美利体育登录入口官网

Fitness-For-Service 示例问题手册（第一版）

Fitness-For-Service Example Problem Manual (First Edition)

压力容器脆性断裂的预防

Prevention of Brittle Fracture of Pressure Vessels

合乎使用实例问题手册

Fitness-For-Service Example Problem Manual

高级陶瓷断裂分析和裂纹源表征标准实践

Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

用于测量聚乙烯管和树脂的缓慢裂纹扩展抗性的缺口拉伸试验的标准试验方法

Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

大型转子锻件的脆性失效分析

Brittle Failure Analysis of Large Rotor Forgings

制冷系统和热泵用压力美利体育官网首页网址.容器.一般要求

Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements

欧洲规范3：钢结构设计 材料韧性及厚度方向性能

Eurocode 3: Design of steel structures - Material toughness and through-thickness properties

低温汽化系统 防止美利体育官网首页网址和管道脆性断裂

Cryogenic vaporization systems - prevention of brittle fracture of equipment and piping

高压钢瓶服役性能

Service performance of high pressure cylinders

欧洲规范 3：钢结构设计 第1-10部分：材料韧性和厚度特性

Eurocode 3: Design of steel structures – Part 1-10: Material toughness and through-thickness properties

石油和天然气工业-北极作业-北极作业的材料要求

Petroleum and natural gas industries - Arctic operations - Material requirements for arctic operations (ISO/TS 35105:2018); English version CEN ISO/TS 35105:2019

聚合物绝缘子芯材脆性断裂生产、试验和诊断指南

Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

防水软板.屋顶密封沥青板.低温挠性测定.德文版本EN 1109-2013

Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature; German version EN 1109:2013

热塑性塑料半成品焊接接头试验第3部分：拉伸蠕变试验（草案）

Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test

热塑性塑料半成品焊接接头试验第3部分：拉伸蠕变试验

Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014

未锻造压力容器 部分 2：材料

Unforged Pressure Vessels Part 2: Materials

不发热压力容器 第2部分:材料

Non-heating pressure vessels Part 2: Materials

金属工业管道 第2部分：材料；德文版 EN 13480-2:2017/A1:2018

Metallic industrial piping - Part 2: Materials; German version EN 13480-2:2017/A1:2018

金属工业管道 第2部分：材料

Metallic industrial piping - Part 2: Materials

沥青和沥青粘合剂 用拉伸试验法测定沥青粘合剂的抗拉特性（草案）

Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method

制冷系统和热泵用压力美利体育官网首页网址 第1部分：压力容器 一般要求（草案）

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

欧洲规范 3：钢结构设计 第1-10部分：材料韧性和厚度特性 草案

Draft Document - Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties; German and English version prEN 1993-1-10:2023

欧洲规范3：钢结构设计 第1-10部分：材料韧性和贯穿厚度特性（草案）

Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties

热塑性塑料板材和管材的焊接接头的时间拉伸-拉力试验

Time-stretch-tensile test on welded joints of thermoplastic sheet and pipe materials - Test methods

RBMK-1000 的金属结构 核电厂机组退役期间的强度计算

Metal structures of RBMK-1000. Strength calculation during decommissioning of a nuclear power plant unit

聚合物绝缘子关于核心材料脆性断裂的生产 测试和诊断指南（1.0 版）

Guidance for production@ testing and diagnostics of polymer insulators with respect to brittle fracture of core materials (Edition 1.0)

塑料管材和管件 聚乙烯（PE）鞍形熔接接头的脱粘试验 通过撕裂试验评估熔接接头界面的延展性

Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test

管和管件用聚乙烯材料耐慢速裂纹伸展的测定的缺口拉伸试验

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)

石油和天然气工业 北极条件下运行 北极条件下使用材料的要求（ISO/TS 35105:2018）

Petroleum and natural gas industries - Arctic operations - Material requirements for arctic operations (ISO/TS 35105:2018)

热塑性半成品焊接接头的试验 第3部分：拉伸蠕变试验

Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

沥青及沥青结合料 通过拉伸试验方法测定沥青结合料的拉伸性能

Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method

欧标 3. 钢结构设计 第1-10部分 材料的延性和沿厚度的特性（自 2027 年 9 月 30 日起将应用于设计）

Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties

地下天然气集输管线在氢充电条件和湿CO₂/H₂S腐蚀下ERW焊缝缺陷导致的脆性断裂分析

Analysis of brittle fracture caused by ERW weld defects in underground natural gas gathering and transmission pipelines under hydrogen charging conditions and wet CO2/H2S corrosion

CAT 797F矿用卡车车架裂纹有限元分析（FEA）

CAT 797F Mining Truck Frame Crack Finite Element Analysis (FEA)

碳钢韧性影响因素分析

Analysis of factors affecting toughness of carbon steel

钢结构标准

Steel Structures Standard

钢结构标准第1部分：材料、制造和施工

Steel structures Standard Part 1: Materials, fabrication, and construction

石油和天然气工业 北极行动 北极行动的材料要求

Petroleum and natural gas industries. Arctic operations. Material requirements for arctic operations

非受火压力容器.第9部分:EN 13445系列和ISO 16528的一致性

Unfired pressure vessels - Part 9: Conformance of the EN 13445 series to ISO 16528

光伏组件所用材料的测量程序 封装剂 光学耐久性测试程序

Measurement procedures for materials used in photovoltaic modules. Encapsulants. Test procedure of optical durability

欧洲规范 3 钢结构设计 第1-10部分：材料韧性和厚度特性

Eurocode 3 — Design of steel structures — Part 1-10: Material toughness and through-thickness properties

notch拉伸试验以测量聚乙烯材料管材和配件产品（PENT）的缓慢裂纹生长抗力（ISO 16241:2005 等同采用）

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) (ISO 16241:2005, IDT)

未燃烧压力容器 第9部分：EN 13445 系列与 ISO 16528 的一致性

Unfired pressure vessels - Part 9: Conformance of the EN 13445 series to ISO 16528 (Endorsed by Asociación Espa?ola de Normalización in September of 2019.)

聚合物绝缘子芯材脆性断裂的生产、测试和诊断指南

Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

欧洲规范3 钢结构设计 第1-10部分：材料的韧性及厚度方向的性能

Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties

关于脆性断裂和疲劳裂纹扩展的熔焊接头缺陷评估方法

Method of Assessment for Flaws in Fusion Welded Joints with Respect to Brittle Fracture and Fatigue Crack Growth

第 VIII 部分设计裕度的评估 ASME 锅炉和压力容器规范：第 1 部分和第 2 部分第2部分

Evaluation of Design Margins for Section VIII, Div. 1 and 2 of the ASME Boiler and Pressure Vessel Code: Part 1 & Part 2