美利体育登录入口官网

板级可靠性温度循环测试方法

Board-Level Reliability Temperature Cycling Test Method

快速管光损耗测量方法

Express Tube Optical Loss Measurements Methods

寒冷气候住宅的两个房间的房间空气分布性能的现场观察

Field Observations of Room Air Distribution Performance in Two Rooms of a Cold-Climate Home

测定穿孔产品温度循环效果的标准实施规程

Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

测定穿孔产品温度循环效果的标准实施规程

Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

塑料管道系统.热水和冷水用热塑管和配件.已安装的组件耐温度变化性能的试验方法

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling

塑料管道系统 热塑性阀门 弯曲温度循环后阀门完整性的测试方法

Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending

航空航天系列 航空用光纤和光缆 — 测试方法 第306部分：温度循环期间衰减的变化

AEROSPACE SERIES Fibres and cables, optical, aircraft use — Test methods — Part 306 : Variation of attenuation during temperature cycling

航空航天系列.飞行器用光纤和光缆.试验方法.温度循环

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling

航空航天系列.涂料和清漆.防冷裂缝温度循环测量的试验方法

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

通信电缆.试验方法规范.环境试验方法.温度循环

Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling

半导体器件.机械和气候试验方法.温度循环

Semiconductor devices - Mechanical and climatic test methods - Temperature cycling

电气材料, 印刷电路板和其它互联结构和组件的试验方法. 互连结构的试验方法 (印刷电路板). 温度循环过程中单镀通孔 (PTH) 阻力变化的监测

Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards). Monitoring of single plated-through hole (PTH) resistance change during temperature cy

电气继电器 测试和测量 密封的长期稳定性

Electrical relays. Tests and measurements - Long term stability of sealing

硫化橡胶或热塑性橡胶 — 压缩应力松弛的测定 第2部分：温度循环测试

Rubber, vulcanized or thermoplastic — Determination ofstress relaxation in compression Part 2 : Testing with temperature cycling

电气继电器 试验和测量 第49部分：密封的长期稳定性

Electrical relays – Tests and measurements – Part 49: Long term stability of sealing

塑料管道系统.聚乙烯(PE)管.耐温度循环试验方法

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling; German version EN 12119:1997

混凝土结构保护和检修用产品和美利体育官网首页网址.试验方法.热相容性测定.第3部分:无防冻盐冲击热循环

Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002

用于保护和修复混凝土结构的产品和系统 - 测试方法；热相容性测定 - 第 3 部分：无除冰盐影响的热循环

Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002

混凝土结构防护和维修用产品和美利体育官网首页网址.试验方法.热适应性测定.第4部分:干热循环试验

Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002

塑料管道系统.热塑管道系统用阀门.弯曲加温度循环后阀门完好性测试方法

Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997

航空航天系列.电气和光学连接元件.试验方法.第617部分:光学元件.温度循环; 德文版本 EN 2591-617:2002

Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002

航空航天系列.飞行器用电缆.试验方法.第415部分:温度骤变

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005

航空航天系列-电缆、电气、飞机用-测试方法-第415部分：温度快速变化

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005

航空系列 光纤和电缆 航空用途 测试方法 第306部分：温度循环期间衰减的变化

Aerospace series - Test methods for optical fibres and cables for aerospace use - Part 306: Change in attenuation during temperature cycling

航空航天系列. 飞行器用光纤和光缆. 试验方法. 第306部分: 温度循环中的衰减变化; 英文和德文版本 EN 3745-306: 2005

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005

航空航天系列 光纤和光缆 光学 飞机用 测试方法 第306部分：温度循环期间衰减的变化

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005 / Note: To be replaced by DIN EN 3745-306 (2022-07).

航空航天系列. 航空用光缆和光纤. 试验方法. 第402部分: 温度循环; 德文版本和英文版本EN 3745-402: 2005

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling; German and English version EN 3745-402:2005

航空航天系列.涂料和清漆.防冷裂缝温度循环测量的试验方法

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle; German and English version EN 4170:2007

航空航天系列色漆和清漆耐冷裂纹温度循环测量试验方法德语和英语版本 EN 4170:2007

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle; German and English version EN 4170:2007

环境试验.第2-14部分:试验.试验N:温度变化(IEC 60068-2-14-2009)德文版本EN 60068-2-14-2009

Environmental testing - Part 2-14: Tests - Test N: Change of temperature (IEC 60068-2-14:2009); German version EN 60068-2-14:2009

半导体器件.机械和气候试验方法.第25部分:温度循环

Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling (IEC 60749-25:2003); German version EN 60749-25:2003

半导体器件 机械和气候测试方法 第25部分：温度循环

Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling (IEC 60749-25:2003); German version EN 60749-25:2003 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standard until 2006-0...

电气材料、印制板和其他互连结构和组件的测试方法 第3-719部分：互连结构的测试方法（草案）

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change duri...

电气材料、印制板和其他互连结构和组件的测试方法 第3-719部分：互连结构的测试方法

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change duri...

同轴通信电缆 第1-209部分：环境试验方法 温度循环测试

Coaxial communication cables Part 1-209: Environmental test methods Temperature cycle test

光纤互连器件和无源部件 基本试验和测量规程 第2-47部分：试验 热冲击（草案）

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks

非压力应用的热塑性塑料管道系统 耐高温循环的测试方法（ISO 13257:2018）

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)

非压力应用的热塑性管道系统 耐高温循环测试方法

Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO 13257:2018

非压力地下排水和污水处理用热塑性塑料管道系统 耐组合温度循环和外部载荷的试验方法（ISO 13260:2010 + Amd.1:2017）（包括修正案：2017）

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010 + Amd.1:2017) (includes Amendment :2017)

用于非压力地下排水和污水处理的热塑性塑料管道系统 耐组合温度循环和外部载荷的测试方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010 + Amd.1:2017); German version EN ISO 13260:2011 + A1:2017

塑料管道系统 热水和冷水用热塑性塑料管道和配件 安装组件耐温度循环的测试方法

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011); German version EN ISO 19893:2018

道路车辆.电气及电子美利体育官网首页网址的环境条件和试验.第4部分：气候负荷

Road vehicles.Environmental conditions and testing for electrical and electronic equipment.Part 4: Climatic loads

航空涡轮发动机点火系统加速试验方法

Acceleration test means for ignition system of aircraft turbine engine

半导体器件.机械和气候试验方法.第25部分:温度循环

Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling

光纤电缆 第1-201部分：通用规范 基本光缆测试程序 环境试验方法 温度循环 方法 F1

Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1

光纤电缆 第1-209部分：通用规范 基本光缆测试程序 环境试验方法 老化 方法 F9

Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, method F9

光纤电缆 第1-217部分：通用规范 基本光缆测试程序 环境试验方法 电缆收缩（光纤突出） 方法 F17

Optical fibre cables - Part 1-217: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable shrinkage (fibre protrusion), Method F17

电气材料, 印制板和其他互连结构和组合装置的试验方法. 第3-719部分: 互连结构(印制板)的试验方法. 监测温度循环期间单面金属化通孔(PTH)的电阻变化

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during

同轴通信电缆 第 1-209 部分：环境测试方法 热循环（1.0 版）

Coaxial communication cables – Part 1-209: Environmental test methods – Thermal cycling (Edition 1.0)

电子组装技术. 第4部分: 区域阵列类型包装表面安装美利体育官网首页网址的焊接接缝的耐久性试验方法

Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices

家具 家具表面涂层的试验方法 表面对温度变化的抗性

Furniture. Surface finish test methods for furniture. Surface resistance to temperature changes.

无压地下排水和污水用热塑性塑料管道系统.抗温度循环和外部载荷结合的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading

塑料管道系统.热水和冷水用热塑性塑料管道和接头.安装组件耐热循环性的试验方法

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling

JEDEC固态技术协会标准

JEDEC Solid State Technology Association Standard

温度循环

Temperature Cycling

温度循环

Temperature Cycling

温度循环

Temperature Cycling

JEDEC 标准 A105D：功率与温度循环测试

POWER AND TEMPERATURE CYCLING TEST METHOD

航空航天系列 纤维和电缆 光学 飞机用 试验方法 第402部分：温度循环

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling

电气材料、印刷电路和其他连接件及组件的测试方法 第3-719部分：连接件（印刷电路板）的测试方法 金属化单独连接孔电阻在热循环期间的变化……

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change duri...

电气继电器 试验和测量 第49部分：长期密封稳定性 (IEC 63522-49:2025)

Electrical relays - Tests and measurements - Part 49: Long term stability of sealing (IEC 63522-49:20250

塑料管道系统 热塑材料冷热给水管道及附件 安装组件耐温度循环测试方法（ISO 19893:2011）

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)

电气继电器 试验和测量 第49部分：密封的长期稳定性

Electrical relays - Tests and measurements - Part 49 : long term stability of sealing

建筑防洪装置 第2部分：试验方法

Anti-flooding devices for buildings - Part 2: Test methods

塑料管道系统 热塑性阀门 弯曲温度循环后阀门完整性的试验方法

Plastics piping systems - Thermoplastics valves -Test method for the integrity of a valve after temperature cycling under bending

航空航天系列 纤维和电缆、光学制品、航空器用途 试验方法 第306部分：温度循环过程中衰减的变化

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling

航空航天系列 纤维和电缆 光学 航空器用途 试验方法 第402部分：温度循环测试

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling

航空系列 涂料和清漆 测定冷裂纹温度循环抗性的试验方法

Aerospace series - Paints and vernishes - Test method for measurement of resistance to cold crack temperature cycle

金属和合金的腐蚀 在高温腐蚀条件下进行热循环暴露试验的方法（ISO 13573:2012 等同）

Corrosion of metals and alloys - Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials (ISO 13573:2012, IDT)

用于语音服务、移动性管理和 RFSS 能力轮询服务的项目 25 ISSI 消息和程序 附录 3 与 IWF 互通（TIA-102.BACA-B 的附录）

Project 25 ISSI Messages and Procedures for Voice Services, Mobility Management, and RFSS Capability Polling Services- Addendum 3- Interworking with an IWF (Addendum to TIA-102.BACA-B)

塑料管道系统 热塑性塑料阀门 弯曲温度循环后阀门完整性的测试方法

PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING.

航空航天系列 电气和光学连接元件 测试方法 第617部分：光学元件 温度循环

Aerospace series. Elements of electrical and optical connection. Test methods. Part 617: Optical elements. Temperature cycling (Endorsed by AENOR in August of 2002.)

航空航天系列 光纤和电缆 光学 飞机用途 测试方法 第402部分：温度循环

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling (Endorsed by AENOR in March of 2006.)

电气材料、印制板和其他互连结构和组件的测试方法 第3-719部分：互连结构的测试方法

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change duri...

光伏模组的扩温循环试验方法

Extended thermal cycling of PV modules — Test procedure (IEC 62892:2019)

光纤电缆-第1部分211: 基本规范——基本光纤电缆测试程序——环境测试方法——护套收缩，方法F11

Optical fibre cables — Part 1-211: Generic specification — Basic optical cable test procedures — Environmental test methods — Sheath shrinkage, Method F11