美利体育登录入口官网

非无菌丁腈手套牙科用美国国家标准/美国牙科协会规范 No 102

Non-sterile nitrile gloves for dental use American National Standard/American Dental Association Specification No. 102

预应力混凝土水槽标准

Tendon-Prestressed Concrete Water Tanks

船用水密/气密/气密、防风雨和非密封门用门配件的标准规范

Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

小型船舶 窗户、舷窗、舱口、舷窗盖和门 强度和水密性要求

Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements

门窗.水密性.试验方法

Windows and doors - Watertightness - Test method

窗户和门 水密性 测试方法

Windows and doors. Water tightness. Test method

幕墙.防水性.分类和性能要求

Curtain walling. Watertightness. Performance requirements and classification

门窗.不透水性.分类

Windows and doors - Watertightness - Classification

幕墙.水密封性.空气压力和水喷射动态条件下的实验室试验

Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray

幕墙.不透水性.现场试验

Curtain walling - Watertightness - Site test

建筑物通风.住宅通风用部件/产品的性能检验.外部和内部上升空气传送美利体育官网首页网址

Ventilation for buildings - Performance testing of components/products for residential ventilation - Externally and internally mounted air transfer devices

供水.储水系统和组件的要求

Water supply - Requirements for systems and components for the storage of water

供水-储存用水系统的系统及组件要求

Water supply - Requirements for systems and components for the storage of water

室内游泳池. 包括地下游泳池安全和试验方法在内的特殊要求

Domestic swimming pools. Specific requirements including safety and test methods for inground pools

防水用挠性板.屋顶防水用沥青,塑料和橡胶薄板.水密性的测定

Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness

一般用途的一次性橡胶手套 规格

Single-use rubber gloves for general applications. Specification

用于集水沟的混凝土元件和桶 A 级和 B 级 第 2 部分：混凝土元件

Concrete elements and buckets for gullies - Classes A and B - Part 2: Concrete elements

与土壤接触的元件的防水 第 1 部分：设计和执行的要求和原则

Waterproofing of elements in contact with soil - Part 1: Requirements and principles for design and execution

塑料管道系统.热塑管接头.耐冲击性能试验方法

Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999

工业、商用和车库门和大门.耐水渗透特性.试验方法

Industrial, commercial and garage doors and gates - Resistance to water penetration - Test methods; German version EN 12489:2000

50PT以下小型废水处理系统 第4部分：预制袋就地组装的化粪池（草案）

Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits

建筑物构件和单元件湿热性能.脉动空气压力下外墙系统防雨性能测定

Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; German version EN 12865:2001

建筑构件和建筑构件的湿热性能 脉动气压下外墙系统抵抗暴雨的能力的测定

Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; German version EN 12865:2001

屋顶瓦和异形瓦 术语和产品要求；德文版 EN 1304:2005

Roof tiles and shaped tiles – terms and product requirements; German version EN 1304:2005

幕墙.防水性.现场试验

Curtain walling - Watertightness - Site test; German version EN 13051:2001

幕墙-水密性-现场测试

Curtain walling - Watertightness - Site test; German version EN 13051:2001

鞋靴.整鞋试验方法.耐水性

Footwear - Test methods for whole shoe - Water resistance; German version EN 13073:2001

鞋类.整鞋试验方法.防水性

Footwear - Test methods for whole shoe - Water resistance; German version EN 13073:2001

弹性地板覆盖物.用于特别潮湿地区的聚氯乙烯地板覆盖物.规范: 德文版本 EN 13553:2002

Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification; German version EN 13553:2002

防水用柔性薄板 屋顶防水用沥青、塑料和橡胶薄板 低温拉伸后防水性的测定（草案）

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature

防水用柔性薄板.屋顶防水用沥青、塑料和橡胶薄板.低温拉伸后防水性的测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature; German version EN 13897:2004

混凝土结构的防护和维修用产品和系统.试验方法.在混凝土中不移动的情况下注浆裂纹防水性的测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete; German version of EN 14068:2003

防水用聚合物改性沥青厚涂层.水密性测定.德文版本EN 15820-2011

Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness; German version EN 15820:2011

防水用聚合物改性沥青厚涂料 水密性的测定

Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness; German version EN 15820:2011

带橡胶和塑料涂层的织物.水密性测定.低压法

Rubber- or plastics coated fabrics - Determination of resistance to water penetration - Low pressure method; German version EN 1734:1996

防水软板.屋顶防水用沥青、塑料和橡胶薄板.水密性测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; German version EN 1928:2000

防水用柔性板 屋顶防水用沥青、塑料和橡胶板 水密性的测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; German version EN 1928:2000

国家附录 国家确定的参数 欧洲规范 2：混凝土结构设计 第3部分：液体保留和容纳结构

National Annex - Nationally determined parameters - Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures / Note: Applies in conjunction with DIN EN 1992-3 (2011-01).

光纤互联装置和无源部件.基本试验和测量程序.第2-23部分:试验.非加压式光纤器件外壳密封(IEC 61300-2-23-2010);德文版本EN 61300-2-23-2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices (IEC 61300-2-23:2010); German version EN 61300-2-23:2011

小型船舶.窗户、船灯、舱口、舷窗盖和舷门.强度和防水性要求

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002); German version EN ISO 12216:2002

小艇 窗户、舷窗、舱口、舱口灯和门 强度和水密性要求（ISO/DIS 12216:2018）

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO/DIS 12216:2018); German and English version prEN ISO 12216:2018

小型船舶 窗户、舷窗、舱口、死灯和门 强度和水密性要求（ISO 12216:2020 + Amd 1:2022）（包括修正案：2022）

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020 + Amd 1:2022) (includes Amendment :2022)

小型船舶 窗户、舷窗、舱口、死灯和门 强度和水密性要求

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020 + Amd 1:2022); German version EN ISO 12216:2022 + A1:2022

无压地下排水和污水处理用热塑性塑料管道系统 热塑性塑料管件 冲击强度试验方法（草案）

Test method for impact strength of thermoplastic pipe fittings in thermoplastic piping systems for unpressurized underground drainage and sewage treatment (draft)

幕墙. 透气性和透水性的测定方法

Curtain walling. Methods of determination of air and water transmission

屋顶和液压绝缘柔性、沥青基材料和聚合（热塑性或弹性体）材料 低温拉伸后水密性测定方法

Roofing and hydraulic-insulating flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness after stretching at low temperature

鞋类. 鞋面的试验方法. 防水

Footwear. Test methods for uppers. Water resistance

小型船舶 窗户、舷窗、舱口、死灯和门 强度和水密性要求

Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements

环境标志产品技术要求.塑料门窗

Technical requirement for environmental labeling products Plastic doors and windows

轻质整体立面 抗风压性能、防水性能及空气渗透性能试验方法

Curtain walls. Test method for wind resistance, watertightness and air infiltration.

建筑工程木工与轻质整体幕墙 第一部分 轻质整体幕墙 防水现场试验

Work carpentry and curtain walls. Part 1 - Curtain wall. Standard test method for field determination of water penetration.

木工与幕墙 第2部分：窗户 现场测定水渗透的标准试验方法

Work carpentry and curtain wall. Part 2 - Windows. Standard test method for field determination of water penetration.

建筑工程木工 根据类型和分类选择窗户的标准

Doors and windows. Criteria election related with their type and classification.

门和窗.动态压力下不透水性试验.气旋方面

Doorsets and windows - Water-tightness test under dynamic pressure - Cyclonic aspects

窗和门组合件.动态压力的水密性试验

Windows and doorsets -- Watertightness test under dynamic pressure

用于建筑物密封和玻璃安装的密封剂

Sealants for sealing and glazing in buildings

牙科用一次性橡胶手套

Single-use rubber gloves for dentistry

一次性橡胶检查手套

Single-use rubber examination gloves

一次性使用无菌橡胶外科手套规范

Single-use sterile rubber surgical gloves－Specification

一次性体检手套第2部分:聚氯乙烯手套规范

Single-use medical examination gloves － Part 2: Specification for gloves made from poly(vinyl chloride)

一次性体检手套第2部分:聚氯乙烯手套规范

Single-use medical examination gloves－Part 2：Specification for gloves made from poly(vinyl chloride)

单用途通用应用橡胶手套 规范

Specification for single-use general purpose rubber gloves

门窗 不透水性 试验方法

Windows and doors - Water tightness - Test method

窗户和门 防水性 试验方法

Windows and doors - Water tightness - Test method

幕墙 防水性 现场测试

Curtain walling - Watertightness - Site test

聚合物改性沥青厚涂防水涂层 不透水性测定

Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness

国内游泳池 第一部分: 一般要求包括安全和试验方法

Domestic swimming pools - Part 1: General requirements including safety and test methods

防水用柔性片材 屋顶防水用沥青、塑料和橡胶片材 防水性的测定

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness

非压力地下排水和污水用热塑性管系统 热塑性配件 冲击强度试验方法（等同采用ISO 13263:2010）

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010, IDT)

一次性橡胶手套 一般应用规范（ISO 25518:2021 等同采用）

Single-use rubber gloves for general applications — Specification (ISO 25518:2021, IDT)

门窗 水密性 试验方法

Windows and doors - Water tightness - Test method

幕墙 水密性 静压下的实验室测试

Curtain walling - Watertightness - Laboratory test under static pressure.

门窗 水密性 分类

Windows and doors - Watertightness - Classification

小型船舶 窗户、舷窗、舱口、死灯和门 强度和水密性要求（ISO 12216:2020）

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020)

小型船舶 窗户、舷窗、舱口、舷窗盖和门 强度和水密性要求

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements