排除开闭孔隙影响后,干燥材料质量与其真实体积的比值(GB5161标准)。区别于表观密度,能更准确反映岩石等材料的本质特性。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AS 1774.6:2001(R2013) 试验 |
Determination of true density of refractory materials and physical test methods for refractory materials
|
2013-1-1 澳大利亚标准协会 |
| ASTM C135-96(2022) 试验 |
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
|
2022-02-01 美国材料与试验协会 |
| ASTM C914-09(2015) Test Method |
Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
体积 耐火制品 |
2009 美国材料与试验协会 |
| ASTM D2638-06 Test Method |
Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
煅烧石油焦 石油焦 |
2006 美国材料与试验协会 |
| ASTM RR-C08-1013 1998 试验 |
C0604-用气体比较比重瓶测定耐火材料真比重的标准测试方法 C0604-Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
|
1998 美国材料与试验协会 |
| BS EN 17189:2024 试验/规范 |
从废旧轮胎(ELT)获得的材料 粒状和粉末的真实密度测定 基于水体积法的方法 Materials obtained from End-of-Life Tyres (ELT). Determination of the true density of granulates and powders. Method based on water pycnometry
|
2024-12-31 英国标准学会 |
| BS EN 623-2:1993(1999) 试验 |
先进技术陶瓷 整体陶瓷 一般性能和织构性能 第2部分:密度和孔隙率的测定 Advanced technical ceramics — Monolithic ceramics — General and textural properties — Part 2 : Determination of density and porosity
体积密度 表观孔隙率 |
1999-01-01 英国标准学会 |
| BS EN 993-2:1995(2004) 试验 |
Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density
|
2004-01-01 英国标准学会 |
| CAS 105-2004 规范 |
Calcined petroleum coke
煅烧石油焦 |
2004-01-05 协会标准-中国标准化协会 |
| CNS 620-1998 试验 |
Method for determination of true density of refractory materials
比重瓶 |
1998-12-29 台湾地方标准 |
| DANSK DS/EN 17189:2025 |
从报废轮胎 (ELT) 中获得的材料 确定颗:头勰┑恼媸得芏 基于水比重瓶法 Materials obtained from End-of-Life Tyres (ELT) – Determination of the true density of granulates and powders – Method based on water pycnometry
|
2025-01-03 丹麦标准化协会 |
| DIN 51918:2018-07 试验 |
Testing of carbonaceous materials - Determination of bulk density and the open porosity
开孔孔隙率 碳和石墨材料 |
2018-07 德国标准化学会 |
| DIN 51932:2010-06 试验标准 |
Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
碳素材料 螺纹孔 |
2010-06 德国标准化学会 |
| DIN EN 12697-5:2019 试验标准 |
Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
|
2019-03-01 德国标准化学会 |
| DIN EN 17189:2025 |
从报废轮胎 (ELT) 中获得的材料 颗:头勰┱媸得芏鹊牟舛 基于水比重瓶法 Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry; German version EN 17189:2024
|
2025-02-01 德国标准化学会 |
| DIN EN 17189:2025-02 |
从报废轮胎(ELT)中获得的材料 颗:头勰┱媸得芏鹊牟舛 基于水比重瓶法 Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
|
2025-02-01 德国标准化学会 |
| DIN EN 993-1:2019 试验 |
致密成型耐火制品的试验方法 第1部分:体积密度、表观孔隙率和真孔隙率的测定 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
致密成型耐火制品 |
2019-03-01 德国标准化学会 |
| GB 13268-1991 试验方法标准 |
Atmospheric test dust standard sample loess dust
粒径分布 |
1991-05-03 国家市场监督管理总局 |
| GB 13269-1991 试验/规范 |
Atmospheric test dust standard sample coal fly ash
|
1991-05-03 国家市场监督管理总局 |
| GB/T 13269-1991 HB |
Atmospheric Air--Test Dust Standard Sample--Fly Ash
粒径分布 |
1991-11-14 国家市场监督管理总局 |
| GB/T 23561.2-2009 试验 |
煤和岩石物理力学性质测定方法.第2部分:煤和岩石真密度测定方法 Methods for determining the physical and mechanical properties of coal and rock.Part 2:Methods for determining the true density of coal and rock
岩石 |
2009-04-08 国家市场监督管理总局 |
| GB/T 24586-2009 试验 |
Iron ores.Determination of apparent density,true density and porosity
孔隙率 |
2009-10-30 国家市场监督管理总局 |
| GB/T 32158-2015 试验方法标准 |
Coal-based needle coke
|
2015-10-09 国家市场监督管理总局 |
| GB/T 5071-2013 试验 |
Refractory materials.Determination of true density
|
2013-09-06 国家市场监督管理总局 |
| GB/T 9966.3-2020 试验 |
天然石材试验方法 第3部分:吸水率、体积密度、真密度、真气孔率试验 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
体积密度 |
2020-03-06 国家市场监督管理总局 |
| GOST 12730.1-2020 试验 |
Concretes. Methods of determination of density
|
2020-11-30 俄罗斯标准局 |
| GOST 25732-1988 试验 |
铁矿和锰矿、精矿、烧结矿和球团矿.实际、容积堆积密度及孔隙度测定法 Iron and manganese ores, concentrates, agglomerates and pellets. Methods for determination of real, middle, bulk density and porosity
体积密度 孔隙度 |
1988 俄罗斯标准局 |
| GOST 32722-2014 试验 |
Automobile roads of general use. Natural and crushed sand. Determination of the true density
天然砂 机制砂 |
2014 俄罗斯标准局 |
| GOST 32763-2014 试验 |
Automobile roads of general use. Mineral powder. The method of determining the true density
|
2014 俄罗斯标准局 |
| GOST R 54571-2023 试验标准 |
Magnesial-quarts proppants. Sрeсifiсations
支撑剂 |
2023-07-24 俄罗斯标准局 |
| GOST R 56300-2014 试验 |
Refractories and refractory raw materials. Methods of true density determination
比重瓶 |
2014 俄罗斯标准局 |
| IRAM 10602:2013 试验 |
岩土工程 岩石中真密度、表观密度、孔隙率、吸水率及相关特性的测定方法 Geotechnics. Methods for the determination of real density, apparent density, porosity, water absorption and related properties in rocks.
孔隙度 岩石 |
2013-05-30 阿根廷标准化研究所 |
| ISO 9088:1997 试验 |
铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度 Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method
阴极块 预焙阳极 |
1997-03 国际标准化组织 |
| JB/T 5893.5-1991 试验 |
Raw materials of electrotechnical porcelain Test method of physical property
|
1991-10-24 行业标准-机械 |
| JB/T 8133.15-2013 试验 |
Test method for physical-chemical properties of electrical carbon product.Part 15:Porosity
|
2013-04-25 行业标准-机械 |
| LST EN 17189:2025 |
回收废旧轮胎(ELT)材料 粒料和粉末的真密度测定 基于水比重瓶法 Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
|
2025-02-14 立陶宛标准局 |
| NEMA CG 2-2004 试验 |
Powdered Graphite
松装密度 |
2004-01-01 (美国)全国电气制造商协会 |
| NF B40-301*NF EN 993-2:1995 试验 |
Methods of test for dense shaped refractory products. Part 2 : determination of true density.
|
1995-05-01 法国标准化协会 |
| NF EN 17189:2024 |
从报废轮胎 (ELT) 中获得的材料 确定颗:头勰┑恼媸得芏 基于水比重瓶法 Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
|
2024-12-01 法国标准化协会 |
| NF P18-650-7*NF EN 1097-7:2008 试验 |
集料的物理和机械特性试验.第7部分:填充物颗粒密度的测定.比重瓶法 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.
|
2008-06-01 法国标准化协会 |
| QB/T 1010-2015 试验 |
Test method for true density of ceramic material and pigment
陶瓷材料 |
2015-04-30 行业标准-轻工 |
| SS-EN 17189:2024 |
从报废轮胎(ELT)中获得的材料 粒状物和粉末真密度的测定 基于水比重计法的方法 Materials obtained from end of life tyres (ELT) — Determination of the true density of granulates and powders — Method based on water pycnometry
|
2024 瑞典标准研究所 |
| T/CSTM 00351-2021 规范标准 |
Diatomaceous treatment agent for adsorbing and cleaning sparingly soluble or slightly soluble suspended solids in industrial wastewater
振实密度 |
2021-07-26 中国团体标准 |
| T/CSTM 00553-2022 试验 |
Method for determination of porosity of lightweight porous material
孔隙率 视密度 |
2022-01-25 中国团体标准 |
| UNI EN 17189:2025 |
废旧轮胎材料(PFU) 确定颗粒的真实密度 基于使用水比重计的方法 Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
|
2025-02-27 意大利统一标准化组织 |
| UOP 1025-2018 试验 |
Density of Viscous Liquids and Semi-Solid Hydrocarbons by Nitrogen Displacement
|
2018-01-01 环球油品公司(美国) |
| UOP 851-2008 试验 |
Density of Powders and Solids by Helium Displacement
|
2008-01-01 环球油品公司(美国) |
| YB/T 6194-2024 试验 |
Measurement of True Density of Needle Coke by Kerosene Displacement Method
煤油 |
2024-10-24 行业标准-黑色冶金 |
| YS/T 587.10-2016 试验 |
炭阳极用煅后石油焦美利体育登录入口官网方法 第10部分:振实密度的测定 Testing methods for calcined petroleum coke for carbon anodes - Part 10: Determination of tap density
振实密度 |
2016-04-05 行业标准-有色金属 |
| YS/T 587.9-2006 试验 |
炭阳极用煅后石油焦美利体育登录入口官网方法.第9部分:真密度的测定 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
密度瓶 煅后石油焦 |
2006-05-25 行业标准-有色金属 |
| YS/T 625-2012 规范 |
Calcined petroleum coke for prebaked anode
|
2012-12-28 行业标准-有色金属 |
| YS/T 63.9-2012 试验 |
铝用炭素材料美利体育登录入口官网方法.第9部分:真密度的测定.氦比重计法 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method
|
2012-05-24 行业标准-有色金属 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-05-30 22:33