美利体育登录入口官网

焊接材料 高强度钢手工电弧焊用药皮焊条 分类

Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification

焊接材料 高强度钢气体保护和非气体保护金属极电弧焊用管状药芯焊条 分类

Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification

焊接耗材 高强度钢气体保护和非气体保护金属电弧焊用管状药芯焊条 分类

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification

中温和低温压力容器用高强度碳素钢板的标准规格

Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

飞机维修化学品对低脆锌镍板腐蚀的标准试验方法

Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals

焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极,焊丝,焊条和沉积金属.分类

Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification

高强度钢构件氢致脆断的预防 原理与措施

Prevention of hydrogen assisted brittle fracture of high-strength steel components - Fundamentals and measures

航空航天系列超高强度钢和镍钴合金螺栓，标称抗拉强度 1800 MPa 技术规范

Aerospace series - Bolts in ultra high strength steels and Ni-Co-based alloys, nominal tensile strength 1800 MPa - Technical specification

焊接消耗品 高强度钢手工金属弧焊用涂药焊条 分类（草案）

Welding consumables Classification of chemically coated electrodes for manual metal arc welding of high-strength steels (draft)

焊接耗材 - 高强度钢气体保护和非气体保护金属电弧焊用管状药芯焊条 - 分类（ISO/DIS 18276:2023）

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO/DIS 18276:2023); German and English version prEN ISO 18276:2023 / Note: Date of issue 2023-05-26*Intend...

金属覆盖层 低氢脆镉钛电镀层

Metallic coating.Cd-Ti plating of low hydrogan embrittlement

金属和其它无机覆盖层 为减少氢脆危险的钢铁预处理

Metallic and other inorganic coatings.Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement

高强度钢强力旋压 工艺规范

Power spinning of high-strength steel—Technological specification

高强度钢氢致延迟断裂评价方法

Evaluation method for hydrogen-induced delayed fracture of high strength steels

结构级和高强度钢的热轧双辊铸轧铸钢板

Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel

焊接耗材 高强度钢气体保护电弧焊用焊丝、焊丝、焊条和焊料 分类

Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification

焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification

焊接耗材 高强度钢气体保护和非气体保护金属电弧焊用管状药芯焊条 分类

Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification

高强度钢结构部件氢致脆断的预防 第1部分：基本原理与措施

Prevention of hydrogen assisted brittle fracture of high-strength steel components — Part 1: Fundamentals and measures

高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材.修改件1

High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition; Amendment 1

紧固件.钢紧固件氢脆的基本原理

Fasteners — Fundamentals of hydrogen embrittlement in steel fasteners

电阻点焊的检验和验收方法

Method of inspection and acceptance levels for resistance spot welds

镀铬、低脆性、电沉积

Chromium Plating, Low Embrittlement, Electrodeposition

无机涂层的电化学剥离

Electro-Chemical Stripping of Inorganic Finishes

低脆性铬电镀工艺标准

Chromium Plating, Low Embrittlement, Electrodeposition

起落架减震支柱热损坏

Landing Gear Shock Strut Heat Damage

钢铁的磷化处理

Phosphate Treatment of Iron and Steel

规定最大抗拉强度超过1450MPa钢件的预处理与防护

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa

电镀 锌

Plating, Zinc

电镀，镉钛

Plating, Cadmium-Titanium

超音速火焰喷涂碳化钨涂层在高强度钢上的磨削

Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels

热处理至180ksi或以上的钢零件的低应力磨削，以及热处理至180ksi或以上的钢零件镀铬的低应力磨削

Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over

钢的选定和使用

Selection and Use of Steels

焊接消耗品 高强度钢气体保护电弧焊用焊丝、线材、棒材和沉积层的分类（ISO 16834:2012）

Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)

焊接耗材 高强度钢手工金属电弧焊用覆盖焊条 分类（ISO 18275:2011）

Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)

焊接用填充材料 带有或不带保护气体的电弧焊用空心电极丝 用于高强度钢焊接 分类

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification