美利体育登录入口官网

夹具或箍缩阀用一般要求

General Requirements for Clamp or Pinch Valves

传输天然气、石油气、危险液体、高挥发性液体和二氧化碳钢管线的压力测试

Recommended Practice for the Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide

传输天然气、石油气、危险液体、高挥发性液体和二氧化碳钢管线的压力测试

Recommended Practice for the Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide

阀门检验和测试

Valve Inspection and Testing

储液罐系统（冷藏液化气体存储）

Liquid tank systems (refrigerated liquefied gas storage)

低温液化气储存罐系统.第1版

Tank Systems for Refrigerated Liquefied Gas Storage (FIRST EDITION; Incorporate Addendum 1: July 2013 and Addendum 2: November 2014)

冷藏液化气体储罐系统

Tank Systems for Refrigerated Liquefied Gas Storage

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Fire detection, warning, control and intercom systems - Methods of test - Frangibility test

管道 气体和液体石油 第 5 部分：现场压力测试

Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing

气体分配用大型金属阀.手工操作 NPS 2 1/2(DN 65)～NPS 12(DN 300),最大125 psig(8.6 bar)

Large Metallic Valves for Gas Distribution Manually Operated@ NPS 2 1/2 (DN 65) to NPS 12 (DN 300)@ 125 psig (8.6 bar) Maximum

用于气体分配的大型金属阀门

Large Metallic Valves for Gas Distribution

电绝缘管件性能要求

Performance requirements for electrical insulating fittings

中高温用锻碳钢和合金钢管道配件标准规范

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

UNS NO8367焊接管标准规格

Standard Specification for UNS N08367 Welded Pipe

陶土管道低压空气试验的标准试验方法

Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines

螺纹聚氯乙烯（PVC）塑料管件标准规范 表80

Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

橡胶内衬消防软管规范

Specification for Rubber Lined Fire Hose

水压泄漏试验的标准实施规程

Standard Practice for Hydrostatic Leak Testing

纤维增强塑料树脂（FRP）储罐/容器声发射美利体育登录入口官网的标准做法

Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

已安装波纹高密度聚乙烯和聚丙烯管道的渗透和渗出验收试验的标准实施规程

Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines

D1785 - 聚氯乙烯 (PVC) 塑料管材标准规范，附表 40、80 和 120

D1785-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

F0877-交联聚乙烯 (PEX) 热水和冷水分配系统的标准规范

F0877-Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

石油天然气工业 管道运输系统 管道完整性评估规范

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification

阀门测试 - 第1部分：生产压力测试要求规范

Testing of valves — Part 1 : Specification for production pressure testing requirements

低温容器.大型可运输的非真空绝缘容器.操作要求

Cryogenic vessels - Large transportable non-vacuum insulated vessels - Operational requirements

防饮用水回流污染的装置.软管接头防回流装置DN 15～DN 32.A型H系列

Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A

塑料管道系统 聚乙烯（PE）管道系统阀门 操作机构弯曲时和弯曲后的密封性试验方法

Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms

可移动气瓶 全包裹碳复合材料氢气瓶和管

Transportable gas cylinders. Fully wrapped carbon composite cylinders and tubes for hydrogen

可运输储气瓶.焊接炭素钢储气瓶的周期性检验和测试

Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders

航空航天系列.最高达2100kPa的球形37°管联接器.英制.技术规范

Aerospace series. Pipe coupling 37, spherical up to 21 000 kPa. Inch series. Technical specification

气瓶 不可再充装的金属气瓶 规格及测试方法

Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods

用于热水和冷水装置的塑料管道系统 氯化聚氯乙烯 (PVC-C) 管道

Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) - Pipes

电阻焊接.焊接的破坏性检验.电阻滚焊的压力试验

Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds

气瓶 可重复充注的无缝铝合金气瓶 设计、结构和试验

Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing

工业阀门 金属阀门的压力测试

Industrial valves. Pressure testing of metallic valves

光学和光子学.环境试验方法.高内压、低内压和浸没

Optics and photonics. Environmental test methods. High internal pressure, low internal pressure, immersion

石油天然气工业 管道运输系统 管道完整性评估规范

Petroleum and natural gas industry – Pipeline transportation systems – Pipeline integrity assessment specification

金属材料测试 室温压缩试验

Metal material testing Room temperature compression test

管接头. 第1部分: 连接管和配件用管接头的技术交货条件

Pipe couplings - Part 1: Technical delivery conditions for pipe couplings intended for connecting pipes and fittings

天然气基础设施 压力试验, 调试和停运程序 功能要求

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements

天然气基础设施. 压力试验, 调试和停运程序. 功能要求; 德文版本EN 12327-2012

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements; German version EN 12327:2012

天然气基础设施 压力测试、调试和退役程序 功能要求

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements; German version EN 12327:2012

压力下流体用热塑性管道系统的粘合剂 规范（草案）

Adhesives for thermoplastic piping systems for fluids under pressure - Specifications

液化石油气美利体育官网首页网址和配件 管道系统和支架 液相和蒸汽压力相的液化石油气（草案）

LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

塑料管路系统 聚乙烯（PE）管路系统用阀门 对操作机构施加和施加后弯曲条件下的密封性测试方法 德语版本 EN 1680:2025

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German version EN 1680:2025

光纤互连装置和无源元件 基本测试和测量程序 第2-38部分：测试 加压光纤闭合装置的密封

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006 / Note: DIN EN 61300-2-38 (199...

光纤互连装置和无源元件 可靠性 第9-1部分：无源光学元件的资格

Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components (IEC 62005-9-1:2015); German version EN 62005-9-1:2015

建筑物内的饮用水输送系统 第4部分：安装

Specifications for installations inside buildings conveying water for human consumption — Part 4: Installation;

建筑物内部饮用水输送美利体育官网首页网址规范.第4部分:装置.德文版本EN 806-4-2010

Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation; German version EN 806-4:2010

建筑物内输送人类用水的装置规范 第4部分：安装

Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation; German version EN 806-4:2010

气瓶 阀门 规格和试验目录

Gas Cylinder Valve Specifications and Test Catalog

气瓶 焊接铝合金、碳钢和不锈钢气瓶 定期检查和测试

Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing (ISO 10460:2018); German version EN ISO 10460:2018

工业阀门 阀门设计验证试验

Industrial valves – Design validation-testing of valves (ISO 23632:2021)

建筑应用隔热产品 压缩行为的测定

Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022); German version EN ISO 29469:2022

纺织品 纤维织物和服装的干洗,湿洗和专业护理 第1部分：清洗和修整后的性能评定（草案）

Dry cleaning, wet cleaning and professional care of textile fibers and clothing - Part 1: Evaluation of performance after cleaning and finishing (draft)

光学和光子学.环境试验方法.第8部分:高压、低压及浸渍(ISO 9022-8-2015)

Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion (ISO 9022-8:2015)

对面临网络物理威胁的关键基础设施的弹性进行压力测试；英文文本

Stress-testing resilience of critical infrastructures exposed to cyber-physical threats; Text in English

航空航天系列.液体或气体条件下管道的设计和结构.设施的刚性管线

Aerospace series - Design and construction of pipeline for fluids in liquid or Gaseous condition - Rigid lines, installation (AECMA Technical Report TR 2674:1997)

钢制管材天然气管道16巴工作压力 安装

Steel pipe natural gas pipeline 16 bar working pressure installation

燃气管道施工

Gas pipework made of steel pipes for an operating pressure up to and including 16 bar

操作压力至16巴钢制燃气管道；安装

Gas Pipework made of Steel Pipes for an Operating Pressure up to and including 16 bar

打印试验方法 天然气输送/气体分配

Print test methods Natural gas transmission/gas distribution

燃气用聚乙烯管材和管件 制造与验收

Polyethylene pipes and fittings for gas applications - Manufacturing and acceptance

燃气管道至10bar的操作压力采用聚乙烯(PE 80, PE 100和PE-Xa) - 建设

Polyethylene gas pipelines with an operating pressure up to and including 10 bar (PE 80, PE 100 und PE-Xa) — Construction

气压调节装置对入口压力在100巴及以下的要求

Gas Pressure Regulating Stations for Inlet Pressures up to and including 100 bar

德国燃气和水工业联合会供水系统技术规则 第2部分：建设和测试

Technical Rules for Water Supply Systems - Part 2: Construction and Testing

水分配系统技术规则 第2部分：建筑与检验

Technical Rules for Water Distribution Systems (TRWV), Part 2: Construction and Testing

美利体育官网首页网址的压力试验指南

Guide to pressure testing of equipment

埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法

Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints

石油和天然气工业 管道输送系统 管道安全评估标准

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification

国际管道和机械官员协会压水箱及非压水箱饮用水罐制造标准

International Association of Plumbing and Mechanical Officials Standard for the manufacture of pressurized and non-pressurized drinking water tanks

光纤电缆 第1-213部分：通用规范 基本光缆测试程序 环境试验方法 微管耐压 方法 F13

Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures - Environmental test methods - Microduct pressure withstand, method F13

电力和光纤电缆 非金属材料的试验方法 第508部分：机械试验 绝缘和护套的高温压力试验

Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths

工业阀门 压力试验

Industrial Valves. Pressure Test.

玻璃容器 内压强度测定

Glass containers. Determination of internal pressure resistance.

储气瓶.焊接的碳素钢储气瓶.定期检验和试验

Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing

道路车辆 - 液化天然气（Lng）燃油系统组件 - 第2部分:性能和一般测试方法

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods

电阻焊接.焊缝破坏性试验.电阻缝焊的压力试验

Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds

船舶和海上技术.充气救生美利体育官网首页网址的维修.第2部分:充气救生筏

Ships and marine technology - Servicing of inflatable life-saving appliances - Part 2: Inflatable life rafts

航空航天系列 - 用于35 MPa工作压力的钛管 - 第1部分:英制系列

Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series

石油天然气工业 管道运输系统 管道完整性评价规范

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification

卡车散装燃料输送用橡胶软管和软管组件.规范

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

内燃机全流式机油滤清器试验方法.第5部分:冷起动模拟和液压脉冲耐久性试验

Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 5: Test for cold start simulation and hydraulic pulse durability

水吸放用橡胶软管和软管总成. 规格

Rubber hoses and hose assemblies for water suction and discharge - Specification

工业阀门.金属阀门的压力试验

Industrial valves - Pressure testing of metallic valves

工业用短玻璃纤维增强聚乙烯 (PE-sGF) 管道系统 系统适用性

Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications - Fitness for purpose of the system

橡胶水管

Rubber Hoses for Water (Water Hoses)

Duj? tiekimo infrastruktūra 压力测试 投用接收和停止运营程序 功能要求

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements

塑料管道系统 聚乙烯（PE）管道系统阀门 弯曲及停止弯曲时关闭机制密封性测定方法

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms

工业阀门 金属阀门压力试验（等同ISO 5208:2015）

Industrial valves - Pressure testing of metallic valves (ISO 5208:2015, identical)

金属手动操作气体分配阀

Metal manually operated gas distribution valve

阀门压力试验

Pressure Testing of Valves Standard Practice

石油天然气工业 管道运输系统 管道完整性评估规范

Petroleum and natural gas industry - Pipeline transportation systems - Pipeline integrity assessment specification

石油天然气工业 管道运输系统 管道完整性评估规范

Petroleum and natural gas industry - Pipeline transportation systems - Pipeline integrity assessment specification

塑料管路系统 聚乙烯（PE）管路系统的阀门 对操作机构施加弯曲后及弯曲期间的密封性测试方法

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms

EN 3 便携式灭火器的说明文件

Interpretation document of EN 3 Portable fire extinguishers

健康信息学 医疗波形格式 压力测试心电图

Health informatics. Medical waveform format. Stress test electrocardiography

高压聚乙烯塑料管线系统压力测试规范

Specification for Pressure Testing HDPE Plastic Pipeline Systems

按照美国机械工程师协会B31.8标准进行金属管线压力试验

Pressure Testing of ASME B31.8 Metallic Piping

管道材料规范12PD0H01

Piping Material Specification 12PD0H01

压力测试，指定的气体介质压力

Pressure Testing, Gaseous Media Pressure as Specified

天然气基础设施 压力测试、启用和退役程序 功能要求

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements

塑料管路系统 聚乙烯（PE）管路系统用阀门 对操作机构施加和施加后弯曲条件下的密封性试验方法

Plastics piping systems — Valves for polyethylene (PE) piping systems — Test method for leaktightness under and after bending applied to the operating mechanisms

气瓶 焊接碳钢气瓶 周期性检验和试验 (ISO 10460:2005, IDT)

Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing (ISO 10460:2005, IDT)

电缆式地层测试器测井资料解释规范

The specification for the interpretation of wireline formation tester data

挠性金属软管

UL Standard for Safety Flexible Metallic Hose

屋顶组件抗风揭测试安全标准

Tests for Uplift Resistance of Roof Assemblies

天然气基础设施 压力测试、调试和退役程序 功能要求

Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements

LPG美利体育官网首页网址和配件 可移动可重复填充传统焊接和钎焊钢液化石油气（LPG）气瓶 周期性检验

LPG equipment and accessories Removable refillable Conventional welded and brazed steel liquefied petroleum gas (LPG) cylinders Periodic inspection

塑料管道系统 聚乙烯 (PE) 管道系统阀门 弯曲操作机构下及弯曲后密封性测试方法

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms

电阻焊 焊缝破坏性试验 电阻缝焊压力试验（ISO 17654:2011）

Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

一次性使用无菌尿道导管

Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2019-12)

塑料管路系统 聚乙烯（PE）管路系统的阀门 对驱动机构进行弯曲后及弯曲期间密封性能的试验方法

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms

50 Hz 50 kVA 至 2 500 kVA 的三相油浸式配电变压器 美利体育官网首页网址最高电压不超过 36 kV 第4部分：有关加压波纹油箱的要求和测试

Three-phase oil-immersed distribution transformers 50 Hz@ from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks; German version EN 50464-4:2007

电缆管理系统 - 第24部分：地下敷设的管道系统特殊规定

Conduit systems for Cable management - Part 24: Particular requirement for conduit systems buried underground