美利体育登录入口官网

流变测试方法 基础与实验室间比较 第1部分：屈服点的测定（ISO/TR 20659-1:2024）（2024年12月由西班牙标准化协会采纳 ）

Rheological test methods - Fundamentals and interlaboratory comparisons - Part 1: Determination of the yield point (ISO/TR 20659-1:2024) (Endorsed by Asociación Espa?ola de Normalización in December 2024.)

现场测试油基钻井液的推荐做法（第五版；ERTA 1：2014年8月）

Recommended Practice for Field Testing Oil-based Drilling Fluids (FIFTH EDITION; ERTA 1: AUGUST 2014)

油井钻井液流变学与水力学（第六版）

Rheology and Hydraulics of Oil-well Drilling Fluids (Sixth Edition)

通过压缩载荷（Wood-to-Wood）在静态剪切中粘合剂的蠕变和失效时间的标准测试方法

Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

发动机油在低温下表观粘度和弯曲应力测定的试验方法

Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

海洋防污涂料在天然海水中生物污垢和流体剪切力的标准测试方法

Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

用螺旋挤出毛细管流变仪测量热塑性材料性能的标准试验方法

Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

土工织物试验方法 第8部分：直接剪切法测定沙-土工织物摩擦性能

Methods of test for Geotextiles — Part 8 : Determination of sand - geotextile frictional behaviour by direct shear

沥青和沥青粘合剂.使用旋轴仪测定沥青粘合剂的动态黏度

Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus

沥青和沥青粘合剂.沥青乳剂、稀释沥青或助溶沥青粘合剂.旋转轴粘度计法

Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle viscometer method

航空航天系列.非金属材料.结构胶粘剂.试验方法.剪切应力和剪切应变量的测定

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain

胶粘剂.用块状剪切法测定硬质衬底间胶粘剂黏合的剪切强度

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

纤维增强塑料复合材料 使用剪切框架测定面内剪切应力/剪切应变响应和剪切模量的剪切试验方法

Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus

印刷技术 落棒式粘度计测定糊状油墨和载色剂的流变性能

Graphic technology — Determination of rheological properties of paste inks and vehicles by the falling rod viscometer

金属材料 扭矩控制疲劳测试

Metallic materials. Torque-controlled fatigue testing

流变试验方法 基础和实验室间比对 第1部分：屈服点的测定（ISO/TR 20659-1:2024）

Rheological test methods – Fundamentals and interlaboratory comparisons – Part 1: Determination of the yield point (ISO/TR 20659-1:2024)

流变试验方法 基础和实验室间比对 第1部分：屈服点的测定

Rheological test methods – Fundamentals and interlaboratory comparisons – Part 1: Determination of the yield point

粘度 第1部分：流变概念

Viscosity - Part 1: Rheological concepts

结构胶粘剂. 采用振荡流变测量法测定粘弹性胶粘剂流动性和应用表现

Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry

航空航天.纤维增强塑料.单向层压制品试验.拉伸剪切强度和剪切模数测定

Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension

沥青和沥青粘合剂. 用锥板法测定沥青和沥青粘合剂的动态粘度; 德文版EN 13702：2018

Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method; German version EN 13702:2018

胶粘剂.用块剪切法测定硬衬底间胶粘剂的剪切强度

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) English version of DIN EN ISO 13445:2006-09

粘合剂 通过块剪切法测定刚性基材之间粘合粘合的剪切强度

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003); German version EN ISO 13445:2006

流变学 第2部分：旋转和振荡流变测量的一般原理（草案）

Rheology Part 2: General principles of rotational and oscillatory rheological measurements (draft)

橡胶, 硫化及热塑性产品 剪切系数及对刚性板的附着性 四倍剪切法

Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods

金属材料 扭矩控制疲劳试验方法

Metallic materials—Torque-controlled fatigue testing

无疵小试样木材物理力学性质试验方法 第16部分：顺纹抗剪强度测定

Test methods for physical and mechanical properties of small clear wood specimens—Part 16: Method of testing in shearing strength parallel to grain of wood

印刷技术 用落棒式粘度计测定浆状油墨和连接料的流变性

Graphic technology.Determination of rheological properties of paste inks and vehicles by the falling rod viscometer

塑料 用毛细管和狭缝口模流变仪测定 塑料的流动性

Plastics.Determination of the fluidity of plastics using capillary and slit-die rheometers

原油流变性测定方法

Crude Oil Rheological Measurement Method

纺织搭扣.在长度及宽度方向上的剪切强度的测定

Textile fastener. Method for determination of longitudinal and transverse shearing strength

聚合物复合材料. 夹层芯材剪切性能的测定方法

Polymer composites. Method for determination of shear properties of sandwich core materials

胶粘剂.结构胶粘剂拉伸剪切疲劳性能的试验方法

Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear

血液黏度计校准规范

Calibration Specification for Blood Viscometers

沥青与沥青结合料 旋转 spindle 法测定沥青结合料动力粘度

Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus

沥青和沥青结合料 锥板法测定沥青和沥青结合料动态粘度

Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method

航空与航天 非金属 结构胶 测试方法 第6部分：剪切应力与剪切变形的测定

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

高性能批次处理防腐剂开发

High Performance Batch Processing Preservative Development

低剂量焊缝腐蚀抑制剂

Low dose weld corrosion inhibitor

评估钻杆腐蚀抗坑蚀性能的剪切应力影响

Effect of shear stress on evaluating the corrosion resistance of drill pipe

流变测试方法 基础知识和实验室间比较 屈服点的测定

Rheological test methods. Fundamentals and interlaboratory comparisons. Determination of the yield point

流变试验方法 基础理论和实验室间比对 第1部分：屈服点的测定

Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point (ISO/TR 20659-1:2024, IDT)

航空航天系列 非金属材料 结构粘接剂 试验方法 第6部分：切应力和切应变的测定

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

流变学 第2部分：旋转和振荡流变仪的一般原理 (ISO 3219-2:2021)

Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

粘合剂 通过块剪切法测定刚性基材之间粘合剂的剪切强度

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method?

钻井液流变学与水力学计算程序推荐作法

Recommended practice on the rheology and hydraulics of oil-well drilling fluids

流变测试方法 基础知识和实验室间比较 第1部分：屈服点的测定 (ISO/TR 20659-1:2024)（由西班牙标准化协会于 2024 年 12 月批准 ）

Rheological test methods - Fundamentals and interlaboratory comparisons - Part 1: Determination of the yield point (ISO/TR 20659-1:2024) (Endorsed by Asociación Espa?ola de Normalización in December of 2024.)

塑料 液态或乳液或分散体形式的聚合物/树脂 使用具有定义剪切率的旋转粘度计测定粘度 （ISO 3219:1993）

PLASTICS. POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS. DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOSIMETER WITH DEFINED SHEAR RATE. (ISO 3219:1993).