美利体育登录入口官网

岩土工程勘探钻孔退役的标准实施规程

Standard Practice for Decommissioning Geotechnical Exploratory Boreholes

铸铁滑动门

Cast-Iron Slide Gates

装配式不锈钢滑动门

Fabricated Stainless- Steel Slide Gates

装配式铝滑动门

Fabricated Aluminum Slide Gates

阀门检验和测试

Valve Inspection and Testing

表面土埋结构

Above ground burial structures

水厂用蝶阀 第2部分：双法兰

Butterfly valves for waterworks purposes, Part 2: Double flanged

一般用途用管螺纹 (英制)

Pipe Threads@ General Purpose (Inch)

镶嵌玻璃用预制密封条的标准规格

Standard Specification for Preformed Tape Sealants for Glazing Applications

将密封或密封剂行为与参考照片进行比较的标准指南

Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs

将密封或密封剂行为与参考照片进行比较的标准指南

Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs

与粘土产品相关的标准术语

Standard Terminology Relating to Clay Products

土工膜与贯穿件或结构机械连接的标准指南

Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

用于电子器件的玻璃 - 金属接头的评估标准规范和测试方法

Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices

成人首饰的消费者安全标准规范

Standard Consumer Safety Specifications for Adult Jewelry

通过染料渗透美利体育登录入口官网无孔包装或柔性阻隔材料泄漏的标准测试方法

Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration

F1140-无约束包装件内部加压失效抵抗力的标准测试方法

F1140-Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

阀门安装使用指南

Guide to Installation and use of valves

法兰及其接件 与有垫圈圆形法兰连接件的设计规则有关的垫圈参数和试验方法

Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

道路车辆. 行车纪录仪的机械密封安全. 要求和试验规程

Road vehicles. Security of the mechanical seals used on tachographs. Requirements and test procedures

船舶和海洋技术 用于低温应用的球阀 设计和测试要求

Ships and marine technology. Ball valves for use in low temperature applications. Design and testing requirements

玉米秸秆黄贮技术规程

Technical regulations for corn stalk yellow storage

葡萄超高压制汁加工技术规范

Technical Specifications for Processing of Grape Ultra High Pressure Juice

泡沫塑料制浸渍密封带用于外壁接缝时的密封性 浸渍密封带 要求和检验

Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing

包装 测定软包装材料密封件的密封接缝强度

Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material

法兰及其连接件 带垫圈的圆形法兰连接件用与设计规则有关的垫圈参数和试验规程（草案）

Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

道路车辆 行车纪录仪的机械密封安全 要求和试验规程（草案）

Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures

石油、石化和天然气工业 轴流式和离心式压缩机和膨胀压缩机 第1部分：一般要求（ISO 10439-1:2015） 英文版 EN ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015); English version EN ISO 10439-1:2015, only on CD-ROM

包装为终端灭菌的医疗美利体育官网首页网址 第1部分：材料、无菌屏障系统和包装系统的规范

Medical devices packaged for terminal sterilization - Part 1: Specifications for materials, sterile barrier systems and packaging systems

热喷涂 热喷涂涂层的后处理和精加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005

铝及其合金的阳极氧化 密封后阳极氧化涂层吸收能力损失的估计 预先酸处理的染斑试验（ISO 2143:2017）

Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

航空航天系列 O 形圈凹槽 O 形圈凹槽的设计标准 基本计算（AECMA 技术报告 TR 4271:2000）

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

航空航天系列.用于杆端的自测球状轴承.技术规范

Aerospace series - Rod ends with self-aligning ball bearings - Technical specification

最终灭菌医疗器械包装 第2部分：成型、密封和装配过程的确认的要求

Packaging for terminally sterilized medical devices Part 2: Requirements for validation of forming, sealing and assembly processes

半导体器件 机械和气候试验方法 第8部分：密封

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 8: Sealing

带配菜的鱼罐头.技术条件

Canned garnished fish with vegetables. Specifications

农业和林业用拖拉机和自推进式机器.操作员周边环境.第5部分:加压系统测试方法

Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Part 5. Pressurization system test method

航空产品电装工艺 电子组、部件的密封和灌封

Sealing and potting of electronic components and components of aviation products Denso process

电子美利体育官网首页网址用连接器.试验和测量.第14-2部分:密封试验.细微的漏气

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

电气继电器—试验与测量 第49部分：长期密封稳定性的试验

Electrical relays - Tests and measurements - Part 49: Long term stability of sealing

自动搬运部件的包装.第3-4部分:自动装料给料机用连续压花带上表面安装部件的包装

Packaging of components for automatic handling - Part 3-4: Packaging of surface mount components on continuous embossed tapes for Auto Loading Feeder

核电站电气美利体育官网首页网址水灾防护推荐规程

Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards

核电站电气美利体育官网首页网址水灾防护推荐规程

Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards

通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1标准螺纹的孔口和螺柱端.第1部分:带螺纹的孔口

Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing.Part 1: Threaded ports

航空航天 飞机结构用轻负荷单列刚性密封球轴承 英制系列

Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series

航空航天 飞机结构用中等负荷密封精密单列刚性球轴承 英制系列

Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series

航空航天 飞机结构用重负荷密封双列刚性球轴承 英制系列

Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series

航空航天液体系统.弹性体密封件.存储和保存期

Aerospace fluid systems - Elastomer seals - Storage and shelf life

肥料和土壤调理剂 最终样品 实践方案

Fertilizers and soil conditioners; Final samples; Practical arrangements

环境试验方法－电气与电子－ 第2-17部分：密封（气密性）试验方法（试验代号：Q）

Environmental testing-Part 2-17: Tests-Test Q: Sealing

包装用压敏纸黏胶带

Pressure sensitive adhesive cloth tapes for packaging

包装用聚氯乙烯压敏胶带

Pressure sensitive adhesive polyvinyl chloride tapes for packaging

压力紧密配合的管螺纹 第3部分：使用量规验证

Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges

航空航天系列 继电器和接触器的要求与测试程序 第412部分：密封

Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal

航空航天系列 圆形和矩形电及光学连接器用电缆出口配件 第009部分: 热缩靴用直型密封式J型电缆出口 产品标准

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard

耐油密封润滑脂

Grease for oil resistant and sealing

核电厂电气美利体育官网首页网址水：Ψ阑な涤梅椒

Recommended practice for the protection of electric equipment in nuclear power plants from water hazards

垂直线式离心泵工艺行业实践补充

Application of ASME B73.2 - 2003-R2008 Specification for Vertical In-Line Centrifugal Pumps for Chemical Process

螺纹紧固件预涂粘附层技术条件 第3部分 密封涂层

Technical conditions for pre-coated adhesive coatings on threaded fasteners Part 3 Sealing coatings

型圈失效模式

Patterns of O-Ring Failures

航空轮应用件用单列圆锥滚子轴承的选择,试验,润滑和密封

Selection, Testing, Lubrication, and Sealing of Single Row Tapered Roller Bearings for Aerospace Wheel Applications

在役部件的外部液压泄漏

External Hydraulic Leakage for In-Service Components

单孔安装、圆柱形、电气连接器的安装和安装程序（用于压差应用）

Procedure for Installation and Mounting of Single Hole Mount, Cylindrical, Electrical Connectors (For Pressure Differential Applications)

密封件，I 型和 II 型标准型和低型

SEAL, TYPE I AND II STANDARD AND LOW PROFILE

密封件 I 型和 II 型标准和薄型

SEAL, TYPE I AND II STANDARD AND LOW PROFILE

联轴器组件，V 型固定器，高压高温，气动管

Coupling Assembly, V-Retainer, High Pressure High Temperature, Pneumatic Tube

接头组件 V 型保持器 高压高温 气动管

Coupling Assembly, V-Retainer, High Pressure High Temperature, Pneumatic Tube

轴承，球头，杆端关节轴承，双列，精密，实心轴，自对准，机身，I 型，-65 至 300°F

BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, SOLID SHANK, SELF-ALIGNING, AIRFRAME, TYPE I, -65 TO 300 °F

英制耐磨X型密封的带有轴承滚子和滚针滚轮的轴承

BEARING, ROLLER, NEEDLE, TRACK ROLLER, SEALED, TYPE X, ANTIFRICTION, INCH

由 AMS7274 材料模制而成的 O 形圈

O-Ring Molded from AMS7274 Material

由AMS7274材料模压成型的O形圈

O-Ring Molded from AMS7274 Material

飞机机架抗摩擦滚珠轴承的一般标准

(R) Bearings, Ball, Airframe, Antifriction, General Standard for

包装 预制 AMS7273 密封

PACKING, PREFORMED - AMS7273, SEAL

液压缸泄漏测试

Hydraulic Cylinder Leakage Test@ Recommended Practice

重型电连接器的性能标准

Heavy-Duty Electrical Connector Performance Standard

车轮端组件和轴主轴接口尺寸 - 卡车和公共汽车

Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus

JRW-130M型有可靠性指标的微型密封直流电磁继电器详细规范

Detail specification for model JRW-130M microminiature d.c.hermetically sealed electromagnetic relays established reliability

JRC-200M型有可靠性指标的超小型(15.5×8.2×8.2) 密封直流电磁继电器详细规范

Detail specification for model JRC-200M subminiature (15.5×8.2×8.2)d.c.hermetically sealed electromagnetic relays established reliability

JGX-0602M型密封直流固体继电器.详细规范

Relays,d.c.solid state,hermetically sealed,model JGX-0602M,detail specification for

JGC-1MA型密封直流固体继电器.详细规范

Relays,d.c.solid state,hermetically sealed,model JGC-1MA,detail specification for

KBM1型密封电磁断路器详细规范

Type KBM1,circuit breakers,electromagnetic,sealed,detail specification for

道路车辆 速度记录仪上使用的机械密封的安全性 要求和试验程序

Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures

玻璃包装 冠盖 直径26毫米 高度6毫米冠盖

Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap

通用和流体动力连接件 具有ISO 261弹性密封或金属对金属密封的螺纹端口和螺柱端 第4部分：外部六角和内部六角端口塞子的尺寸、设计、试验方法和要求（ISO 9974-4:2016,...

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 9974-4:2016,...

液体硅橡胶 双组分室温硫化

Liquid silicone rubber— Two components cured at ambient

石油、石化、天然气及相关工业用蝶阀

Butterfly valves for petroleum, petrochemical, natural gas and related industries

UL柴油燃料，生物柴油，生物柴油与标称浓度高达20%的柴油/生物柴油混合燃料(B20),煤油,燃料油用软管喷嘴阀安全标准(第一版)

UL Standard for Safety Hose Nozzle Valves for Diesel Fuel@ Biodiesel Fuel@ Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20)@ Kerosene@ and Fuel Oil (First Edition; Reprint with revisions through and including June 29@ 2

法兰及其接头 与垫片圆形法兰连接设计规则相关的垫片参数和测试程序

Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

射频连接器 第14部分：外导体内径 12mm 带螺钉耦合的射频同轴连接器 特性阻抗 75 欧姆（3.5/12 型）

Radio-frequency connectors -- Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3.5/12) (Endorsed by AENOR in April of 2011.)