砌体单位面积孔隙百分比测试方法。指骨料颗粒间未被固体矿物占据的空间比例，或固体中孔隙体积与总体积之比，通常以百分数表示。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 216-2007(R2020) 试验 |
Standard Method of Test for One-Dimensional Consolidation Properties of Soils
加载装置 |
2020 美国公路与运输员工协会 |
| AASHTO T 304-2017(R2020) 试验 |
Standard Method of Test for Uncompacted Void Content of Fine Aggregate
细集料 |
2020 美国公路与运输员工协会 |
| ACI SP-282-2011 试验 |
Field performance of Portland cement permeable concrete anti-skid pavement in cold climates
渗透性 透水混凝土 |
2011 美国混凝土学会 |
| AENOR UNE-EN ISO 18754:2022 |
精细陶瓷（先进陶瓷 先进技术陶瓷） 密度和表观气孔率的测定（ISO 18754:2020）（2022年6月西班牙标准化协会批准采用 ） Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020) (Endorsed by Asociación Espa?ola de Normalización in June 2022.)
精细陶瓷 |
2022-06-01 西班牙标准化协会 |
| ANSI/EIA 364-60B:2020 试验标准 |
TP-60B General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets
电连接器 |
2020-04-01 美国国家标准学会 |
| AS 2331.3.4:2001(R2017) 试验标准 |
给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 Methods of test for metallic and related coatings - Corrosion and related property tests - Thioacetamide anti-tarnish and porosity tests
电镀层 |
2017 澳大利亚标准协会 |
| AS 4133.2.1.1:2005(R2016) 试验标准 |
工程用岩石的试验方法 岩石孔隙度和密度试验 岩石孔隙度和干密度的测定 饱和法和卡规法 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques
干密度 |
2016 澳大利亚标准协会 |
| AS 4133.2.1.2:2005(R2016) 试验标准 |
工程用岩石的试验方法 岩石孔隙度和密度试验 岩石孔隙度和干密度的测定 饱和法和卡规法 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques
岩石样品 干密度 |
2016 澳大利亚标准协会 |
| AS/NZS 4266.22:2004(R2006) 试验 |
Reconstituted wood-based panels - Methods of test - Porosity of laminated surface
重组木质板材 |
2006 澳大利亚/新西兰标准 |
| ASTM B735-06 Test Method |
Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
|
2006 美国材料与试验协会 |
| ASTM B735-06(2011) Test Method |
Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
|
2006 美国材料与试验协会 |
| ASTM B735-16 Test Method |
Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
金镀层 |
2016 美国材料与试验协会 |
| ASTM B765-03(2023) 指南标准 |
Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
电沉积涂层 |
2023-11-01 美国材料与试验协会 |
| ASTM B798-95(2005) Test Method |
Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
测量区域 |
1995 美国材料与试验协会 |
| ASTM B798-95(2014) Test Method |
Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
测量区域 |
1995 美国材料与试验协会 |
| ASTM B799-95(2020) 测试方法标准 |
Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
|
2020-04-01 美国材料与试验协会 |
| ASTM B799-95(2025) 试验标准 |
Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
|
2025-04-01 美国材料与试验协会 |
| ASTM B809-25 试验 |
Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
金属涂层 |
2025-01-01 美国材料与试验协会 |
| ASTM B866-95(2018) 试验标准 |
用多硫化物浸没法测定金属镀层中总缺陷和机械损伤的标准试验方法 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
金属涂层 |
2018-08-01 美国材料与试验协会 |
| ASTM B920-01(2006)e1 Practice |
用次氯酸钠液的蒸气测定金属衬底上金和钯合金覆层孔隙度的标准实施规范 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
腐蚀产物 |
2001 美国材料与试验协会 |
| ASTM B920-01(2011) Practice |
用次氯酸钠溶液蒸汽测定金属基材上的金和钯合金涂层孔隙度的标准操作规程 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
金属涂层 |
2001 美国材料与试验协会 |
| ASTM C1145-19 术语 |
Standard Terminology of Advanced Ceramics
高级陶瓷 |
2019-07-01 美国材料与试验协会 |
| ASTM C1688/C1688M-26 试验标准 |
Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
透水混凝土 |
2026-01-01 美国材料与试验协会 |
| ASTM C29/C29M-23 试验方法标准 |
Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
|
2023-10-01 美国材料与试验协会 |
| ASTM C493-98 试验方法 |
Determination of bulk density and porosity of granular refractory materials by mercury displacement method
体积密度 |
1998 美国材料与试验协会 |
| ASTM C642-06 Test Method |
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
硬化混凝土 |
2006 美国材料与试验协会 |
| ASTM C642-13 Test Method |
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
硬化混凝土 |
2013 美国材料与试验协会 |
| ASTM C642-21 试验 |
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
|
2021-12-15 美国材料与试验协会 |
| ASTM C948-81(2023) 试验 |
玻璃纤维增强混凝土薄片的干体积密度、湿体积密度、吸水率和表观孔隙率的标准试验方法 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
玻璃纤维增强混凝土 |
2023-05-01 美国材料与试验协会 |
| ASTM D2980-17e1 试验标准 |
Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
泥炭 |
2017-02-01 美国材料与试验协会 |
| ASTM D3793-04 Test Method |
Standard Test Method for Low-Temperature Coalescence of Latex Paint Films
|
2004 美国材料与试验协会 |
| ASTM D8325-20 规范 |
Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
核石墨 比表面积 |
2020-06-01 美国材料与试验协会 |
| ASTM E2109-01(2014) Test Method |
Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
热喷涂涂层 |
2001 美国材料与试验协会 |
| ASTM E2109-01(2021) 测试方法标准 |
Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
显微镜 热喷涂涂层 |
2021-09-01 美国材料与试验协会 |
| ASTM F2150-07 Guide |
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
组织工程医疗产品 |
2007 美国材料与试验协会 |
| ASTM F2603-06(2020) 指南标准 |
Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds
|
2020-08-01 美国材料与试验协会 |
| ASTM RR-C27-1000 1981 试验 |
C0948-玻璃纤维混凝土薄断面的干湿容重、吸水率、显气孔率试验 C0948-Test for Dry and Wet Bulk Density, Water Absorption, Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
干密度 玻璃纤维增强混凝土 |
1981 美国材料与试验协会 |
| BS 1016-108.5:1992(1999) 试验 |
煤和焦炭的分析和测试方法 - 第108部分：焦炭专用测试 - 第 108.5 节密度和孔隙率的测定 Methods for Analysis and testing of coal and coke — Part 108 : Tests special to coke — Section 108.5 Determination of density and porosity
|
1999 英国标准学会 |
| BS 7591-2:1992(1999) 试验 |
Porosity and pore size distribution of materials — Part 2 : Method of evaluation by gas adsorption
孔径分布 |
1999 英国标准学会 |
| BS EN 1936:2006(2007) 试验 |
天然石材试验方法 真密度和表观密度以及总孔隙率和开孔率的测定 Natural stone test methods — Determination of real density and apparent density, and of total and open porosity
真实密度 |
2007-01-01 英国标准学会 |
| BS EN 772-2:1998(2006) 试验 |
砌体单元的测试方法 - 第2部分：砌体单元中空隙面积百分比的测定（通过纸压痕） Methods of test for masonry units — Part 2 : Determination of percentage area of voids in masonry units (by paper indentation)
|
2006-01-01 英国标准学会 |
| BS EN 772-3:1998 试验 |
砖石结构体的试验方法.流体静态称重法对陶土砖石结构体的孔隙百分率和净体积的测定 Methods of test for masonry units - Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
粘土砌块 |
1998-12-15 英国标准学会 |
| BS EN ISO 15720:2001 试验 |
金属覆层.孔隙率试验.凝胶材料电谱法测定金属基体上金或钯涂层的孔隙率 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
|
2001-07-15 英国标准学会 |
| BS EN ISO 17892-11:2019 试验 |
Geotechnical investigation and testing. Laboratory testing of soil - Permeability tests
|
2019-03-31 英国标准学会 |
| BS EN ISO 18332:2008 术语 |
Metallic and other inorganic coatings - Definitions and conventions concerning porosity
不连续性 |
2008-02-29 英国标准学会 |
| BS ISO 1014-3:2025 试验标准 |
Coke - Determination of porosity
焦炭 |
2025-07-31 英国标准学会 |
| BS PD CEN/TR 14539:2021 试验标准 |
Straight ammonium nitrate fertilizers. Comparative study on the determination of porosity (oil retention)
硝酸铵 |
2021-06-15 英国标准学会 |
| DANSK DS/EN ISO 18754:2022 |
精细陶瓷（高级陶瓷、先进技术陶瓷） 密度和显孔隙率的测定（ISO 18754:2020） Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of density and apparent porosity (ISO 18754:2020)
精细陶瓷 |
2022-04-25 丹麦标准化协会 |
| DIN 30910-4:2010 规范 |
Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
烧结金属 |
2010-03 德国标准化学会 |
| DIN 30910-4:2010-03 规范 |
Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
烧结金属 |
2010-03 德国标准化学会 |
| DIN 30912-3:1990 规范 |
Sintered metal materials; sint-guide-lines; part 3: heat-treatment of sintered parts
烧结金属 |
1990-10 德国标准化学会 |
| DIN 66126 E:2014-03 试验 |
Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
比表面积 |
2014-03 德国标准化学会 |
| DIN 66137-1 E:2018-03 术语/符号 |
Determination of solid state density - Part 1: Principles
|
2018-03 德国标准化学会 |
| DIN EN 10331:2003-09 规范 |
Magnetic materials - Specification for sintered soft magnetic materials; German version EN 10331:2003 / Note: DIN 30910-5 (1990-10) remains valid alongside this standard until 2003-10-01.
烧结密度 |
2003-09 德国标准化学会 |
| DIN EN 12901:2000 术语 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions; Trilingual version EN 12901:1999
颗粒大小 |
2000-01 德国标准化学会 |
| DIN EN 15655 E:2016-07 规范 |
球墨铸铁管、管件及附件 管和配件用聚氨酯内衬 要求和试验方法（草案） Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
球墨铸铁管 |
2016-07 德国标准化学会 |
| DIN EN 2564:2018 试验 |
Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents; German and English version EN 2564:2018
纤维含量 |
2018-12-00 德国标准化学会 |
| DIN EN 2591-507:2003 试验 |
航空航天系列.光电连接元件.试验方法.第507部分:电镀孔隙率 Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002
镀层 |
2003-05 德国标准化学会 |
| DIN EN 2591-507:2003-05 试验 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
镀层 |
2003-05 德国标准化学会 |
| DIN EN 772-4:1998-10 试验 |
砌体单元的测试方法 第4部分：天然石砌体单元的实际密度和堆积密度以及总孔隙率和开孔率的测定 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
|
1998-10 德国标准化学会 |
| DIN EN ISO 14647:2016 试验 |
金属覆盖层.金属基体上金镀层孔隙率的测定.硝酸蒸气法(ISO 14647-2000).德文版本EN ISO 14647-2016 Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000); German version EN ISO 14647:2016
金镀层 |
2016-11 德国标准化学会 |
| DIN EN ISO 18332:2008-04 术语 |
Metallic and other inorganic coatings - Definitions and conventions concerning porosity (ISO 18332:2007); German version EN ISO 18332:2008
中断 |
2008-04 德国标准化学会 |
| DIN EN ISO 18754:2022 试验 |
先进陶瓷 密度和表观孔隙率的测定（ISO 18754:2020）；德文版 EN ISO 18754:2022 Advanced ceramics – Determination of density and apparent porosity (ISO 18754:2020); German version EN ISO 18754:2022
精细陶瓷 |
2022-06-01 德国标准化学会 |
| DIN EN ISO 18754:2022-06 |
精细陶瓷（高级陶瓷、先进技术陶瓷）-密度和表观孔隙率的测定（ISO 18754:2020） Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020); German version EN ISO 18754:2022
精细陶瓷 |
2022-06 德国标准化学会 |
| DIN EN ISO 27874:2009 规范 |
金属和其它无机镀层.电气、电子和工程用电镀金和金合金镀层.规范和试验方法 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008); English version of DIN EN ISO 27874:2009-01
中间镀层 |
2009-01 德国标准化学会 |
| DIN EN ISO 27874:2009-01 规范 |
金属和其他无机涂层 用于电气、电子和工程用途的电沉积金和金合金涂层 规格和测试方法 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008); German version EN ISO 27874:2008
中间镀层 |
2009-01 德国标准化学会 |
| DIN EN ISO 29601:2011 试验 |
涂料和清漆.防护漆体系的防腐蚀.干膜内多孔性的评价(ISO 29601-2011).德文版本EN ISO 29601-2011 Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011); German version EN ISO 29601:2011
|
2011-07 德国标准化学会 |
| DIN EN ISO 29601:2011-07 试验 |
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011); German version EN ISO 29601:2011
|
2011-07 德国标准化学会 |
| DIN EN ISO 4524-3 E:2020-11 试验标准 |
金属镀层 电镀金和金合金镀层的测试方法 第3部分：孔隙率的电刻器试验（草案） Test methods for electroplated gold and gold alloy coatings on metallic coatings Part 3: Electrograph test for porosity (draft)
|
2020-11 德国标准化学会 |
| DIN EN ISO 4524-3:1995 试验 |
金属镀层.电镀金和金合金镀层的测试方法.第3部分:孔隙率的电刻器试验 (ISO 4524-3:1985); 德文版本 EN ISO 4524-3:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995
|
1995-04 德国标准化学会 |
| DIN ISO 5755-2004 规范 |
Sintered metal materials - Specifications (ISO 5755:2001)
烧结金属 |
2004-11 德国标准化学会 |
| DIN V ENV 1071-5:1995-04 试验 |
Test methods for advanced ceramics - Ceramic coatings - Part 5: Determination of porosity
微孔 陶瓷涂层 |
1995-04 德国标准化学会 |
| DVGW W 213-2:2005-06 |
Filtration methods for particle removal - Part 2: Evaluation and application of granular filter media
颗粒度 |
2001-01-01 德国煤气与水工业协会 |
| DZ/T 0161.1-1995 规范 |
Steel Wrapped Filter Hose
|
1996-01-07 行业标准-地质 |
| GB/T 18179-2000 CF |
Metallic coatings-Porosity tests-Humid sulfur(flowers of sulfur) test
金属覆盖层 |
2000-08-28 国家市场监督管理总局 |
| GB/T 19351-2003 CF |
Metallic coatings-Determination of porosity in gold coatings on metal substrates-Nitric acid vapour test
|
2003-10-29 国家市场监督管理总局 |
| GB/T 21650.2-2008 规范 |
压汞法和气体吸附法测定固体材料孔径分布和孔隙度.第2部分:气体吸附法分析介孔和大孔 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 2: Analysis of mesopores and macropores by gas adsorption
孔径分布 |
2008-04-16 国家市场监督管理总局 |
| GB/T 23561.4-2009 术语 |
煤和岩石物理力学性质测定方法.第4部分:煤和岩石孔隙率计算方法 Methods for determining the physical and mechanical properties of coal and rock.Part 4:Methods for calculating the porosity of coal and rock
|
2009-04-08 国家市场监督管理总局 |
| GB/T 24586-2009 试验 |
Iron ores.Determination of apparent density，true density and porosity
真密度 |
2009-10-30 国家市场监督管理总局 |
| GB/T 33052-2016 试验方法 |
Microporous functional membrane—Measurement for Porosity—Absorption method by cetane
|
2016-10-13 国家市场监督管理总局 |
| GB/T 42697-2023 试验 |
Test method for porosity of nonwoven fabrics
非织造布 |
2023-05-23 国家市场监督管理总局 |
| GB/T 44524-2024 规范 |
增材制造 金属制件孔隙率 工业计算机层析成像（CT）美利体育登录入口官网方法 Industrial Computer Tomography (CT) Method for Porosity Detection of Additively Manufactured Metal Parts
|
2024-09-29 国家市场监督管理总局 |
| GOST R 58129-2018 试验 |
Steel wire and products thereof. Non-ferrous metallic coatings on steel wire. Tin coatings
镀层质量 |
2018 俄罗斯标准局 |
| GOST R ISO 7198-2013 试验 |
Cardiovascular implants. Tubular vascular prostheses
生物相容性 |
2013 俄罗斯标准局 |
| HB 5042-1992 |
Quality inspection of decorative chrome plating
耐蚀性 |
1992-10-04 行业标准-航空 |
| HY/T 039-1995 试验 |
Determination method of microporous membrane pore performance
微孔滤膜 |
1995-02-20 行业标准-海洋 |
| HY/T 0429-2024 规范标准 |
Polytetrafluoroethylene Hollow Fiber Microporous Membrane
|
2024-09-13 行业标准-海洋 |
| HY/T 063-2002 规范 |
Tubular ceramic microporous filtration membrane elements
|
2002-12-30 行业标准-海洋 |
| IEC 60404-8-9:1994 规范 |
磁性材料 第8部分:单项材料规范 第9节:烧结软磁材料的标准规范 Magnetic materials - Part 8: Specifications for individual materials - Section 9: Standard specification for sintered soft magnetic materials
烧结密度 |
1994-08 国际电工委员会 |
| IRAM 6766:2015 试验 |
Packaging. Aluminium cylindrical containers. Test method to determinate the porosity of the internal coating.
内部涂层 |
2015-02-20 阿根廷标准化研究所 |
| ISO 10049:2019 试验 |
Aluminium alloy castings — Visual method for assessing porosity
铝合金压铸件 |
2019-06-19 国际标准化组织 |
| ISO 1014-3:2025 试验标准 |
Coke - Part 3: Determination of porosity
焦炭 |
2025-07-01 国际标准化组织 |
| ISO 14647 试验标准 |
Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test
|
国际标准化组织 |
| ISO 15720 试验标准 |
金属涂层.孔隙率试验.用凝胶体电色谱法测定金属基材上金或钯涂层的孔隙率 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
金属涂层 |
国际标准化组织 |
| ISO 15721 试验标准 |
金属涂层.孔隙率试验.用亚硫酸/二氧化硫蒸气测定金或钯涂层中的孔隙率 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
腐蚀产物 金属涂层 |
国际标准化组织 |
| ISO 17785-2:2018 试验 |
Testing methods for pervious concrete - Part 2: Density and void content
透水混凝土 |
2018-05-01 国际标准化组织 |
| ISO/TR 26946:2011 指南标准 |
Standard method for porosity measurement of thermally sprayed coatings
热喷涂涂层 |
2011-11 国际标准化组织 |
| JB/T 14614-2024 规范 |
Diesel engine selective catalytic reduction trap
软化温度 |
2024-03-29 行业标准-机械 |
| JIS D 4418:1996 试验标准 |
Test procedure of porosity for brake linings and pads of automobiles
制动衬片 |
1996-01-01 日本工业标准调查会 |
| JIS M 8716:1990 试验标准 |
Iron ore pellets -- Determination of apparent density and porosity
|
1990-11-01 日本工业标准调查会 |
| JSA JIS L 1099-2012 试验 |
Testing methods for water vapour permeability of textiles
水蒸气渗透性 |
2012-03-21 日本工业标准调查会 |
| LST EN 3475-514:2014 试验 |
航空航天系列 飞机用电缆 试验方法 第514部分：铝绞线铜镀层孔隙度 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
铜包铝线 |
2014-08-29 立陶宛标准局 |
| LST EN ISO 14647:2016 试验 |
金属涂层 金属基材上镀金层的孔隙测定 硝酸蒸气法（ISO 14647:2000） Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000)
金镀层 |
2016-09-12 立陶宛标准局 |
| LST EN ISO 18754:2022 |
技术陶瓷（现代陶瓷、现代技术陶瓷） 密度和表观孔隙率的测定（ISO 18754:2020） Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020)
精细陶瓷 |
2022-06-30 立陶宛标准局 |
| MT/T 1023-2006 试验 |
Judging method of infusibility for coal seam infusion
|
2006-11-02 行业标准-煤炭 |
| NF B43-402*NF EN ISO 18754:2022 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
精细陶瓷 |
2022-04-20 法国标准化协会 |
| NF EN ISO 18754:2022 |
Technical ceramics - Determination of density and apparent porosity
精细陶瓷 |
2022-04-20 法国标准化协会 |
| QC/T 272-2025 规范 |
Technical Specifications of Aluminum Alloy Castings for Automobiles
铝合金铸件 |
2025-04-10 行业标准-汽车 |
| QJ 2734-1995 规范 |
Technical conditions for low-tin bronze coating
结合强度 |
1995-04-26 行业标准-航天 |
| SAE AMS-P-29609A-2016 规范 |
Polyimide Retainer Material, Porous Non-Metallic
保持架 |
2016-06-09 美国机动车工程师协会 |
| SS-EN 12901:1999 术语 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions
无机支撑和过滤材料 |
1999 瑞典标准研究所 |
| SS-EN ISO 10309:2016 试验 |
金属涂层 孔隙试验 铁酚试验（ISO 10309:1994） Metallic coatings - Porosity tests - Ferroxyl test (ISO 10309:1994)
金属镀层 |
2016 瑞典标准研究所 |
| SS-EN ISO 14647:2016 试验 |
金属涂层 金属基材上金涂层中孔隙率的测定 硝酸蒸汽试验（ISO 14647:2000） Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000)
金镀层 |
2016 瑞典标准研究所 |
| SS-EN ISO 15720:2001 试验 |
金属覆盖层 孔隙率试验 用凝胶体电色谱法测定金属基材上金或钯覆盖层的孔隙率（ISO 15720:2001） Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
金属涂层 |
2001 瑞典标准研究所 |
| SS-EN ISO 15721:2001 试验 |
金属覆盖层 孔隙率试验 用亚硫酸/二氧化硫蒸气测定金或钯覆盖层的孔隙率（ISO 15721:2001） Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
腐蚀产物 金属镀层 |
2001 瑞典标准研究所 |
| SS-EN ISO 18754:2022 |
精细陶瓷（先进陶瓷、先进技术陶瓷） 密度和显气孔率的测定（ISO 18754:2020） Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020)
精细陶瓷 |
2022 瑞典标准研究所 |
| SS-ISO 15901-1:2006 试验 |
固体材料的孔径分布和孔隙度测定 汞孔隙度法和气体吸附 第1部分：汞孔隙度法（ISO 15901-1:2005 等同采用） Pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry (ISO 15901-1:2005, IDT)
孔径分布 |
2006 瑞典标准研究所 |
| T/CAMDI 067-2021 规范标准 |
Additive manufacturing of tantalum metal spinal prosthesis
|
2021-08-11 中国团体标准 |
| T/CSTM 00356-2022 试验 |
Test method for porosity of expanded perlite
膨胀珍珠岩 |
2022-01-25 中国团体标准 |
| T/CSTM 00553-2022 试验 |
Method for determination of porosity of lightweight porous material
真密度 视密度 |
2022-01-25 中国团体标准 |
| T/SDMS 005-2021 试验 |
PTFE-based membrane for hydrogen fuel cell proton exchange membrane
塑料薄膜 |
2021-10-26 中国团体标准 |
| T/SXERA 001-2020 规范 |
Civil clean carbon
冷压强度 |
2020-12-18 中国团体标准 |
| UNE-CR 14539:2003 试验 |
Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention).
|
2003-02-14 西班牙标准化协会 |
| UNE-EN 12901:2000 术语 |
PRODUCT USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. INORGANIC SUPPORTING AND FILTERING MATERIALS. DEFINITIONS.
无机支撑和过滤材料 颗粒尺寸 |
2000-02-28 西班牙标准化协会 |
| UNE-EN 772-3:1999 试验 |
砌体单元的测试方法 第3部分：通过静水称重测定粘土砌体单元的净体积和空隙百分比 METHODS OF TEST FOR MASONRY UNITS - PART 3: DETERMINATION OF NET VOLUME AND PERCENTAGE OF VOIDS OF CLAY MASONRY UNITS BY HYDROSTATIC WEIGHING.
粘土砌块 |
1999-04-19 西班牙标准化协会 |
| UNE-EN ISO 10070:2020 试验 |
金属粉末 通过测量稳态流动条件下粉末床的空气渗透性来确定包络比表面积 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
空气渗透性 |
2020-04-15 西班牙标准化协会 |
| UNE-EN ISO 18754:2022 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020) (Endorsed by Asociación Espa?ola de Normalización in June of 2022.)
精细陶瓷 |
2022-06-01 西班牙标准化协会 |
| UNI EN ISO 18754:2022 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
精细陶瓷 |
2022-05-26 意大利统一标准化组织 |
| WJ 1357-2007 规范 |
炮弹、火箭弹、导弹、引信、火工品钢、铜及铜合金零件银电镀层规范 Specifications for silver plating on steel, copper and copper alloy parts of shells, rockets, missiles, fuzes, pyrotechnics
基体金属 |
2007-11-01 行业标准-兵工民品 |
| WJ 455-1995 规范 |
Metal coating. Specifications for nickel electroplated coatings of optical instrument
镍镀层 附着强度 |
1995-12-06 行业标准-兵工民品 |
| WJ 542-2007 规范 |
炮弹、火箭弹、导弹、引信、火工品钢、铜及铜合金零件锡电镀层规范 Specification for tin plating of shells, rockets, missiles, fuzes, pyrotechnic steel, copper and copper alloy parts
基体金属 |
2007-11-01 行业标准-兵工民品 |
| XP P98-151 (1996-02-01) 试验 |
Method for occasional inspection of void content in hot and cold mix asphalt paving and recycling of old materials
参考板 |
1996-02-01 法国标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-06-05 02:02