美利体育登录入口官网

辐射防护 封闭源 泄漏测试方法（ISO 9978:2020）（2023年2月由西班牙标准化协会认可 ）

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020) (Endorsed by Asociación Espa?ola de Normalización in February 2023.)

紧固件密封试验方法

Fastener Sealing Test Methods

保健品无菌加工 第3部分：冻干

Aseptic processing of health care products — Part 3: Lyophilization

附录c 减少制冷和空调美利体育官网首页网址及系统中卤化制冷剂的释放

ANSI/ASHRAE Addendum c to ANSI/ASHRAE Standard 147-2019 Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems

TP-78C 电连接器空腔漏电粘合完整性测试程序

TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors

手动和自动开关阀外部泄漏评估的标准方法

Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves

实验室玻璃器皿．可互换球形磨口玻璃接头

Laboratory glassware - Interchangeable spherical ground glass joints

完整满装运输包装．试验方法．密封试验

Complete, filled transport packages - Methods of test - Leakage test

职业防护手套第 10.2 部分：防化学品和微生物的防护手套-耐穿透性的测定

Occupational protective gloves Part 10.2: Protective gloves against chemicals and micro-organisms- Determination of resistance to penetration

管道-气体和液体石油-现场压力测试

Pipelines - Gases and Liquid Petroleum - Field Pressure Testing

减少制冷和空调美利体育官网首页网址和系统中卤化制冷剂排放的指南

Guideline to Reducing Emission of Halogenated Refrigerants in Refrigeration and Air-Conditioning Equipment and Systems

使用负气压(真空)和正气压的混凝土排污管的标准试验方法

Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

用真空法进行空瓶罐泄漏试验的标准试验方法

Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

通过真空法测试空硬质容器的泄漏情况的标准试验方法

Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

用真空法进行空刚性容器泄漏测试的标准试验方法

Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

医用手套孔美利体育登录入口官网的标准试验方法

Standard Test Method for Detection of Holes in Medical Gloves

螺纹紧固件用胶粘剂流体密封性的标准试验方法

Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

对联合国(UN)包装进行内压试验的标准指南

Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

氨比色泄漏试验的标准实施规程

Standard Practice for Ammonia Colorimetric Leak Testing

术语 与泄漏测试相关

Terminology Related to Leak Testing

飞机氧气系统和美利体育官网首页网址 第3部分：美利体育官网首页网址和系统的测试

Aircraft oxygen systems and equipment — Part 3 : Testing of equipment and systems

无损检验.渗漏试验.变压法

Non-destructive testing - Leak testing - Pressure change method

无损美利体育登录入口官网术语 第8部分：密封性测试中使用的术语

Non - destructive testing — Terminology — Part 8 : Terms used in leak tightness testing

保健品的无菌加工.冷冻干燥

Aseptic processing of health care products. Lyophilization

工业阀门 无组织排放的测量、测试和鉴定程序 阀门生产验收试验

Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Production acceptance test of valves

耐危险化学品和微生物的防护手套. 微生物风险的术语和性能要求

Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks

医疗应用中液体和气体的小管径连接器 常用测试方法

Small-bore connectors for liquids and gases in healthcare applications - Common test methods

内窥镜.医用内窥镜和内疗器件.耐水型医用内窥镜用基本要求

Endoscopes. Medical endoscopes and endotherapy devices. Basic requirements for medical endoscopes of water-resistant type

辐射防护 密封源 泄漏测试方法（ISO 9978:2020）

Radiation protection – Sealed sources – Leakage test methods (ISO 9978:2020)

辐射防护 密封源 泄漏测试方法

Radiation protection – Sealed sources – Leakage test methods

包装测试 柔性包装的泄漏试验 第3部分：压力下降方法

Package testing - Leakage test for flexible packages - Part 3: Pressure drop method

燃油软管 功能要求

Fuel hose pipes - Functional requirements

塑料管道系统.聚乙烯(PE)管.耐温度循环试验方法

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling; German version EN 12119:1997

无损美利体育登录入口官网.渗漏试验.压力改变方法

Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001

无损美利体育登录入口官网 泄漏测试 压力变化法

Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001

无损检验.泄漏试验.气体泄漏测量用仪表选择指南; 德文版本 EN 13625:2001

Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001

建筑物通风-空气末端装置-风门和阀门的空气动力测试

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves; German version EN 1751:2014 / Note: To be replaced by DIN EN 1751 (2023-02).

耐化学腐蚀和微生物的防护手套.第2部分:耐渗透性的测定

Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration; German version EN 374-2:2003

登山装备.附件绳.安全要求和测试方法

Mountaineering equipment - Accessory cord - Safety requirements and test methods; German version EN 564:2014 / Note: DIN EN 564 (2007-03) remains valid alongside this standard until 2015-06-30.*To be replaced by DIN EN 564 (2022-02).

放射性物质的安全运输 包装泄漏测试（ISO 12807:2018）

Safe transport of radioactive materials - Leakage testing on packages (ISO 12807:2018); German and English version prEN ISO 12807:2020

医疗保健产品的无菌加工.第3部分:冻干法(ISO 13408-3-2006);德文版本EN ISO 13408-3-2011

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006); German version EN ISO 13408-3:2011

保健品的无菌加工-第3部分：冻干

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006); German version EN ISO 13408-3:2011

无损美利体育登录入口官网-泄漏美利体育登录入口官网-示踪气体法（ISO 20485:2017）

Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)

去除空气中颗粒物的高效过滤器和过滤介质-第4部分：确定过滤元件泄漏的试验方法-扫描法（ISO 29463-4:2011）

High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements - Scan method (ISO 29463-4:2011); German and English version prEN ISO 29463-4:2018

医疗保健应用中用于液体和气体的小口径连接器 第20部分：通用测试方法（ISO 80369-20:2024）

Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2024)

辐射防护 密封源 泄漏试验方法 (ISO 9978:2020)

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020); German version EN ISO 9978:2022

草案 辐射防护 密封源 泄漏测试方法 (ISO 9978:2020)

Draft Document - Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020); German version prEN ISO 9978:2022

辐射防护 封闭源 泄漏测试方法 (ISO 9978:2020) 德文版本 EN ISO 9978:2022

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020); German version EN ISO 9978:2022

液压流体动力 汽缸 验收试验

Hydraulik fluid power - Cylinders - Acceptance tests

液压流体动力 油缸 验收测试 (ISO 10100:2020)

Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)

液压流体动力 - 油缸 - 验收测试 (ISO 10100:2020)

Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)

内镜自动清洗消毒机卫生要求

Hygienic requirements for washer-disinfectors employing chemical disinfection for thermolabile endoscopes

放射性核素电离辐射密封源.泄露测试方法

Radionuclide ionizing radiation sealed sources. Leakage test methods

保健品无菌加工.第3部分:冷冻干燥

Aseptic processing of health care products. Part 3. Lyophilization

健康护理产品的无菌操作.第6部分:隔离系统

Aseptic processing of health care products. Part 6. Isolator systems

防化学和微生物手套 第2部分：抗渗透性测定

Protective gloves against chemicals and microorganisms. Part 2 - Determination of resistance to penetration.

气动液压缸最终检验和验收标准

Pneumatic fluid power - Cylinders - Final examination and acceptance criteria

液压传动 液压缸 验收试验

Hydraulic fluid power - Cylinders - Acceptance tests

液压油动力缸 - 验收测试

Hydraulic fluid power — Cylinders — Acceptance tests

道路车辆 - 液化天然气（Lng）燃油系统组件 - 第2部分:性能和一般测试方法

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods

放射性物质安全运输包装的泄漏检验

Safe transport of radioactive materials - Leakage testing on packages

地下非压力应用热塑性塑料管道系统.弹性密封环式接头密封性的试验方法

Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints

卫生保健产品的无菌工艺.第3部分:冻干法

Aseptic processing of health care products - Part 3: Lyophilization

制冷系统和热泵.元件和接头紧密性限制条件

Refrigerating systems and heat pumps - Qualification of tightness of components and joints

工业阀.漏气的测量、试验和鉴定程序.第1部分:阀门定型试验的分类系统和鉴定程序

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves

工业用阀.泄漏的测量、试验和鉴定程序.第2部分:阀门产品验收试验

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves

垫圈-消毒器具.第4部分:不耐热的内诊镜使用化学消毒的垫圈-消毒器具的要求和试验

Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes

呼吸保护装置 - 测试和测试美利体育官网首页网址的方法 - 第1部分:向内泄漏的测定

Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage

聚乙烯(PE)压力管材和管件间的装配接头 弯曲时承受内压的密封试验

Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

防火试验.防烟门和卷帘组件.第1部分:室温和环境温度漏气试验.修改件1

Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests; Amendment 1

医用输液器械.第4部分:一次性使用,重力给水的输液器.修改件1

Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed; Amendment 1

呼吸防护装置.性能要求.第8部分:特殊应用化学、生物、放射性和核（CBRN）过滤和放射性核（RN）过滤RPD

Respiratory protective devices — Performance requirements — Part 8: Special application chemical, biological, radiological and nuclear (CBRN) filtering and radiological-nuclear (RN) filtering RPD

无损美利体育登录入口官网.测漏试验方法选择

Non-destructive testing -- Selection of leak testing method

建筑物通风 矩形截面金属风管 强度和泄漏要求

Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage

邻近试验 密封性试验 方法与测量工具选择标准

Non-destructive testing - Leak testing - Criteria for method and technique selection

消毒清洗器 第4部分：用于对热敏性内镜进行化学消毒的消毒清洗器的要求和试验（ISO 15883-4:2018）

Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2018)

防护手套抵御危险化学品和微生物 第2部分：抗渗透性测定 (ISO 374-2:2019)

Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)

医疗保健领域中用于流体和气体的小内径连接器 第20部分：通用试验方法（ISO 80369?20:2024）

Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369?20:2024)

辐射安全 密闭源 泄漏测试方法 (ISO 9978:2020)

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020)

医疗保健应用中用于液体和气体的小口径连接器 第20部分：通用测试方法

Small-bore connectors for liquids and gases in healthcare applications - Part 20 : Common test methods

辐射防护.密封源.泄漏测试方法

Radiation Protection - Sealed Sources - Leak Test Methods

辐射防护 密封源 泄漏试验方法

Radiation protection - Sealed sources - Leakage test methods

管道系统检查和泄漏测试指南

Piping Examination and Leak Testing Guide - B31.8 Pipelines

过程行业管道检验和泄露试验指南

Piping Examination and Leak Test Guide

工艺行业规程 PNSC0021 泄漏测试

Leak Testing of Piping Systems

汽车和工业热交换器的热循环耐久性实验室测试

Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability

液体油料和蒸汽/排放系统快速接头的规格

Quick Connector Specification for Liquid Fuel and Vapor/Emissions Systems

燃料系统管道组件的性能要求

Performance Requirements for Fuel System Tubing Assemblies

增压空气冷却器泄漏

Charge Air Cooler Leakage

推进电池组液体泄漏密封标准推荐做法

Liquid Leak Tightness Standards for Propulsion Battery Packs Recommended Practice

推进电池组液体泄漏密封性标准推荐实施规程

Liquid Leak Tightness Standards for Propulsion Battery Packs Recommended Practice

无损美利体育登录入口官网 泄漏美利体育登录入口官网 压力变化法

Non-destructive testing - Leak testing - Pressure change method

地下非压力应用的热塑性管道系统 弹性密封环类型接头的密封性试验方法（ISO 13259:2020）

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

医疗产品无菌加工 第3部分：冻干（ISO 13408-3:2006）

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006)

非破坏性美利体育登录入口官网 泄漏测试 术语（ISO 20484:2017）

Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017)

放射防护 密封放射源 通用要求和分类（ISO 2919:2012）

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

医疗保健应用中用于液体和气体的小口径连接器 第20部分：通用测试方法

Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods (ISO 80369?20:2024, IDT)

辐射防护 密封源 泄漏试验方法（ISO 9978:2020）

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020)

道路车辆 压缩天然气(CNG)加气系统 第2部分：试验方法（等同采用ISO 15501-2:2016）

Road vehicles - Compressed natural gas (CNG) fuelling systems - Part 2: Test methods (ISO 15501-2:2016, IDT)

高效过滤器和过滤介质去除空气中的颗粒物 第4部分：确定过滤元件泄漏的试验方法 扫描法(ISO 29463-4:2011,IDT)

High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements - Scan method (ISO 29463-4:2011, IDT)

辐射防护 密封源 泄漏试验方法

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020, IDT)

用于装饰和排水目的的防火服务切断阀

SHUTOFF VALVES FOR TRIM AND DRAIN PURPOSES FOR FIRE PROTECTION SERVICE

非破坏性测试 铅测试 气体泄漏测量仪表选择指南

Non-destructive testing. Lead test. Guide to the selection of instrumentation for the measurement of gas leakage.

非破坏性测试 泄漏测试 方法和技术选择标准

NON-DESTRUCTIVE TESTING. LEAK TESTING. CRITERIA FOR METHOD AND TECHNIQUE SELECTION.

辐射防护 密封放射源 一般要求和分类（ISO 2919:2012）

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

医疗保健应用中液体和气体用小口径连接器 第20部分：通用测试方法 (ISO 80369-20:2024) (2025 年 1 月获得西班牙标准化协会认可 )

Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2024) (Endorsed by Asociación Espa?ola de Normalización in January of 2025.)

辐射防护 密封源 泄漏测试方法

Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020) (Endorsed by Asociación Espa?ola de Normalización in February of 2023.)

辐射防护 密封源 泄漏试验方法

Radiation protection - Sealed sources - Leakage test methods

辐射防护 密封源 泄漏测试方法 (ISO/CD 9978:2018)

Radiation protection - Sealed sources - Leakage test methods (ISO/CD 9978:2018); Text in German and English