美利体育登录入口官网

橡胶O形圈的标准试验方法

Standard Test Methods for Rubber O-Rings

螺旋抗挤压挡圈及其轴承座的尺寸 规范

Dimensions of spiral anti-extrusion back-up rings and their housings. Specification

液压流体动力.在压力25 MPa 和40 MPa(250 巴 和400 巴)条件下使用的四螺钉、单片正方形法兰连接器

Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)

航空航天系列.带锁紧螺纹接合器用O型密封圈.调查

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey

航天系列 氟橡胶（FKM）O型圈 低压缩变形 硬度80 IRHD

Aerospace series?— O-rings, in fluorocarbon rubber (FKM), low compression set?— Hardness 80 IRHD

碳氟橡胶制低压缩永久变形O形环.技术规范

O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

航天系列 氟碳橡胶（FKM）O型圈 低压缩形变 技术规范

Aerospace series?— O-rings, in fluorocarbon rubber (FKM), low compression set?— Technical specification

气体氢燃料 加气站 橡胶O型环

Gaseous hydrogen. Fuelling stations - Rubber O-rings

真空技术 对夹式快速接头尺寸

Vacuum technology. Dimensions of clamped-type quick-release couplings

流体动力系统 O 形圈 内径、横截面、公差和名称代码

Fluid power systems. O-rings - Inside diameters, cross-sections, tolerances and designation codes

流体动力系统 — O 形圈 第2部分：一般应用的外壳尺寸

Fluid power systems — O - rings Part 2 : Housing dimensions for general applications

流体动力系统 O 形圈 质量验收标准

Fluid power systems. O-rings - Quality acceptance criteria

流体动力系统 — O 型圈 第5部分：工业应用弹性材料规范

Fluid power systems — O - rings Part 5 : Specification of elastomeric materials for industrial applications

航空航天系列 氟橡胶 (FKM) O 形圈 低压缩永久变形 硬度 80 IRHD

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

气态氢 加氢站 第7部分：橡胶O型圈

Gaseous hydrogen – Fuelling stations – Part 7: Rubber O-rings

食品和化学工业用不锈钢配件 第1部分：短型卫生螺纹管接头

Stainless steel fittings for the food and chemical industry - Part 1: Hygienic screwed pipe connection, short type

食品和化学工业用不锈钢配件 第1部分：短型卫生螺纹管接头

Stainless steel fittings for the food and chemical industry - Part 1: Hygienic screwed pipe connection, short type

食品工业中卫生应用的不锈钢组件 第2部分：法兰连接

Stainless steel components for hygienic applications in the food industry - Part 2: Flange connections

食品工业卫生用途不锈钢部件 第3部分：卡箍连接

Stainless steel components for hygienic applications in the food industry - Part 3: Clamp connections

用于化学和制药行业无菌应用的不锈钢部件 第2部分：法兰连接

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 2: Flange connections

压缩接头用O形圈密封锥（24°）

Compression fittings - Nipple (24°) with O-ring - for compression joint according to DIN EN ISO 8434-1

非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直柱式旋转管接头

Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1

非焊接压缩耦合件.根据DIN EN ISO 8434-1压缩端型用喇叭形连接件

Non soldering compression couplings - Flared connection parts for type of compression end according to DIN EN ISO 8434-1

航空航天.密封圈.尺寸规格,质量

Aerospace - Sealing rings - Dimensions, masses

航空航天系列. 电导体压接用端子衔套和内嵌式接合. 第007部分: 英制系列螺柱用镀镍铝芯电缆压接时使用的镀镍滤铝制端子衔套. 产品标准; 德文和英文版本EN 3373-007-2012

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard; German and English version E

航空航天系列.管连接件.丁腈橡胶制成的O形环.75IRHD.温度范围:-55℃到+135℃

Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 °C to 135 °C; German and English version EN 3663:2001 + AC:2003

航空航天系列 管接头 橡胶 NBR O 形圈 75 IRHD 温度范围： 55°C 至 135°C

Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 °C to 135 °C; German and English version EN 3663:2001 + AC:2003

航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80 IRHD

Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2007

航空航天系列 管接头 60° 球形 钛合金 TI-P64001 端口连接

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Port connection; German and English version EN 4051:2002 / Note: Applies in conjunction with DIN EN 3853 (2004-08).

航空航天系列 管道接头 60° 球形 钛合金 TI-P64001 适配器 直型 双端 带锁紧环

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring; German and English version EN 4510:2018

气体容器 用于压缩呼吸空气的气瓶阀门连接件 第1部分：卡箍类型连接（ISO 12209-1:2000）

Gas containers - Connections for valves on cylinders for compressed breathing air - Part 1: Clamp-type connections (ISO 12209-1:2000)

气瓶 用于将阀门连接到气瓶的平行螺纹 第1部分：规范

Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021); German version EN ISO 15245-1:2021

液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)

液压流体动力和一般用途的连接 软管接头 第 2 部分：带有 ISO 8434-1 24° 锥形连接器端部和 O 形圈的软管接头（ISO 12151-2:2022）

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings (ISO 12151-2:2022); Text in German and English / Note: Date of issue 2023-09-29*Intended as replacement ...

液压流体动力和一般用途的连接 软管接头 第2部分：带O形圈的ISO 8434-1 24锥形连接端软管接头（ISO 12151-2:2022）

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24？ cone connector ends with O-rings (ISO 12151-2:2022)

液压流体动力和一般用途的连接 软管接头 第2部分：带 ISO 8434-1 24? 锥形连接器端和 O 形圈的软管接头（ISO 12151-2:2022）

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24? cone connector ends with O-rings (ISO 12151-2:2022)

液压动力系统.O型环.第1部分:内径,截面,公差和命名规范(ISO 3601-1-:2012 + Cor. 1:2012)

Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012)

液压动力系统.O型环.第1部分:内径,截面,公差和命名规范(ISO 3601-1-2012+Cor.1-2012)

Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012)

液压动力系统.O型环.第3部分:质量验收准则(ISO 3601-3-2005)

Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005)

液压动力系统.O型环.第4部分:反式挤压环(支撑环)(ISO 3601-4-2008)

Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008)

流体动力系统 O 形圈 第4部分：防挤压环（支撑环）

Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008)

航空航天系列.钛合金60度球形管道联轴节.总装建议 (AECMA 技术报告 TR 4052:1995)

Aerospace series - Pipe couplings 60 °, spherical, in titanium alloy - Assembly recommendations (AECMA Technical Report TR 4052:1995)

液压流体传动和一般用途的管接头.带ISO 261 m制螺纹和O形密封圈的油口和螺纹端头.第2部分:重型(S系列)螺柱端头的尺寸,设计,试验方法和要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)

液压传动连接.带米制螺纹和O形圈密封的油口和螺柱端.第2部分：重型螺柱端（S系列）

Connections for hydraulic fluid power.Ports and stud ends with metric threads and O-ring sealing.Part 2:Heavy-duty stud ends(S series)

液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第3部分：轻型螺柱端（L系列）

Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series)

法兰式管接头

Flange connections

液压传动连接 测压接头 第1部分：非带压连接式

Connections for hydraulic fluid power—Couplings for diagnostic purposes—Part 1: Coupling not for connection under pressure

液压传动连接 法兰连接 第1部分：3.5MPa~35 MPa、3~DN127系列

Connections for hydraulic fluid power—Flange connections—Part 1: Series of 3.5 MPa to 35 MPa, DN13 to DN127

车用高压储氢气瓶组合阀门

Combination valve for high-pressure hydrogen storage cylinders for vehicles

耐燃油氟硅橡胶材料规范

Specification for fuel-resistant fluorosilicone rubber materials

液压传动和一般用途用管道连接.带有米制螺柱端和O型圈的软管接头.规范

Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements

耐磷酸酯液压油Ｏ形橡胶密封圈

Phosphate ester hydraulic oil resistant O-ring rubber seal

真空技术 快装卡箍连接 尺寸

Vacuum Technology. Clamping-Type Quick Couplings. Dimensions.

通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第3部分:带扣环O型密封圈(G型和H型)密封的轻型(L系列)螺柱端头

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)

液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24?锥形末端的软管接头

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings

航空航天流体系统. O 形圈 英制系列：内径和横截面积、公差和尺寸识别码. 第 1 部分：液压系统的紧公差

Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems

航空航天液压系统.英制系列O型密封圈:内直径和横截面,公差和尺寸认证编码.第1部分:液压系统近似公差

Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems

航空航天流体系统.英制系列O型密封圈:内直径和横截面、公差和尺寸识别码.第2部分:非液压系统的标准公差

Aerospace fluid systems - O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes - Part 2: Standard tolerances for non-hydraulic systems

气体氢 加氢站 第7部分：橡胶O型环

Gaseous hydrogen - Fuelling stations - Part 7: Rubber O-rings

航空航天系列. O形环槽. 尺寸

Aerospace series - O-ring grooves - Dimensions

航空航天系列O形环槽尺寸修改1

Aerospace series — O-ring grooves — Dimensions — Amendment 1

液压动力系统.O形密封圈.第2部分:通用外壳尺寸

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications

液压动力系统.O形密封圈.第2部分:通用外壳尺寸

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications

流体动力系统 O型圈 第2部分：通用应用的外壳尺寸

Fluid power systems — O-rings — Part 2: Housing dimensions for general applications

流体动力系统 O型密封圈.第3部分:质量验收准则

Fluid power systems - O-rings - Part 3: Quality acceptance criteria

流体动力系统.0型密封圈.第5部分:工业用弹性材料的适宜性

Fluid power systems - O-rings - Part 5: Suitability of elastomeric materials for industrial applications

用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头的尺寸、设计、试验方法和技术要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends

用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第3部分:轻型(L系列)螺柱端头的尺寸、设计、试验方法和技术要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends

液压传动.25MPa和40MPa(250 bar和400 bar)压力下使用的四螺栓整体方法兰

Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)

航空航天.流体系统用螺纹密封接头.尺寸

Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions

液体动力和通用金属导管接头.第6部分:有或无O形密封圈的60°锥形接头

Metallic tube connections for fluid power and general use - Part 6: 60° cone connectors with or without O-ring

浮动油封

Floating seal

O型密封圈.第1部分:O型密封圈

O-rings -- Part 1: O-rings

O型密封圈.第2部分:外壳尺寸规格

O-Rings -- Part 2: Housing dimensions and sizes

O型密封圈.第3部分:质量验收标准

O-rings -- Part 3: Quality acceptance criteria

O形密封圈装配槽.设计标准

O-rings housings -- Design criteria

O形环.质量验收标准

O-rings -- Quality acceptance criteria

航空系列 带螺纹且带锁紧环的适配用 O 形圈 调查

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey

航空航天系列 氟橡胶（FKM）O型圈 低压缩变形 硬度80 IRHD

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

航空航天系列 氟橡胶（FKM）O 形圈 低压缩永久变形 技术规范

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

航空航天系列 法兰式直通流体接头 0.8毫米壁厚管子采用O形圈密封

Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes

航空航天系列 氟硅橡胶 (FVMQ) O 形圈 硬度 80 IRHD

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

航空航天系列 氟硅橡胶 (FVMQ) O 形圈 技术规范

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification

航空系列 静态密封元件 O 形圈 乙烯丙烯 模制 耐磷酸酯 (-55 °C 至 107 °C) 英制系列

Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series

航空航天系列 直螺纹管接头凸头用静态密封元件O形圈 乙烯 丙烯材质 模制 耐磷酸酯 (-55°C至107°C) 英寸系列

Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series

测试套件 TORPEDO MARK 475 MOD 0（用于 TORPEDO MK 46 MOD 0）

TEST SET TORPEDO MARK 475 MOD 0 (FOR TORPEDO MK 46 MOD 0)

航天系列 压缩后残留变形小的氟橡胶（FKM）O型密封圈 硬度 80 DIDC

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

航空航天系列 氟橡胶 (FKM) O 型圈 低压缩永久变形 技术规格

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

铁路车辆.O形密封圈的选择.标识、尺寸和公差

Railway rolling stock. Selection of O rings. Designation, dimensions and tolerances.

用于流体动力和一般用途的连接器 带可调节螺柱端部和 O 形圈密封的连接器的装配说明

Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing

用于流体动力和一般用途的连接器 带可调节螺柱端部和 O 形圈密封的连接器的装配说明

Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing

型圈失效模式

Patterns of O-Ring Failures

形圈，预成型，直螺纹管接头凸台，I 型液压（-65 至 160°F）

O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F)

橡胶、氟硅橡胶、耐油和耐燃料、片材、带材、模制件和挤压成型件

Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes

橡胶：Butyl（IIR 缩写）Phosphate Ester Resistant 65 to 75 Hardness for Seals in Hydraulic Systems etc.

Rubber: Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness for Seals in Hydraulic Systems@ etc.

橡胶：乙烯丙烯（EP）磷酸酯，耐低温 Tg -67°F（-55°C），75 至 85 M 型硬度，用于液压系统中的密封件

Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems

无防挤出装置的静态径向O型密封圈在发动机和发动机控制系统中的密封结构设计准则和尺寸

Gland Design Criteria and Dimensions for Static Radial O-Ring Seal Applications Without Anti-Extrusion Devices Specifically for Engine and Engine Control Systems

用于发动机和发动机控制系统的不带防挤压装置的静态轴向 O 型圈密封应用

Static Axial O-Ring Seal Applications Without Anti-Extrusion Devices for Engine and Engine Control Systems

用于发动机和发动机控制系统中无防挤出装置的静轴向O型圈密封应用

Static Axial O-Ring Seal Applications Without Anti-Extrusion Devices for Engine and Engine Control Systems

密封压盖的设计以及密封挤压和密封压盖体积的计算

Gland Design, Computation of Seal Squeeze and Gland Volume

主体，耦合，刚性，固定腔，螺纹，套圈式管端，II 型

BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II

O 形圈，由 AMS-P-5510 橡胶模制而成的直螺纹管接头凸台

O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER

由 AMS-R-7362 丁腈橡胶材料模制而成的 O 型圈

O-RING MOLDED FROM AMS-R-7362 NITRILE RUBBER MATERIAL

由 AMS7272 丁二烯-丙烯腈橡胶（NBR）模制而成的 O 型圈

O-Ring Molded from AMS7272 Butadiene-Acrylonitrile Rubber (NBR)

由 AMS7274 材料模制而成的 O 形圈

O-Ring Molded from AMS7274 Material

由AMS7274材料模压成型的O形圈

O-Ring Molded from AMS7274 Material

航天杆刮板压盖设计标准

Aerospace Rod Scraper Gland Design Standard

适配器 8000 psi 系统的端口连接、环形锁定设计、安装和拆卸

Adapter - Port Connection, Ring Locked Design, Installation and Removal of 8000 psi Systems

密封圈设计 O形圈和其他弹性密封件

Gland Design, O-Ring and Other Elastomeric Seals

压盖设计、O 型圈和其他密封件

Gland Design, O-Ring and Other Seals

压盖设计：压缩型密封件的标称横截面为 3/8 英寸

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals

形圈的航空航天尺寸标准

Aerospace Size Standard for O-Rings

由 AMS7268（硅胶）材料模制而成的 O 型圈

O-RING MOLDED FROM AMS7268 (SILICONE) MATERIAL

AMS7379(碳氟化物)材料模塑O型环

O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL

超大尺寸O形圈航空航天尺寸标准

Aerospace Size Standard for Oversize O-Rings

形圈，由 AMS7379 橡胶模制而成，用于 AS5202 端口

O-RING, MOLDED FROM AMS7379 RUBBER FOR USE WITH AS5202 PORTS

用于航空航天液压和气动应用的面密封压盖设计、静态、O 型圈和其他密封件

Face Seal Gland Design, Static, O-Ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications

动态密封测试夹具

Dynamic Seal Test Fixture

采用 AMS7410 氟碳 (FKM) 材料模制而成的 O 形圈

O-RINGS MOLDED FROM AMS7410 FLUOROCARBON (FKM) MATERIAL

由 AMS7601 丁基橡胶模制而成的 O 型圈

O-Ring Molded from AMS7601 Butyl Rubber

由 AMS7276 材料模制而成的 O 形圈

O-ring Molded from AMS7276 Material

由 AMS7259 材料模制而成的 O 型圈

O-RING MOLDED FROM AMS7259 MATERIAL

M83461 由 AMS-P-83461 橡胶模制而成的 O 型圈

M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER

直螺纹管接头凸台 O 形圈由 AMS-P-83461 丙烯腈丁二烯（NBR）橡胶模制而成

STRAIGHT THREAD TUBE FITTING BOSS O-RING MOLDED FROM AMS-P-83461 ACRLONITRILE BUTADIENE (NBR) RUBBER

预成型密封圈（O形圈）制造和检验标准

Manufacturing and Inspection Standards for Preformed Packings (O-Rings)

聚四氟乙烯(PTFE)树脂的液压和气动固定器(支承环）

Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin

由 AMS7267 硅（VMQ）橡胶模制而成的 O 型圈

O-Ring Molded from AMS7267 Silicone (VMQ) Rubber

由 AMS3650 材料加工而成的 O 型圈

O-Ring Machined from AMS3650 Material

由AMS3650材料加工的O形环

O-Ring Machined from AMS3650 Material

由 AMS3617 材料加工而成的 O 型圈

O-Ring Machined from AMS3617 Material

从AMS3617材料机械加工的O形圈

O-Ring Machined from AMS3617 Material

由 AMS3668 材料加工而成的 O 型圈

O-Ring Machined from AMS3668 Material

由 AMS7273 氟硅橡胶（FVMQ）橡胶材料模制而成的 O 形圈

O-Ring Molded from AMS7273 Fluorosilicone (FVMQ) Rubber Material

一般用途和流体动力连接 带 ASME B1.1 螺纹和 O 形圈密封的端口和螺柱端 第3部分：轻型（L 系列）螺柱端

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L-Series) Stud Ends

填料，预成型 O 形密封圈标准尺寸和尺寸代码，公制

Packing, Preformed - O-Ring Seal Standard Sizes and Size Codes, Metric

耦合燃料，灵活可变腔，带套圈的螺纹型，公制

Coupling Fuel, Flexible Variable Cavity, Threaded Type with Ferrules, Metric

由 AMS7276 材料模制而成的 O 型圈，公制

O-Ring Molded from AMS7276 Material, Metric

预封装.米制AMS 7273的O形密封圈

Packing, Preformed - O-Ring Seal, AMS 7273, Metric

密封元件 密封圈 尺寸

Sealing elements - O-rings - Dimensions

密封元件 O形圈 通用应用的安装尺寸

Sealing elements — O-rings - Housing dimensions for general applications

航空航天系列 密封圈, 在氟滑 Silicone 橡胶 (FVMQ) 中 肯氏硬度 80 IRHD

Aerospace series - Orings, in fluoroslilicone rubber (FVMQ) - Hardness 80 IRHD

航空航天系列 O型密封圈 在氟硅橡胶（FVMQ）中 技术规范

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification

通用和流体动力连接件 具有ISO 228-1螺纹的橡胶密封或金属对金属密封的接口和螺塞端部 第3部分：轻型（L系列）螺塞端部通过O形圈密封并配有保持环（类型G和H）（ISO 1179-3:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)

通用和流体动力连接 带有弹性或金属对金属密封的 ISO 228-1 螺纹的端口和螺柱端 第3部分：轻型（L 系列）螺柱端 采用 O 形圈和挡圈密封（G 型和 H 型）（ISO 1179-3:2007 IDT）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007, IDT)

液压流体动力和通用连接 软管接头 第2部分：带有ISO 8434-1 24°圆锥连接端和O型圈的软管接头（等同采用ISO 12151-2:2022）

Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings (12151-2:2022, IDT)

气态氢 加气站 第7部分：橡胶O型圈（ISO 19880-7:2025 IDT）

Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings (ISO 19880-7:2025, IDT)

液压系统 密封环 第1部分：内径、横截面、公差和标记代码（ISO 3601-1:2008 等同采用）

Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2008, IDT)

液压系统 密封圈 第2部分：通用应用的壳体尺寸（等同采用ISO 3601-2:2016）

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2016, IDT)

流体动力系统 O型密封圈 第3部分：质量验收准则（ISO 3601-3:2005 IDT）

Fluid power systems - O-rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005, IDT)

液压系统 密封圈 第4部分：防挤出环（备用环）（ISO 3601-4:2008 等同采用）

Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008, IDT)

液压流体动力和通用连接 具有ISO 261公制螺纹和O形圈密封的端口和螺杆末端 第2部分：重载（S系列）螺杆末端的尺寸、设计、试验方法和要求（ISO 6149-2:2006 等同采用）

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006, IDT)

钢球投送器

Steel ball deliver

矿用液压支架U形销式快速接头及其附件

Quick adapter with U pin and accessories for mine hydraulic support

航空航天系列 氟橡胶（FKM）O型圈 低压缩变形 硬度80 IRHD（2026年2月由西班牙标准化协会批准 ）

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD (Endorsed by Asociación Espa?ola de Normalización in February of 2026.)

航天系列 氟碳橡胶（FKM）O型圈 低压缩变形 技术规格（2026年2月由西班牙标准化协会批准）

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification (Endorsed by Asociación Espa?ola de Normalización in February of 2026.)

航天系列 扭环形密封圈（O型圈） 由氟碳橡胶（FKM）制成 压缩后永久变形轻微 硬度 80 IRHD

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

航天系列 扭环形（O型圈）密封件 采用氟碳橡胶（FKM）材质 压缩后具有轻微的永久变形 技术规范

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

液压流体动力和一般用途的连接 软管接头 第2部分：带 O 形圈的 ISO 8434-1 24° 锥形连接端的软管接头

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings