美利体育登录入口官网

轻型冷成型钢板桩标准规范

Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

改进可焊接性、成形性和韧性用低碳和限制硫的高强度低合金结构钢板的标准规范

Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

焊接铸铁指南

Guidelines for Welding Cast Iron

碳和低合金钢可焊性指南

Guide to Weldability Carbon and Low Alloy Steels

道路救护车用病人搬运美利体育官网首页网址.一般担架系统和病人搬运美利体育官网首页网址规格

Patient handling equipment used in road ambulances. Specification for general stretcher systems and patient handling equipment

航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第002部分:均质铝及铝合金组件

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys

航空航天系列.航空航天结构用材料的可焊接性和可钎焊性.非合金和低合金钢制均质组件的焊接和钎焊

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels

航空航天系列.航空航天结构用焊接和钎焊装配组件.电子束焊接金属材料接头.焊接部件质量

Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding. Quality of welded assemblies

环境测试 T. 焊接测试的支持文档和指南

Environmental testing. Supporting documentation and guidance on Test T. Soldering

电阻焊 可焊性 金属材料电阻点焊、缝焊和凸焊可焊性评定的通用要求

Resistance welding. Weldability. General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

电阻焊 可焊性 第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评定的一般要求

Resistance welding – Weldability – Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

结构用铸钢件 第1部分：总则

Steel castings for structural uses - Part 1: General; German and English version prEN 10340-1:2017

结构用铸钢件

Steel castings for structural uses; German version EN 10340:2007 / Note: Applies in conjunction with DIN EN 1559-1 (1997-08), DIN EN 1559-2 (2000-04).*To be replaced by DIN EN 10340-1 (2017-03), DIN EN 10340-2 (2017-03), DIN EN 10340-2 (2019-06).

航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第001部分:一般要求.德文版本和英文版本EN 4632-001-2008

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements; German and English version EN 4632-001:2008

航空航天系列 航空航天结构的焊接和钎焊组件 材料的可焊性和钎焊性 第001部分：一般要求

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements; German and English version EN 4632-001:2008

航空航天系列 航空航天结构用焊接及铜焊组件 材料的可焊接性和可铜焊接性 第006部分：钛合金均匀组件（草案）

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys

航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第006部分:钛合金均匀组件.德文版本EN 4632-006-2013

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys; German version EN 4632-006:2013

航空航天系列-航空航天结构材料的可焊性和钎焊性-第006部分：钛合金均质组件

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys; German version EN 4632-006:2013

航空航天系列.航空航天结构用焊接和钎焊组件.用电子束焊接的金属材料接头.第001部分:焊接组件的质量.德文和英文版本EN 4677-001-2012

Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies; German and English version EN 4677-001:2012

基本环境试验.第2部分:试验.试验T指南:锡焊

Environmental testing - Part 2: Tests; guidance on test T: Soldering (IEC 60068-2-44:1995); German version EN 60068-2-44:1995

环境测试

Environmental testing

环境测试.第3-13部分:测试T焊接的支持文件和指南(IEC 60068-3-13-2016);德文版本EN 60068-3-13-2016

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering (IEC 60068-3-13:2016); German version EN 60068-3-13:2016

特种绕组线规范 第20部分：155级可焊接聚氨酯漆包圆铜线（草案）

Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

特种绕组线规格.第2部分:130级带粘结层的可焊接聚氨酯漆包圆铜线(IEC 60317-2-2012).德文版本EN 60317-2-2012

Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (IEC 60317-2:2012); German version EN 60317-2:2012

焊接.与焊接及相关工艺有关的底漆的试验.第2部分:底漆的焊接性能

Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003); German version EN ISO 17652-2:2003

电阻焊可焊性 第1部分：金属材料电阻点焊、滚缝焊和凸焊可焊性评定的通用要求

Resistance welding – Weldability – Part 1: General requirements for the assessment of the weldability of resistance spot, roll seam and projection welding of metallic materials

电阻焊 可焊性 第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评估的一般要求（ISO 18278-1:2022） 德语版本 EN ISO 18278-1:2022

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022); German version EN ISO 18278-1:2022

电阻焊 可焊性 第 1 部分：金属材料电阻点焊 缝焊和凸焊可焊性评价的一般要求（ISO 18278-1:2022）

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)

电阻焊-可焊性-第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评价的一般要求

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022); German version EN ISO 18278-1:2022

电阻焊 可焊接性 第2部分：电焊可焊接性的评估程序（草案）

Resistance welding weldability Part 2: Procedure for evaluation of electric welding weldability (draft)

电阻焊.可焊性.第2部分:点焊用薄钢板评定用备用程序

Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of sheet steels for spot welding (ISO 18278-2:2004); German version EN ISO 18278-2:2004

焊接性 金属材料 定义

Definition of weldable metal materials

可焊性.金属材料.一般原则

Weldability - Metallic materials - General principles; German version ISO/TR 581:2005

道路车辆制造中的焊接指南

DVS Guideline for Welding in Road Vehicle Construction (DVS 2501 ff.)

德国焊接学会 钢制自行车车架的可焊性与可校直性

German Welding Society - Weldability and Straightening of Steel Bicycle Frames

在役维修焊接规范

In-service maintenance welding specifications

德国焊接协会关于小于3毫米厚度钢材点焊的标准

German Welding Association's standard for spot welding of steel with a thickness of less than 3 mm

电子束焊接材料适用性技术公报 DVS 3204

Technical Bulletin DVS 3204 on the Suitability of Materials for Electron Beam Welding

结构钢制热轧产品.第4部分:热机械轧制可焊细粒结构钢交货技术条件;代替EN 10113-1-1993 和 EN 10113-3-1993

Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

环境试验 第2-44部分:试验 试验T指南:锡焊

Environmental testing - Part 2: Tests; Guidance on test T: Soldering

环境测试第3-13部分:支持文件和测试指导 - 焊接

Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

电气材料、印制板和其他互连结构和组件的测试方法 第 5-2 部分：材料和组件的通用测试方法 印制板组件的助焊剂

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods materials and assemblies - Soldering flux for printed board assemblies

元器件引线 端接 接线片 端子和电线的可焊性测试

Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires

阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定

Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials

一般工程用铸造碳钢

Cast carbon steels for general engineering purposes

可焊性.金属材料.一般原则

Weldability - Metallic materials - General principles

可焊接热轧钢板桩

Weldable hot rolled steel sheet piles

焊接结构用高屈服强度钢板

High yield strength steel plates for welded structure

建筑结构用碳钢管道

Carbon steel tubes for building structure

航空航天系列 航空航天结构用焊接和钎焊组件 材料的焊接性和钎焊性 第001部分：通用要求

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements

航空航天系列 航空航天结构用焊接及钎焊组件 材料的焊接性与钎焊性 第002部分：铝及铝合金均质组件

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys

航空航天系列 航空航天结构材料的可焊性和可钎焊性 第004部分：高合金钢均质组件的焊接和钎焊

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels

滤波器与波导介电谐振器 第2部分：使用指南（IEC 61337-2:2004）

Filters using waveguide type dielectric resonators. Part 2: Guidance for use (IEC 61337-2:2004)

接触焊 可焊性 第1部分：对接触点焊、对接焊和凸焊金属材料的可焊性评估的通用要求（ISO 18278-1:2022）

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)

接触焊 焊接性 第2部分：点焊焊接性评定程序（ISO 18278-2:2016）

Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016)

装甲板 铝合金 7017 可焊接和 7020 贴花

Armor Plate, Aluminum, Alloy 7017 Weldable and 7020 Applique

铝合金装甲板规范

Detail Specification for Aluminum Armor Plate, Alloy 2139 Weldable and Alloy 2195 and 2060 Unweldable Applique

钢筋混凝土用钢 光滑可焊接钢 棒材和冠材

Steels for reinforced concrete - Smooth weldable steels - Bars and crowns

一般工程用开式模锻钢件 第4部分：不锈钢

Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized

电阻焊 可焊性 第1部分: 金属材料电阻点焊、缝焊和凸焊可焊性评定的一般要求

Resistance welding - Weldability - Part 1 : general requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

高频感应部件.非电气特性和测量方法.第2部分:非电气特性的试验方法

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2 : test methods for non-electrical characteristics.

电阻焊可焊性第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评定的一般要求

Resistance welding - Weldability - Part 1: general requirements for the assessment of weldability for resistance spot, seam and bump welding of metallic materials

铝合金 拉制 圆形无缝管 2.5Mg 0.25Cr（5052-0）退火（UNS A95052）

Aluminum Alloy@ Drawn@ Round Seamless Tubing 2.5Mg - 0.25Cr (5052-0) Annealed (UNS A95052)

合金焊丝 耐腐蚀和耐热 低膨胀 42Fe 38Ni 15Co 3.0（Cb + Ta） 1.4Ti 0.92Al 真空熔炼（UNS N19903）

Alloy Welding Wire@ Corrosion and Heat Resistant@ Low Expansion 42Fe - 38Ni - 15Co - 3.0 (Cb + Ta) - 1.4Ti - 0.92Al Vacuum Melted (UNS N19903)

压力用途的扁平钢产品 第3部分：可焊接细晶粒钢 正火

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

压力用钢制扁平产品 第5部分：可焊接细晶粒钢 热机械轧制

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled

航空系列 航空航天结构的焊接和钎焊组件 材料的可焊性和可钎焊性 第一部分：一般要求

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements

航空航天系列 航空航天结构的焊接和熔焊组件 材料的可焊接性和可熔焊性 第002部分：均匀组合铝合金和铝合金

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys

电阻点焊、缝焊和凸焊用金属材料焊接性评价 第1部分：一般要求（ISO 18278-1:2022）

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)

焊接术语 焊接检验

Welding terminology- Welding Inspection

航空航天系列 航空航天结构的焊接和钎焊组件 材料的可焊性和钎焊性 第002部分：均质组件铝和铝合金

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys (Endorsed by AENOR in June of 2008.)

航空航天系列 航空航天结构中材料的可焊性和钎焊性 第004部分：高合金钢均质组件的焊接和钎焊

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels (Endorsed by AENOR in November of 2012.)

环境测试 第2-69部分：测试 测试 Te/Tc：通过润湿平衡（力测量）方法对电子元件和印刷板进行可焊性测试

Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (Endorsed by Asociación Espa?ola de Normalización in April of 2018.)

电阻焊 可焊性 第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评价的一般要求

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)

电阻焊 可焊性 第1部分：金属材料电阻点焊、缝焊和凸焊可焊性评定的一般要求

Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

环境试验 - 第2-69部分：测试 - 测试Te/Tc: 通过浸润天平方法对电子元件和印制板进行焊性测试

Environmental testing — Part 2-69: Tests — Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

技术采购规范 厚膜导体浆料

Technische Liefervorschrift - Leiterpasten fuer Dickschichtschaltungen