美利体育登录入口官网

附录A到PTC 6 蒸气轮机用试验规范

Appendix A to PTC 6, the Test Code for Steam Turbines

制备和使用作为参考温度的冰点浴的标准实施规程

Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

热环境 使用所需出汗率的计算对热应力进行分析测定和解释ISO 7933:1989修改

Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified

纸张.打印纸和办公用纸.纸带的要求

Paper - Printing and business paper - Requirements for continuous stationery

滚动轴承.热安全运行速度.计算和校正值

Rolling bearings - Thermally safe operating speed - Calculation and correction values

高温环境——基于所需排汗率的热应力分析与解释

Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989 modified)

烟囱.热和流体动态计算方法.第1部分:适合一种器具的烟囱

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance(includes Amendment A2:2008); English version of DIN -EN 13384-1:2008-08

自行车. 电动自行车. EPAC自行车; 德文版本EN 15194-2017

Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017

灯头温升测量的标准方法

Standard method of measurement of lamp cap temperature rise (IEC 60360:1998); German version EN 60360:1998

建筑物的热性能没有系统技术的建筑物的夏季室温一般标准和验证程序（ISO 13791:2004）

Thermal behavior of buildings – Summer room temperatures in buildings without system technology – General criteria and validation procedures (ISO 13791:2004)

建筑物能源性能 - 部分EPB要求指标（与热能平衡和建筑特征相关）

Energy performance of buildings – Indicators for partial EPB requirements related to thermal energy balance and fabric features

热环境工效学 使用预测的热应变模型分析确定和解释热应力（草案）

Thermal Environmental Ergonomics Determining and Interpreting Thermal Stress Analytically Using Predicted Thermal Strain Models (Draft)

热环境的人类工效学.通过计算预热应力对热应力的分析测定和说明

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004

热环境的人体工程学 使用预测热应变的计算来分析确定和解释热应力

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...

热环境工效学 使用预测的热应变模型分析确定和解释热应力（ISO/DIS 7933:2018）

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018

热环境的人体工程学 使用预测热应变的计算来分析确定和解释热应力

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...

德国焊接协会关于小于3毫米厚度钢材点焊的标准

German Welding Association's standard for spot welding of steel with a thickness of less than 3 mm

工业燃料炉热平衡测定与计算基本规则

Basic rules for the measurement and calculation of thermal equilibrium of fuel-fired furnace in industry

玻璃纤维单元窑热平衡测定与计算方法

Determination and calculation of heat balance for fibreglass unit melter

水泥回转窑热平衡、热效率、综合能耗计算方法

Methods for the calculation of heat balance，heat efficiency and comprehensive energy consumption of cement rotary kiln

砖瓦工业隧道窑热平衡、热效率测定与计算方法

Measuring and calculating methods of heat balance and heat efficiency of tunnel kiln of brick industrial

日用陶瓷电加热窑炉热平衡、热效率测定与计算方法

Methods for Determining and Calculating Thermal Balance and Thermal Efficiency of Electric Heating Kilns for Daily Use Ceramics

陶瓷喷雾干燥塔热平衡、热效率测定与计算方法

Method for Determining and Calculating Thermal Balance and Thermal Efficiency of Ceramic Spray Drying Tower

石灰机械化立窑热平衡测定与计算方法

The determination and calculation procedure of the heat balance of mechanized lime vertical kiln

"机械, 仪器以及其他工业产品的气候环境耐久性试验方法. 温度稳定性影响试验"

Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature

测量灯头温度上升的标准方法

Standard method of measurement of lamp cap temperature rise

电阻焊美利体育官网首页网址 第1部分设计、制造和安装安全要求

Resistance welding eguipment. Part 1. Safety reguirements for design, manufacture and installation

热环境的人体工程学 使用预测热应变的计算来分析确定和解释热应力

Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

IEEE 2 区和 I 类 2 区危险（分类）场所电机应用指南 勘误表 1

IEEE Guide for the Application of Electric Machines in Zone 2 and Class I, Division 2 Hazardous (Classified) Locations - Corrigendum 1

IEEE 电机在 2 区和 I 类 2 区危险（分类）场所的应用指南 勘误表 1

IEEE Guide for the Application of Electric Machines in Zone 2 and Class I, Division 2 Hazardous (Classified) Locations - Corrigendum 1

计算架空裸导线电流-温度的 IEEE 标准

IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors

热环境人类工效学 词汇和符号

Ergonomics of the thermal environment - Vocabulary and symbols

建筑物能量特性.空间加热和冷却用能量的计算

Energy performance of buildings - Calculation of energy use for space heating and cooling

建筑物能源性能. 热能平衡和组构特征相关部分EPB要求指标. 第1部分: 选项综述

Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options

热环境的人类工效学.通过计算预测的热应变对热应力的分析测定和说明

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

齿轮 热性能 第1部分：在95℃储存温度下热平衡的额定齿轮传动

Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature

齿轮 热性能 第2部分：热承载能力

Gears - Thermal capacity - Part 2: Thermal load-carrying capacity

拖拉机冷却系热平衡 试验方法

Thermal equilibrium of cooling system for tractors.Test procedures

通用齿轮装置 型式试验方法

General gear units — Type test mothod

砖瓦工业隧道窑热平衡、热效率 测定与计算方法

The methods for the measurement and calculation of heat balance, heat efnciencyof tunnel kiln

陶瓷工业隧道窑热平衡热效率测定与计算方法

Measurement and calculation method of heat balance and thermal efficiency of ceramic industral tunnel kiln

轮窑热平衡、热效率测定与计算方法

Measurement and calculation method of heat balance and thermal efficiency of wheel kiln

隧道式砖瓦干燥室热平衡、热效率测定与计算方法

Measurement and calculation method of heat balance and thermal efficiency of tunnel type brick and tile drying chamber

空气冷却器与空气加热器.性能试验方法

Test methods for determining the performance of air cooling and air heating coils

陆地锅炉.热平衡

Land boilers -- Heat balancing

连续式钢材加热炉的热平衡方法

Method of heat balance for continuous reheating furnace for steel

电弧炉热平衡方法

Method of heat balance for electric arc furnace

陶瓷器及耐火砖焙烧隧道窑的热平衡计算方法

Heat balancing of pottery and refractory firing tunnel kiln

陶瓷器及耐火砖焙烧间歇窑的热平衡计算方法

Heat balancing of pottery and refractory firing periodic kiln

水泥砖回转窑的热平衡计算方法

Heat balancing of cement rotary kiln

矿石及其他材料用连续式烘干炉的热平衡计算方法

Heat balancing of continuous dryer for ores and other materials

石灰焙烧窑、炉的热平衡计算方法

Heat balancing of kiln and furnace for lime

热平衡的通用规则

General rules for heat balance

航空航天系列 金属材料 热处理设施 通用要求

Aerospace series - Metallic materials - Heat treatment facilities - General requirements

往复式内燃燃气发电机组热平衡试验方法

Thermal balance test method for reciprocating internal combustion gas generator sets

建筑物的能源性能 与热能平衡和构造特性相关的部分EPB要求的指标 第1部分：选项概览（ISO 52018-1:2017）

Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017)

热环境人体工程学 通过计算预测热应变来分析测定和解释热应力（ISO 7933:2004）

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)

铁路动力装置用柴油机认证试验实施细则

Manual for the carrying out of approval tests of railway motive power units

内燃机车冷却装置性能及热平衡试验方法

Diesel locomotive cooling device performance and thermal balance test method

用于语音服务、移动性管理和 RFSS 能力轮询服务的项目 25 ISSI 消息和程序 附录 3 与 IWF 互通（TIA-102.BACA-B 的附录）

Project 25 ISSI Messages and Procedures for Voice Services, Mobility Management, and RFSS Capability Polling Services- Addendum 3- Interworking with an IWF (Addendum to TIA-102.BACA-B)

个人防护装备 人体工程学原理

Personal protective equipment - Ergonomic principles

热环境人体工程学 使用预测热应变的计算来分析确定和解释热应力（ISO 7933:2004）

Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)

电力电子电容器

Kondensatoren der Leistungselektronik

重有色冶金炉窑热平衡测定与计算方法（铜熔炼反射炉）

Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (copper smelting reverberatory furnace)

重有色冶金炉窑热平衡测定与计算方法（吹炼转炉）

Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Converter)

重有色冶金炉窑热平衡测定与计算方法（铜闪速炉）

Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Copper flash smelting furnace)

重有色冶金炉窑热平衡测定与计算方法（镍闪速炉）

Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Nickel flash smelting furnace)

重有色冶金炉窑热平衡测定与计算方法（铜精炼反射炉）

Determination and Calculation Method of Heat Balance of Heavy Nonferrous Metallurgy Furnace (Copper Refining Reverberatory Furnace)

氧化铝生产专用美利体育官网首页网址热平衡测定与计算方法 第1部分:熟料回转窑系统

Determination and calculation of heat balance of special equipments for alumina production.Part 1: Clinder rotary kiln system

氧化铝生产专用美利体育官网首页网址 热平衡测定与计算方法 第12部分：间接加热脱硅系统

Determination and calculation of heat balance of special equipments for alumina production.Part 12:Indirect heating desiliconizing system

氧化铝生产专用美利体育官网首页网址热平衡测定与计算方法.第3部分:竖式石灰炉

Determination and calculation of heat balance of special equipments for alumina production.Part 3: Upright lime furnace

氧化铝生产专用美利体育官网首页网址热平衡测定与计算方法 第5部分:蒸发器

Determination and calculation of heat balance of special equipments for alumina production.Part 5: Evaporator

氧化铝生产专用美利体育官网首页网址热平衡测定与计算方法.第6部分:脱硅系统

Determination and calculation of heat balance of special equipments for alumina production.Part 6: Desiliconizing system

氧化铝生产专用美利体育官网首页网址.热平衡测定与计算方法.第8部分:气态悬浮焙烧系统

Determination and calculation method of heat balance of special equipments for alumina production - Part 8: Gaseity suspension calcine system

炭素制品生产炉窑热平衡测定与计算方法.第1部分:回转窑

Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 1:Gyration cave

炭素制品生产炉窑热平衡测定与计算方法.第2部分:罐式煅烧炉

Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 2:Pot-type calciner

炭素制品生产炉窑热平衡测定与计算方法.第3部分:电气煅烧炉

Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 3:Electric calciner

炭素制品生产炉窑热平衡测定与计算方法.第4部分:焙烧炉

Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 4:Calcinator

炭素制品生产炉窑热平衡测定与计算方法.第5部分:石墨化电阻炉

Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 5:Greying resistance furnace

重有色冶金炉窑热平衡的测定与计算方法（富氧侧吹熔池熔炼炉）

Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnaces (oxygen-rich side-blown bath melting furnace)

电解铝生产专用美利体育官网首页网址 热平衡测定与计算方法 铝液保持炉

Methods for determinanation and calculation of heat balance of special equipments for aluminium production.Aluminium holding furnace

铝用炭素生产专用美利体育官网首页网址 热平衡测定与计算方法 热媒炉

Determination and calculation of heat balance of special equipments for carbon production.Heating medium furnace