材料去除水分后的单位体积质量指标。土壤学中用于评估压实度(ρd),测定时需在105℃条件下烘至恒重,计算公式为:干密度=干质量/体积。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AENOR UNE-EN 13286-4:2022 |
松散及液压结合混合料 第4部分:实验室参考密度和含水率的试验方法 振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
含水量 |
2022-09-07 西班牙标准化协会 |
| AS 1289.5.1.1:2017 试验 |
工程用土壤测试方法 方法4.1.1:土壤压实与密度试验—标准压实功下土壤干密度与含水量关系的测定 AS 1289.4.1.1: Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
|
2017-01-01 澳大利亚标准协会 |
| AS 1289.5.2.1:2003 试验 |
给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort
含水量 |
2003 澳大利亚标准协会 |
| AS 1289.5.2.1:2017 试验 |
工程用土壤试验方法 方法3.2.1: 土壤压实与密度试验 - 改良压实功下土壤干密度/含水量关系的测定 Methods of testing soils for engineering purposes - Method 3.2.1: Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort
|
2017-1-1 澳大利亚标准协会 |
| AS 4133.2.1.1:2005(R2016) 试验标准 |
工程用岩石的试验方法 岩石孔隙度和密度试验 岩石孔隙度和干密度的测定 饱和法和卡规法 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques
孔隙率 |
2016 澳大利亚标准协会 |
| AS 4133.2.1.2:2005(R2016) 试验标准 |
工程用岩石的试验方法 岩石孔隙度和密度试验 岩石孔隙度和干密度的测定 饱和法和卡规法 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques
孔隙率 岩石样品 |
2016 澳大利亚标准协会 |
| ASTM D1557-12(2021) 试验 |
用改良作用力(56000 ft-lbf/ft3(2700 kN-m/m3)测定土壤实验室压实特性的标准试验方法 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
|
2021-07-01 美国材料与试验协会 |
| ASTM D1883-07e2 Test Method |
Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
加州承载比 |
2007 美国材料与试验协会 |
| ASTM D4531-23 试验 |
Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
泥炭 |
2023-11-01 美国材料与试验协会 |
| ASTM D7263-21 试验标准 |
Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
|
2021-01-01 美国材料与试验协会 |
| ASTM RR-C27-1000 1981 试验 |
C0948-玻璃纤维混凝土薄断面的干湿容重、吸水率、显气孔率试验 C0948-Test for Dry and Wet Bulk Density, Water Absorption, Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
孔隙率 玻璃纤维增强混凝土 |
1981 美国材料与试验协会 |
| BS 1377-4:1990 试验 |
Methods of test for soils for civil engineering purposes - Compaction-related tests
加州承载比 压实 |
1990-08-31 英国标准学会 |
| BS 1377-4:1990(2002) 试验 |
Methods of test for Soils for civil engineering purposes — Part 4 : Compaction - related tests
加州承载比 压实 |
2002 英国标准学会 |
| BS EN 1170-6:1998 试验 |
预制混凝土制产品.玻璃纤维增强水泥的测试方法.浸渍时水吸收性的测定和干密度的测定 Precast concrete products - Test method for glass-fibre reinforced cement - Determination of the absorption of water by immersion and determination of the dry density
玻璃纤维增强水泥 |
1998-03-15 英国标准学会 |
| BS EN 13286-2:2010(2012) 试验 |
松散的和液力粘合的混合料.实验室参考密度和水含量测定的试验方法.普氏击实试验 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
水含量 |
2010-01-01 英国标准学会 |
| BS EN 678:1994(2000) 试验 |
Determination of the dry density of autoclaved aerated concrete
蒸压加气混凝土 |
2000-01-01 英国标准学会 |
| BS EN 992:1996(1999) 试验 |
Determination of the dry density of lightweight aggregate concrete with open structure
|
1999-01-01 英国标准学会 |
| BS EN ISO 12570:2000+A2:2018 试验 |
Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
|
2018-04-30 英国标准学会 |
| BS EN ISO 2738:2000 试验 |
烧结金属材料(硬金属除外).渗透性烧结金属材料.密度、油含量和开口孔隙度的测定 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
开孔率 |
2000-01-15 英国标准学会 |
| DB14/T 863-2014 规范标准 |
foam ceramic board
导热系数 |
2014-05-26 山西省标准 |
| DIN 25413-1 E:2012-02 试验 |
Classification of shielding concretes by proportion of elements; neutron shielding
|
2012-02 德国标准化学会 |
| DIN 25413-1:2013-04 试验 |
Classification of shielding concretes by proportion of elements - Part 1: Neutron shielding
|
2013-04 德国标准化学会 |
| DIN EN 1097-6:2013 试验 |
集料的机械和物理性能试验.第6部分:颗粒密度和吸水率的测定.德文版本EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2013
|
2013-09 德国标准化学会 |
| DIN EN 13286-1 E:1998-10 试验 |
未结合和水力结合的混合物 第1部分:实验室参考密度和水含量的测试方法 介绍、一般要求和取样(草案) Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
|
1998-10 德国标准化学会 |
| DIN EN 13286-3:2003 试验 |
松散的和液力粘合的混合料.第3部分:实验室参考密度和水含量的试验方法.有受控参数的振实法 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
|
2003-07 德国标准化学会 |
| DIN EN 13286-4 E:1998-10 试验 |
未结合和水力结合的混合物 第4部分:实验室参考密度和水含量的测试方法 振动锤(草案) Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
振动锤 |
1998-10 德国标准化学会 |
| DIN EN 13286-4:2003 试验 |
松散的和液力粘合的混合料.第4部分:实验室参考密度和水含量的试验方法.振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer; German version EN 13286-4:2003
含水率 |
2003-07 德国标准化学会 |
| DIN EN 13286-4:2020 试验标准 |
未结合和水力结合的混合物 第4部分:实验室参考密度和水含量的测试方法 振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer; German and English version prEN 13286-4:2020
振动锤 混合物 |
2020-12-01 德国标准化学会 |
| DIN EN 13286-4:2022 |
未结合和水力结合的混合物 第4部分:实验室参考密度和水含量的测试方法 振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
含水量 |
2022-02-01 德国标准化学会 |
| DIN EN 13286-4:2022-02 试验 |
未粘合和水硬性粘合混合物第4部分:实验室参考密度和含水量的测试方法振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer; German version EN 13286-4:2021
含水量 |
2022-02 德国标准化学会 |
| DIN EN 13286-5:2003 试验 |
松散的和液力粘合的混合料.第5部分:实验室参考密度和水含量的测试方法.振动台 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table; German version EN 13286-5:2003
振动台 试模 |
2003-07 德国标准化学会 |
| DIN EN 14227-5:2013-08 规范 |
水硬性粘结混合物 规范 第5部分:水硬性道路粘结剂粘结粒状混合物 Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures; German version EN 14227-5:2013
水硬性结合混合料 |
2013-08 德国标准化学会 |
| DIN EN 1602:2013 试验 |
建筑物用隔热产品.表观密度测定.德文版本EN 1602-2013 Thermal insulating products for building applications - Determination of the apparent density; German version EN 1602:2013
热绝缘材料 |
2013-05 德国标准化学会 |
| DIN EN 771-4:2005 规范 |
Specifications for wall blocks – Part 4: Aerated concrete blocks
砌块 蒸压加气混凝土砌块 |
2005 德国标准化学会 |
| DIN EN ISO 17892-2 E:2013-06 试验 |
岩土工程调查和测试 土壤的实验室测试 第2部分:体积密度的测定(草案) Geotechnical Investigations and Laboratory Testing of Test Soils Part 2: Determination of Bulk Density (Draft)
土壤密度 |
2013-06 德国标准化学会 |
| DIN EN ISO 17892-2:2015 试验 |
岩土工程调查和测试 土壤的实验室测试 第2部分:体积密度的测定(ISO 17892-2:2014);德文版 EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
|
2015-03 德国标准化学会 |
| DIN EN ISO 1927-3:2013-03 试验 |
Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012
烧结 |
2013-03 德国标准化学会 |
| DL/T 5422-2009 试验 |
Test code for extruded-curb concrete in the concrete-faced rockfill dam
含水率 |
2009-07-22 行业标准-能源电力规划 |
| EN 13286-4:2003 试验 |
未结合和水硬结合混合物 第41部分:测定水硬结合混合物抗压强度的试验方法 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
|
2003 欧洲标准化委员会 |
| GB 11968-2006 试验规范 |
Autoclaved aerated concrete blocks
抗冻性 蒸压加气混凝土砌块 |
2006-06-20 国家市场监督管理总局 |
| GB/T 11968-2020 试验/规范 |
Autoclaved aerated concrete blocks
蒸压加气混凝土砌块 |
2020-09-29 国家市场监督管理总局 |
| GB/T 11969-2020 试验 |
Test methods of autoclaved aerated concrete
蒸压加气混凝土 |
2020-09-29 国家市场监督管理总局 |
| GB/T 20313-2006 试验 |
Hygrothermal performance of building materials and produts. Determinaton of moisture content by drying at elevated temperature
|
2006-07-19 国家市场监督管理总局 |
| ISO 17892-2:2014 试验方法标准 |
岩土工程勘察和测试. 土壤的实验室试验. 第2部分: 容积密度的测定 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
|
2014-12 国际标准化组织 |
| ISO 2738:1999 试验 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
开孔率 |
1999-11 国际标准化组织 |
| JIS A 1210:1990 试验标准 |
Test method for soil compaction using a rammer
压实 |
1990-06-12 日本工业标准调查会 |
| JIS A 1214:1990 试验标准 |
Test method for soil density by the sand replacement method
土壤密度 |
1990-01-01 日本工业标准调查会 |
| LST EN 13286-4:2022 |
未结合料与液压结合料混合物 第4部分:测定实验室参考密度和含水量试验方法 振动夯 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
含水量 |
2022-01-31 立陶宛标准局 |
| SIS-CEN ISO/TS 17892-2:2005 试验 |
岩土工程勘察与试验 土壤实验室试验 第2部分:细颗粒土密度的测定 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil (ISO/TS 17892-2:2004)
|
2005 瑞典标准研究所 |
| SS-EN ISO 17892-2:2014 试验标准 |
地质勘察与试验 土壤的实验室试验 第2部分:密实度测定(ISO 17892-2:2014) Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
体积密度 |
2014 瑞典标准研究所 |
| T/ZZB 0975-2019 规范标准 |
Ceramsite aerated concrete block
|
2019-02-22 中国团体标准 |
| UNE-EN 13286-4:2022 |
未结合和水硬结合的混合物 第4部分:实验室参考密度和含水量的测试方法 振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
含水量 |
2022-09-07 西班牙标准化协会 |
| UNI EN 13286-4:2022 |
非粘结和液压粘结混合物 第4部分:实验室参考密度和水含量的试验方法 振动锤 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
含水量 |
2022-01-13 意大利统一标准化组织 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-01 23:38