美利体育登录入口官网

铜及铜合金——用于塑料和多层管的压接连接件——要求

Copper and copper alloys — Fittings with press ends for use with plastics and multilayer pipes — Requirements

预制连接系统中的连接设计指南

Design Guide for Connections in Precast Jointed Systems

预制混凝土结构的设计建议

Design Recommendations for Precast Concrete Structures

混凝土连接的重要性

Importance of Concrete Connections

套管和油管连接测试程序（第四版）

Procedures for Testing Casing and Tubing Connections (FOURTH EDITION)

环境试验．试验．Kd试验指南：对触头和连接进行的硫化氢试验

Environmental testing - Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

机械安全 显示、控制、执行器和信号 指示、标记和启动 标记要求

Requirements for machinery safety displays, controls, actuators and signal indications, markings and start-up markings

土工膜与贯穿件或结构机械连接的标准指南

Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

多层热塑性和柔性钢管及连接件的标准规范

Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections

塑料供水、压缩水或排水管道系统或卫生排水 基于不饱和聚酯树脂的热增强塑料（GRP）系统...

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

机械和机电飞机指示器通用要求规范

Specification for General requirements for mechanical and electromechanical aircraft indicators

轨道交通.油罐车.加热连接装置

Railway applications. Tank wagons. Heating connections

内河航行船舶 废水排放连接

Inland navigation vessels. Connections for the discharge of waste water

幕墙 剪切连接强度的测定 测试方法及要求

Curtain walling. Determination of the strength of shear connections. Test method and requirements

螺纹通道中螺钉拔出力的测定

Determination of screw pull out forces from screw thread channels

建筑信息模型（BIM） 语义建：土唇樱⊿ML） 领域特定建模模式

Building information modelling (BIM). Semantic modelling and linking (SML) - Domain-specific modelling patterns

欧洲法规3.钢结构的设计.第1-8部分:接头设计

Eurocode 3: Design of steel structures. Part 1-8: Design of joints

欧洲规范5. 木结构设计 一般规则和建筑物规则

Eurocode 5. Design of timber structures - General rules and rules for buildings

防护服 - 防止液态和气态化学物质，包括液态气溶胶和固态颗粒 - 测试方法：气密服密封性的测定（内压测试）

Protective clothing — Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles — Test method : Determination of leak - tightness of gas - tight suits (Internal Pressure Test)

防护服 - 液体化学品防护 - 第1部分：不同部分之间具有液密连接的化学防护服的性能要求（3类美利体育官网首页网址）

Protective clothing — Protection against liquid chemicals — Part 1 : Performance requirements for chemical protective clothing with liquid - tight connections between different parts ofthe clothing (type 3 equipment)

标称电压大于 1000 V 的架空线路用复合串绝缘子单元 标准强度等级和端部配件

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V. Standard strength classes and end fittings

土工织物及其有关产品.内部结构连接强度.土工合成物

Geotextiles and geotextile-related products - Strength of internal structural junctions - Geocomposites

液压传动和通用金属管连接. 24度角连接器

Metallic tube connections for fluid power and general use. 24 cone connectors

光学和光学仪器 大地测量仪器的辅助装置 三脚架

Optics and optical instruments. Ancillary devices for geodetic instruments - Tripods

图表的图形符号 连接和相关美利体育官网首页网址

Graphical symbols for diagrams. Connections and related devices

供应气体燃料用塑料管系统. 聚乙烯(PE). 系统用配合性

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for purpose of the system

残留压力阀的使用

USE OF RESIDUAL PRESSURE VALVES

设计钢结构

Design Steel Structure

供水、排水和压力下水道用塑料管道系统 聚乙烯 (PE) 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure – Polyethylene (PE) – Part 2: Pipes

建筑信息模型 (BIM) 语义建：土唇 (SML) 第2部分：领域特定建模模式

Building information modelling (BIM) – Semantic modelling and linking (SML) – Part 2: Domain-specific modelling patterns

欧洲规范 3 – 钢结构设计 – 第1-8部分：接头

Eurocode 3 – Design of steel structures – Part 1-8: Joints

用纺织物和塑料薄膜(篷帐布)制造的建筑物和帐篷罩部件.第1部分:涂聚氯乙烯(PVC)的聚酯基底纤维

Components for enclosures made of textile fabrics and plastic films (awnings) for structures and tents - Part 1: PVC coated polyester base fabric

建筑物大型屋顶的消防安全 从下面的火灾暴露 第3部分：屋顶穿透和屋顶边缘 要求和测试

Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Roof penetrations and roof edges - Requirements and testing

建筑物大型屋顶的消防安全 从下面发生的火灾 第4部分：满足 DIN 18234-3 要求且无需进一步提供证据的屋顶贯穿件和屋顶边缘列表

Fire safety of large roofs for buildings - Fire exposure from below - Part 4: List of roof penetrations and roof edges, which fulfil the requirements of DIN 18234-3 without further provision of evidence

用于饮用水系统安装的金属管道用金属制成的不可分离的弹性体密封连接器 一般要求和测试方法

Inseparable elastomer sealed connectors made of metal for metallic pipes for use in drinking water system installation - General requirements and test methods

钢水管和配件

Steel water pipes and fittings

建筑物绝热和能量经济学.第7部分:建筑物气密性.计划和执行的要求,推荐标准和实例

Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance

建筑物的隔热和能源经济 第7部分：建筑物的气密性 规划和性能的要求、建议和示例

Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance

管道用聚丙烯管材及附件用于热水地板供暖系统 特殊要求和试验

Polypropylene pipes and accessories for hot water floor heating systems - Particular requirements and tests

纺织机械.纺织机械用传输带

Textile machinery - Conveyors for textile machinery

拆卸制造工艺.分类、细类、定义

Manufacturing processes disassembling - Classification, subdivision, definitions

连接加工工艺 第0部分：总则 分类、细分类、术语和定义

Manufacturing processes joining - Part 0: General; Classification, subdivision, terms and definitions

连接加工工艺.第0部分:总则.分类、细分类、术语和定义

Manufacturing processes joining - Part 0: General; Classification, subdivision, terms and definitions

连接制造工艺 第0部分：概述

Manufacturing processes joining - Part 0: General; Classification, subdivision, terms and definitions

连接制造工艺 第7部分：软焊或钎焊连接

Manufacturing processes joining - Part 7: Joining by soldering or brazing; Classification, subdivision, terms and definitions

用于连接钢管和管件的接头 用于输送水和其他含水液体

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids; German version EN 10311:2005

塑料管道系统.非承压热塑管道系统.防水性试验方法

Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995

连接的可用性

Usability of the connections

天然气基础设施. 最大操作压力小于等于16 bar的管道. 第5部分: 服务领域. 特殊功能要求; 德文版本EN 12007-5-2014

Gas infrastructure - Pipelines for maximium operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements; German version EN 12007-5:2014

供水、排水和下水道用塑料管道系统 聚乙烯（PE） 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

预制混凝土制品 地基桩（草案）

Precast concrete products - Foundation piles

塑料管系统 用于地埋和地上压力系统的给水、排水和污水管 聚乙烯（PE） 第5部分：系统的适用性

Plastics piping systems Polyethylene (PE) for water, drainage and sewerage for buried and above-ground pressure systems Part 5: Suitability of the system

建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003

建筑阀门 建筑物饮用水供应用手动铜合金和不锈钢球阀 试验和要求

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003 / Note: To be replaced by DIN EN 13828 (2023-02).

轨道交通.制动系统管路和总储气管用直旋塞和转角管塞;德文版14601-2005+A1-2010

Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe; German version EN 14601:2005+A1:2010

塑料管道系统 非压力排水和下水道用无饱和聚酯树脂基玻璃纤维增强热固性塑料（GRP） 第5部分：接头的适用性

Plastics piping systems - Glass-fibre reinforced thermosetting plastics (GRP) based on unsaturated polyester resins for non-pressure drainage and sewerage - Part 5: Fitness for use of fittings

幕墙 剪切连接强度的测定 试验方法和要求（草案）

Curtain walling - Determination of the strength of shear connections - Test method and requirements

幕墙. 剪切连接强度的测定. 试验方法和要求; 德文版本EN 16758-2021

Curtain walling - Determination of the strength of shear connections - Test method and requirements; German version EN 16758:2021

从螺纹通道中确定螺钉拔出力（草案）

Determination of screw pull out forces from screw thread channels

从螺纹通道中确定螺钉拔出力；德文版 EN 17490:2021

Determination of screw pull out forces from screw thread channels; German version EN 17490:2021

测定螺钉从螺纹通道中拔出的力

Determination of screw pull out forces from screw thread channels; German version EN 17490:2021

建筑信息建模（BIM） 意义模型与链接（SML） 第2部分：领域特定的建模模式 德语版 EN 17632-2:2024

Building Information Modelling (BIM) - Semantic modelling and linking (SML) - Part 2: Domain-specific modelling patterns; German version EN 17632-2:2024

建筑信息模型（BIM） 语义建：土唇樱⊿ML） 第2部分：特定领域的建模模式；德文版 EN 17632-2:2024

Building Information Modeling (BIM) - Semantic modeling and linking (SML) - Part 2: Domain-specific modeling patterns; German version EN 17632-2:2024

Eurocode 3: 设计钢结构 - 第1-8部分：接头设计

Eurocode 3: Design of steel structures - Part 1-8: Design of joints

欧洲规范 3：钢结构的设计和施工 第8部分：连接设计

Eurocode 3: Design and construction of steel structures – Part 1-8: Design of connections

欧洲规范 3：钢结构的设计和施工 第8部分：连接设计

Eurocode 3: Design and construction of steel structures – Part 1-8: Design of connections

欧洲规范3:钢结构设计.第1-8部分:连接头设计.德文版本EN 1993-1-8-2005 + AC-2009

Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German version EN 1993-1-8:2005 + AC:2009

欧洲规范 3：钢结构设计 第1-8部分：接头设计

Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German version EN 1993-1-8:2005 + AC:2009 / Note: To be replaced by DIN EN 1993-1-8 (2021-03).

欧洲规范 3：钢结构设计 第 1-8 部分：接缝设计

Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German and English version prEN 1993-1-8:2021

欧洲规范 3：钢结构设计 第1-8部分：接头设计

Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German and English version prEN 1993-1-8:2021 / Note: Date of issue 2021-01-29*Intended as replacement for DIN EN 1993-1-8 (2010-12).

欧洲规范 3 钢结构设计 第1-8部分：节点

Eurocode 3 - Design of steel structures - Part 1-8: Joints; German version EN 1993-1-8:2024

欧洲规范5：木结构设计 第一部分第一分节

Eurocode 5: Design of timber structures - Part 1-1: General

欧洲规范 5 木结构设计 第 1-1 部分：一般规则和建筑物规则

Eurocode 5 - Design of timber structures - Part 1-1: General rules and rules for buildings

国家附录 - 国家确定的参数 - 欧洲规范 5：木结构设计 - 第 1-1 部分：一般 - 建筑物的通用规则和规则

National Annex - Nationally determined parameters - Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings / Note: Applies in conjunction with DIN EN 1995-1-1 (2010-12).

欧洲规范 9：铝结构设计 第1-1部分：一般结构规则

Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules; German and English version prEN 1999-1-1:2021 / Note: Date of issue 2021-02-26*Intended as replacement for DIN EN 1999-1-1 (2010-05).

欧洲规范 9 铝结构设计 第1-1部分：一般规则

Eurocode 9 - Design of aluminium structures - Part 1-1: General rules; German version EN 1999-1-1:2023

Eurocode 9 铝结构设计 第一部分-1: 通用规则 德文版本 EN 1999-1-1:2023

Eurocode 9 - Design of aluminium structures - Part 1-1: General rules; German version EN 1999-1-1:2023

防护服.液态和气态包括液态气溶胶和固体颗粒的化学制品的防护.试验方法.防护服气密性的测定 (内压试验); 德文版本 EN 464:1994

Protective clothing - Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test); German version EN 464:1994

光纤波长开关.总规范(IEC 62099:2001)

Fibre optic wavelength switches - Generic specification (IEC 62099:2001); German version EN 62099:2001

土工布.用宽条法对接头/接缝处的拉伸试验

Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008

土工合成材料-采用宽幅条法对接缝/接缝进行拉伸试验

Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008

土工织物及其相关产品.内部结构连接强度.第1部分:土工网眼

Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003

土工布和土工布相关产品 内部结构连接的强度 第1部分：土工格室（ISO 13426-1:2019）

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2019)

土工织物和土工织物相关产品 内部结构连接强度 第1部分：土工格室

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2019); German version EN ISO 13426-1:2019

土工织物及其有关产品.内部结构连接强度.第2部分:土工合成物

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005); German version EN ISO 13426-2:2005

土工织物和土工织物相关产品 内部结构连接强度 第2部分：土工复合材料

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005); German version EN ISO 13426-2:2005

石油和天然气工业.套管和管道连接器的测试程序(ISO 13679-2002)

Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002); English version EN ISO 13679:2006

牙科 – 可逆-不可逆水胶体印模材料系统

Dentistry – Reversible-irreversible hydrocolloid impression material systems

技术图纸 粘合、折叠和压接接头的符号表示和指示

Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002); German version EN ISO 15785:2002

冷热水装置用塑料管道系统 聚丙烯（PP） 第5部分：系统适用性（ISO 15874-5:2013 + Amd. 1:2018）

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013 + Amd. 1:2018); German and English version EN ISO 15874-5:2013 + A1:2018

用于热水和冷水装置的塑料管道系统 聚丙烯

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013 + Amd. 1:2018); German and English version EN ISO 15874-5:2013 + A1:2018 / Note: This standard is part of th...

冷热水装置用塑料管道美利体育官网首页网址. 交联聚乙烯(PE-X). 第5部分: 系统的适应性(ISO 15875-5-2003+Amd 1-2020); 德文和英文版本EN ISO 15875-5-2003+A1-2020

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003 + Amd 1:2020); German and English version EN ISO 15875-5:2003 + A1:2020

冷热水装置用塑料管道美利体育官网首页网址.聚丁烯(PB).第5部分:系统的适应性

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003

冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第5部分:系统用途的适当性(ISO 15877-5-2009 + AMD 1-2010).德文版本EN ISO 15877-5-2009 + A1-2010

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009 + AMD 1:2010); German version EN ISO 15877-5:2009 + A1:2010

用于热水和冷水装置的塑料管道系统 耐高温聚乙烯

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009 + Amd. 1:2020); German and English version EN ISO 22391-2:2009 + A1:2020 / Note: This standard is par...

冷热水装置用塑料管道系统.耐升温的聚乙烯(PE-RT).第5部分:系统的适用性

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009); German version EN ISO 22391-5:2009

压力和非压力供水、排水或污水处理用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统（ISO 23856:2021）

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021); German version EN ISO 23856:2021

用于压力和非压力供水、排水或污水处理的塑料管道系统 - 基于不饱和聚酯 (UP) 树脂的玻璃增强热固性塑料 (GRP) 系统 (ISO 23856:2021)

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021); German version EN ISO 23856:2021 / Note: This s...

道路车辆.车载电线束的连接.第2部分:定义、试验方法和一般性能要求(ISO 8092-2-2005)

Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005); English version of DIN EN ISO 8092-2:2006-10

工业通信网络 现场总线规范 第600部分 应用层协议规范

Industrial communication networks - Fieldbus specifications - Part 600: Application Layer protocol specification

光学和光学仪器 大地测量仪器的辅助美利体育官网首页网址 第2部分：三脚架

Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods

图形符号用于图示 第3部分：连接和相关装置

Graphical symbols used to illustrate Part 3: Connections and associated devices

媒体密集型建筑的媒体和房间要求的 BIM 分类代码

BIM Classification code for media and room requirement for media-intensive buildings

钢结构稳定性证明的文件化

Documentation of the verification of stability for steel constructions

热绝缘建筑 部分 7：建筑部件和连接的气密性 规划和性能推荐及示例

Thermally insulated buildings Part 7: Recommendations and examples for planning and performance of airtightness of building components and connections

城市公园规划设计规范

Urban Park Planning and Design Specifications

用于供水、带压排水沟和下水道的塑料管道系统 聚乙烯 (PE) 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

欧洲法规3.钢结构的设计.第1-18部分:接头设计 包含修改件AC1,2009

European Regulation 3. Design of steel structures. Part 1-18: Design of joints including modification AC1, 2009

环境工程（EE） 400 VDC 数据和电信（ICT）美利体育官网首页网址的接地和连接

Environmental Engineering (EE); Earthing and bonding of 400 VDC data and telecom (ICT) equipment

宽带综合业务数字网（B-ISDN） 异步传输模式（ATM）网络中多点通信的支持

Broadband Integrated Services Digital Network (B-ISDN); Support of multipoint communications in Asynchronous Transfer Mode (ATM) networks

欧洲数字蜂窝电信系统（第 2 阶段） GSM 公共陆地移动网络 (PLMN) 连接类型 (GSM 03.10)

European digital cellular telecommunications system (Phase 2); GSM Public Land Mobile Network (PLMN) connection types (GSM 03.10)

网络方面（NA） 术语和定义

Network Aspects (NA); Terms and definitions

数字蜂窝电信系统（第 2 阶段+） (GSM) GSM 公共陆地移动网络 (PLMN) 连接类型（GSM 03.10 版本 6.0.0 1997 年发布）

Digital cellular telecommunications system (Phase 2+) (GSM); GSM Public Land Mobile Network (PLMN) connection types (GSM 03.10 version 6.0.0 Release 1997)

数字宽带电缆接入公共电信网络 IP 多媒体时间关键服务 第 13 部分：中继网关控制协议 子部分 2：MGCP 选项

Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 13: Trunking Gateway Control Protocol; Sub-part 2: MGCP option

卫星地面站和系统(SES).宽带卫星多媒体(BSM).再生卫星网络-B(RSM-B).再生卫星的DVB-S/DVB-RCS系列.第3部分:连接控制协议(版本1.1.1)

Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Regenerative Satellite Mesh - B (RSM-B); DVB-S/DVB-RCS family for regenerative satellites; Part 3: Connection control protocol (V1.1.1)

缩微摄影技术.有影像缩微胶片的连接

Micrographics-Splices of microfilm with image.Dimensions and operational constraints

信息技术 高性能并行接口 第1部分:机械、电气及信号协议规范(HIPPI-PH)

Information technology-High-Performance Parallel Interface-Part 1:Mechanical,electrical and signaling protocol specification (HIPPI-PH)

简图用图形符号.第3部分;连接件与有关装置

Graphical symbols for diagrams.Part 3: Connections and related devices

可拆卸木模型和型芯箱用插入缀缝钉连接.结构

Joints by inserted dowels for wooden split patterns and core boxes. Design

仪器与装置同外部液压和气体管线的连接.型式，基本参数和尺寸.技术要求

Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

有工艺管路和配件的一次温度转换器的连接.型号及基本尺寸.技术要求

Joints fastening primary temperature transducers to process pipe-lines and apparatus. Types and basic dimensions. Technical requirements

木制结构. 术语和定义

Wooden structures. Terms and definitions

使用带齿金属销钉连接木质结构元件 确定阻力和顺应性标准值和计算值的方法

Connections of elements of wooden constructions on a tooth plate connectors. Test methods for determining the values of characteristic and design resistance and compliance

职业安全标准体系.液态或包括悬浮颗粒与固体物质的气态化合物的防护服.气密性服装防渗漏性的测定方法

Occupational safety standards system. Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles. Method for determination of leak-tightness of gas-tight suits

塑料管材供水、排水和污水压力系统 聚乙烯（PE） 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

压力和非压力供水、排水或污水处理用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

国际电工词汇 第151部分：电和磁的器件

International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices

电子美利体育官网首页网址用连接器.试验和测量方法.第11-7部分:气候试验.试验11g:流动混合气体腐蚀试验

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test

位于地震活跃区的公交系统设计推荐规程

Recommended Practice for the Design of Buswork Located in Seismically Active Areas

用于指定语音级信道传输参数和评估语音电话连接传输性能的 IEEE 标准方法

IEEE Standard Methodologies for Specifying Voice Grade Channel Transmission Parameters and Evaluating Connection Transmission Performance for Speech Telephony

用于变电站接地的合格永久连接的 IEEE 标准

IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding

用于输送燃气的塑料管道系统 用于热熔和机械连接的非增塑聚酰胺（PA-U）管道系统 符合性评估

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing. Conformity assessment.

接地材料 通过冷塑性变形实现的铜压接连接 制造、试验及规格的一般要求（连接器、模具及附件）

Accesories for earthing (grounding). Molecular cold compression copper connections. General conditions for manufacturing.

灰铸铁承插式管件及其连接 用于住宅安装

Cast iron pipes and fittings spigot-spigot and their joint for domiciliary installations.

土工布及其有关产品.内部结构连接强度.第1部分:土工网眼

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells

土工织物及其有关产品.内部结构连接强度.第2部分:土工合成织物

Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites

简图用图形符号.第3部分:连接件与相关装置

Graphical symbols for diagrams - Part 3: Connections and related devices

道路车辆 带有插销和螺旋锁的4柱电连接器 第2部分：试验和要求

Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements

道路车辆 车载电气线束的连接 第4部分:单极和多极连接插头 尺寸和特殊要求

Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements

传输规划 G 系列：传输系统和媒体国际电话连接和电路 一般定义（第 12 研究组）

Transmission Plan - Series G: Transmission Systems and Media International Telephone Connections and Circuits - General Definitions (Study Group 12)

自动交换光网络（ASON）的术语和定义

Terms and definitions for Automatically Switched Optical Networks (ASON)

自动交换光网络术语和定义

Terms and definitions for automatically switched optical networks

国际端到端连接,恒定比特率数字信道的差错性能参数和目标.系列G:传输系统和媒体数字系统和网络.数字网络.质量和可用性目标.13号研究组

End-to-end error performance parameters and objectives for international, constant bit-rate digital paths and connections

国际多运营商 PDH 路径和连接的投入使用和维护的性能限制 M 系列：TMN 和网络维护：国际传输系统 电话电路 电报 传真和租用电路

Performance limits for bringing-into-service and maintenance of international multi-operator PDH paths and connections SERIES M: TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS@ TELEPHONE CIRCUITS@ TELEGRAPHY@ FACSIMILE AND LEASED CIRCUITS

玻璃纤维增强热固性塑料(GRP)制管道和配件.与压力相关的术语定义、包括术语之间的关系及安装和连接的术语

Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationships between them, and terms for installation and jointing

供水和压力排水和下水道用塑料管道系统 聚乙烯 (PE) 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

从螺纹通道测定螺钉拔出力的标准方法

Determination of screw pull out forces from screw thread channels

统计信息建模 (BIM) 语义建模与连接 (SML) 第二部分：领域特定建模模式

Building information modelling (BIM) - Semantic modelling and linking (SML) - Part 2: Domain-specific modelling patterns

欧洲规范3：钢结构设计 第1-8部分：节点（自2027年9月30日起适用于设计）

Eurocode 3 - Design of steel structures - Part 1-8: Joints

欧洲规范第5号：木结构结构设计 第1-1部分：通用规则及建筑规则（自2027年9月30日起实施于设计）

Eurocode 5 - Design of timber structures - Part 1-1: General rules and rules for buildings

欧洲规范 9：铝结构设计 第1-1部分：通用规则（将于 2027 年 9 月 30 日起应用于设计）

Eurocode 9 - Design of aluminium structures - Part 1-1: General rules

血管导管 无菌和一次性导管 第6部分：皮下植入式血管通路装置（ISO 10555-6:2015）

Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)

用于链锯防护装备 第2部分：腿部防护装备的性能要求及测试方法（ISO 11393-2:2018）

Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)

石油、石油化学和天然气工业 管道系统的阴极保护 第1部分：地上管道（ISO 15589-1:2015）

Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015)

液压和气动传动用通用金属管接头 第1部分：24°圆锥接头（ISO 8434-1:2018 2018-10 修正版）

Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018, Corrected version 2018-10)

金属夏罗拉系统

Metal charola systems

电工词汇.第151部分:电气装置和磁性装置

Electrotechnical Vocabulary - Part 151 : electrical and magnetic devices.

建筑信息模型 (BIM) 语义建：土唇 (SML) 第2部分：特定领域建模模式

Building information modelling (BIM) - Semantic modelling and linking (SML) - Part 2 : domain-specific modelling patterns

铁路固定美利体育官网首页网址和机车车辆 金属结构可调电容器

Railway fixed equipment and rolling stock. Controllable metallized frame capacitors.

ISO/PAS 8329:2024 的英国实施版本

UK implementation of ISO/PAS 8329:2024

回填 ASME B31.4 和 B31.8 金属和非金属管道

Backfilling of ASME B31.4 and B31.8 Metallic & Nonmetallic Pipelines

EDIF 连接专着系列（以前称为 TechAmerica EIA-EDIF-2）

EDIF Connectivity Monograph Series (Formerly TechAmerica EIA-EDIF-2)

飞机流体系统的管道和管接头（公制）

PIPELINES AND PIPE COUPLINGS FOR AIRCRAFT FLUID SYSTEMS (METRIC)

欧洲规范 3：钢结构设计 - 第1-8部分：节点设计

Eurocode 3: Design of steel structures - Part 1-8: Design of joints

供水、排水和下水道用塑料管道系统 聚乙烯

Plastics piping systems for water supply, and for drains and sewers under pressure — Polyethylene (PE) — Part 2: Pipes

幕墙 剪切连接强度的确定 试验方法和要求

Curtain walling - Determination of the strength of shear connections - Test method and requirements

建筑信息建模（BIM） 语义建：土唇樱⊿ML） 第二部分：领域特定的建模模式

Building Information Modelling (BIM) — Semantic Modelling and Linking (SML) — Part 2: Domain-specific modelling patterns

欧洲规范3 钢结构设计 第1-8部分：接头

Eurocode 3 — Design of steel structures — Part 1-8: Joints

欧洲规范5 木结构设计 第1-1部分：一般规则和建筑规则

Eurocode 5 — Design of timber structures — Part 1-1: General rules and rules for buildings

欧洲规范9 铝结构设计 第一部分-1: 通用规则

Eurocode 9 - Design of aluminium structures - Part 1-1: General rules

航空航天系列 电气连接 技术规范

Aerospace series - Electrical bonding - Technical specification

热水和冷水管路用塑料管系统 聚丙烯（PP） 第5部分：系统的适用性（ISO 15874-5:2013）

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)

热水和冷水安装用塑料管系统 戊烯（PB） 第5部分：系统的适用性（ISO 15876-5:2017）

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)

道路车辆 车载电线束连接 第2部分：定义、试验方法和一般性能要求（ISO 8092-2:2005）

Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005)

金属管接头用于流体动力和通用用途 第1部分：24°圆锥接头（ISO 8434-1:2018）

Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018)

图表的图形符号 第3部分:连接和相关美利体育官网首页网址

Graphical symbols for diagrams - Part 3: Connections and related devices

铁路应用 罐车 第8部分：加热连接

Railway applications - Tank wagons - Part 8: Heating connections

航空航天系列 电气接合 技术规范

Aerospace series - Electrical bonding - Technical specification (Endorsed by Asociación Espa?ola de Normalización in October of 2019.)

供水、排水和压力下水道用塑料管道系统 聚乙烯 (PE) 第2部分：管道

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes

建筑信息建模（BIM） 建模与语义连接（SML） 第2部分：特定领域建模模型

Building information modelling (BIM) - Semantic modelling and linking (SML) - Part 2: Domain-specific modelling patterns

欧洲规范 3-钢结构设计 第1-8部分：接头

Eurocode 3 - Design of steel structures - Part 1-8: Joints

欧洲规范5 木结构设计 第1-1部分：一般规则和建筑规则

Eurocode 5 - Design of timber structures - Part 1-1: General rules and rules for buildings

欧洲规范 9 铝结构设计 第1-1部分：一般规则

Eurocode 9 - Design of aluminium structures - Part 1-1: General rules

铁路应用 电磁兼容性 第3-2部分：机车车辆 美利体育官网首页网址

Bahnanwendungen - Elektromagnetische Vertraeglichkeit - Teil 3-2: Bahnfahrzeuge - Geraete; Deutsche Fassung EN 50121-3-2:2016

闪电防护 第3部分：结构物理损坏和人身：Ρ； 补充4：金属屋顶在闪电防护系统中的使用

Lightning protection Part 3: Protection against physical damage to structures and personal hazards Supplement 4: Use of metal roofs in lightning protection systems

IP网络基于UDP的多路复用安全传输协议（QUIC）技术要求

Technical requirements for UDP-based multiplexing secure transmission protocol (QUIC) for IP networks