美利体育登录入口官网

工业液压液用弹性密封件能力测定的标准试验方法和建议极限值

Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

环形密封圈（“O”形圈）及其外壳（英制系列）尺寸规范

Specification for Dimensions of toroidal sealing rings ("O"- rings) and their housings (inch series)

航空航天系列.24 °带锁环的螺纹适配器接口.几何构型

Aerospace series - 24 ° interface for adaptors, threaded, with lockring - Geometric configuration

碳氟橡胶制低压缩永久变形O形环.硬度:80IRHD

O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

液压动力系统.O形密封圈.抗挤压密封圈(支撑密封圈)

Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)

液压流体动力和一般用途的连接 - 带 ISO 261 公制螺纹和 O 形圈密封的端口和螺柱端 - 第3部分：轻型（L 系列）螺柱端的尺寸、设计、测试方法和要求

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O - ring sealing — Part 3 : Dimensions, design, test methods and requirements for light - duty (L series) stud ends

食品和化学工业用不锈钢配件.第1部分:短型卫生螺纹管接头

Stainless steel fittings for the food and chemical industry - Part 1: Hygienic screwed pipe connection, short type

用于食品和化学工业卫生应用的不锈钢部件 第2部分：法兰连接

Stainless steel components for hygienic applications in the food and the chemical industries - Part 2: Flange connections

无菌,食品和化学工业用不锈钢管件 第3部分：管连接用卫生短管夹

Stainless steel fittings for the food and chemical industry - Part 3: Hygienic clamp pipe connection, short type

无菌,食品和化学工业用不锈钢管件.第3部分:管连接用卫生短管夹

Stainless steel fittings for the food and chemical industry - Part 3: Hygienic clamp pipe connection, short type

液压传动循环管路用U形锁扣连接件

Staple-lock couplings for hydraulic power-transmission circuits

用于液压动力传输回路的卡钉锁联轴器

Staple-lock couplings for hydraulic power-transmission circuits

液压动力传输管路用S型钩环锁定联接器.尺寸、要求和试验

Staple-lock couplings type S for hydraulic power-transmission circuits - Dimensions, requirements, testing

螺钉和螺母的装配工具.方头套筒扳手,电动和附件.技术规范和试验扭矩

Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques

螺钉和螺母装配工具 方头套筒扳手 电动和附件 技术规格和测试扭矩

Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques

压合接头.符合 DIN EN ISO 8434-1 的压接用带 'O' 型密封圈的24度螺纹接头

Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1

非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密封圈的旋转弯管

Non-soldered compression fittings - Swivel elbows with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1

航空航天系列.弹性O型圈.尺寸规格.德文和英文文本

Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English

航空航天系列-弹性O型圈-尺寸

Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English

航空航天系列.弹性O形密封圈.技术规范

Aerospace series - Elastomeric O-rings - Technical specification; Text in German and Englisch

航空航天系列弹性O型圈技术规范

Aerospace series - Elastomeric O-rings - Technical specification; Text in German and English

航空航天系列.带锁环的螺纹适配器用端口.几何形状

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005

航空航天系列.带锁环的螺纹适配器用端口.几何形状

Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005

航空航天系列.带锁环的螺纹适配器用8°30'接口.几何形状

Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2604:2005

航空航天系列.用锁住方式连接适配器用O型密封圈.测量

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005

气瓶用于将阀门连接到气瓶的平行螺纹 第1部分：规范

Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification

用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第2部分:重型(S系列)柱头螺栓端头的尺寸、设计、试验方法和要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)English version of

液压流体动力和一般用途的连接 带 ISO 261 公制螺纹和 O 形圈密封的端口和螺柱端 第2部分：重型的尺寸、设计、测试方法和要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version...

液压流体动力和一般用途的连接 带 ISO 261 公制螺纹和 O 形圈密封的端口和螺柱端 第3部分：轻型的尺寸、设计、测试方法和要求

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version...

液压流体动力和一般用途的连接 软管接头 第2部分：带有 ISO 8434-1 和 ISO 8434-4 24° 锥形连接器端部、带 O 形圈的软管接头

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)

液压动力系统.O型环.第2部分:一般应用的防护外壳尺寸规格(ISO 3601-2-2008)

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)

流体动力系统 O 形圈 第2部分：一般应用的外壳尺寸

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

航空航天系列 O 形圈凹槽 O 形圈凹槽的设计标准 基本计算（AECMA 技术报告 TR 4271:2000）

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

卡套式管接头技术条件

24°cone connectors.Specification

汽车滤清器橡胶密封件

Rubber seals for automobile filter

通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S 系列)螺栓端头

Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends

通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第3部分:轻型(L 系列)螺栓端头

Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends

液压动力系统.O形密封圈.第4部分:抗挤压密封圈(支撑密封圈)

Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)

用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设计、试验方法和要求

Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs

航空航天系列 带螺纹的锁紧环适配器的60°接口 几何配置

Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration

高压、高温二氧化碳释压对弹性体材料的影响

Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials

M5A2火药驱动起始延迟装置金属装配件再改造

INITIATOR, CARTRIDGE ACTUATED, M5A2 REMANUFACTURED METAL PARTS ASSEMBLY

与Ｏ形环配用的公制螺纹内六角圆筒头轴环接合金属螺塞

Metric screw hexagon socket cylindrical head metal plugs with collar joints for use with O-rings.

O形圈.缺陷的尺寸检查和分类

O rings. Dimensional checking and classification of defects.

O 型圈张力测试计算

O-Ring Tension Testing Calculations

耐流体,耐压缩形变和耐高温的氟烃弹性体橡胶

Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant

橡胶 氟碳弹性体 高温 流体和抗压缩形变（O 型圈 2 级 90 硬度）

Rubber@ Fluorocarbon Elastomer@ High Temperature@ Fluid and Compression Set Resistant (O-Rings@ Class 2@ 90 Hardness)

橡胶、氟碳弹性体、耐高温、耐流体和耐压缩形变

Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant

填料，预制，耐碳氢化合物燃料，“O”形环

PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING

适配器减速器、梁密封件 端口连接、环锁设计、安装和拆卸（稳定版：2026 年 2 月）

Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal of (Stabilized: Feb 2026)

航空航天O型圈尺寸标准

Aerospace Size Standard for O-Rings

AMS 7268材料制O型密封圈模塑预成型包装

Packing, Preformed, O-Ring Molded from AMS 7268 Material

填料 预制 O 型圈由全氟醚 FFO 材料模制而成

PACKING@ PREFORMED@ O-RING MOLDED FROM PERFLUOROETHER@ FFO MATERIAL

由 AMS7287 材料模制而成的 O 型圈

O-RING MOLDED FROM AMS7287 MATERIAL

管件O形环的面密封

Fitting—O-Ring Face Seal

流体动力和一般用途的连接 - 带有 ISO 261 螺纹和 O 型圈密封的端口和螺柱端第 2 部分：重型（S 系列）螺柱端 - 尺寸、设计、测试方法和要求 ISO 6149-2

Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements ISO 6149-2

流体动力和一般用途的连接件 带 ISO 261 公制螺纹和 O 型圈密封的接头和螺柱端 第3部分：轻型（L 系列）螺柱端 尺寸 设计 测试方法 和要求

Connections for Fluid Power and General Use—Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing@ Part 3: Light-Duty (L Series) Stud Ends— Dimensions@ Design@ Test Methods@ and Requirements

连接件 液压动力和通用用途 ISO 261 螺纹和密封圈密封 第2部分：重型（S系列）螺栓端子 尺寸、设计、试验方法及要求

Connectors - Hydraulic power and general purposes - ISO 261 - Threads and sealing rings - Part 2: Heavy duty (S series) bolted terminals - Dimensions, design, test methods and requirements

密封元件 密封圈 工业应用中弹性体材料的适用性

Sealing elements - O-rings - Suitability of elastomeric materials for industrial application

航空航天系列 带锁紧环的螺纹适配器用24度接口 几何结构

Aerospace series - 24 degrees interface for adaptors, threaded, with lockring - Geometric configuration

Aerospace系列 转接头60度接口 带锁环的螺纹连接 几何配置

Aerospace series - 60 degrees interface for adaptors, threaded, with lockring - Geometric configuration

航空航天系列 适配器用密封圈、带锁环的螺纹式 调查

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey

航空航天系列 液压接头 带法兰 直通 由O型圈密封用于厚度为0.8毫米的管子

Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes

液压流体动力和通用连接件 具有ISO 261公制螺纹和O形圈密封的孔口和螺杆端部 第2部分：重载（S系列）螺杆端部的尺寸、设计、试验方法和要求（ISO 6149-2:2006）

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)

液压流体动力和通用连接 具有ISO 261公制螺纹和O型圈密封的插孔和螺杆端部 第3部分：轻载（L系列）螺杆端部的尺寸、设计、试验方法和要求（ISO 6149-3:2006）

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)

通用和流体动力连接件 具有ISO 263英寸螺纹和O形环密封的端口和螺塞端 第3部分：轻型（L系列）螺塞端（等同采用ISO 11926-3:1995）

Connections for general use and fluid power - Ports and stud ends with ISO 263 inch threads and O-ring sealing - Part 3: Light-duty (L series) stud end (ISO 11926-3:1995, IDT)

液压流体动力和一般用途的连接 带有 ISO 261 公制螺纹和 O 形圈密封的端口和螺柱端 第3部分：轻型（L 系列）螺柱端的尺寸、设计、试验方法和要求（ISO 6149-3:2006 IDT）

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006, IDT)

航空航天系列 流体接头 法兰式、直式 用于 0.8mm 厚管的 O 形圈密封

Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes (Endorsed by AENOR in May of 2008.)

一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第3部分：轻型（L 系列）螺柱端，带 O 型环和固定环密封（ G 型和 H 型）（ISO 1179-3:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)

液压流体动力和一般用途的连接 带有 ISO 261 公制螺纹和 O 形环密封的端口和螺柱端 第2部分：重型（S 系列）螺柱端的尺寸、设计、测试方法和要求（ISO 6149-2 :2006）

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)