforced thermosetting resin pipes. Determination of long-term diametrical compression strain (Sb)

摩托车轮胎 要求与试验方法

Pneumatic tyres for motorcycles. Requirements and test methods.

滚动轴承.损伤和故障.术语、特性和成因

Rolling bearings - Damage and failures - Terms, characteristics and causes

塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 持续内压力下破坏时间的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure

液压传动.液压部件可靠性评估的方法.第1部分:通用程序和计算方法

Hydraulic fluid power - Methods to assess the reliability of hydraulic components - Part 1: General procedures and calculation method

办公机械 小胶印机 可靠性要求及试验方法

Office equipment.Offset duplicator.Reliability requirements and test methods

土方机械 非公路自卸车 可靠性试验方法、失效分类及评定

Reliability test method, failure classification and evaluation of off-highway dump trucks for earth-moving machinery

高温阻断试验方法导则

Guideline for high temperature blocking test method

热循环负载试验方法导则

Guideline for thermal cycling loading test method

仪器仪表可靠性验证试验及测定试验(指数分布)导则

Guideline for reliability validation test and determination test (exponential distribution) for instrumentation

银行业软件异常分类

Banking industry software anomaly classification

光学放大器 第5-2部分 资格认证要求 光纤放大器的可靠性评估（IEC 61291-5-2:2017）

Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers (IEC 61291-5-2:2017)

航空航天系列 化学品、材料和工艺淘汰管理的一般原则

Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes

故障模式与影响分析（FMEA和FMECA）(IEC 60812:2018)

Failure modes and effects analysis (FMEA and FMECA) (IEC 60812:2018)

热塑性管材 抗外部冲击性能的测定 阶梯法（ISO 11173:1994）

Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)

材料选择与腐蚀问题案例研究

Material Selection and Corrosion Problem Case Study

原油处理设施废水处理中双相不锈钢阀失效

FAILURE OF DUPLEX STAINLESS STEEL VALUES IN EFFLUENT WATER SERVICE IN A CRUDE OIL PROCESSING FACILITY

风力发电机组 变流器 可靠性技术规范

Technical specifications for reliability of wind turbine converters

液压流体动力 评估液压元件可靠性的方法 一般程序及计算方法

Hydraulic fluid power. Methods to assess the reliability of hydraulic components. General procedures and calculation method

航天产品不合格、失效和危险分类

Nonconformity,failure and hazard classification for space products

塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 长期耐内压性的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term reistance to internal pressure

塑料 硬质塑料穿刺冲击性能的测定 第1部分：非仪器化冲击试验（ISO 6603-1:2000）

Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)

机械振动与冲击 结构状态监测的性能参数（ISO 16587:2004 等同采用）

Mechanical vibration and shock - Performance parameters for condition monitoring of structures (ISO 16587:2004, IDT)

机器状态监测和诊断 一般准则

Condition monitoring and diagnostics of machines - General guidelines

气动流体动力学 组件可靠性评估试验 第一部分：一般程序（ISO 19973-1:2007 IDT）

Pneumatic fluid power - Assessment of component reliability by testing - Part 1: General procedures (ISO 19973-1:2007, IDT)

基于风险的检查(RBI)推荐作法

Practice for risk-based inspection

输油站场管道和储罐泄漏的风险管理

Risk management of petroleum release from piping and tank of oil transport station

石油管材与装备材料失效分析导则

Pipeline Materials and Equipment Materials Failure Analysis Guide

机车车辆继电器和接触器可靠性试验规则

General rules for reliability test on board relays and contactors

电磁机械基本继电器 第2部分：可靠性

Electromagnetic mechanical basic relays Part 2: Reliability

干燥 固体绝缘材料 耐高压 低电流电弧放电试验 (IEC 61621:1997)

Dry@ solid insulating materials - Resistance test to high-voltage@ low-current arc discharges (IEC 61621:1997); German version EN 61621:1997

馆藏文物预防性保护装备 可靠性鉴定方法

Reliability appraisal method of preventive protection equipment for cultural relics in collections

通信用光电子器件可靠性试验方法

Reliability test method for optoelectronic devices used in telecommunications