美利体育登录入口官网

用生物动力学模型预测润滑油生物可降解性的标准试验方法

Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

铸铁（GGG）管件 用于与未增塑聚氯乙烯（PVC-U）压力管道配合

Cast iron (GGG) fittings are used to match unplasticized polyvinyl chloride (PVC-U) pressure pipes

钛和钛合金中厚板材、薄板材和带材 交付技术状态

Titanium and titanium alloy plate, sheet and strip; technical delivery conditions

钛和锻钛合金棒材.技术规范

Titanium and titanium alloy bars - Technical specification

带榫和平行键驱动的套式立铣刀 尺寸和技术交货条件

Shell end mills with tenon and parallel key drive - Dimensions and technical delivery conditions

圆柱形交齿铣刀.交货技术条件

Interlocking cylindrical cutters; technical delivery conditions

加工美利体育官网首页网址管道类别 第 11 部分：材料组 8.1 奥氏体不锈钢管道部件的技术交货条件

Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1

带有不脱出螺钉的螺栓连接件. 第6部分:盖型螺母

Bolted connections with waisted shank - Part 6: Cap nuts

具有螺纹端和恒定锥度长度的锥销

Taper pins with thread ends and constant taper lengths

紧固夹 第4部分：交货技术条件

Fastening clamps - Part 4: Technical delivery conditions

沉头铆钉.标称直径10 mm至36 mm

Countersunk head rivets - Nominal diameters 10 mm to 36 mm

沉头铆钉 标称直径 10 毫米至 36 毫米

Countersunk head rivets - Nominal diameters 10 mm to 36 mm

翼形螺母 翼形边缘

Wing nuts - Edged wings

用于线材制造的绕线盘.第22部分:带锥形法兰的绕线盘.技术规范

Spools for production of wires - Part 22: Spools with conical flanges, technical specifications

滚花螺母 高型

Knurled nuts, high type

砖石工程和地基用螺栓

Masonry and foundation bolts

砌体和地脚螺栓

Masonry and foundation bolts

单面钻孔圆螺母

Round nuts with drilled holes in one face

侧面带销钉的圆螺母

Round nuts with set pin holes in side

包装.一般交货与供货技术条件.第2部分:误差一览表

Packaging - General technical terms of delivery and supply - Part 2: Catalogue of errors

方颈扁圆头螺栓

Cup head square neck bolts

带短角尺的平沉头型方颈螺栓

Flat countersunk head square neck bolts with short square

车床卡盘.第1部分:手动卡盘的交货技术条件

Lathe chucks - Part 1: Technical conditions of delivery for hand operated lathe chucks

航空航天系列 分体螺纹纯剪切螺栓 技术规范

Aerospace series - Pure shear bolts with remote thread - Technical specification

航空航天. 额定压力最高可达210 bar的软管组件. 软管技术规格; 不适用于新设计

Aerospace - Hose assemblies for a nominal pressure of 210 bar - Technical specification for hoses; Inactive for new design

直柄整体硬质合金立铣刀 交货技术条件

Parallel shank solid hardmetal end mills - Technical delivery conditions

沉头铆钉.公差直径1 mm至8 mm

Countersunk head rivets - Nominal diameters 1 mm to 8 mm

蘑菇头铆钉 公称直径 1.6 毫米至 6 毫米

Mushroom head rivets - Nominal diameters 1,6 mm to 6 mm

扁圆头铆钉.公差直径1.4 mm至6 mm

Flat round head rivets - Nominal diameters 1,4 mm to 6 mm

平圆头铆钉 标称直径 1.4mm 至 6mm

Flat round head rivets - Nominal diameters 1,4 mm to 6 mm

平埋头铆钉.公差直径3 mm至5 mm

Flat countersunk head rivets - Nominal diameters 3 mm to 5 mm

盘头半空心铆钉.公差直径1.6 mm至10 mm

Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm

半空心盘头铆钉 标称直径 1.6mm 至 10mm

Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm

调整环

Adjusting rings

带材拉制的单件空心铆钉

Hollow rivets, one piece, drawn from strip

空心铆钉 一件 由带材拉制而成

Hollow rivets, one piece, drawn from strip

T形大头螺栓

T-head bolts with large head

半圆槽铣刀.交货技术条件

Woodruff cutters; technical delivery conditions

船用阀门技术规范第3部分：蝶阀

Technical specifications for valves for shipboard use - Part 3: Butterfly valves

船用阀门技术规范.第3部分:蝶阀

Technical specifications for valves for shipboard use - Part 3: Butterfly valves

船用阀门技术规范第3部分：蝶阀

Technical specifications for valves for shipboard use - Part 3: Butterfly valves

船用阀门技术规范第4部分：截止阀

Technical specifications for valves for shipboard use - Part 4: Stop valves

船用阀门技术规范.第4部分:停止阀

Technical specifications for valves for shipboard use - Part 4: Stop valves

船用阀门技术规范第4部分：截止阀

Technical specifications for valves for shipboard use - Part 4: Stop valves

船用阀门技术条件 第5部分：截止式止回阀

Technical specifications for valves for shipboard use - Part 5: Cut off type non return valves

船用阀门技术规范.第5部分:截止止回阀

Technical specifications for valves for shipboard use - Part 5: Cut off type non return valves

船用阀门技术条件 第5部分：截止式止回阀

Technical specifications for valves for shipboard use - Part 5: Cut off type non return valves

船用阀门技术规范 第6部分：手动停止阀

Technical specifications for valves for shipboard use - Part 6: Hand operated gate valves

船舶建造用阀门技术交付条件 第6部分：手动操作闸阀

Technical specifications for valves for shipboard use – Part 6: Hand operated gate valves

船用阀门技术规范第7部分：隔膜阀

Technical specifications for valves for shipboard use - Part 7: Diaphragm valves

船用阀门技术规范.第7部分:隔膜阀

Technical specifications for valves for shipboard use - Part 7: Diaphragm valves

船用阀门技术规范第7部分：隔膜阀

Technical specifications for valves for shipboard use - Part 7: Diaphragm valves

船用阀门技术规格.第8部分:球阀

Technical specifications for valves for shipboard use - Part 8: Ball valves

船用阀门技术规范第8部分：球阀

Technical specifications for valves for shipboard use - Part 8: Ball valves

侧刃铣刀.交货技术条件

Side milling cutters; technical delivery conditions

热轧结构钢产品 第6部分：高屈服强度结构钢冷加工后技术交货条件

Hot rolled structural steel products Part 6: Technical delivery conditions for high yield strength structural steels after cold working

不锈钢 第2部分：一般用途耐腐蚀钢薄板/板材和带材的交货技术条件（草案）

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

不锈钢 第2部分：一般用途耐腐蚀钢薄板/板材和带材的交货技术条件

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

不锈钢 第3部分：一般用途耐腐蚀钢半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件（草案）

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

不锈钢 第3部分：一般用途耐腐蚀钢半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

不锈钢 第4部分：建筑用耐腐蚀钢薄板/板材和带材的交货技术条件（草案）

Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

不锈钢 第4部分：建筑用耐腐蚀钢薄板/板材和带材的技术交货条件

Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes; German version EN 10088-4:2009

不锈钢.第5部分:建筑用棒材,杆材,线材,型材和光亮耐腐蚀钢的技术交付条件.英文版本DIN EN 10088-5-2009-07

Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes; English version of DIN EN 10088-5:2009-07

不锈钢 第5部分：建筑用耐腐蚀钢棒材、棒材、线材、型材和光亮产品的技术交货条件

Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes; German version EN 10088-5:2009

技术交货条件 钢制压力容器用铸件 第1部分：通用部分

Technical delivery conditions Castings for steel pressure vessels Part 1: General

压力用途的焊接钢管 技术交货条件 第1部分：具有规定室温性能的电焊和埋弧焊非合金钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties; German and English version EN 10217-1:2019/prA1:2023

承压用焊接钢管-交货技术条件-第1部分：具有规定室温性能的电焊和埋弧焊非合金钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties; German and English version EN 10217-1:2019/prA1:2023 / Note: D...

水和其他水成液输送用非合金管和配件.交货技术条件

Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions（includes Amendments A1:2005); English version of DIN EN 10224:2002 + A1:2005

用于输送水和其他含水液体的非合金钢管和配件 交货技术条件

Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005

铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件.英文版本DIN EN 1301-1-2008

Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 1301-1:2008-12

热喷涂.带热喷涂涂层的部件.技术提供条件

Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions; German version EN 15311:2007

成立 交付技术条件 第1部分：概述

Founding - Technical conditions of delivery - Part 1: General; German version EN 1559-1:2011

铸造.交货技术条件.第5部分:镁合金铸件的附加要求

Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings; German version EN 1559-5:1997

铸造.交货技术条件.第5部分:镁合金铸件的附加要求;德文版本EN 1559-5-2017

Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings; German version EN 1559-5:2017

铸造.交货技术条件.第6部分:锌合金铸件的附加要求

Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings; German version EN 1559-6:1998

铝和铝合金.散热片坯料.第1部分:检验和交货技术条件

Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 683-1:2007-03

铝和铝合金 Finstock 第1部分：检验和交货技术条件

Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery; German version EN 683-1:2006

铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件

Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 754-1:2008-06

铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 755-1:2008-06

铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件.德文版本EN 755-1-2016

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery; German version EN 755-1:2016

热喷涂.带热喷涂涂层的部件.技术提供条件(ISO 12670-2011);德文版本EN ISO 12670-2015

Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011); German version EN ISO 12670:2015

带圆柱柄的刀具夹.第2部分:A型专用刀夹柄

Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2004);English version of DIN ISO 10889-2:2006-01

一般钢材产品技术供应条件

General technical delivery conditions for steel products

承压美利体育官网首页网址 第4部分：金属材料技术交货条件的建立

Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials

压力用焊接钢管 技术交货条件 第7部分：不锈钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes