美利体育登录入口官网

齿轮齿的外观.磨损和缺陷术语

Appearance of Gear Teeth - Terminology of Wear and Failure

骨料取样和测试方法 方法 27：耐磨性

Methods for sampling and testing aggregates, Method 27: Resistance to wear by attrition

纺织品的试验方法.物理试验..用Martindale法测定织物的耐磨性.样品破裂的测定

Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown

透明塑料软片表面耐摩擦性的标准试验方法

Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

碳黑、球状细粒磨损的标准试验方法

Standard Test Method for Carbon Black, Pelleted Fines and Attrition

炭黑、球状细粒磨损的标准试验方法

Standard Test Method for Carbon Black, Pelleted Fines and Attrition

炭黑 颗：湍ニ鸬谋曜际匝榉椒

Standard Test Method for Carbon Black, Pelleted Fines and Attrition

流体润滑剂磨损性能测定的标准试验方法（Falex销和V形块法）

Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法

Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

在摆动运动中使用(法列克司)环和块磨擦试验机测定润滑脂防磨性的标准试验方法

Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

环形试验机上的（Falex）块在摆动运动中对润滑脂的磨损预防性能的标准试验方法

Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

催化剂和催化剂载体的磨损和磨损的标准试验方法

Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

催化剂及其载体磨损的标准试验方法

Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

纺织品耐磨性能标准指南（均匀磨损）

Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)

润滑液防磨损特性的标准试验方法（四球法）

Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

润滑剂防磨损特性的标准试验方法（四球法）

Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

与织物和织物测试方法相关的标准术语

Standard Terminology Relating to Fabrics and Fabric Test Methods

土工织物的耐磨性标准试验方法 (砂纸/滑块法)

Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)

土工织物耐磨性标准试验方法（砂纸/滑块法）

Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)

评估牵引车液压液磨损特性的标准试验方法

Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

用高频线性振荡（SRV）试验机测量润滑脂摩擦磨损性能的标准试验方法

Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

用高频线性振荡（SRV）试验机测量润滑脂摩擦磨损性能的标准试验方法

Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

使用中的润滑剂颗粒微观表征的标准指南

Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

通过分析铁路从在役润滑剂的微粒表征的标准实践

Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

采用模挤压法和制备法测量润滑脂的流动性以及评估润滑脂磨耗, 污染和氧化性能的标准试验方法

Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

汽车发动机机油在序列IVB点燃式发动机中评估的标准试验方法

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine

由粒状杀虫剂的磨损得到的粒子的测定用标准试验方法

Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

使用模拟器美利体育官网首页网址对假体髋关节设计进行重量法磨损评估的标准指南

Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices

用泰伯磨耗试验机测定金属化热喷射涂层抗磨损性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

总脊面假体的功能的、运动学的和磨损的评估标准指南

Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses

防脊椎盘突出植入物静态、动态及磨损评定的标准试验方法

Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants

椎间盘外单节段脊柱植入物静态、动态和磨损评估标准测试方法

Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs

运动保留型腰椎全小关节假体功能和磨损评估的标准试验方法

Standard Test Method for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses

检索金属金属和其他硬硬髋关节假体从铰接表面磨损表征的标准指南

Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses

确定磨损与腐蚀之间协同作用的标准指南

Standard Guide for Determining Synergism Between Wear and Corrosion

用块环磨损试验为材料抗滑动磨损分级的标准试验方法

Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

磨损和摩擦测量中数字数据采集的标准指南

Standard Guide for Digital Data Acquisition in Wear and Friction Measurements

磨擦环接触法测量材料耐磨性的标准试验方法

Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

用块环磨损试验评定塑料抗滑动磨损等级的标准试验方法——累积磨损法

Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method

开发和选择磨损试验的标准指南

Standard Guide for Developing and Selecting Wear Tests

有关磨损和侵蚀的标准术语

Standard Terminology Relating to Wear and Erosion

与磨损和侵蚀有关的标准术语

Standard Terminology Relating to Wear and Erosion

关于磨损和侵蚀的标准术语

Standard Terminology Relating to Wear and Erosion

有关磨损和侵蚀的标准术语

Standard Terminology Relating to Wear and Erosion

与磨损和侵蚀相关的标准术语

Standard Terminology Relating to Wear and Erosion

管道涂层耐磨性的标准试验方法

Standard Test Method for Abrasion Resistance of Pipeline Coatings

采用干砂/橡胶轮装置测量磨蚀性的标准试验方法

Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

用针盘仪进行磨损试验的标准试验方法

Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

ASTM标准手册56——摩擦、磨损和侵蚀测试指南

Guide to Friction, Wear, and Erosion Testing

润滑剂化学、技术、选择与设计全面回顾

A comprehensive review of lubricant chemistry, technology, selection and design

弹性体的磨损与摩擦

Wear and Friction of Elastomers

机械刚度和振动对磨损的影响

Effects of mechanical stiffness and vibration on wear

表面涂层和处理对磨损的影响

Effects of surface coatings and treatments on wear

磨损过程在制造中的应用

Application of Wear Processes in Manufacturing

侵蚀、磨损和腐蚀界面

Erosion, Wear, and Interfaces with Corrosion

材料在磨蚀条件下的评价

Evaluation of materials under abrasive conditions

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

齿轮.齿轮齿的磨损和损伤.术语

Gears - Wear and damage to gear teeth - Terminology

砂浆路面层.试验方法.磨损性测定

Slurry surfacing. Test methods. Determination of wearing

粘贴锁紧件.洗后的耐缝纫性

Touch and close fasteners - Determination of resistance to fraying after washing

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

塑料 采用紫外线照射和机械磨损相结合的人造草坪磨损试验方法

Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear

滑动轴承 术语、定义、分类和符号 摩擦和磨损

Plain bearings. Terms, definitions, classification and symbols. Friction and wear

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears – Wear and damage to gear teeth – Part 1: Nomenclature and characteristics

复合气瓶定期检验与评定

Periodic inspection and assessment of composite gas cylinders

在用电梯曳引轮本体安全评估规程

Safety assessment procedures for the traction sheave body of elevators in use

牙科材料.磨损试验指南.第1部分:牙刷磨损

Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)

牙科材料 磨损测试指南 第1部分：刷牙磨损

Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)

耐磨损合金铸铁

Abrasion resisting alloyed cast iron

牙科 平面区域密封剂的磨损测试

Dentistry - Abrasion testing for flat area sealers

维护基础知识

Fundamentals of maintenance

维护基础

Fundamentals of maintenance

带直角横轴轴向的圆筒形蜗杆副承载能力的计算

Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes

搪瓷和瓷釉 耐水磨性的测定 第2部分：涂层厚度的局部损失

Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 2: Local loss in coating thickness

无机非金属材料的测试 根据 Boehme 使用砂轮进行磨损试验 砂轮法

Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method

无机非金属材料的测试 根据 Boehme 使用砂轮进行磨损试验 砂轮法

Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method

无机非金属材料的测试 根据 Boehme 使用砂轮进行磨损试验 砂轮法

Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method

纸和纸板的测试.摩擦轮法测定磨蚀度

Testing of paper and board - Determination of abrasion by the abrasion wheel method

纸和纸板的测试.用磨耗轮法测定磨耗

Testing of paper and board - Determination of abrasion by the abrasion wheel method

油漆和清漆 磨损行为的测定

Paints and varnishes - Determination of abraison behaviour

颜料测试 测定粒状炭黑颜料的细粉含量和磨损质量损失

Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments

塑料管道系统 玻璃纤维增强热固性塑料（GRP）基于不饱和聚酯树脂（UP） 确定规定次数循环后的平均磨损报告

Plastic piping systems Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) Determination of the average wear report after a specified number of cycles

骨料机械和物理性能试验 第9部分：镶钉轮胎耐磨性的测定北欧试验

Tests for mechanical and physical properties of aggregates — Part 9: Determination of the resistance to wear by abrasion from studded tires — Nordic test

泥浆表面修整.试验方法.第5部分:磨损性测定

Slurry surfacing - Test method - Part 5: Determination of wearing; German version EN 12274-5:2003

沥青混合物 试验方法 第16部分：镶钉轮胎的磨损（草案）

Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres

沥青混合物 试验方法 第17部分：多孔沥青试样的颗粒损耗（草案）

Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens

航空航天系列.航空用光缆.试验方法.第511部分:电缆间的磨损; 德文和英文版本 EN 3745-511:2002

Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002

弹性地面覆盖物 磨损耐久性测定 第一部分: 斯图加特测试

Resilient floor coverings – Determination of wear resistance – Part 1: Stuttgart test

致密成型耐熔制品的试验方法.室温下抗磨性的测定

Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007); German version EN ISO 16282:2008

石油及相关产品 用4球法测定润滑油的极限压力和耐磨性(欧洲条件)（草案）

Determination of ultimate pressure and wear resistance of lubricating oils using the 4-ball method for petroleum and related products (European conditions) (draft)

橡胶或塑料涂层织物.抗复合弯曲剪切和磨损的测定

Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007); English version of DIN EN ISO 5981:2008-01

涂料和清漆.耐磨性的测定.第1部分:使用研磨纸覆盖轮和旋转试样的方法(ISO 7784-1-2016).德文版本EN ISO 7784-1-2016

Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016); German version EN ISO 7784-1:2016

滑动轴承 术语、定义、分类和符号 第2部分：摩擦和磨损

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear

滑动轴承 术语、定义、分类和符号 第 2 部分：摩擦和磨损

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear

滑动轴承.术语、定义、分类和符号.第2部分:摩擦和磨损(ISO 4378-2-2009)

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear (ISO 4378-2:2009)

滑动轴承 术语、定义、分类和符号 第2部分：摩擦和磨损

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear (ISO 4378-2:2009)

塑料 砂轮耐磨性的测定

Plastics - Determination of resistance to wear by abrasive wheels

塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP).关于确定数量试验循环后平均磨损测定的报告;德文版本CEN/TR 15729-2010

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles; German version CEN/TR 15729:2010

耐磨管道技术条件

Specification for wear-resistant pipes

呼吸器用复合气瓶定期检验与评定

Periodic inspection and evaluation of composite cylinders for breathing apparatus

摩擦学术语

Tribology terminology

振动筛.筛板磨耗

Vibrating screen.Wear consumption of screen plate

滑动轴承 术语、定义、分类和符号 第2部分:摩擦和磨损

Plain bearings—Terms, definitions，classification and symbols—Part 2：Friction and wear

橡胶或塑料涂覆织物 耐磨性的测定 泰伯法

Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader

光缆总规范 第21部分：光缆基本试验方法 机械性能试验方法

Optical fibre cable generic specification—Part 21：Basic optical cable test procedures—Mechanical test methods

变性木材.磨耗测定法

Modified wood. Method for determination of wear-proofness

石油和相关产品. 四球机上流体的极限压力和耐磨特性测定 (欧洲条件)

Petroleum products. Liquid lubricants. Determination of the extreme-pressure and anti-wear properties of fluids on four ball mashine (european conditions)

Thribo技术要求与指数.供应原则.概述

Thribotechnical requirements and indexes. Principles of provision. General

改性木材. 耐磨性和摩擦系数的测定方法

Modified wood. Method for determining the wear resistance and friction coefficient

外科植入物. 全髋关节假体的磨损. 第2部分. 测量方法

Implants for surgery. Wear of total hip-joint prostheses. Part 2. Methods of measurement

螺丝 螺丝磨损和损坏 部分1：命名与特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

可穿戴电子美利体育官网首页网址和技术 - 第201-4部分：电子纺织品 - 导电织物磨损后表面电阻测定试验方法

Wearable electronic devices and technologies - Part 201-4: Electronic textile - Test method for determining sheet resistance of conductive fabrics after abrasion

骨料 用Micro-Deval美利体育官网首页网址测定石质骨料的抗磨损性

Aggregates. Determination of the resistance to the abrasion of the stony aggregates with the Micro-Deval equipment.

润滑剂 抗磨性能估算 四球法

Lubricants. Estimate of wear preventive characteristics. Four-Ball Method.

齿轮.轮齿的磨损和损坏.第1部分：术语和特性

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

外科植入物.总的髋关节假肢的磨损.第2部分:测量方法

Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement

外科植入物.总的膝关节假肢的磨损.第2部分:测量方法

Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement

齿轮.FZG试验程序.第3部分:半流齿轮润滑脂压塑性变形承载能力和耐磨性用A/2、8/50 FZG试验方法

Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases

滑动轴承.术语,定义,分类和符号.第2部分:摩擦和磨损

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear

滑动轴承.术语,定义,分类和符号.第2部分:摩擦和磨损

Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear

滑动轴承术语 定义 分类和符号第2部分:摩擦和磨损

Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear

塑料.滑动摩擦和磨损.试验参数的确定

Plastics - Friction and wear by sliding - Identification of test parameters

塑料 用磨轮测定抗磨耗性能

Plastics - Determination of resistance to wear by abrasive wheels

齿轮.轮齿的磨损和损坏.第2部分:补充信息

Gears — Wear and damage to gear teeth — Part 2: Supplementary information

牙科材料.磨损试验指南.第1部分:牙刷磨损

Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing

牙科材料 耐磨损试验指南 第2部分：2和/或3体磨耗法

Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact

正齿轮和斜齿轮承载能力的计算第20部分:胶合承载能力的计算闪蒸温度法

Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity — Flash temperature method

建筑物材料及建筑物结构部件的磨损试验方法(砂纸法)

Methods of abrasion test for building materials and part of building construction (Abrasive-paper method)

滑动轴承.术语、定义和分类.第2部分:摩擦和磨损

Plain bearings -- Terms, definitions and classification -- Part 2: Friction and wear

润滑剂承载能力试验方法

Testing Methods for Load Carrying Capacity of Lubricating Oil

一种新型湿滑摩擦磨损试验方法的开发与初步评估

Development and preliminary evaluation of a new wet-slip friction and wear test method

油气行业固态侵蚀管理

Solid Erosion Management in the Oil and Gas Industry

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

齿轮 - 齿的磨损和缺陷 - 第 1 部分：术语和特性

Gears - Wear and defects of teeth - Part 1: Nomenclature and characteristics

牙科材料 磨损测试指南 刷牙磨损

Dental materials. Guidance on testing of wear. Wear by toothbrushing

鞋用材料耐磨性能试验方法(Taber耐磨试验机法)

Test method for abrasion resistance of footwear materials (Taber abrader)

检查磨损的渐开线花键

Inspection of Worn Involute Splines

用于燃气发动机油润滑能力测定的航空工业润滑剂摩擦学评估者(ALTE)方法

Aviation Lubricant Tribology Evaluator (ALTE) Method to Determine the Lubricating Capability of Gas Turbine Lubricants

进出口食品包装卫生规范.第5部分:金属包装

Hygienic specification of export and import food packaging.Part5:Metal packaging

集料机械和物理性能试验 第9部分:防滑钉轮胎耐磨性的测定 北欧试验

Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test

污泥铺面 试验方法 第5部分：最小粘结剂含量和耐磨性的确定

Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance

沥青混合料 试验方法 第16部分：带钉轮胎磨耗试验

Bituminous mixtures — Test methods — Part 16: Abrasion by studded tyres

民用爆炸物 雷管和传爆管 第4部分:引线和激波管耐磨性的测定

Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes

牙科 粉末喷射手piece和粉末（ISO 20608:2018）

Dentistry - Powder jet handpieces and powders (ISO 20608:2018)

集料的机械和物理性能试验 第9部分：镶钉轮胎耐磨性的测定 北欧试验

Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test

航空航天系列 光纤和电缆、光学、飞机用途 测试方法 第511部分：电缆间磨损

Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 511: Cable to cable abrasion (Endorsed by AENOR in August of 2002.)

弹性地板覆盖物 常规图案深度的确定

RESILIENT FLOOR COVERINGS. DETERMINATION OF CONVENTIONAL PATTERN DEPTH.

石油及相关产品 润滑剂极压和抗磨性能的测定 四球法（欧洲条件）

Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)

齿轮 轮齿的磨损和损坏 第1部分：术语和特性

Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics

失效分析 金属产品因摩擦学条件引起的损伤

Failure analysis of metal products due to damage caused by tribological conditions

失效分析 由摩擦学引起的应力引起的由塑料制成的热塑性产品的缺陷

Failure analysis - Defects of thermoplastic products made of plastics caused by tribology-induced stress

门禁控制系统运行手册

Operating manual for access control systems VdS 3436 : 2005-08

解释性报告 堆焊和磨损

Interpretative Report Hardfacing and Wear