美利体育登录入口官网

钢质管道外现场接缝涂层

External field joint coatings for steel pipelines

橡胶或塑料涂覆织物．聚氨酯涂敷机织织物规范

Rubber- or plastics-coated fabrics - Specification for polyurethane-coated woven fabrics

弹性封缝料的抗撕裂粘附力的标准试验方法

Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

胶粘剂的抗剥离性的标准试验方法(T型剥离试验)

Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

粘合剂剥离阻力的标准测试方法（T 型剥离测试）

Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

ASTM D 613-1995胶粘剂浮动滚轮抗剥离性的标准试验方法

Standard Test Method for Floating Roller Peel Resistance of Adhesives

胶粘连接中胶粘剂开裂时断裂强度的标准试验方法

Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

钩状和环状连接紧固件剥离强度 (T法) 的标准试验方法

Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners

压敏标签纸高速脱模的标准试验方法

Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

胶粘剂的90度抗剥离性能的标准试验方法

Standard Test Method for 90 Degree Peel Resistance of Adhesives

非增强聚氯乙烯土工膜贴边的标准规范

Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

粘合在混凝土或砖石衬底上的FRP层压板系统的拉脱强度的标准试验方法

Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates

粘合剂剥离或剥离强度的标准试验方法

Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

胶粘剂剥离强度的标准试验方法

Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

粘合剂的验方法.第C13部分:粘结部位机械试验.爬升式滚筒剥离试验

Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Climbing drum peel test

接触和闭合紧固件规范

Specification for Touch and close fasteners

碰触和闭锁扣件.剥离强度测定

Touch and close fasteners - Determination of peel strength

防水软板. 连接防剥离的测定. 防水塑料和橡胶薄板.

Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing

结构胶粘剂 柔性到柔性粘合组件的T型剥离试验ISO 11339:1993修改

Structural Adhesives - T-Peel Test for Flexible-to-Flexible Bonded Assemblies ISO 11339:1993 Modified

地板覆盖物用胶粘剂.机械性能和电气性能的要求

Adhesives for floor covering - Requirements for mechanical and electrical performance

粘合剂.粘合剂抗剥离强度的测定.浮辊法

Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method

皮革和鞋靴材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下粘合老化试验

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions

航空航天系列.非金属材料.结构胶粘剂.试验方法.金属蜂窝芯的剥离试验

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peeling test metal-honeycomb core

皮革和鞋类材料用粘合剂 粘合强度 最低要求和粘合剂分类

Adhesives for leather and footwear materials — Bond strength — Minimum requirements and adhesive classification

电阻焊 焊缝的破坏性测试 机械化剥离测试电阻点焊、缝焊和压花凸焊缝的试样尺寸和程序

Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds

印刷电子产品 材料 印刷胶卷 用90°剥离法测量柔性基板上印刷层的剥离强度

Printed electronics. Materials. Printed film. Measurement of peel strength for printed layer on flexible substrate by the 90° peel method

硫化橡胶或热塑性橡胶 测定对刚性基材的粘合力 软质热塑性弹性体层的粘合力

Rubber, vulcanized or thermoplastic?— Determination of adhesion to a rigid substrate - Adhesion of a soft thermoplastic elastomer layer

埋地排水用钢带增强聚乙烯（PE）螺旋波纹管

Metal reinforced polyethylene(PE) spiral corrugated pipe for underground sewer

聚氯丁二烯橡胶接着剂检验法

Method of Test for Polychloroprene Rubber Adhesives

鞋面印刷图层通用技术条件

General technical requirements for printed layers of shoe uppers

织物增强软管.第4部分:试验

Textile-reinforced hoses - Part 4: Testing

钢管和配件上的聚丙烯涂层 要求和测试

Polypropylene coatings on steel pipes and fittings - Requirements and testing

电子应用中的粘合 - 表面粘合强度 - 第 1 部分：拉伸测试

Adhesive bondings in electronic applications - Bonding strength on surfaces - Part 1: Tensile test

包装试验 包装膜试验方法 第2部分：麻布袋胶水缝合线的抗剥离能力的测定

Packaging test - Test methods for packaging films - Part 2: Determination of peel resistance of glued seams of sacks

包装试验.包装膜试验方法.第2部分:麻布袋胶水缝合线的抗剥离能力的测定

Packaging test - Test methods for packaging films - Part 2: Determination of peel resistance of glued seams of sacks

运动场地表面 合成表面接合强度的测定

Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013

防水软板.第1部分:屋顶防水沥青毡.接缝剥离阻力测定

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of peel resistance of joints; German version EN 12316-1:1999

柔性防水板第1部分：屋顶防水用沥青板

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of peel resistance of joints; German version EN 12316-1:1999

防水软板 连接件抗剥离性的测定 第2部分：屋顶防水用塑料和橡胶板（草案）

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

防水用柔性板 接缝抗剥离性的测定 第2部分：屋顶防水用塑料和橡胶板

Flexible sheets for waterproofing — Determination of peel resistance of joints — Part 2: Plastic and rubber sheets for roof waterproofing

热塑性半成品焊接接头试验.第4部分:剥离试验

Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2001

防水用柔性薄板.混凝土船桥甲板和其他车辆行驶的混凝土表面的防水性.粘结强度的测定

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength; German version EN 13596:2004

防水用柔性板 混凝土桥面和其他可车辆通行的混凝土表面的防水 粘结强度的测定

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength; German version EN 13596:2004

地板覆盖物的粘结剂 机械和电性能要求（草案）

Adhesives for floor coverings - Requirements for mechanical and electrical performance

球墨铸铁管、配件和附件.管外层聚乙烯涂层.要求和试验方法

Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; English version of DIN EN 14628:2005

粘合剂.高强度粘合剂的模板抵抗力的测定LUN卷帘试验

Adhesives – Determination of the formwork resistance of high-strength adhesives LUN roller shutter test

粘合剂.粘结的抗剥离性测定.浮辊法.德文版本EN 1464-2010

Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method; German version EN 1464:2010

粘合剂.粘合剂粘合抗剥离性的测定.浮辊法

Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method; German version EN 1464:2010

皮革和鞋类材料用粘合剂 溶剂型和分散体粘合剂 在规定条件下测试粘合老化

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions; German version EN 15062:2006

皮革和鞋靴材料用胶粘剂.上鞋底粘附力.最低强度要求

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; English version of DIN EN 15307:2007-08

皮革和鞋靴材料用胶粘剂.上鞋底粘附力.最低强度要求;德文版本EN 15307-2014

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; German version EN 15307:2014

航天产品保证 使用压敏胶带测量涂层和饰面的剥离和拉脱强度

Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes; English version EN 16602-70-13:2015

塑料 基于聚（氯乙烯）（PVC）的型材 箔层压型材剥离强度的测定（草案）

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils

塑料 基于聚（氯乙烯）（PVC）的型材 箔层压型材剥离强度的测定

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils

塑料 聚氯乙烯（PVC）基型材 箔层压型材剥离强度的测定

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils; German version EN 17271:2019

热塑性和弹性体防水卷材 层间剥离强度的测定

Determination of interlayer peel strength of thermoplastic and elastomeric waterproof membranes

结构胶粘剂

Structural Adhesives

航空航天系列.非金属材料.结构胶粘剂.试验方法.第3部分:金属蜂窝状夹芯材料的剥离试验

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005

胶粘剂—剥离试验

Adhesives; Peel test for a flexible-bonded-to-rigid test specimen assembly

鞋 磨损外底的试验方法 裂纹撕裂强度和分层阻力的测定（ISO/DIS 20875:2016）

Test methods for worn outsoles of footwear - Determination of crack tear strength and delamination resistance (ISO/DIS 20875:2016)

鞋靴.附件的试验方法.粘扣.反复闭合前后的剥离强度

Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004); German version EN ISO 22777:2004

鞋类 附件的测试方法：接触和闭合紧固件 重复闭合前后的剥离强度

Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004); German version EN ISO 22777:2004

色漆和清漆. 剥离试验,通过剥离强度试验和拉伸剪切强度试验以及附加应力并项试验或催化剂贮存来评价弹性粘合剂在涂料上的附着力的试验方法(ISO 22970-2019); 德文版本EN ISO 22970-2020

Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019); German v

弹性地板覆盖物 抗剥离性的测定

Resilient floor coverings - Determination of peel resistance (ISO 24345:2006); German version EN ISO 24345:2012

输送带.结构组件间的附着力.试验方法(ISO 252:2007)

Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2007); English version of DIN EN ISO 252:2008-01

粘合剂 软质与硬质粘合试样组件的剥离试验 第2部分：180°剥离（草案）

Peel testing of adhesive soft and hard bonded specimen assemblies Part 2: 180° Peel (Draft)

橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析(ISO 6133-2015)

Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)

橡胶、硫化或热塑性橡胶 与刚性基底粘附性的测定 第2部分：软热塑性弹性体层的粘附性（ISO 813-2:2024） 德文和英文文本

Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - Part 2: Adhesion of a soft thermoplastic elastomer layer (ISO 813-2:2024); Text in German and English

DVGW W 330 粘贴用网状管道衬里技术条件

Technical Requirement for Glued Network Pipe Lining

球墨铸铁管,配件和附件.管外层聚乙烯涂层.要求和试验方法

Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods

警服材料 热封胶带

Material for police uniform-Hot-sealing adhesive tape

居民身份证卡体材料及打印薄膜技术规范 第5部分：打印薄膜

Resident ID card body material and printing film technical specification Part 5: Printing film

建筑密封材料试验方法 第18部分;剥离粘结性的测定

Test method for building sealants Part 18: Determination of adhesion-in-peel

硫化橡胶与金属粘接180°剥离试验

Rubber, vulcanized--Determination of adhesion to metal-180°Peel test method

埋地钢质管道腐蚀防护工程检验

Inspection of corrosion protection for buried steel pipelines

粘扣带

Touch and close fasteners

胶粘带剥离强度的试验方法

Measurement of peel adhesion properties for adhesive tapes

矿脂防蚀带低温可操作性美利体育登录入口官网方法

Test method of operability of petrolatum tape at low temperature

鞋类.粘扣带试验方法.反复开合前后的剥离强度

Footwear.Test methods for accessories: Touch and close fasteners.Peel strength before and after repeated closing

鞋类.整鞋试验方法.剥离强度

Footwear.General test methods.Peeling strength

涂附磨具剥离强度测试方法

Test method for peel strength of coated abrasives

高强度胶粘剂剥离强度的测定 浮辊法

Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method

耐高温胶粘剂/密封剂高温力学性能测试方法 第2部分：剥离强度

Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 2: Peel strength

夹层结构及芯子性能试验方法 第8部分：夹层结构90°剥离试验方法

Sandwich structure and core performance test methods Part 8: 90° peel test method for sandwich structures

低速摆动自润滑向心关节轴承规范

Specification for low-speed oscillating and self-lubricating radial spherical plain bearings

J-系列高温固化载体结构胶膜规范

Specification for J-series carrier structural adhesive films curing at high temperature

纺织搭扣.剥离强度的测定法

Textile fastener. Method for determination of delamination strength

聚合物复合材料 浮辊法测定高强度胶粘剂的抗剥离性

Polymer composites. Determination of peel resistance of high-strength adhesive bonds by Floating-roller method

纺织品. 橡胶或塑料涂层织物. 涂层粘度的测定方法

Textiles. Rubber- or plastics-coated fabrics. Method for determination of coating adhesion

铝合金化学铣切保护涂料规范

Specification for maskant of chemical milling for aluminium alloy

牛皮纸压敏胶粘带

Kraft Paper Pressure Sensitive Adhesive Tape

快速粘接输送带用氯丁胶粘剂

Polychloroprene Rubber Based Adhesive for Quick Bonding Conveyor Belts

溶剂型多用途氯丁橡胶胶粘剂

Multi-purpose solvent-based polychloroprene adhesives

化工用塑料管道粘接 剥离美利体育登录入口官网方法

Peeling test of bonding for plastics pipeline on chemical industry

复合软包装用双组份聚氨酯胶粘剂

Two-component polyurethane adhesive for composite flexible packaging

印刷电子.第202-7部分:材料.印刷薄膜.用90°剥离法测量柔性衬底上印刷层的剥离强度

Printed electronics - Part 202-7: Materials - Printed film - Measurement of peel strength for printed layer on flexible substrate by 90° peel method

塑料. 塑料金属组件中粘结界面性能的评估. 第3部分: 试验方法

Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 3: Test methods

石油和天然气工业 管道运输系统用掩埋于地下或淹没于水下的管道外部涂层 第4部分 聚乙烯涂层(2层PE)

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 4: Polyethylene coatings (2-layer PE)

鞋类.鞋附件的试验方法:粘扣.反复闭合前后的剥离强度

Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing

色漆和清漆.用剥离试验、剥离强度试验和拉伸搭接剪切强度试验（用冷凝试验或巴布剂贮存法测定附加应力）评定弹性粘合剂在涂层上粘附性的试验方法

Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensati

板材的机械连接. 接头的破坏性试验. 单接头的机械剥离试验的试样尺寸和程序

Mechanical joining of sheet materials - Destructive testing of joints - Specimen dimensions and procedure for mechanized peel testing of single joints

粘合剂 高强度粘合体抗剥离性的测定 摆动辊法

Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating-roller method

室内装饰用塑料涂覆织物.第2部分:聚氯乙烯涂覆纺织品的规范

Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics

填充聚四氟乙烯导轨软带

Filled polytetrafluoroethylene slideway soft strips

坡屋面用防水材料.自粘聚合物沥青防水垫层

Waterproof materials for pitched roof Underlayments of self adhering polymer modified bituminous

自粘聚合物沥青泛水带

Self adhering polymer modified bituminous flashing strip

喷涂聚脲用层间处理剂

Lapping adhesive for spray polyurea layer agents

盘式制动块消音片剥离强度试验方法

Anti-noise brake pads shims: T-pull test

建筑装饰用不燃级金属复合板

Non-combustible metal composite panels for building decoration

抹灰用金属网片(修改件1)

Lath sheets (Amendment 1)

牙科金-银-钯合金焊料

Dental gold-silver-palladium alloy solders

牙科用金焊料

Dental gold alloy solders

聚乙烯涂层纸

Polyethylene coated paper

公路工程土工合成材料 复合材料的分类、性能要求和试验方法

Geosynthetics in highway engineerings Sort, capability demand and test method of composite materials

胶粘剂 柔性对柔性粘接组件的T-型剥离试验（ISO 11339:2010 IDT）

Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010, IDT)

煤矿带式输送机滚筒用橡胶包覆层技术条件

The specification of belt conveyor roller's rubber cover used in coal mine

NACE国际测试方法TM21420-2018

NACE International Test Method TM21420-2018

家禽拔毛专用蜡

Poultry defeathering wax

卫生和家庭用品 卫生巾、内裤衬垫、失禁垫和类似的粘合产品 通过测量剥离强度测定粘合性

Articles for sanitary and domestic uses - Period pads, panty liners, incontinence pads and similar adhesively attached products - Determination of adhesiveness by measuring peeling resistance

皮凉鞋

leather sandals

牙膏用全塑复合软管

Plastic Barrier Laminate Tube for Toothpaste

家具表面软质覆面材料剥离强度的测定

Determination of peel strength of flexible overlaid materials in furniture surface

汽车用折边胶

Hemming adhesive for automobile

垫片库存 层压

Shim Stock@ Laminated

软修剪胶粘剂抗剥强度的推荐实施规程.1994年4月

Peel Strength of Soft Trim Adhesives@ Recommended Practice

玻璃与汽车玻璃封装用弹性材料的剥离粘性试验

Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation@ Recommended Practice

食品用塑料、铝箔复合自立袋检验规程

Rules for the inspection of composite laminated self-supporting bag for food packaging of plastics materials and aluminum foil

柔性防水膜材 接缝剥离强度的测定 第2部分:屋顶用塑料和橡胶防水膜材

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

球墨铸铁管、管件和附件 管道外部聚乙烯涂层 要求和试验方法

Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods

皮革和鞋类材料用粘合剂 鞋底与帮面结合 最低强度要求

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

塑料 聚氯乙烯（PVC）基型材 带有箔层压型材剥离强度的测定

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils

鞋类 配件试验方法：接触式紧固件 重复闭合前后的剥离强度

Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004)

涂料和清漆 通过剥离试验、剥离强度试验和固化试验或膏药储存额外应力下的拉伸层合剪切强度试验评估弹性粘合剂在涂层上的附着力（ISO 22970:2019）

Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019)

硫化橡胶或热塑性橡胶 刚性基材粘附性的测定 第2部分：软质热塑性弹性体层的粘附性（ISO 813-2:2024 IDT）

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer (ISO 813-2:2024, IDT)

锂电池用膨胀胶带技术规范

Technical specification for expansion tapes for lithium batteries

防水用柔性板材接缝抗剥离性的测定第2部分：屋面防水用塑料和橡胶板材

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

球墨铸铁管、管件和附件 管道的外部聚乙烯涂层 要求和试验方法

Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods

塑料 聚氯乙烯（PVC）型材 箔层压型材剥离强度的测定

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils

印刷电路的基础材料 第2部分：规格 规范编号 13：柔性包铜聚酰亚胺薄膜，通用级

BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION No 13: FLEXIBLE COPPER-CLAD POLYIMIDE FILM, GENERAL PURPOSE GRADE.

印刷电路基材 第2部分：规范 规范第 16 号：规定可燃性（垂直燃烧试验）的聚酰亚胺玻璃纤维布覆铜层压板

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 16: Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).

电阻焊 焊缝的破坏性测试 机械化剥离测试电阻点焊、缝焊和压花凸焊缝的试样尺寸和程序

Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016)

测试热塑性弹性体 (TPE) 对基材的粘合力 注塑基材

Testing the adhesion of TPE on substrates - Injection moulded substrates

测试热塑性弹性体（TPE）在基材上的附着力

Testing the adhesion of thermoplastic elastomers (TPE) on substrates

自粘结涂层电工钢 剥离试验方法

Peel test method for self-adhesive coated electrical steel

聚酯/低密度聚乙烯药品包装用复合膜、袋

Juzhi/DimiduJuyixiYaopinbaozhuangyong Fuhemo、Dai Laminated Films and Pouches (PET/LDPE) for Pharmaceutical Packaging

药用聚乙烯/铝/聚乙烯复合软膏管

Composite Pipe (PE/AL/PE) for Pharmaceutical Cream Packaping

烟用拉线

Tear band for cigarette

通信电缆光缆用金属塑料复合带 第1部分：总则

Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable Part 1:General

邮件包装袋.第1部分:气垫膜包装袋

Packing bags for postal parcels Part 1:Packing bags for air spring film