美利体育登录入口官网

测定浸渍剂对漆包线基材粘结强度的试验方法

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

热喷镀.热喷镀层的特征和检验

Thermal spraying - Characterization and testing of thermally sprayed coatings

精细陶瓷（先进陶瓷、先进技术陶瓷） 测定陶瓷涂层结合强度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining bonding strength of ceramic coatings

滑动轴承 金属多层滑动轴承 轴承金属层厚度大于或等于 2mm 的粘合破坏性测试

Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm

木材胶粘剂和胶合木接缝的检验 测定胶合板(胶合板和夹芯板)破坏强度的剪切和剥离试验

Testing of wood adhesives and glued wood joints; shear and delamination tests for determining the failing strength of plywood bonds (plywood and coreboard)

胶粘带.热硬化中胶粘带粘着强度测量

Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing; German version EN 12032:1996

胶粘带.热硬化后胶粘带粘着强度测量

Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing; German version EN 12033:1996

航空航天 - 非金属材料 - 结构胶粘剂 - 测试方法 - 第1部分：单搭剪切试验

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear

浸渍剂对漆包线衬底粘结强度测定的试验方法

Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006); German version EN 61033:2006

牙科. 兼容性试验. 第1部分: 金属陶瓷系统(ISO 9693-1-2012); 德文版本EN ISO 9693-1-2012

Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012); German version EN ISO 9693-1:2012

滑动轴承 多层金属滑动轴承 第2部分：厚度大于或等于2 mm的轴承金属层的结合强度破坏性试验

Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2 mm

滑动轴承.多层金属滑动轴承.第2部分:厚度大于或等于2 mm的轴承金属层的结合强度破坏性试验(ISO 4386-2-2012)

Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2 mm (ISO 4386-2:2012)

滑动轴承 金属多层滑动轴承 第 2 部分：轴承金属层厚度 >= 2 mm 的粘结破坏性测试

Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2 mm

陶瓷金属化层的美利体育登录入口官网方法

Testing methods for ceramic metallization layers

真空技术.真空镀膜层结合强度测量方法.胶带粘贴法

Vacuum technology.Methods of bouding strength measurement for vacuum coating film.Measuring adhesion by tape test

陶瓷覆层结合强度试验方法

Test method for determining bonding strength of ceramic coatings

输送带. 构成要件间的测定

Conveyor belts. Determination of between constitutive elements

滑动轴承.多层滑动轴承防磨层与基体连接强度的破坏性试验

Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond strength between the bearing metal and the backing

技术诊断 圆柱面堆焊声学质量控制一般要求

Technical diagnostics. Acoustic quality control of surfacing of cylindrical surface. General requirements

热喷涂热障涂层质量检验

Thermal spray thermal barrier coating quality inspection

热喷涂.热喷涂层的表征和试验

Thermal spraying - Characterization and testing of thermally sprayed coatings

滑动轴承.多层金属滑动轴承.第2部分:厚度大于或等于2 mm的轴承金属层的结合强度破坏性试验

Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses 2 mm

金属覆盖层 铜 锡合金电镀层

Metallic coating. Electroplated coatings of copper-tin alloys

滑动轴承 合金层厚度0.5mm～2.0mm的青铜-钢背双金属板材结合强度的剪切试验方法

Shear Test Method for Bonding Strength of Bronze-Steel Back Bimetallic Plates with Alloy Layer Thickness of 0.5 mm to 2.0 mm for Sliding Bearings

鞋类装饰性附件结合强度试验方法

Test method for bonding strength of decorative accessories for footwear

汽车发动机 轴瓦双金属结合强度破坏性试验方法

Destructive test method for bimetal bond strength of automobile engine bearing

低锡青铜镀层技术条件

Technical conditions for low-tin bronze coating

涂层 碳化钨-钴涂层 爆炸工艺

Coating@ Tungsten Carbide-Cobalt Coating@ Detonation Process

金属覆盖层.光学仪器用涂漆层规范

Metal coating. Specifications for paint coatings of optical instrument

钛金属复合板结合强度试验方法

Test method for bond strength of titanium metal composite plate