美利体育登录入口官网

家具用五金件 家具五金件耐腐蚀性能的测试与评估方法

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Self-drilling screws for the building and construction industries - Corrosion resistance requirements

室内和室外建筑用预涂饰/预涂漆金属板．性能要求

Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements

通用双相（奥氏体/铁素体）铁铬镍钼耐腐蚀铸件的标准规范

Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

拉链耐盐雾(雾)能力的标准试验方法

Standard Test Method for Resistance of Zippers to Salt Spray 40;Fog41;

未 firing 的压力容器 钛和钛合金制造的压力容器的额外要求

Unfired pressure vessels - Additional requirements for pressure vessels of titanium and titanium alloys

环境测试 测试 测试Ka：盐雾

Environmental testing. Tests. Test Ka: Salt mist

半导体装置.机械和气候试验方法.盐雾气氛

Semiconductor devices. Mechanical and climatic test methods. Salt atmosphere

鞋靴.附件的试验方法.金属附件.耐腐蚀性

Footwear - Test methods for accessories - Metallic accessories - Corrosion resistance

表壳和附件.金合金覆盖层.纯度、厚度、耐腐蚀性能和结合强度的测定

Watch-cases and accessories. Gold alloy coverings. Determination of fineness, thickness, corrosion resistance and adhesion

外科器械 非切割铰接器械 一般要求和试验方法

Surgical instruments. Non-cutting, articulated instruments. General requirements and test methods

水雷产品化学镀镍层技术要求

The technology requirements about chemical nickel plating of mine-products

未烧压力容器 第11部分：钛及钛合金压力容器的附加要求

Unfired pressure vessels – Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

阀门 要求和测试 第1部分：通过粉末涂料(P)或液体清漆(F)的环氧涂层来防止腐蚀

Valves - Requirements and tests - Part 1: Protection against corrosion by epoxy coating of coating powders (P) or liquid varnishes (F)

饮用水用热水器、热水装置和储水式热水器 第7部分：容量不超过 2000 升的水箱 有关制造、隔热和腐蚀防护的要求

Water heaters, water heating installations and storage water heaters for drinking water - Part 7: Tanks with a capacity of up to 2 000 l, requirements relating to manufacture, thermal insulation and corrosion protection

液化石油气用橡胶和塑料软管.第2部分:软管组件

Rubber and plastics hoses for liquefied petroleum gas - Part 2: Hose assemblies

金属材料在给定条件下水腐蚀评定

Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; Generals

医疗器械.急救箱装剪刀

Medical instruments - First aid box scissors

安装冷藏和冷冻美利体育官网首页网址的表面检验

Testing the surfaces of installed refrigerators and freezers

钢丝和钢丝产品.绳索用钢丝.第4部分:不锈钢钢丝

Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire; German version EN 10264-4:2012

承压美利体育官网首页网址用不锈钢棒材

Stainless steel bars for pressure purposes; English version of DIN EN 10272:2008-01

水和其他水成液输送用焊接不锈钢管.交货技术条件

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; English version of DIN EN 10312:2002 + A1:2005

用于输送水和其他含水液体的焊接不锈钢管 交货技术条件

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005

脚腿防护装置.脚趾罩和防金属穿透的保护衬垫的要求和试验方法.德文版本EN 12568-2010

Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts; German version EN 12568:2010

建筑五金 窗户和门高窗用五金 要求和测试方法 第16部分：升降和推拉窗用五金（草案）

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows

未 firing 的压力容器 第11部分：钛和钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

未 firing 的压力容器 第11部分：钛和钛合金压力容器的附加要求 德文版 EN 13445-11:2024

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys; German version EN 13445-11:2024

屋檐排水沟支架 要求和测试（草案）

Brackets for eaves gutters - Requirements and testing

屋檐排水沟支架 要求和测试

Brackets for eaves gutters - Requirements and testing

球墨铸铁管、管件和附件 球墨铸铁管和管件有机衬里的要求和试验方法 第1部分：管子和管件的聚氨酯衬里

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings

非脉管内导管.一般性能测试方法

Catheters other than intravascular catheters - Test methods for common properties; German version EN 1618:1997

建筑五金器具.耐腐蚀.要求和试验方法

Building hardware - Corrosion resistance - Requirements and test methods; English version of DIN EN 1670:2007-06

家具五金件家具配件耐腐蚀性能试验与评价方法（草案）

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings

家具五金件 家具配件耐腐蚀性能的试验和评价方法

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings; German version EN 17737:2022

家具五金件家具配件耐腐蚀性能试验与评价方法

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings; German version EN 17737:2022

钢结构的设计 第一部分：一般规定 不锈钢用附加规定

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-4: Allgemeine Bemessungsregeln - Erg?nzende Regeln zur Anwendung von nichtrostenden St?hlen

卫生美利体育官网首页网址用水龙头制品 镍铬电镀层的一般要求

Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr

金属与合金的腐蚀.盐溶液中的交替浸没试验(ISO 11130-2010).德文版本EN ISO 11130-2010

Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010); German version EN ISO 11130:2010

金属与合金的腐蚀.盐溶液中的交替浸没试验(ISO 11130-2017);德文版本EN ISO 11130-2018

Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017); German version EN ISO 11130:2018

土工织物和土工织物相关产品 确定耐酸碱性液体的筛选试验方法（ISO 12960:2020）

Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020)

锌涂层 结构中钢铁防腐蚀指南和建议 第1部分：设计和耐腐蚀的一般原则

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017); German version EN ISO 14713-1:2017

牙科镊子.第1部分:一般要求 (ISO 15098-1:1999); 德文版本 EN ISO 15098-1:2001

Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001

鞋类 配件测试方法：金属配件 耐腐蚀性

Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004); German version EN ISO 22775:2004

搪瓷和瓷釉耐化学腐蚀性的测定第3部分：使用六角形容器或四角形玻璃瓶测定碱性液体的耐化学腐蚀性

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017); German version ...

搪瓷和瓷釉 耐化学腐蚀性的测定 第4部分：使用圆柱形容器测定耐碱性液体的化学腐蚀性

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016); German version EN ISO 28706-4:2016

石油和相关产品 难燃液压液的抗腐蚀性测定 第2部分：含水油液（草案）

Determination of Corrosion Resistance of Flame-Retardant Hydraulic Fluids for Petroleum and Related Products Part 2: Aqueous Oils (Draft)

釉瓷和搪瓷精饰 制件的釉瓷和搪瓷区域用试验方法的选择

Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2000); English version of DIN EN ISO 4528:2009-04

小艇 海阀和贯穿船体的配件 第1部分：金属（ISO 9093-1:1994）

Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

光学和光学仪器.环境试验方法.第4部分:盐雾

Optics and optical instruments - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2002)

伸缩警棍

Expandable baton

合成石材试验方法 盐雾老化测试

Agglomerated stone test methods—Determination of resistance to ageing by salt mist

表壳体及其附件 金合金覆盖层 第2部分：纯度、厚度、耐腐蚀性能和附着力的测试

Watch-cases and accessories—Gold alloy coverings—Part 2:Determination of fineness, thickness, corrosion resistance and adhension

枪弹试验方法 第4部分：漆层耐腐蚀性试验

Test methods of cartridge.Part 4:Corrosion test of lacquer

医用凿子 通用技术要求和试验方法

Medical chisels. General technical requirements and test methods

水泥基修复化合物 液体酸性侵蚀性环境中耐腐蚀性加速试验方法

Cement-based products for concrete repair. Method of accelerated testing of corrosion resistance in acid aggressive liquid environment

建筑中的腐蚀防护 混凝土 测试的一般要求

Corrosion protection in construction. Concretes. General requirements for testing

腐蚀和老化联合防护系统.热扩散锌涂层.一般要求与控制方法

Unified system of corrosion and ageing protection. Thermodiffusion zinc coatings. General requirements and control methods

外科手术器械 非切割类和关节类器械 一般要求和试验方法

Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods

碳钢和低合金钢带 采用连续热浸镀锌工艺 镀铝锌合金 用于一般用途

Continuous hot dip aluminium-zinc coated carbon and low alloy steel sheets for general uses.

精密瓷器(高级瓷器、高级工业瓷器).在酸碱溶液中单块陶瓷耐腐蚀性的测定

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions

混凝土增强用不锈钢棒材

Stainless steel bars for concrete reinforcement

铝及铝合金的阳极氧化和有机涂层的复合覆层

Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys

牙科.镊子.一般要求

Dentistry -- tweezers -- General requirements

镁和镁合金转化膜和阳极氧化膜

Conversion and anodic oxide coatings on magnesium and magnesium alloys

建筑五金件 门窗五金件 要求与试验方法 第17部分：平开推拉窗五金件

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 17: Hardware for Tilt and Slide windows

非加热压力容器 第11部分：对钛和钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

用于燃用燃气的家用燃气具连接的波纹金属软管组件标准

Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels

家具硬件 家具配件耐腐蚀性测试与评估方法

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings

玻璃和瓷器搪瓷 用于输送原水和饮用水的内外搪瓷阀门和压力容器管道连接件 质量要求和试验（ISO 11177:2019）

Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)

太阳能 集热器部件与材料 第3部分：吸收体表面耐久性 (ISO 22975-3:2014)

Solar energy - Collector components and materials - Part 3: Absorber surface durability (ISO 22975-3:2014)

牙科 激光焊接与添加材料（ISO 28319:2018）

Dentistry - Laser welding and filler materials (ISO 28319:2018)

未烧压力容器 第11部分:钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11 : additional requirements for pressure vessels of titanium and titanium alloys

未烧压力容器 第11部分:钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11 : additional requirements for pressure vessels of titanium and titanium alloys

手持式手术和牙科器械 耐高压灭菌、耐腐蚀和耐热性的测定

Surgical and dental hand instruments - Determination of resistance to autoclaving, corrosion and exposure to heat

食物和动物饲料的微生物学检验.使用菌落计数法测定30℃或37℃时的推断肠细菌含量

Microbiology of food and animal feeding stuffs - Enumeration of presumptive enterobacteria by colony count technique at 30 oC or 37 oC.

电镀 锌

Plating@ Zinc

电镀 锌

Plating, Zinc

电镀、电刷、镍低应力、低硬度沉积

Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit

电镀，刷子，硬沉积铬，三价

Plating, Brush, Chromium Hard Deposit, Trivalent

电镀，刷子，无氰银通用

Plating, Brush, Non-Cyanide Silver General Purpose

使用聚四氟乙烯 (PTFE) 沉积的电镀和无电镀镍

Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)

电镀 化学镀镍 与聚四氟乙烯（PTFE）共沉积

Plating@ Electroless Nickel@ Codeposited with Polytetrafluoroethylene (PTFE)

镀铬

Plating, Chromium

电镀，锌镍合金（12 至 16% Ni）

Plating, Zinc-Nickel Alloy (12 to 16% Ni)

电镀 锌镍合金（镍含量 12% 至 16%）

Plating, Zinc-Nickel Alloy (12 to 16% Ni)

高压镁合金碱性硬质阳极涂层

Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage

铝合金通用涂层的化学膜处理

Chemical Film Treatment for Aluminum Alloys General Purpose Coating

硅树脂250℃(482℉)加工处理涂料

Coating Material, Silicone Resin 250°C (482°F) Cure

铝合金、板材和板材 2.5Mg 0.25Cr (5052-O) 退火

Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed

铝合金 拉制 圆形无缝管 2.5Mg 0.25Cr（5052-0）退火（UNS A95052）

Aluminum Alloy@ Drawn@ Round Seamless Tubing 2.5Mg - 0.25Cr (5052-0) Annealed (UNS A95052)

夹层结构用5052、350 (177)处理的柔性蜂窝铝合金芯

Core@ Flexible Honeycomb@ Aluminum Alloy For Sandwich Construction 5056@ 350 (177)

核心，柔性蜂窝，铝合金，三明治结构处理 5052，350 华氏度（177 摄氏度）

Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 Fahrenheit (177 Celsius)

镁合金，板材 4.0Y 2.25Nd 0.5Zr（WE43C T5）沉淀热处理（UNS M18434）

Magnesium Alloy, Plate 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated (UNS M18434)

镁合金 挤压件 4.0Y 2.25Nd 0.5Zr（WE43C T5）沉淀热处理（UNS M18434）

Magnesium Alloy@ Extrusions 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated (UNS M18434)

镍、薄板和带材低碳（0.02 最大）退火

Nickel, Sheet and Strip Low (0.02 Max) Carbon Annealed

钢，耐腐蚀，管材 19Cr 10Ni 高压液压，焊接加超声波测试或无缝冷拔，八分之一 硬回火

Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper

钢 耐腐蚀 无缝和焊接飞机管 19Cr 9.5Ni（SAE 30304）冷拔 1/2 硬回火（UNS S30400）

Steel@ Corrosion-Resistant@ Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn@ 1/2 Hard Temper (UNS S30400)

焊接 304/304L 不锈钢管

Welded, 304/304L Stainless Steel Tubing

无缝 304/304L 不锈钢管

Seamless, 304/304L Stainless Steel Tubing

玻璃和搪瓷 化学腐蚀抵抗力的测定 第5部分：封闭系统中的化学腐蚀抵抗力的测定（ISO 28706-5:2010）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)

与食品接触的材料和物品 餐具和餐桌凹形器皿 第4部分：镀金餐具的要求（ISO 8442-4:1997）

Materials and articles in contact with foodstuffs- Cutlery and table holloware - Part 4: Requirements for gold-plated cutlery (ISO 8442-4:1997)

汽车用压缩气弹簧

Compression gas spring for automobiles

家具五金 家具配件耐腐蚀性能试验与评价方法

Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings

未烧压力容器 第11部分：钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

在废气携带组件中金属材料的耐冷凝腐蚀.试验方法

Resistance of metallic materials to condensate corrosion in exhaust gas-carrying components - Testing methods