美利体育登录入口官网

石油计量标准手册第 11 章 物理特性数据第 5 节 密度/重量/体积内换算第3部分 15°C 下的绝对密度换算（第一版）

Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 3 - Conversions for Absolute Density at 15 °C (First Edition)

用沸水法测定烧过的耐火砖和异型砖的表观多孔性,吸水性,表观比重及松密度的测试方法

Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

用真空压力法测定成型耐火材料表观空隙率、吸水性、表观比重和体密度的标准试验方法

Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

皮革表观密度的标准试验方法

Standard Test Method for Apparent Density of Leather

通过铝工业用制造的阳极和阴极碳物理测量测定表观密度的标准试验方法

Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

使用组合真空饱和和快速浸没测定细 粗和混合聚集体的相对密度和吸收的标准测试方法

Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

土壤改良剂和生长介质. 量值的测定

Soil improvers and growing media. Determination of a quantity

涂料和其它相关制品应用前钢基质的预处理. 喷非金属清理磨料规格. 铜精炼厂炉渣

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag

在涂覆油漆和相关产品之前准备钢基材 非金属喷砂清理磨料规范 铁铝榴石石榴石

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet

生产铝用碳质材料——冷、温捣固糊的制备及压实后松散密度测定方法

Production of aluminum carbonaceous materials - Cold and tepid ramming pastes, preparation of un-baked test specimens, and determination of apparent density after compaction

圆柱形软木塞.物理试验.成团软木塞质量和表观密度的测定

Cylindrical cork stoppers - Physical tests - Determination of mass and apparent density for agglomerated cork stoppers

炭素材料的试验 圆柱形机加工电极体积密度的测定

Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes

沥青混合物 试验方法 第6部分：沥青样品堆积密度的测定

Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens

天然石料检验方法.测定实际和表观密度以及总开放式孔隙率

Natural stone test method - Determination of real density and apparent density, and of total and open porosity; English version of DIN EN 1936:2007-02

天然石材测试方法-真密度和表观密度以及总孔隙率和开孔率的测定

Natural stone test method - Determination of real density and apparent density, and of total and open porosity; German version EN 1936:2006

涂覆前钢的表面准备.金属喷丸材料要求.第4部分:低碳铸钢喷丸

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997

涂漆和相关产品前钢基材的制备 金属喷砂清理磨料规范 第4部分：低碳铸钢丸（ISO 11124-4:2018）

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018)

涂装油漆和相关产品前钢基材的制备 金属喷砂清理磨料规范 第4部分：低碳铸钢丸

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018); German version EN ISO 11124-4:2018

使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第4部分:表观密度测定

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997

涂装油漆和相关产品前钢基材的制备 金属喷砂清理磨料的试验方法 第4部分：表观密度的测定（ISO 11125-4:2018）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018)

应用涂料和相关产品前钢基体的准备. 非金属喷砂清理磨料的试验方法. 第3部分: 表观密度的测定(ISO 11127-3-2020); 德文版 EN ISO 11127-3-2021

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2020); German version EN ISO 11127-3:2021

皮革 物理和机械试验 视密度和单位面积质量的测定

Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area

未模制的粒状耐火材料 吸水、表观密度和外露孔隙的测定法

Refractories unshaped granular. Methods for determination of water absorption, apparent density and open porosity

固体矿物燃料. 真密度和表观密度的测定

Solid mineral fuel. Determination of true and apparent density

"耐火材料. 松密度, 表观和真实孔隙度, 吸水率的测定方法"

Refractories. Method for determination of bulk density, apparent and true porosity, water absorption

高频铁氧体及其制品 测量假密度的方法

Microwave ferrite devices and products made of them. Methods for measuring apparent density

橡塑鞋微孔材料视密度试验方法

Cellular material for rubber-plastics shoes.Determination of apparent density

植物用农药 水分散粒剂压块后表观密度的测定

Pesticides for vegetal protection. Determination of apparent density after tapping, of water dispersible granules.

耐火材料 致密和轻质耐火砖视密度测定方法

Refractory Materials. Method for the Determination of Apparent Density of Dense and Insulating (Lightweight) Refractory Bricks

洗衣用洗涤剂与肥皂 粉末洗涤产品 预定量包装不透明容器中填充比的测定 其内容以质量表示

Detergents and soaps. Determination of the filling ratio of standard capacity prepacks whose contents are indicaled by weight.

涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite

涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density

铝生产用碳素材料 焙烧阳极和阴极碳块 第2部分:用静流法测定表观密度和开口孔隙率

Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method

铝生产用碳质材料.冷和微热捣实糊料.非烤试验样品的制备和压缩后表观密度的测定

Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction

二氧化铀粉末.表观密度和堆积密度的测定

Uranium dioxide powder - Determination of apparent density and tap density

圆柱形软木塞.物理试验.第2部分:成团软木塞质量和表观密度的测定

Cylindrical cork stoppers - Physical tests - Part 2: Determination of mass and apparent density for agglomerated cork stoppers

塑料.可由专用浇口中注入的材料表观密度的测定

Plastics -- Determination of apparent density of material that can be poured from a specified funnel

电气用纸 第2部分：试验方法（IEC 60554-2:2001）

Cellulosic papers for electrical purposes. Part 2: Methods of test (IEC 60554-2:2001)

涂装及关联产品前钢基材的制备 金属磨料喷射清理试验方法 第4部分：表观密度的测定（ISO 11125-4:2018）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018)

涂漆及相关产品用钢基表面处理 磨料喷清理技术要求 第4部分：炼焦炉炉渣（ISO 11126-4:2018）

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)

油漆及相关产品涂覆前钢基材的制备 非金属磨料喷砂清理技术要求 第6部分：铁和钢的熔炼高炉矿渣（ISO 11126-6:2018）

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)

涂漆和涂料用金属表面预处理 非磨料喷清理 技术条件 第7部分 熔融氧化铝（ISO 11126-7:2018）

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:2018)

涂漆前基材的准备 喷砂非金属磨料的技术要求 第8部分：橄榄石（ISO 11126-8:2018 2018-11修订版）

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11)

绝缘耐火产品.第2部分:成型产品分类

Insulating refractory products. Part 2 : classification of shaped products.

密实成型耐火制品试验方法.第17部分:真空水银法测定粒状材料松密度

Methods of test for dense shaped refractory products. Part 17 : determination of bulk density of granular materials by the mercury method with vacuum.

皮革.物理和机械试验.视密度的测定

Leather-Physical and mechanical tests-Determination of apparent density

碎石试验方法 第1部分：表观密度和吸水率的测定

Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption

涂装油漆和相关产品前钢材表面处理 金属喷砂清理磨料的试验方法 第4部分：表观密度的测定（ISO 11125-4:1993）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993)

皮革 物理和机械测试 显密度和单位面积质量的测定（ISO 2420:2017）

Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)

二氧化铀粉末 表观密度和振实密度的测定

Uranium dioxide powder - Determination of apparent density and tap density (ISO 9161:2019)

二氧化铀粉末 表观密度和振实密度的测定

Uranium dioxide powder - Determination of apparent density and tap density (ISO 9161:2004, IDT)

轻质多孔材料孔隙率测定方法

Method for determination of porosity of lightweight porous material

铁路通信信号不燃型菱镁复合材料电缆槽

Non-combustible magnesite composite material cable tray for railway communication signal