以平方厘米每克表示的水泥总表面积,反映催化剂活性和分散能力的关键参数。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AASHTO T 153-2025 试验标准 |
Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus
|
2025-01-01 美国公路与运输员工协会 |
| AASHTO T 98M/T 98-2012(R2020) 试验标准 |
Standard Method of Test for Fineness of Portland Cement by the Turbidimeter
波特兰水泥 浊度计 |
2020 美国公路与运输员工协会 |
| ACI 549.1R-2018 规范 |
Design Guide for Ferrocement
体积分数 |
2018-09-01 美国混凝土学会 |
| ASTM B922-02 Test Method |
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
物理吸附 |
2002 美国材料与试验协会 |
| ASTM B922-02(2008) Test Method |
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
物理吸附 |
2002 美国材料与试验协会 |
| ASTM C1069-09(2014) Test Method |
Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
氧化铝 石英 |
2009 美国材料与试验协会 |
| ASTM C1274-10 Test Method |
Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
BET方法 先进陶瓷 |
2010 美国材料与试验协会 |
| ASTM C1274-12 Test Method |
Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
先进陶瓷 物理吸附 |
2012 美国材料与试验协会 |
| ASTM C204-11 Test Method |
Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
|
2011 美国材料与试验协会 |
| ASTM C204-23 试验 |
Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
滤纸 |
2023-04-01 美国材料与试验协会 |
| ASTM C819-77 试验规范 |
Method for determination of specific surface area of carbon or graphite
石墨 碳 |
1977 美国材料与试验协会 |
| ASTM D1993-03(2013)e1 Test Method |
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
沉淀水合二氧化硅 |
2003 美国材料与试验协会 |
| ASTM D3663-03(2008) Test Method |
Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
催化剂 载体 |
2003 美国材料与试验协会 |
| ASTM D3766-24a 术语 |
Standard Terminology Relating to Catalysts and Catalysis
催化剂载体 |
2024-02-01 美国材料与试验协会 |
| ASTM D4315-21(2025) 试验 |
Standard Test Methods for Rubber Compounding Material—Zinc Oxide
氧化锌 筛余物 |
2025-11-01 美国材料与试验协会 |
| ASTM D4567-03(2008) Test Method |
连续流动法单点测定用氮吸附的催化剂和催化剂载体比表面积的标准试验方法 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
|
2003 美国材料与试验协会 |
| ASTM D4567-03(2013) Test Method |
连续流动法单点测定用氮吸附的催化剂和催化剂载体比表面积的标准试验方法 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
|
2003 美国材料与试验协会 |
| ASTM D4567-25 试验 |
标准测试方法:使用连续流动法通过氮吸附确定催化剂及载体的单点特定表面积 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
催化剂载体 |
2025-01-29 美国材料与试验协会 |
| ASTM D4780-23 试验 |
Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
催化剂 |
2023-10-15 美国材料与试验协会 |
| ASTM D5604-21 试验方法标准 |
用单点B.E.T.氮吸附法测定沉淀二氧化硅表面积的标准试验方法 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
沉淀二氧化硅 |
2021-11-01 美国材料与试验协会 |
| ASTM D6556-17 Test Method |
Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
碳黑 |
2017 美国材料与试验协会 |
| ASTM D6845-02 Test Method |
沉淀的水合硅石的标准试验方法.溴化十六烷基三甲铵(CTAB)表面区域 Standard Test Method for Silica, Precipitated, Hydrated8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
沉淀二氧化硅 |
2002 美国材料与试验协会 |
| ASTM D6845-02(2008) Test Method |
Standard Test Method for Silica, Precipitated, Hydratedx2014;CTAB (Cetyltrimethylammonium Bromide) Surface Area
沉淀二氧化硅 |
2002 美国材料与试验协会 |
| ASTM D8325-20 规范 |
Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
孔隙率 核石墨 |
2020-06-01 美国材料与试验协会 |
| ASTM RR-B09-1026 2020 试验 |
B0922-Test Method for Metal Powder Specific Surface Area by Physical Adsorption
|
2020 美国材料与试验协会 |
| ASTM RR-D32-1019 1986 试验 |
D4567-连续流动法利用氮气吸附单点测定催化剂和催化剂载体比表面积的测试方法 D4567-Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
催化剂 |
1986 美国材料与试验协会 |
| BS EN 12913:2012 规范 |
Products used for treatment of water intended for human consumption. Powdered diatomaceous earth
硅藻土 |
2013-01-31 英国标准学会 |
| BS EN 13753:2009 规范 |
Products used for treatment of water intended for human consumption - Granular activated alumina
堆积密度 |
2009-06-30 英国标准学会 |
| BS EN 15029:2012 规范 |
Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide
有效粒径 |
2013-01-31 英国标准学会 |
| BS EN 725-6:1996(1999) 试验 |
Advanced technical ceramics — Methods of test for ceramic powders — Part 6 : Determination of the specific surface area
|
1999-01-01 英国标准学会 |
| BS EN ISO 12800:2019 规范 |
Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
|
2019-06-30 英国标准学会 |
| BS ISO 21340:2017 试验标准 |
Test methods for fibrous activated carbon
|
2017-11-28 英国标准学会 |
| BS ISO 23604:2022 试验 |
Method of determining specific surface area of coal
|
2022-12-31 英国标准学会 |
| BS ISO 4652:2020 试验 |
Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
|
2020-08-31 英国标准学会 |
| BS ISO 8008:2005(2006) 试验 |
Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption
|
2006 英国标准学会 |
| DB13/T 2768.4-2018 试验 |
石墨烯粉体材料美利体育登录入口官网方法 第4部分:比表面积、孔容和孔径BET法 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method
|
2018-07-16 河北省标准 |
| DB22/T 2092-2014 试验 |
Technical guidelines for the application of pozzolanic materials in highway engineering
|
2014-06-30 吉林省地方标准 |
| DB23/T 2313-2019 试验标准 |
Determination of specific surface area of graphene materials Nitrogen adsorption method
石墨烯材料 |
2019-03-19 黑龙江省地方标准 |
| DB44/T 1654-2015 |
Nanotechnology - Characterization and Measurement of Powdered Nanoparticles
X射线衍射法 纳米颗粒 |
2015-09-07 广东省标准 |
| DB63/T 2344-2024 术语/定义 |
Technical specification for application of lead-zinc slag powder for mine filling
活性指数 |
2024-10-17 青海省标准 |
| DIN 66126 E:2014-03 试验 |
Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
孔隙率 |
2014-03 德国标准化学会 |
| DIN 66126:2015 试验 |
Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
渗透性 |
2015-08 德国标准化学会 |
| DIN 66126:2015-08 试验标准 |
Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
|
2015-08 德国标准化学会 |
| DIN 66133:1993 试验 |
Determination of pore volume distribution and specific surface area of solids by mercury intrusion
|
1993-06 德国标准化学会 |
| DIN 66135-2:2001 试验 |
Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
吸附等温线 |
2001-06 德国标准化学会 |
| DIN 66135-2:2001-06 试验 |
颗粒表征 气体吸附微孔分析 第2部分:通过等温线比较进行评估 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
吸附等温线 |
2001-06 德国标准化学会 |
| DIN 66136-2:2007 试验 |
Determination of the degree of dispersion of metals using chemisorption - Part 2: Volumetric method
体积法 化学吸附 |
2007-01 德国标准化学会 |
| DIN 66136-2:2007-01 试验 |
Determination of the degree of dispersion of metals using chemisorption - Part 2: Volumetric method / Note: To be replaced by DIN 66136-2 (2022-12).
化学吸附 |
2007-01 德国标准化学会 |
| DIN 66136-4 E:2020-09 试验标准 |
使用化学吸附作用测定金属的分散度 第4部分:静态重量分析方法 Determination of the degree of dispersion of metals using chemisorption - Part 4: Static-gravimetric method
|
2020-09 德国标准化学会 |
| DIN 66136-4:2021-01 试验 |
Determination of the degree of dispersion of metals using chemisorption - Part 4: Static-gravimetric method
分散度 |
2021-01 德国标准化学会 |
| DIN CEN/TS 17510:2020-12 试验标准 |
从报废轮胎中获得的材料 粉末比表面积的测定 基于氪吸附的方法 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
|
2020-12 德国标准化学会 |
| DIN EN 13286-44:2003-09 试验 |
非粘结和水硬粘结混合物第44部分:测定玻璃化高炉矿渣α系数的试验方法 Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag; German version EN 13286-44:2003
脆性 |
2003-09 德国标准化学会 |
| DIN EN 13753:2009-07 规范 |
Products used for treatment of water intended for human consumption - Granular activated alumina; German version EN 13753:2009
振实密度 |
2009-07 德国标准化学会 |
| DIN EN 14369 E:2002-04 规范 |
Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina
振实密度 |
2002-04 德国标准化学会 |
| DIN EN 14369:2015 规范 |
人类用水处理制品.覆铁粒状活性铝;德文版本EN 14369-2015 Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina; German version EN 14369:2015
振实密度 |
2015-06 德国标准化学会 |
| DIN EN 14369:2015-06 试验 |
Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina; German version EN 14369:2015
粒径分布 |
2015-06 德国标准化学会 |
| DIN EN 15029:2013 规范 |
用于人类消费用水处理的产品. 氢氧化铁 (III); 德文版本EN 15029-2012 Products used for treatment of water intended for human consumption.Iron (III) hydroxide oxide; German version EN 15029:2012
|
2013-01 德国标准化学会 |
| DIN EN 196-6 E:2008-05 试验 |
Methods of testing cement - Part 6: Determination of fineness
细度 |
2008-05 德国标准化学会 |
| DIN EN 196-6 E:2017-05 试验标准 |
Methods of testing cement - Part 6: Determination of fineness
细度 |
2017-05 德国标准化学会 |
| DIN EN 196-6:2019-03 试验 |
Methods of testing cement - Part 6: Determination of fineness; German version EN 196-6:2018
|
2019-03 德国标准化学会 |
| DIN EN ISO 10070 E:2019-04 试验标准 |
金属粉末 通过在稳态流动条件下测量粉末床的空气渗透性来确定包络比表面积(草案) Determination of envelope specific surface area for metal powders by measuring the air permeability of the powder bed under steady-state flow conditions (Draft)
渗透性 |
2019-04 德国标准化学会 |
| DIN EN ISO 12800:2018 试验标准 |
核燃料技术 BET 法测量氧化铀粉末比表面积的指南(ISO 12800:2017) Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018
BET方法 吸附 |
2018-12-01 德国标准化学会 |
| DIN EN ISO 12800:2019-09 试验 |
Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
|
2019-09 德国标准化学会 |
| DIN EN ISO 17200 E:2019-07 试验标准 |
Nanoparticle Characterization and Measurement in Nanotechnology Powder Forms (Draft)
纳米颗粒 |
2019-07 德国标准化学会 |
| DIN EN ISO 17200:2020-12 试验标准 |
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
粉末 纳米颗粒 |
2020-12 德国标准化学会 |
| DIN EN ISO 18473-3:2019-12 试验标准 |
特殊应用的功能颜料和增量剂 第3部分:硅橡胶应用用气相二氧化硅 Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018); German version EN ISO 18473-3:2019
硅胶橡胶 |
2019-12 德国标准化学会 |
| DIN EN ISO 18757:2006 试验 |
精密陶瓷(高级陶瓷、高级工业陶瓷).BET法利用气体吸附来测定陶瓷粉末的比表面积 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); English version of DIN EN ISO 18757:2006
吸附等温线 精细陶瓷 |
2006-01 德国标准化学会 |
| DIN EN ISO 18757:2006-01 试验 |
精细陶瓷(先进陶瓷、先进技术陶瓷) 采用BET法通过气体吸附测定陶瓷粉末的比表面积 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005
吸附等温线 精细陶瓷 |
2006-01 德国标准化学会 |
| DIN ISO 9277 E:2012-11 试验 |
Determination of the specific surface area of solids by gas adsorption - BET method
吸附 物理吸附 |
2012-11 德国标准化学会 |
| DIN ISO 9277:2003-05 试验 |
Determination of the specific surface area of solids by gas adsorption - BET method
BET方法 吸附等温线 |
2003-05 德国标准化学会 |
| DIN ISO 9277:2014-01 试验 |
Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
吸附等温线 |
2014-01 德国标准化学会 |
| EN 196-6-22018 试验标准 |
Test methods for cement. Part 6: Determination of fineness
筛分法 |
2018-12-01 欧洲标准化委员会 |
| GB/T 10322.8-2009 试验/规范 |
Iron ores.Single-point determination of specific surface area.Nitrogen adsorption method
|
2009-10-30 国家市场监督管理总局 |
| GB/T 11107-2018 试验 |
Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method
粒度 |
2018-09-17 国家市场监督管理总局 |
| GB/T 13390-2008 试验 |
Metallic powder.Determination of the specific surface area.Method of nitrogen adsorption
|
2008-03-21 国家市场监督管理总局 |
| GB/T 14634.6-2010 试验 |
Test methods of rare earth three-band phosphors for fluorescent lamps.Part 6:Determination of specific surface area
|
2010-08-09 国家市场监督管理总局 |
| GB/T 1774-2009 试验 |
Superfine silver powder
粒径 |
2009-01-05 国家市场监督管理总局 |
| GB/T 20170.2-2006 试验 |
稀土金属及其化合物物理性能测试方法.稀土化合物比表面积的测定 Test method of physical characters of rare earth metals and compounds.Determination on specific surface area of rare earth compounds
|
2006-04-13 国家市场监督管理总局 |
| GB/T 26725-2023 规范 |
Ultrafine Tungsten Carbide Powder
|
2023-08-06 国家市场监督管理总局 |
| GB/T 26748-2011 规范 |
Cement grinding aids
|
2011-07-20 国家市场监督管理总局 |
| GB/T 36595-2018 规范 |
Nanoscale barium titanate
|
2018-09-17 国家市场监督管理总局 |
| GB/T 39713-2020 试验/规范 |
Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation
|
2020-12-14 国家市场监督管理总局 |
| GB/T 42310-2023 试验 |
Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
物理吸附 石墨烯 |
2023-03-17 国家市场监督管理总局 |
| GB/T 7702.20-2025 试验标准 |
Test Method for Coal-based Granular Activated Carbon - Part 20: Determination of Pore Volume and Specific Surface Area
煤质颗粒活性炭 |
2025-08-01 国家市场监督管理总局 |
| GB/T 8074-2008 试验 |
Testing method for specific surface of cement.Blaine method
|
2008-01-09 国家市场监督管理总局 |
| GOST 5593-2025 试验标准 |
Aluinum-magnesium alloy powder. Specifications
|
2025-05-06 俄罗斯标准局 |
| GOST ISO/TS 11931-2017 试验标准 |
Nanotechnologies. Nanopowder calcium carbonate. Basic characteristics and methods for determination
纳米技术 纳米碳酸钙 |
2017-09-25 俄罗斯标准局 |
| GOST R 58356-2019 规范 |
Nanomaterials. Single-wall carbon nanotubes. Technical requirements and test methods
单壁碳纳米管 纳米材料 |
2019 俄罗斯标准局 |
| HG/T 2825-2009 规范 |
Granule bentonite
|
2009-12-04 行业标准-化工 |
| HG/T 3061-2009 规范 |
Rubber compounding ingredients.Silica,precipitated,hydrated
沉淀水合二氧化硅 |
2009-12-04 行业标准-化工 |
| HG/T 3073-1999 |
Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of specific surface area - Nitrogen adsorption method
沉淀水合二氧化硅 |
1999-08-12 行业标准-化工 |
| HG/T 3922-2006 规范 |
Activated carbon fiber felt
|
2006-12-31 行业标准-化工 |
| HG/T 4321-2012 试验 |
Technical specifications and test methods for high interfacial zinc oxide
氧化锌 |
2012-11-07 行业标准-化工 |
| HG/T 4532-2013 规范 |
Zinc oxide for cosmetic use
干燥减量 |
2013-10-17 行业标准-化工 |
| IRAM 113258:1986 试验 |
Standard for carbon black for rubber. Method for determination of specific surface area.
炭黑 |
1986-11-07 阿根廷标准化研究所 |
| IRAM 1623:2024 试验 |
Cement. Test method of fineness by air permeability (Blaine method).
|
2024-01-04 阿根廷标准化研究所 |
| ISO 18757:2003 试验 |
细陶瓷(高级陶瓷、高级工业陶瓷).利用BET法通过气体吸收率测定陶瓷粉末的比表面积 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BET方法 精细陶瓷 |
2003-12 国际标准化组织 |
| ISO 20804:2022 试验 |
通过小角度X射线散射(SAXS)测定多孔和颗粒系统的比表面积 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
|
2022-05-27 国际标准化组织 |
| ISO 23604:2022 试验 |
Method of determining specific surface area of coal
|
2022-11-21 国际标准化组织 |
| ISO 4174:1998 试验 |
Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-dimensional air flow through bulk grain
孔隙度 |
1998-02 国际标准化组织 |
| ISO 4652:2012 试验标准 |
橡胶配方配合剂.炭黑.利用氮吸收法的比表面积测定.单点试验规程 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
炭黑 |
2012-06 国际标准化组织 |
| ISO 4652:2020 试验 |
橡胶配料 - 炭黑 - 通过氮吸附法测定比表面积 - 单点程序 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
|
2020-07-23 国际标准化组织 |
| ISO 8008:2005 试验 |
Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
|
2005-10 国际标准化组织 |
| ISO 9277:2010 试验 |
Determination of the specific surface area of solids by gas adsorption - BET method
吸附 物理吸附 |
2010-09 国际标准化组织 |
| ISO 9277:2022 试验/规范 |
Determination of the specific surface area of solids by gas adsorption — BET method
|
2022-11-08 国际标准化组织 |
| JC/T 2518-2019 规范 |
Hydrophobic silica airgel powder
振实密度 |
2019-05-02 行业标准-建材 |
| JIS K 1477:2007 试验标准 |
Test methods for fibrous activated carbon
|
2007-11-20 日本工业标准调查会 |
| JIS K 6216-2:2001 规范 |
Carbon black for rubber industry -- General matters -- Part 2: Standard reference blacks
碘吸附数 |
2001-11-20 日本工业标准调查会 |
| JIS M 8721:2020 试验 |
铁矿石 -比表面积的测定 -使用透气性装置(Blaine)的试验方法 Iron ores -- Determination of specific surface area -- Test method using air-permeability apparatus (Blaine)
铁精矿 |
2020-06-22 日本工业标准调查会 |
| JIS R 1626:1996 试验 |
Measuring methods for the specific surface area of fine ceramic powders by gas adsorption using the BET method
吸附等温线 |
1996-07-01 日本工业标准调查会 |
| JIS Z 8830:1990 试验标准 |
Determination of the specific surface area of powders by gas adsorption methods
吸附 |
1990-07-01 日本工业标准调查会 |
| LST CEN/TS 17510:2020 试验 |
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
|
2020-12-15 立陶宛标准局 |
| LST EN 196-6:2019 试验 |
Methods of testing cement - Part 6: Determination of fineness
细度 |
2019-03-29 立陶宛标准局 |
| LST EN ISO 12800:2019 指南标准 |
核燃料技术 用 BET 法测量氧化铀粉末比表面积的指南 (ISO 12800:2017) Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
|
2019-08-30 立陶宛标准局 |
| NB/SH/T 0959-2017 |
Determination of specific surface area of catalytic cracking catalysts - Static nitrogen adsorption capacity method
|
2017-12-27 行业标准-能源 |
| NF G06-006-18:2010 试验标准 |
纺织品.化学定量分析.第18部分:蚕丝与羊毛或其他动物毛纤维的混合物(硫酸法). Textiles - Quantitative chemical analysis - Part 18 : mixtures of silk and wool or hair (method using sulfuric acid).
BET方法 吸附 |
2010-12-01 法国标准化协会 |
| NF P15-471-6*NF EN 196-6:2018 试验标准 |
Methods of testing cement - Determination of fineness
细度 |
2018-1-1 法国标准化协会 |
| PD CEN/TS 17510:2020 规范 |
从报废轮胎中获得的材料 粉末比表面积的测定 基于氪吸附的方法 Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
吸附剂 |
2020-10-14 英国标准学会 |
| PD ISO/TS 11931:2012 规范标准 |
Nanotechnologies. Nanoscale calcium carbonate in powder form. Characteristics and measurement
纳米碳酸钙 |
2013-01-31 英国标准学会 |
| PD ISO/TS 11937:2012 规范标准 |
Nanotechnologies. Nanoscale titanium dioxide in powder form. Characteristics and measurement
纳米二氧化钛 |
2013-01-31 英国标准学会 |
| SAE AMS3755/1A-1992 规范 |
Powder, Fumed Silicon Dioxide Thickening Efficiency 120
|
1992-01-01 美国机动车工程师协会 |
| SJ/T 10411-2016 试验 |
Physical analysis method of permanent magnet ferrite materials
|
2016-01-15 行业标准-电子 |
| SS-EN 14369:2003 规范 |
Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina
无机支撑和过滤材料 |
2003 瑞典标准研究所 |
| SS-EN 14944-3:2007 试验 |
水泥制品对人类饮用水的影响 试验方法 第3部分:工厂制造的水泥制品中物质的迁移 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products
迁移水 |
2007 瑞典标准研究所 |
| SS-EN 15029:2012 规范标准 |
Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide
|
2012 瑞典标准研究所 |
| SS-EN 725-6:1996 试验 |
Advanced technical ceramics - Methods of test forceramic powders - Part 6: Determination of the specific surface area
吸附 脱气 |
1996 瑞典标准研究所 |
| SS-EN ISO 17200:2020 试验 |
纳米技术 粉末形式的纳米颗粒 特性与测量(ISO 17200:2020) Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
纳米颗粒 |
2020-10-05 瑞典标准研究所 |
| T/CSTM 00525-2022 试验规范 |
Selective hydrodesulfurization catalyst for fluid catalytic cracking gasoline
|
2022-07-20 中国团体标准 |
| T/CSTM 00526-2022 规范 |
Hydroisomerization and hydrodesulfurization catalyst for fluid catalytic cracking gasoline
|
2022-07-20 中国团体标准 |
| T/ZZB 2319-2021 规范标准 |
Nano-scale transparent iron oxide pigments
|
2021-08-26 中国团体标准 |
| UNE-EN 13753:2009 规范 |
Products used for treatment of water intended for human consumption - Granular activated alumina
堆积密度 |
2009-11-04 西班牙标准化协会 |
| UNE-EN 196-6:2019 试验标准 |
Methods of testing cement - Part 6: Determination of fineness
细度 |
2019-10-02 西班牙标准化协会 |
| UNE-EN ISO 17200:2020 试验 |
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020) (Endorsed by Asociación Espa?ola de Normalización in November of 2020.)
纳米颗粒 结晶度 |
2020-11-01 西班牙标准化协会 |
| UOP 944-1996 试验 |
Surface Area of Fresh and Regenerated Catalyst - UOP Method 944-96
|
1996 环球油品公司(美国) |
| UOP 964-2011 试验 |
Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
孔径分布 |
2011-01-01 环球油品公司(美国) |
| YS/T 438.4-2013 试验 |
Methods for physical performance determination of sandy alumina.Part 4:B.E.T method for determination of specific surface area
|
2013-04-25 行业标准-有色金属 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-04 05:44