美利体育登录入口官网

疲劳荷载混凝土建筑的设计注意事项

Considerations for Design of Concrete Structures Subjected to Fatigue Loading

机械工程构件的分析强度评估

Analytical Strength Assessment of Components in Mechanical Engineering

钢结构．注释（AS 4100-1998的补充）

Steel structures - Commentary (Supplement to AS 4100-1998)

疲劳测试动力传动滚子链

Fatigue Testing Power Transmission Roller Chain

塑料弯曲疲劳特性的标准试验方法

Standard Test Method for Flexural Fatigue Properties of Plastics

实心圆细钢丝的旋转弯曲疲劳试验的标准试验方法

Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

实心圆细钢丝旋转弯曲疲劳试验的标准试验方法

Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

实心圆细钢丝旋转弯曲疲劳试验的标准试验方法

Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

全髋关节置换用髋臼装置疲劳试验的标准试验方法

Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement

产品质量和设计准则对结构完整性的影响

The impact of product quality and design criteria on structural integrity

疲劳性质的统计分析 Ⅱ

Statistical Analysis of Fatigue Properties Ⅱ

轴承钢技术进展：滚动轴承钢及其测试 第8卷

Progress in Bearing Steel Technology: Rolling Bearing Steel and Its Testing Volume 8

长期内部行为

Long-term internal behavior

疲劳

fatigue

疲劳结构与材料1956年参考文献

Fatigue Structures and Materials 1956 References

疲劳测试方法 第5部分：统计应用指南

Methods of Fatigue Testing — Part 5 : Guide to the application of statistics

钢产品的疲劳设计和评估指南

Guide to fatigue design and assessment of steel products

起重机. 通用设计. 轮/轨接触能力的极限状态和检验

Cranes. General design. Limit states and proof of competence of wheel/rail contacts

铁路应用 轮对和转向架 带外轴颈车轴的设计方法

Railway applications. Wheelsets and bogies. Design method for axles with external journals

圆形金属丝和棒材制柱形螺旋弹簧.计算和设计.压缩弹簧

Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs

焊接 钢焊接接头的基本细节 非内部受压元件

Welding. Basic weld joint details in steel. Non internal pressurized components

道路救护车用病人搬运美利体育官网首页网址.一般担架系统和病人搬运美利体育官网首页网址规格

Patient handling equipment used in road ambulances. Specification for general stretcher systems and patient handling equipment

欧洲规范 3：钢结构设计 第1-9部分：疲劳

Eurocode 3 : Design of steel structures – Part 1 - 9 : Fatigue

粘合剂 结构粘合剂拉伸剪切疲劳性能试验方法

Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear

金属材料.疲劳试验.数据的统计规划和分析

Metallic materials - Fatigue testing - Statistical planning and analysis of data

道路车辆. 道路用乘用车车轮. 试验方法

Road vehicles. Passenger car wheels for road use. Test methods

轮椅 第8部分：静态、冲击和疲劳强度的要求和测试方法

Wheelchairs Part 8 : Requirements and test methods for static, impact and fatigue strengths

航空器.液压管接头和连接接头.扭转弯曲试验

Aircraft. Hydraulic tubing joints and fittings. Rotary flexure test

烧结金属材料.烧结指南.第6部分:烧结钢的振动强度

Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels

钢筋 第6部分：合格评定

Reinforcing steel - Part 6: Assessment of conformity / Note: To be replaced by DIN 488-6 (2021-11).

航空航天系列. 900 MPa和1100 MPa强度的MJ螺纹钛合金螺栓. 技术规范

Aerospace series - Bolts, with MJ threads, in titanium alloys, strength class 900 MPa and 1 100 MPa - Technical specification

轴和柄负载能力的计算.补充件1:第1至3部分的实例

Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3

轴与传动件承载能力计算补充2： 第4部分应用实例

Shafts and axles, calculation of load capacity; Supplement 2: Examples to part 4

轴和轮轴负载能力的计算 补充 1：第 1 至 3 部分的示例

Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3

轴和轮轴负载能力的计算 补充 1：第 1 至 3 部分的示例

Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3

轴和车轴负载能力的计算 补充1：第1至3部分的示例

Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3

轴和轮轴负载能力的计算 补充 2：第4部分的示例

Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4

轴和轴负载能力的计算 补充 2：第4部分的示例

Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4

轴和轮轴的负载容量计算 附件1：第一至第三部分的应用实例

Shafts and axles, calculation of load capacity; Supplement 1: Examples to part 1 to 3

轴和传动装置的承载能力计算 补充2： 第4部分的应用示例

Shafts and axles, calculation of load capacity; Supplement 2: Examples to part 4

轴和柄负载能力的计算.第1部分:总论

Calculation of load capacity of shafts and axles - Part 1: General

轴和车轴负载能力的计算 第1部分：概述

Calculation of load capacity of shafts and axles - Part 1: General

轴和柄负载能力的计算.第2部分:理论应力集中因子和疲劳缺口因子

Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors

轴和车轴承载能力的计算第2部分：理论应力集中系数和疲劳缺口系数

Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors

螺纹紧固件 轴向负荷疲劳试验 试验方法和试验结果评定

Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results

轨道车辆结构钢焊接接头的设计和持久强度分析

Design and endurance strength analysis of steel welded joints in rail-vehicle construction

起重机.通用设计.第3-2部分:滑轮组中钢索性能的极限状态和检验.德文版本EN 13001-3-2-2014

Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version EN 13001-3-2:2014

起重机 通用设计 第 3-5 部分：锻造和铸造吊钩的极限状态和能力证明（草案）

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

起重机 一般设计 第 3-5 部分：锻造吊钩的极限状态和能力证明

Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks; German and English version EN 13001-3-5:2016/prA1:2017

铁路应用设施.轮副和转向架.主动轴.设计方法.德文版本EN 13104-2009+A2-2012

Railway applications - Wheelsets and bogies - Powered axles - Design method; German version EN 13104:2009+A2:2012

博览会和露天游艺场机械和建筑物 安全（草案）

Fairground and amusement park machinery and structures - Safety

集中供暖用预绝缘粘结管系统的设计和安装

Design and installation of preinsulated bonded pipe systems for district heating

用于流体动力应用的气体加载蓄能器

Gas-loaded accumulators for fluid power applications

巴拿纳应用 铁路车辆结构疲劳强度评估

Fatigue Strength Assessment of Railway Vehicle Structures in Banana

铁路应用 轨道车辆结构强度评估 第3部分：基于累积损伤的疲劳强度评估（草案）

Railway applications - Strength assessment of rail vehicle structures - Part 3: Fatigue strength assessment based on cumulative damage

Eurocode 3: 设计钢结构-第6部分：起重机支撑结构 国家附录

Eurocode 3: Design of steel structures - Part 6: Crane supporting structures National Annex

欧洲规范 3：钢结构的设计和施工 第6部分：起重机跑道

Eurocode 3: Design and construction of steel structures – Part 6: Crane runways

国家附录.国家制定参数.欧洲法规3:钢结构设计.第6部分:起重机支承结构

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 6: Crane supporting structures

国家附录 国家确定的参数 欧洲规范 3：钢结构设计 第6部分：起重机支撑结构

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 6: Crane supporting structures

国家附录 国家确定的参数 欧洲规范 3：钢结构设计 第6部分：起重机支撑结构

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 6: Crane supporting structures / Note: Applies in conjunction with DIN EN 1993-6 (2010-12).

欧洲规范9:铝结构设计 第1-3部分：易疲劳结构

Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue

移动提升工作平台 设计计算 稳定性准则 制造 安全 检查和试验

Mobile lifting work platforms design calculation stability criteria manufacturing safety inspection and testing

热塑性塑料阀.疲劳强度.试验方法(ISO 8659-88)

Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990

航空航天系列.8°30'压力28000 kPa的管道联接器.适配器.米制系列.技术规范

Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006

半导体器件.微电机器件.第12部分:使用MEMS结构共振的薄膜材料的弯曲疲劳测试方法(IEC 62047-12-2011).德文版本EN 62047-12-2011

Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures (IEC 62047-12:2011); German version EN 62047-12:2011

修复术.假下肢的结构试验.要求和试验方法

Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2006); English version of DIN EN ISO 10328:2007-04

假肢-下肢假肢的结构测试-要求和测试方法

Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016); German version EN ISO 10328:2016

鞋类 勾心测试方法 抗疲劳性

Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006); German version EN ISO 18895:2018

鞋类 鞋跟测试方法 抗疲劳性

Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004); German version EN ISO 19956:2004

热塑性塑料阀门 疲劳强度 测试方法

Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020

粘合剂.拉伸剪切结构粘合剂疲劳性能的试验方法 (ISO 9664:1993); 德文版本 EN ISO 9664:1995

Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993); German version EN ISO 9664:1995

关节轴承.轴承疲劳强度.第4部分:金属复合层轴承材料的轴承品的试验

Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)

滑动轴承 轴承疲劳 第4部分：金属多层轴承材料半轴承的测试

Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)

铁路应用 软轴的结构要求

Structural requirements for flexible shafts for railway applications

计算往复式内燃机曲轴

Calculation of crankshaft of reciprocating internal combustion engine

海底应用中的电气动力电缆

Electrical power cables in subsea applications

拱形铝合金焊接构造设计和疲劳评估指南

Guide to Design and Fatigue Assessment of Arched Aluminum Alloy Welded Structures

铝合金车体焊缝结构设计及强度评定规范

Guideline DVS 1608-1: Design and strength assessment of welding structures made from aluminum alloys in railway vehicle construction

DVS 沉积焊缝的设计和持久强度评估

Design and endurance strength assessment of DVS deposition welds

设计与疲劳强度分析的钢焊接接头在铁路车辆构建中的应用

Design and fatigue strength analysis of steel welded joints in railway vehicle construction

德国焊接学会 轨道交通用钢焊缝设计与持久强度评估指南

German Welding Society Guidelines for Design and Endurance Strength Assessment of Rail Transit Steel Welds

DIN EN 15085-3 钢铁在铁路车辆制造中的焊接连接的设计与持久性评估

DIN EN 15085-3 Design and durability assessment of welded connections of steel in railway vehicle construction

电阻点焊焊接件疲劳试验用样品

Resistant Point-Welded Specimens for Fatigue Strength Determination

船舶装备件的营运强度设计

Design of Equipment Elements for Shipbuilding to Operative Strength

可重配置无线系统(RRS).构建和利用运营商内部场景的无线环境地图(REM)的用例 版本1.1.1

Reconfigurable Radio Systems (RRS); Use Cases for building and exploitation of Radio Environment Maps (REMs) for intra-operator scenarios (V1.1.1)

机械工程构件的分析强度评估指南

ANALYTICAL STRENGTH ASSESSMENT OF COMPONENTS IN MECHANICAL ENGINEERING

锥齿轮承载能力计算方法 第2部分:齿面接触疲劳(点蚀)强度计算

Calculation of load capacity of bevel gear--Part 2:Calculation of surface durability(pitting)

滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度

Plain bearings--Bearing fatigue--Plain bearings in test rigs and in application under conditions of hydrodynamic lubrication

内燃机 连杆 技术条件

Internal combustion engines—Connecting-rods—Specification

金属材料.疲劳试验.数据统计方案与分析方法

Metallic materials.Fatigue testing.Statistical planning and analysis of data

离心机转鼓强度计算规范

Standard of strength calculation for centrifugal drum

水面舰艇结构设计计算方法

Surface ship structure design calculation method

起重起重机 金属结构 承重能力确认

Cranes. Metal structures. Proof of competence

汽车发动机.阀簧.技术要求和测试方法

Automobile engines. Valve springs. Technical requirements and test methods

金属和合金的腐蚀-腐蚀疲劳试验-第1部分：失效循环试验

Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing

外科植入物.丙烯酸树脂粘接剂.矫形外科用丙烯酸树脂粘接剂的弯曲疲劳测试

Implants for surgery - Acrylic resin cement - Flexural fatigue testing of acrylic resin cements used in orthopaedics

起重机和提升机 钢丝绳、卷筒和滑轮的选择

Cranes and hoists - Selection of wire ropes, drums and sheaves

起重机 车轮/轨道接触及相关小车轨道支撑结构的设计计算 第1部分：总则

Cranes - Design calculation for wheel/rail contacts and associated trolley track supporting structure - Part 1: General

起重机.钢结构特性检验

Cranes — Proof of competence of steel structures

起重机应用中液压缸能力的证明

Proof of competence of hydraulic cylinders in crane applications

弹簧.词汇

Springs - Vocabulary

弹簧 喷丸 第 1 部分：一般程序

Springs — Shot peening — Part 1: General procedures

轮椅 第8部分:静态强度、冲击强度和疲劳强度的要求和试验方法

Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths

航空器 液压管接头和连接接头扭转弯曲试验

Aircraft - Hydraulic tubing joints and fittings - Rotary flexure test

胶粘剂.结构胶粘剂拉伸剪切疲劳性能的试验方法

Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear

柴油机气缸体疲劳试验方法

Diesel engine cylinder block fatigue test method

液压件圆柱螺旋压缩弹簧 技术条件

Hydranlic cylindrically helical compression spring.Technical specifications

仪表材料术语.弹性材料

Instrument material terminology - Elastic material

内部扭力螺栓规格

Internal torque bolt specifications

金属制品.疲劳试验.数据统计处理

Metal products - Fatigue testing - Data statistical processing

与疲劳强度相关的焊接质量指南

Guidelines on weld quality in relationship to fatigue strength

铁路应用 基于累积损伤的铁路车辆结构疲劳强度评估

Railway Applications - Fatigue strength assessment of railway vehicle structures based on cumulative damage

轮轨车辆结构疲劳强度评估 第3部分：基于累积损伤的疲劳强度评估

Railway applications - Strength assessment of rail vehicle structures - Part 3: Fatigue strength assessment based on cumulative damage

汽车行车制动器疲劳强度技术要求及台架试验方法

Technical Requirements and Test Bench Methods for Fatigue Strength of Automotive Service Brakes

钛合金管材 无缝 液压 3Al 2.5V 受控收缩应变比冷加工 应力消除（UNS R56320）

Titanium Alloy Tubing@ Seamless@ Hydraulic 3Al - 2.5V@ Controlled Contractile Strain Ratio Cold Worked@ Stress Relieved (UNS R56320)

UNS N07718拉力强度185 ksi额定疲劳度镍合金螺栓和螺丝采购规范

Bolts and Screws, Nickel Alloy, UNS N07718, Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification

钢的选定和使用

Selection and Use of Steels

液压油管 合格测试要求

Hydraulic Tubing - Qualification Test Requirements

焊接质量与疲劳强度关系指南（ISO/TS 20273:2017）

Guidelines on weld quality in relationship to fatigue strength (ISO/TS 20273:2017)

道路车辆 牵引车和拖车的机械联轴器 强度要求和强度试验

Road vehicles - Mechanical couplings for towing vehicles and trailers - Strength requirement and strength testing

起重机 总体设计.3-5部分：锻造和铸造吊钩的极限状态和能力证明

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

区域供热预绝缘粘合管道系统的设计和安装

Design and installation of preinsulated bonded pipe systems for district heating

设计和安装预制保冷管道系统（用于区域供暖）

Design and installation of preinsulated bonded pipe systems for district heating

热塑性阀 疲劳强度 试验方法（ISO 8659:2020）

Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)

粘合剂 结构胶粘剂拉伸剪切疲劳性能的试验方法（ISO 9664:1993）

Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993)

金属材料 疲劳试验 数据的统计规划与分析（ISO 12107:2012 等同采用）

Metallic materials - Fatigue testing - Statistical planning and analysis of data (ISO 12107:2012, IDT)

滩海混凝土平台结构设计与建造技术规范

Technical specification of structure design and construction for concrete platform in beach-shallow sea