美利体育登录入口官网

环境测试 第 2.17 部分：测试 测试 Q：密封

Environmental testing, Part 2.17: Tests — Test Q: Sealing

以气口鼓风门测定建筑物气密性的标准试验方法

Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

评估通风燃烧美利体育官网首页网址减压引起的回火和溢出的标准指南

Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

建筑结构标准术语

Standard Terminology of Building Constructions

防护服装性能：第六卷

Performance of Protective Clothing: Volume VI

运输用可充气填充袋

Pneumatic Dunnage Bag for Transportation

环境试验 第2-17部分：试验 试验Q：密封

Environmental testing - Part 2-17: Tests - Test Q: Sealing

生物技术.美利体育官网首页网址.渗漏性试验程序指南

Biotechnology - Equipment - Guidance on testing procedures for leaktightness

制冷系统和热泵.元件和接头紧密型鉴定

Refrigerating systems and heat pumps. Qualification of tightness of components and joints

建筑物通风 管道系统 非金属管道 要求和试验方法

Ventilation for buildings. Ductwork. Non-metallic ductwork. Requirements and test methods

电气和光学连接元件.试验方法.气密性

Elements of electrical and optical connection - Test methods - Hermeticity

环境测试 测试 测试Q：密封性

Environmental testing - Tests. Test Q: Sealing

确定建筑物整体包封气密性-使用建筑空气处理系统进行风扇增压法

Determining the air tightness of the building envelope - fan pressurization method using the building air handling system

确定建筑物整体包封气密性-使用建筑空气处理系统进行风扇增压法

Determining the air tightness of the building envelope - fan pressurization method using the building air handling system

鱼雷包装箱通用规范

General Specifications for Torpedo Boxes

铁路车辆用三通旋塞

Three-way Cocks for Railway Rolling Stock

环境试验 第2-17部分：试验 试验 Q：密封

Environmental testing – Part 2-17: Tests – Test Q: Sealing

储粮仓CO2气调杀虫操作规程

CO2 Controlled Atmosphere Insecticide Operating Procedures for Grain Storage

多层纤维布/聚氯乙烯中空复合材料气密性试验方法

Test method for air tightness of multi-layer fiber cloth/polyvinyl chloride hollow composite materials

果品气调库管理规范

Regulations on the management of controlled atmosphere warehouses for fruit products

被动式超低能耗居住建筑节能设计规范

Code for energy-saving design of passive ultra-low energy residential buildings

建筑物绝热和能量经济学.第7部分:建筑物气密性.计划和执行的要求,推荐标准和实例

Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance

建筑物的隔热和能源经济 第7部分：建筑物的气密性 规划和性能的要求、建议和示例

Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance

幕墙.透气率.性能要求和分类

Curtain walling - Air permeability - Performance requirements and classification; German version EN 12152:2002

建筑物的通风 管道作业 圆形薄金属板管道的强度和泄漏（草案）

Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts

包装材料 软管材 封闭体的气密性试验方法（草案）

Packaging - Flexible tubes - Test method for the air tightness of closures

包装材料 软管材 封闭体的气密性试验方法（草案）

Packaging - Flexible tubes - Test method for the air tightness of closures

包装材料.软管材.封闭体的气密性试验方法;德文版本EN 12377-2014

Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:2014

烟囱.元部件.混凝土外壁构件;德文版本EN 12446-2011

Chimneys - Components - Concrete outer wall elements; German version EN 12446:2011

建筑物的通风 住宅通风用组件/产品的性能试验 第8部分：机械通风系统的非输送管供应和排气通风元件 (包括热恢复) （草案）

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems inte

建筑物通风.住宅通风形态的性能试验和安装检查

Ventilation for buildings - Performance testing and installation checks of residential ventilation systems; German version EN 14134:2004

门窗产品标准、性能特征第2部分：内部行人门

Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets; German version EN 14351-2:2018

建筑物通风 矩形截面金属板风管 强度和泄漏要求德文版 EN 1507:2006

Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; German version EN 1507:2006

建筑物通风 管道系统 非金属管道系统 要求和测试方法（草案）

Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods

无损检验.泄漏检验.选择检验方法和检验技术的标准

Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999

航空航天系列.光电连接件.试验方法.第319部分:气密和无焊缠绕连接

Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997

航空航天系列.电气和光学仪器连接元件.试验方法.第322部分:密封性试验

Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998

航空航天系列-电气和光学连接元件

Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998 / Note: Applies in conjunction with DIN EN 2591 (1992-12).

航空航天系列. 航空用光纤光缆. 测试方法. 第501部分: 光纤安全试验; 德文及英文版本EN 3745-501: 2005

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test; German and English version EN 3745-501:2005

通信电缆.试验方法规范.第4-9部分:环境试验方法.气动阻力; 德文版本 EN 50289-4-9:2001

Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance; German version EN 50289-4-9:2001

电子美利体育官网首页网址连接器.试验和测量.第11-13部分:气候试验.试验11n:气密性、无钎焊缠绕连接 (IEC 60512-11-13:2002); 德文版本 EN 60512-11-13:2002

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections (IEC 60512-11-13:2002); German version EN 60512-11-13:2002

半导体器件.机械和气候试验方法.第12部分: 变频振动

Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency (IEC 60749-12:2002); German version EN 60749-12:2002

半导体器件.机械和气候试验方法.第7部分:内部水分含量测量和其他残留气体分析

Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 60749-7:2011); German version EN 60749-7:2011

蓄电池和含碱或其他非酸性电解质电池组. 密封金属氢化物镍电池圆柱形可充电单电池 (IEC 62675-2014); 德文版本EN 62675-2014

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells (IEC 62675:2014); German version EN 62675:2014

抗液体和气体化学制品包括液态气溶胶和固体颗粒的防护服装 第1部分：透气式和不透气式"气密型" (1型) 和"非气密型" (2型) 防化服的性能要求（草案）

Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated 'gas-tight' (Type 1) and 'non-gas-tight' (Type 2) chemical protective suits; Germa

环境试验 第2-17部分：试验 试验 Q：密封 (IEC 60068-2-17:2023)；德文版本 EN IEC 60068-2-17:2023

Environmental testing - Part 2-17: Tests - Test Q: Sealing (IEC 60068-2-17:2023); German version EN IEC 60068-2-17:2023

建筑物内土壤和废物排放用热塑性塑料管道系统 接头气密性试验方法（ISO 13255:2010）

Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

建筑物热工性能 测定建筑物空气渗透性 风扇加压法 修正案A100

Thermal performance of buildings – Determination of air permeability of buildings – Fan pressurization method; Amendment A100

塑料管道系统.玻璃增强热固性塑料管.验证短期内部压力下墙的密封性试验方法

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure

塑料管道系统.聚乙烯(PE)开孔三通件.安装好的开孔三通上抗冲击应力的美利体育登录入口官网方法

Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee

医疗废物转运车技术要求(试行)

Technical standard for medical waste transport vehicle

粮油储藏 粮仓气密性要求

Air tightness requirements for grain and oil storage silos

密封继电器用钢包铜复合棒线材

Steel/copper composite rod and wire for hermetically sealed relay

低氧防治储粮害虫一般规则

Guideline of low oxygen control grain storage insect

电子元器件结构陶瓷材料性能测试方法 气密性测试方法

Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness

军用方舱通用试验方法

General test methods for military shelter

过滤吸收器性能试验方法 第1部分：气密性

Filter absorber performance test methods Part 1: Air tightness

地地导弹地面配气台通用规范

General specification for ground gas distributing equipment of ground-to-ground missile

职业安全标准体系. 液态和气态化学品防护服. 技术要求和试验方法

Occupational safety standards system. Protective clothing against liquid and gaseous chemicals. Technical requirements and test methods

气溶胶包装容器.气密性耐压试验方法

Products in aerosol packing. Methods for determination of excess vapour pressure and sealing

机械恒温控制器(温度调节器).通用技术要求和试验方法

Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

医用手套. 防漏密封的测定方法

Medical gloves. Method for determination of leak tightness

医用手套 密封性的测定

Medical gloves. Determination of leak tightness

幕墙. 透气性和透水性的测定方法

Curtain walling. Methods of determination of air and water transmission

职业安全标准体系.隔离服.动态条件下气动测量定义完整性方法

Occupational safety standards system. Insulating suits. Methods of pneumatic measuring definition integrity in dynamic conditions

核电利用核能的合格评定 以考试形式进行合格评定 统一手续 气体和液体方法的密封性检查

Conformity assessment for the nuclear power use nuclear energy. Conformity assessment in the form of examination. Unified procedures. Leak tightness examination by gas and liquid methods

包装材料.防漏与液压测试方法

Packagings. Leakproofness and hydraulic pressure testing methods

放射性核素电离辐射密封源.一般技术要求

Radionuclide ionizing radiation sealed sources. General technical requirements

一次性医疗检查手套.第1部分:橡胶乳胶或橡胶胶浆制手套的规格

Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution

用大规格陶瓷石砌筑. 热性能, 隔音和气密性的测定方法

Masonry from large-format ceramic stones. Methods for determining thermal properties, sound insulation and air-tightness

窗户和阳台块 使用自动化测试美利体育官网首页网址测定透气性、透水性和抗风性的方法

Window and balcony blocks. Methods for determining air permeability, water tightness and wind load resistance using automated testing equipment

环境测试 第2-17部分：试验 试验Q：密封性试验

Environmental testing - Part 2-17: Tests - Test Q: Sealing

飞机气门芯技术条件（试行）

Aircraft Valve Core Technical Conditions (Trial)

家用煤气软管

Domestic coal gas hose

环境测试 第 2-17 部分：测试 测试 Q：密封

Environmental testing — Part 2-17: Tests — Test Q: Sealing

电子美利体育官网首页网址连接器.试验和测量.第11-13部分:气候试验.试验11n:无钎焊包装连接的气密性

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections

软木塞和合成塞 物理和化学测试 第6部分 密封性测定

Cork and synthetic stoppers. Physical and chemical tests. Part 6 - Determination of liquid tightness.

包装 铝管 膜头气密性测试方法

Packaging. Flexible aluminium tubes. Test method to check the membrane peak air tightness.

有内胎和无内胎的航空器轮胎 气门咀、孔及帽 试验方法

Aircraft inner tube and tubeless tyre valves - Cores and caps - Test methods

小型制冷系统用电动切换阀

Step valve for small refrigeration system

隔爆型刮刀卸料离心机

Explosion-proof peeler centrifuge

小型制冷系统用两位三通电磁阀

3/2 Solenoid valve for small refrigeration system

家用和类似用途电自动控制器 电磁四通换向阀

Automatic electrical controls for household or similar use.4-way solenoid reversing valve

隔膜石棉布

Asbestos cloth for insulation

保温或冷藏车的车厢性能的试验方法

Performance test method for bodies of insulated or refrigerated vehicles

用于化学分析的瓷燃烧管

Porcelain Combustion Tubes for Chemical Analysis

化学分析用陶瓷燃烧管

Porcelain combustion tubes for chemical analysis

可互换式球面磨口玻璃接头

Interchangeable spherical ground glass joints

烟囱 陶瓷或陶土烟囱内衬 第一部分：干燥环境中使用的烟囱内衬 要求和测试方法

Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods

烟囱 粘土或陶瓷烟囱内衬 第2部分：潮湿环境下使用的烟囱内衬 要求和试验方法

Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods

建筑物通风 风管系统 非金属风管系统 要求和试验方法

Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods

邻近试验 密封性试验 方法与测量工具选择标准

Non-destructive testing - Leak testing - Criteria for method and technique selection

Dūmtraukiai 单壁烟道用陶土或陶瓷烟道块 要求和试验方法

Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods

环境试验 第2-17部分：试验方法 试验Q：密封（IEC 60068-2-17:2023）

Environmental testing - Part 2-17: Tests - Test Q: Sealing (IEC 60068-2-17:2023)

焊接美利体育官网首页网址及相关工艺的气密性 (ISO 9090:1989, IDT)

GAS TIGHTNESS OF EQUIPMENT FOR GAS WELDING AND ALLIED PROCESSES (ISO 9090:1989, IDT)

矿山用氧气充填泵技术条件

The oxygen fills pumps specification for mine

光干涉式甲烷测定器校准仪 通用技术条件

General technical specification for optical interferometric methane detector calibrator

环境试验 第 2-17 部分：试验 试验 Q：密封

Environmental testing - Part 2-17: Tests - Test Q: Sealing

环境测试 第 2-17 部分：测试 Q 测试：密封性

Environmental testing - Part 2-17: Tests - Test Q: Leaktightness

铁路车辆.铁路车辆及其元件的空气密封性的测定方法.试验和试验结果的说明

Railway rolling stock. Measurement methods of airtightness of railway vehicle and its elements. Tests and interpretation of results.

高音双簧管

Oboe

汽车用气压式制动灯开关技术条件

Specifications for pneumatic brake light switches for automobiles

汽车空调（HFC-134a）用液气分离器

Liquid-gas separator for automobile air conditioner (HFC-134a)

过滤器规范

filter specification

微波场效应晶体管（微波FET）管壳验收规范

Acceptance specification for microwave field effect transistor (microwave FET) package

能源高效建筑的质量与测试规定

Quality and testing requirements for energy-efficient buildings

微波管用陶瓷.金属封接件规范

Specification for ceramic.metal seals used in microwave tubes

单脊波导（带宽比2.4∶1）详细规范

Waveguides,single ridge(band width ratio 2.4∶1),detail specification

双脊波导（带宽比2.4∶1）详细规范

Waveguides,double ridge(band width ratio 2.4∶1),detail specification for

PS型锌空气电池

Detail specification for electronic components--Semiconductor integrated circuits--CC4008 CMOS 4-bit binary full adder with look ahead carry

进出口水上充气运动用品检验规程

Rules of inspection for import and export aquatic gasifies sport things

燃气器具的手动操作水龙头

Manually operated taps for gas burning appliances

幕墙产品标准

Curtain walling - Product standard

休闲住宿车辆和其他道路车辆居住用液化石油气系统安装规范

Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles

基本环境试验程序 第2-17部分：试验 试验Q：密封

Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing

汽车用压缩气弹簧

Compression gas spring for automobiles

动车组密封设计及试验规范

Specifications of sealing design and test for powered car train-set

环境测试 第 2-17 部分：测试 测试 Q：密封（由西班牙标准化协会于 2023 年 10 月批准 ）

Environmental testing - Part 2-17: Tests - Test Q: Sealing (Endorsed by Asociación Espa?ola de Normalización in October of 2023.)

WTA-指南 6-10: 建筑物气密性的详细规划与实施

WTA-Guideline 6-10 Air tightness of buildings, Part 2: Detailed planning and execution

现有建筑物气密性的测定

Existing Building Air Tightness - Part 3: Measurement of the air tightness

膨胀合金气密性试验方法

Test method for gas tightness of expanded alloys