美利体育登录入口官网

大气等离子体涂层去除及促进化学粘接的一站式精密工艺

One-stop precision process for atmospheric plasma coating removal and chemical bonding promotion

激光清理在焊接和粘接前表面准备的应用

Laser cleaning for surface preparation before welding and bonding

环境试验．试验．T试验导则：焊接

Environmental testing - Tests - Guidance on test T: Soldering

绝缘子表面可湿润性的测量导则

Guidance on the measurement of wettability of insulator surfaces

铜和铜合金管钎焊用液体和软膏状助溶剂的标准规范

Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

测定原油乳化特性、润湿特性和腐蚀抑制特性的标准指南

Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils

手工焊接实践指南

GUIDELINE FOR HAND SOLDERING PRACTICES

饮用水水处理化学品 粒状活性炭 原始颗粒活性炭

Products used for the treatment of water intended for human consumption - Granular activated carbon - Virgin granular activated carbon

表面安装技术.表面安装元件(SMDs)规范的标准方法

Surface mounting technology. Standard method for the specification of surface mounting components (SMDs)

环境测试 试验 试验Tf：使用焊锡膏通过润湿平衡法对用于表面贴装器件（SMD）的电子元件进行可焊性试验

Environmental testing - Tests. Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

环境试验 第2-83部分：试验 试验Tf：采用润湿天平法对表面贴装器件（SMD）用电子元件的可焊性进行测试

Environmental testing – Part 2-83: Tests – Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

油漆和清漆 湿润性 第1部分：术语及一般原则

Paints and varnishes - Wettability - Part 1: Terminology and general principles

油漆和清漆 湿润性 第2部分：通过测量接触角测定固体表面自由表面能

Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle

油漆和清漆.湿润性.第2部分:通过测量接触角测定固体表面自由表面能

Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle

沥青和沥青粘合剂 测定沥青乳液的渗透性（草案）

Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions

饮用水水处理品 粒状活性碳 第1部分：天然粒状活性碳,英文版本DIN EN 12915-1：2009-07

Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon; English version of DIN EN 12915-1:2009-07

用于处理供人类饮用的水的产品 颗粒活性炭 第1部分：原始颗粒活性炭

Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon; German version EN 12915-1:2009

铝及铝合金箔材第4部分：特殊性能要求

Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; German version EN 546-4:2006

基本环境试验.第2部分:试验.试验T指南:锡焊

Environmental testing - Part 2: Tests; guidance on test T: Soldering (IEC 60068-2-44:1995); German version EN 60068-2-44:1995

环境试验. 第2-83部分: 试验. 试验Tf: 利用焊锡膏湿平衡法进行的表面安装美利体育官网首页网址(SMD)电子元件的焊接性试验(IEC 60068-2-83-2011); 德文版本EN 60068-2-83-2011

Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste (IEC 60068-2-83:2011); German version EN 60068-2-83:2011

环境测试 第3-13部分：测试T焊接的支持文件和指南（草案）

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

环境测试.第3-13部分:测试T焊接的支持文件和指南(IEC 60068-3-13-2016);德文版本EN 60068-3-13-2016

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering (IEC 60068-3-13:2016); German version EN 60068-3-13:2016

胶粘剂 润湿性 固体表面接触角和表面自由能测定（草案）

Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface

胶粘剂 润湿性 固体表面接触角和表面自由能测定

Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface

粘合剂.润湿性.通过测量固体表面的接触角和表面自由能测定

Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013

色漆和清漆 润湿性 第1部分：术语和一般原则（ISO 19403-1:2017）

Paints and varnishes - Wettability - Part 1: Terminology and general principles (ISO 19403-1:2017)

油漆和清漆 润湿性 第2部分：通过测量接触角测定固体表面的表面自由能（ISO 19403-2:2017）

Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)

色漆和清漆 润湿性 第3部分：使用悬滴法测定液体的表面张力（ISO 19403-3:2017）

Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method (ISO 19403-3:2017)

油漆和清漆 润湿性 第5部分：通过对固体的接触角测量确定液体表面张力的极性和色散分数，仅对其表面能有色散贡献（ISO 19403-5:2017）

Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)

活性炭的润湿性能要求

Wetting performance requirements of activated carbon

高质硬焊及高温焊接连接用钢、铝合金及其他金属工件的表面处理

Surface treatment of steel, aluminum alloy and other metal workpieces for high-quality brazing and high-temperature welding connections

铝箔试验方法 第5部分：润湿性的美利体育登录入口官网

Test methods for aluminium and aluminium alloy foils—Part 5: Determination of wettability

环境试验. 第2-83部分. 试验. 试验Tf. 利用焊锡膏湿平衡法进行的表面安装美利体育官网首页网址电子元件焊接性试验

Environmental testing. Part 2-83. Tests. Test Tf. Solderability testing of electronic components for surface mounting devices by the wetting balance method using solder paste

环境试验 第2-44部分:试验 试验T指南:锡焊

Environmental testing - Part 2: Tests; Guidance on test T: Soldering

环境试验.第2-58部分:试验.试验Td:表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热的试验方法

Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

环境试验.第2-83部分:测试.测试Tf:利用焊锡膏润湿平衡法进行的表面安装装置(SMD)电子元件的焊接性试验

Environmental Testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

电子组装用附件材料 - 第1-3部分:电子级焊料合金以及用于电子焊接应用的助焊剂和非助焊剂固体焊剂的要求

Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications

表面贴装技术.第3部分:通孔回流(THR)焊接用组件规范的标准方法

Surface mounting technology - Part 3: Standard method for the specification of components for through hole reflow (THR) soldering

印刷电路板可焊性测试标准

IPC J-STD-003D Solderability Tests for Printed Boards

色漆和清漆. 亲水性. 第1部分: 术语和通用原则

Paints and varnishes - Wettability - Part 1: Terminology and general principles

焊接助焊剂试验方法

Soldering flux test methods

用于人类饮用水处理的产品 颗粒活性炭 第1部分：原生颗粒活性炭

Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon

环境试验 第2-83部分：试验 Tf试验 采用焊膏的润湿天平法对表面安装美利体育官网首页网址电子元件的可焊性试验（IEC 60068-2-83:2025）

Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste (IEC 60068-2-83:2025)

预测油田系统内部腐蚀

Predicting Corrosion in Oilfield Systems

腐蚀抑制剂在油水两相流中如何降低腐蚀率并改变表面润湿性

How corrosion inhibitors reduce corrosion rates and change surface wettability in oil-water two-phase flows

油水两相流水润湿预测改进模型

An Improved Model for Water Wetting Prediction in Oil-Water Two-Phase Flow

沥青质在抑制腐蚀和改变钢表面润湿性方面的作用

The Role of Asphaltenes in Inhibiting Corrosion and Altering the Wettability of the Steel Surface

NACE Paper 11330-2011

影响密相二氧化碳中液滴腐蚀的因素

Factors Affecting Droplet Corrosion in Dense Carbon Dioxide

煤的润湿性能测试 接触角法

Coefficient of Wetting Testing by Contact Angle Method

速溶奶粉 分散性和润湿性的测定

Instant dried milk. Determination of the dispersibility and wettability

铝和铝合金 薄片 第4部分：特殊性能要求

Aluminium and aluminium alloys - Foil - Part 4: Special property requirements

涂料和清漆 可湿性 第4部分：从界面张力测定液体表面张力的极性与分散分量（ISO 19403-4:2017）

Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)

铝和铝合金 箔 第4部分：特殊性能要求

Aluminium and aluminium alloys - Foil - Part 4: Special property requirements

电子美利体育官网首页网址连接器 测试和测量 第12-2部分：焊接测试 测试 12b：可焊性、润湿性、烙铁方法

Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

表面安装技术 第3部分：通孔回流(THR)焊接元件规范的标准方法

Surface mounting technology -- Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering (Endorsed by AENOR in September of 2010.)

粘合剂 润湿性 通过测量固体表面的接触角和表面自由能来测定

Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface

产品用于人类饮用水处理 粒状活性碳 第一部分：原粒状活性碳

Products for human drinking water treatment Granular activated carbon Part I: Raw granular activated carbon

环境试验 第3-13部分：试验 T 焊接的支持文件和指南 (IEC 60068-3-13:2016)

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering (IEC 60068-3-13:2016); German version EN 60068-3-13:2016

德国工业协会焊接技术规范

Welding Technology Guidelines of VDI/VDE

与无铅焊料对应的烙铁测试方法

Test method for soldering iron corresponding to lead-free solder