美利体育登录入口官网

测试 HVAC 空气管道的方法

Method of Testing HVAC Air Ducts

TP-02D 电连接器漏气测试程序

TP-02D Air Leakage Test Procedure for Electrical Connectors

石油营销终端逸散性排放因子和排放概况的发展第二卷：附录

Development of Fugitive Emission Factors and Emission Profiles for Petroleum Marketing Terminals Volume II: Appendices

止回阀防火试验用规范

Specification for Fire Test for Check Valves First Edition

带金属对金属阀座的安全泄压阀的商业阀座密封性（第一版）

COMMERCIAL SEAT TIGHTNESS OF SAFETY RELIEF VALVES WITH METAL-TO-METAL SEATS (FIRST EDITION)

阀门防火测试标准

Standard for Fire Test for Valves (ЧЕТВЕРТОЕ ИЗДАНИЕ; СПИСОК ОПЕЧАТОК 1:ИЮЛЬ 2018 г)

煤矿用自吸过滤式防尘口罩

Self-priming filter dust mask for coal mine

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Environmental testing - Tests - Test Q: Sealing

建筑材料、成分和结构的防火测试方法 烟控门和百叶窗装置 空气和介质温度渗漏试验程序

Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure

负（真空）气压下混凝土污水管的标准试验方法

Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure

用负压（真空）空气压力测定混凝土污水管的标准试验方法（米制）

Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)

橡胶软管测试方法

Rubber hose test methods

使用超声波检漏的标准操作规程

Standard Practice for Leaks Using Ultrasonics

在试样上规定的压差下测定通过外窗、幕墙和门的表面和侧面的气流的标准试验方法

Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

压力衰减泄露试验方法的标准实施规程

Standard Practice for Pressure Decay Leak Test Method

压力衰减泄漏试验方法的标准做法

Standard Practice for Pressure Decay Leak Test Method

基于泄漏率汇总评估建筑系统抵御燃烧产物通过的相对有效性的标准指南

Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates

可互换锥形接地接头的标准规范

Standard Specification for Interchangeable Taper-Ground Joints

溢流阀性能测试标准试验方法

Standard Test Method for Performance Testing of Excess Flow Valves

复合薄板材和固态现场成型衬垫材料的密封能力的标准试验方法

Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials

薄板、复合材料和固体形式原位垫圈材料密封性的标准试验方法

Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials

垫片材料的密封性的标准试验方法

Standard Test Methods for Sealability of Gasket Materials

垫片材料密封性的标准试验方法

Standard Test Methods for Sealability of Gasket Materials

垫片材料密封性的标准试验方法

Standard Test Methods for Sealability of Gasket Materials

F0586-垫片泄漏率与 Y 应力和 M 因子的标准测试方法

F0586-Standard Test Method For Leak Rates Versus Y Stresses And M Factors For Gaskets

建筑物的通风.管道系统.圆薄金属管道的强度和泄漏

Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts

生物技术.美利体育官网首页网址.渗漏性试验程序指南

Biotechnology - Equipment - Guidance on testing procedures for leaktightness

适用于所有制冷剂的便携式定位检漏仪和固定式气体美利体育登录入口官网仪的性能

Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants

电气和光学连接元件.试验方法.气密性

Elements of electrical and optical connection - Test methods - Hermeticity

环境测试 测试方法 测试 Q. 密封性

Environmental testing. Test methods. Test Q. Sealing

电子美利体育官网首页网址用连接器.试验和测量.密封试验.试验14b.密封.细微的漏气

Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14b - Sealing - Fine air leakage

半导体器件.机械和气候试验方法.密封

Semiconductor devices. Mechanical and climatic test methods. Sealing

电梯建造和安装的安全规则 检验和测试 层门防火测试

Safety rules for the construction and installation of lifts. Examination and tests - Landing doors fire resistance test

无损检验.泄漏试验.气体基准泄漏的校准

Non-destructive testing. Leak testing. Calibration of reference leaks for gases

真空技术.阀门.密封性试验

Vacuum technology - Valves - Leak test

最大泄漏率（气体密封性）标准 美利体育官网首页网址焊接、切割及相关工艺适用

Maximum leakage rate (gas tightness) Standard equipment Welding, cutting and related processes Applicable

焊接、切割及相关工艺用美利体育官网首页网址最大泄漏率（气密性）标准

STANDARD FOR MAXIMUM LEAKAGE RATES (GAS TIGHTNESS) OF EQUIPMENT USED FOR WELDING, CUTTING, AND ALLIED PROCESSES

标准用于压缩气体氢燃料站使用的配件

Standard accessories for use in compressed gas hydrogen fueling stations

基于泄漏率的垫片系数(m)和比压力(y)测试方法

Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

发声假体第1部分：评估物理特性的测试方法；文本为德语和英语

Voice prostheses - Part 1: Test methods for the evaluation of physical characteristics; Text in German and English

烟控闸门.第3部分:试验结果的应用

Smoke control shutters - Part 3: Application of test results

使用固体燃料的火炉.经由室内空气独立供暖的装置.第1部分:房间加热器

Fireplaces fired by solid fuel - Independent supply through the room air - Part 1: Roomheaters

废水处理厂 结构和技术美利体育官网首页网址设计原则 第4部分：水闸、水闸门、挡板等截流装置的具体原则

Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 4: Specific principles for shutoff devices as penstocks, sluice gates, stoplogs etc.

实验室美利体育官网首页网址 手套箱 第2部分：泄漏测试

Laboratory equipment - Glove boxes - Part 2: Leakage test

实验室美利体育官网首页网址.手套箱.第2部分:泄漏试验

Laboratory equipment - Glove boxes - Part 2: Leakage test

实验室美利体育官网首页网址 手套箱 第2部分：泄漏测试

Laboratory equipment - Glove boxes - Part 2: Leakage test

包装试验 软包装泄漏试验 第1部分：恒压法

Packaging test - Leakage test on flexible packagings - Part 1: Constant pressure method

包装试验 软包装泄漏试验 第1部分：恒压法

Packaging test - Leakage test on flexible packagings - Part 1: Constant pressure method

船用阀门技术规范.第2部分:试验方法和合理要求的调查

Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test

船用阀门技术规范 第2部分：可能要求和测试方法的调查

Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test

船用阀门技术规范.第3部分:蝶阀

Technical specifications for valves for shipboard use - Part 3: Butterfly valves

船用阀门技术规范第3部分：蝶阀

Technical specifications for valves for shipboard use - Part 3: Butterfly valves

制冷系统循环部件 第2部分：密封系统 要求

Circuit elements for refrigerating systems - Part 2: Sealed systems; Requirements

火焰监督装置 热电式火焰监督装置

Flame supervision device Thermoelectric flame supervision device

建筑物通风 空气终端装置 恒定和可变速率终端装置的空气动力学测试和评级

Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units; German version EN 12589:2001

热喷涂.热喷涂美利体育官网首页网址验收标准.第5部分:室内等离子喷雾

Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers English version of EN 1395-5:2007-04

热喷涂 热喷涂美利体育官网首页网址的验收检验 第5部分：室内等离子喷涂

Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers

移动式检漏器和卤化制冷剂室内监控器的性能

Performance of portable leak detectors and of room monitors for halogenated refrigerants; German version EN 14624:2012

建筑物通风 矩形截面金属板风管 强度和泄漏要求（草案）

Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage

建筑物通风.矩形面薄板金属送气管.强度和泄漏要求

Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; English version of DIN EN 1507:2006-07

门和遮板组件的耐火性试验.第3部分:防烟门和遮板

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies; German version EN 1634-3:2004

门和百叶窗组件、可打开的窗户和建筑五金元件的耐火和防烟测试 第3部分：门和百叶窗组件的防烟测试

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies; German version EN 1634-3:2004

烟囱 附件 第4部分：烟道阻尼器 要求和测试方法（草案）

Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods

烟囱 附件 第4部分：烟道阻尼器 要求和测试方法

Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods

无损检验.泄漏检验.选择检验方法和检验技术的标准

Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999

无损美利体育登录入口官网 泄漏美利体育登录入口官网 方法和技术选择标准

Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999

无损美利体育登录入口官网 泄漏美利体育登录入口官网 方法和技术选择标准 德语和英语版本 prEN 1779:2024

Non-destructive testing - Leak testing - Criteria for method and technique selection; German and English version prEN 1779:2024

航空航天系列.继电器和电流接触器用要求和试验程序.第412部分:密封件

Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal; German and English version EN 2349-412:2007

航空航天系列.电气和光学仪器连接元件.试验方法.第322部分:密封性试验

Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998

航空航天系列-电气和光学连接元件

Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998 / Note: Applies in conjunction with DIN EN 2591 (1992-12).

环境试验.第2部分:试验.试验Q:密封

Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994

电子美利体育官网首页网址用连接器.试验和测量.第14-2部分:密封试验.试验14b:密封.细微的漏气(IEC 60512-14-2:2006)

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006

电子美利体育官网首页网址连接器 测试和测量 第14-2部分：密封测试 测试 14b：密封 细微漏气

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this stand...

半导体器件.机械和气候试验方法.第8部分:密封

Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003

半导体器件 机械和气候测试方法 第8部分：密封

Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standa...

电梯建造和安装安全规则检验和试验第58部分：层门耐火试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test; German version EN 81-58:2022

电气和电子美利体育官网首页网址的机械结构 IT 机柜的通道封闭 第2部分：气流、空气分离和空气冷却要求的详细信息（IEC 62966-2:2020）；德文版 EN IEC 62966-2:2020

Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements (IEC 62966-2:2020); German version EN IEC 62966-2:2020

放射性物质的安全运输. 包装泄漏试验(ISO 12807-2018); 德文版 EN ISO 12807-2021

Safe transport of radioactive materials - Leakage testing on packages (ISO 12807:2018); German version EN ISO 12807:2021

工业用阀.漏气的测量、试验和鉴定程序.第2部分:阀门生产验收试验(ISO 15848-2-2015);德文版本EN ISO 15848-2-2015

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015); German version EN ISO 15848-2:2015

无损美利体育登录入口官网.泄漏美利体育登录入口官网.词汇(ISO 20484-2017);德文版本EN ISO 20484-2017

Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017); German version EN ISO 20484:2017

医疗保健应用中液体和气体的小口径连接器 第20部分：通用测试方法（ISO 80369-20:2015）

Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015)

医疗保健应用中用于液体和气体的小口径连接器 第20部分：通用测试方法

Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015); German version EN ISO 80369-20:2015

气焊及类似加工工艺美利体育官网首页网址的气体密封

Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989

液氦压力容器安全装置设计规范

Design specification for safety devices of liquid helium pressure vessels

压水堆燃料棒氦质谱检漏

Helium leak testing of nuclear fuel rod for PWR

管法兰用垫片密封性能试验方法

Test method for sealing performance of gaskets for pipe flanges

非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法

Classification system and test methods for nonmetallic gasket materials-Part4:Standard test method for sealability of gasket materials

高压超高压安全阀离线校验与评定

Offline inspection and evaluation of high and super-high pressure safety valves

气焊及相关工艺美利体育官网首页网址的气密性

Gas tightness of equipment for gas welding and allied processes

放射性物品运输容器安全试验方法 第8部分：泄漏试验

Methods for Safety Testing of Containers for the Transport of Radioactive Material - Part 8: Leak Test

管法兰用垫片高温密封性能试验方法

Test Method for High Temperature Sealing Performance of Gasket for Pipe Flange

基本环境试验规程 第2-17部分:试验 试验Q:密封

Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing

工业阀.漏气的测量、试验和鉴定程序.第1部分:阀门定型试验的分类系统和鉴定程序

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves

无损美利体育登录入口官网.泄漏美利体育登录入口官网.气体参考泄漏的校准

Non-destructive testing - Leak testing - Calibration of reference leaks for gases

麻醉和呼吸美利体育官网首页网址.语音假体

Anaesthetic and respiratory equipment - Voice prostheses

真空技术.阀门.密封性试验

Vacuum technology - Valves - Leak test

防火试验.防烟门和卷帘组件.第1部分:室温和环境温度漏气试验

Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests

防烟门、百叶窗组件和自动关闭的玻璃元件 常温及中温泄漏试验

Smoke-control door, shutter assemblies and self-closing glazed elements — Ambient-temperature and medium-temperature leakage tests

管道法兰垫圈密封的试验方法

Test method for sealing behavior of gaskets for pipe flanges

基本环境试验过程.第2部分:试验.试验Q:密封

Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing

环境试验方法－电气与电子－ 第2-17部分：密封（气密性）试验方法（试验代号：Q）

Environmental testing-Part 2-17: Tests-Test Q: Sealing

微生物用HEPA过滤器的试验方法

Test method of HEPA filters for microbiological use

呼吸保护装置泄漏率试验方法

Leakage rate testing method for respiratory protective devices

操作放射性物质搬运用手套箱

Glove box for handling of radioactive substance

手套箱漏泄美利体育登录入口官网的试验方法

Test method for leakage of glove boxes

青铜闸阀、截止阀、角阀和止回阀

Bronze gate, globe, angle and check valves

反应堆安全壳泄漏测试

Leakage Test of the Reactor Containment Vessel

近域测试 密封性检查 可变压力法

Non-destructive testing - Leak testing - Pressure change method

电梯制造与安装安全规则 检查与试验 第58部分：电梯层门耐火试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

焊接美利体育官网首页网址及相关工艺的气密性 (ISO 9090:1989, IDT)

GAS TIGHTNESS OF EQUIPMENT FOR GAS WELDING AND ALLIED PROCESSES (ISO 9090:1989, IDT)

阀门压力试验

Pressure Testing of Valves Standard Practice

核电厂安全壳密封性试验

Containment leaktightness test for nuclear power plants

压水堆核电厂主蒸汽管道泄漏监测系统设计准则

Design criteria for main steam pipeline leakage monitoring system of pressurized water reactor nuclear power plant

电梯建造和安装安全规程 检验和试验 第58部分：层门耐火试验

Safety rules for the construction and installation of elevators - Examinations and tests - Part 58: fire resistance test of landing doors

电梯制造与安装安全规范 检查和试验 第58部分:层门防火试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58 : landing doors fire resistance test

在役部件的外部液压泄漏

External Hydraulic Leakage for In-Service Components

液压流体动力阀内部渗漏的测量和报告

Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

测量和报告液压流体动力阀的内部泄漏

Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

泄漏美利体育登录入口官网的信息报告;

Leakage Testing

燃油组件和系统密封性规范和试验规程(或方法)

Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods)

电动汽车电池组液体防漏性能评估方法信息报告

Liquid Leak Tightness Evaluation Methodology for EV Battery Packs Informational Report

泄漏率的统一测量单位

Uniform Measurement Units for Leakage Rates

泄漏美利体育登录入口官网系统 第5部分：油箱压力表泄漏美利体育登录入口官网系统

Leak detection systems - Part 5: Tank gauge leak detection systems

便携式定位泄漏美利体育登录入口官网器和固定式气体美利体育登录入口官网器对所有制冷剂的性能

Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants

电梯安装和施工安全规则 检查和试验 第58部分：着陆门防火测试

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

热核聚变反应堆中高温承压部件的热氦检漏方法（ISO 4233:2023 等同采用）

Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors (ISO 4233:2023, IDT)

非破坏性测试 泄漏测试 方法和技术选择标准

NON-DESTRUCTIVE TESTING. LEAK TESTING. CRITERIA FOR METHOD AND TECHNIQUE SELECTION.

环境测试 第2部分：测试 测试问题：密封

ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.

电梯建造和安装安全规则检验和试验第58部分：层门防火试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

工业阀门 无组织排放的测量、测试和鉴定程序 第1部分：阀门型式试验的分类系统和鉴定程序

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)

电梯制造与安装安全规范 检查与试验 第58部分：层门防火试验

Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test

辐射防护 密封源 泄漏测试方法 (ISO/CD 9978:2018)

Radiation protection - Sealed sources - Leakage test methods (ISO/CD 9978:2018); Text in German and English

家用和类似用途电气美利体育官网首页网址安全—第2-40部分：电热泵、空调器和除湿机的特殊要求

Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

排放控制 法兰连接的密封常数

Emission control - Sealing constants for flange connections

板状垫片的泄漏和排放特性：第 1 部分和第 1 部分第2部分

Leakage and Emission Characteristics of Sheet Gaskets: Part 1 & Part 2

凸面对焊法兰的泄漏测试

Leak Testing of a Raised Face Weld Neck Flange

长期加压石墨垫片接头测试：第 1 部分、第 2 部分和第 1 部分第三部分

Long Term Pressurized Graphite Gasketed Joint Tests: Part 1, Part 2, & Part 3