美利体育登录入口官网

AMPP Paper 16902-2021

AMPP Paper 17529-2022

手动和自动开关阀外部泄漏评估的标准方法

Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves

耐火材料热冲击效应和热循环效应定量测量的标准试验方法

Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

耐火材料热循环效应定量测量的标准试验方法

Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

硫化涂层耐热循环的标准实施规程

Standard Practice for Resistance of Cured Coatings to Thermal Cycling

测定固化涂层抗热循环的标准实施规程

Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

确定固化涂层对热循环的电阻的标准实践

Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

循环温度和湿度环境中光伏模组的的标准试验方法

Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

循环温度和湿度环境中光伏组件的标准试验方法

Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

形状记忆合金单轴恒力重复热循环的标准试验方法

Standard Test Method for Uniaxial Constant Force Repeated Thermal Cycling of Shape Memory Alloys

塑料管道系统 聚乙烯(PE)阀门 耐热循环试验方法

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling

混凝土结构保护和修整用的产品和系统.试验方法.热符合性的测定.无盐水浸湿解冰循环法

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thermal cycling without de-icing salt impact

混凝土结构的防护和修整用产品和系统.试验方法.结构粘接剂耐久性的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding agents

低压架空绝缘电缆附件的试验要求 第 5 部分：电气老化试验

Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test

精细陶瓷 (高级陶瓷, 高级工业陶瓷). 精细陶瓷基片的热疲劳试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate

塑料管道系统 地下排水和污水排放管路 结合温度循环和外部负载的耐久性测试方法

Plastic piping systems - Test method for durability of underground drainage and wastewater pipes combined with temperature cycling and external loads

天然石试验方法.热循环导致的外表变化的敏感性测定;德文版本EN 16140-2011

Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles; German version EN 16140:2011

天然石材试验方法 大理石抗热湿周期的测定（草案）

Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles

耐火制品.样品的热稳定性测定方法

Refractory products. Procedure for determination of thermal shock resistance on samples

耐火制品 样品的热稳定性测定方法

Refractory products. Method for determination of thermal shock resistance on samples

耐火材料.压缩空气冷却热电阻的测定方法

Refractories. Methods for determination of thermal resistance with cooling by compressed air

计算和强度试验. 采用声学方法测定钢材热循环疲劳损坏. 通用要求

Calculation and strength testing. Acoustic method for determination of damage under thermocyclic fatigue of steel. General requirements

金属板材热疲劳试验方法

Test method for thermal fatigue of metals with rectangular plate specimen

淋浴臂适配器

Shower Arm Adapter Which Allows Connection of the Shower Arm Assembly to be Made to CTS Tube Outside of the Finished Wall

延长光伏组件的热循环 试验程序

Extended thermal cycling of PV modules - Test procedure

直流电流致热循环试验

DC Current Induced Thermal Cycling Test

精细陶瓷 (高级陶瓷, 高级工业陶瓷). 精细陶瓷基片的热疲劳试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for thermal fatigue of fine ceramics substrate

混凝土结构的防护与修复产品及系统 试验方法 第3部分：热处理或未处理注射材料的粘结力测定 斜缝法

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method

混凝土结构防护和修复用产品及系统 试验方法 结构粘合剂耐久性的测定

Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents

聚光光伏模组 区分热疲劳耐受性差异的热循环试验（IEC 62925:2016）

Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability (IEC 62925:2016)

开发与测试新一代高温抗腐蚀涂层

Developing and testing a new generation of high temperature corrosion resistant coatings

卫星组件空间环境试验方法 真空冷焊试验

Space environment test method for satellite components Vacuum cold welding test

离子渗氮

Ion Nitriding

塑料管道系统 聚乙烯（PE）阀门 耐热循环试验方法

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling

混凝土结构的保护和修复产品与系统 试验方法 第3部分：注射产品黏结性确定 带或不带热循环 斜剪法

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method

混凝土结构保护和修复用产品和系统 试验方法 热相容性测定 第3部分：无除冰盐影响的热循环

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact

牙科 金属陶瓷和瓷瓷系统的一致性测试（ISO 9693:2019）

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019)

用于保护和修复混凝土结构的产品和系统 测试方法 第3部分：注射产品粘附性的测定，有或没有热循环 斜剪法

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method

聚光光伏(CPV)模块 热循环测试以区分热疲劳耐久性的提高

Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability