美利体育登录入口官网

美利体育登录入口官网:穿透

穿透在化工领域指化学品通过手套材料的针孔、接缝或多孔部分进入的流动现象。在工程中,穿透指分隔构件上的开口供设施通过,或吸附过程中流出物出现特定浓度的目标吸附物。


穿透有关的标准

标准号 & 类别标准名称发布
API TR 17TR3-2004
试验

防喷器组下方海底井口钻孔的风险和收益评估(第一版)

An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack (First Edition)

2004-11-01
美国石油学会
AS/NZS 2161.10.1:2005
规范

职业防护手套第 10.1 部分:防化学品和微生物的防护手套 术语和性能要求

Occupational protective gloves Part 10.1: Protective gloves against chemicals and micro-organisms- Terminology and performance requirements


渗透 防护手套 

2005-04-27
澳大利亚/新西兰标准
AS/NZS 2161.10.1:2005(R2016)
术语

职业防护手套第 10.1 部分:防化学品和微生物的防护手套 术语和性能要求

Occupational protective gloves Part 10.1: Protective gloves against chemicals and micro-organisms- Terminology and performance requirements


渗透 防护手套 

2016
澳大利亚/新西兰标准
ASTM D1403-26
试验

使用四分之一和半比例锥入度美利体育官网首页网址润滑脂锥入度的标准试验方法

Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment


稠度 

2026-04-01
美国材料与试验协会
ASTM D5160-95(2008)
Guide

活性碳气相吸收检验的标准指南

Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon


活性炭 

1995
美国材料与试验协会
ASTM D5160-95(2014)
Guide

活性炭气相吸附试验的标准指南

Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon


活性炭 

1995
美国材料与试验协会
ASTM D6646-03(2008)
Test Method

颗:椭椿钚蕴苛蚧獯┩溉萘康谋曜际匝榉椒

Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon


活性炭 

2003
美国材料与试验协会
ASTM E3347/E3347M-26
规范

执法人员使用的防弹盾牌的标准规范

Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers

2026-06-01
美国材料与试验协会
ASTM F1296-03
Guide

化工防护服评价用标准指南

Standard Guide for Evaluating Chemical Protective Clothing


化学防护服 渗透 

2003
美国材料与试验协会
ASTM F1296-08(2015)
Guide

评估化学品防护服的标准指南

Standard Guide for Evaluating Chemical Protective Clothing


化学防护服 渗透 

2008
美国材料与试验协会
ASTM F1383-11
Test Method

断续接触条件下防护服材料抗液体或气体渗透的试验方法

Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact


渗透 

2011
美国材料与试验协会
ASTM F2766-11(2015)
Test Method

船闸的标准试验方法

Standard Test Method for Boat Barriers

2011
美国材料与试验协会
ASTM G17-07(2024)
试验

管道涂层(钝杆)抗渗透性的标准试验方法

Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)


管道涂层 

2024-06-01
美国材料与试验协会
BS ISO 10295-1:2007
试验

建筑单元和构件的燃烧试验.服务设施的燃烧测试.渗透密封

Fire tests for building elements and components. Fire testing of service installations. Penetration seals


防火分隔构件 

2007-07-31
英国标准学会
BS ISO 12500-2:2007
试验

压缩空气过滤器.试验方法.油蒸气

Filters for compressed air - Test methods - Oil vapours


吸附容量 

2007-07-31
英国标准学会
DIN 18195-9 E:2002-09
规范

建筑物的防水性 第9部分:渗透、转换、连接和端接

Water-proofing of buildings - Part 9: Penetrations, transitions, connections and endings


防水层 

2002-09
德国标准化学会
DIN 18234-3 E:2002-03
试验

建筑物大型屋顶的消防安全 从下面的火灾暴露 第3部分:屋顶穿透和屋顶边缘 要求和测试

Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Roof penetrations and roof edges - Requirements and testing


连接 

2002-03
德国标准化学会
DIN 18234-3 E:2016-12
试验

建筑物大型屋顶的消防安全 从下面的火灾暴露 第3部分:屋顶穿透和屋顶边缘 要求和测试

Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Roof penetrations and roof edges - Requirements and testing


防火 

2016-12
德国标准化学会
DIN 18234-4 E:2002-03
规范

建筑物大型屋顶的消防安全 从下面发生的火灾 第4部分:满足 DIN 18234-3 要求且无需进一步提供证据的屋顶贯穿件和屋顶边缘列表

Fire safety of large roofs for buildings - Fire exposure from below - Part 4: List of roof penetrations and roof edges, which fulfil the requirements of DIN 18234-3 without further provision of evidence


连接 

2002-03
德国标准化学会
DIN 71460-2 E:1994-11
试验

道路车辆 乘客舱空气过滤器 第2部分:气体过滤测试

Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration


吸附 空气过滤器 

1994-11
德国标准化学会
DIN 71460-2 E:2018-07
试验标准

道路车辆 乘客舱空气过滤器 第2部分:气体过滤测试

Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration

2018-07
德国标准化学会
DIN EN 14786:2007-03
试验

防护服-喷雾液体化学品、乳液和分散体抗渗透性的测定-雾化器测试

Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; German version EN 14786:2006


渗透 

2007-03
德国标准化学会
DIN EN 16448-2 E:2012-07
试验

保护服装 人体防护 第2部分:防弹背心 要求和试验方法

Protective clothing - Body protection - Part 2: Requirements and test methods for bulletproof vests


背景材料 

2012-07
德国标准化学会
DIN EN 16523-1:2018
试验标准

材料耐化学品渗透性的测定 第1部分:在连续接触条件下潜在危险液体化学品的渗透;德文版 EN 16523-1:2015+A1:2018

Determination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact; German version EN 16523-1:2015+A1:2018


渗透 降解 

2018-12-00
德国标准化学会
DIN EN 60695-11-20:2004
试验

着火危险试验.第11-20部分:试验火焰:500W火焰的试验方法

Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods (IEC 60695-11-20:1999 + A1:2003); German version EN 60695-11-20:1999 + A1:2003


燃烧行为 

2004-05
德国标准化学会
DIN EN ISO 10121-2 E:2011-01
试验

全面通风用气相空气清洁剂和装置性能评估的试验方法 第2部分:气相空气清洁装置(GPACD)(草案)

Test methods for performance evaluation of vapor phase air cleaning agents and devices for general ventilation Part 2: Gaseous phase air cleaning devices (GPACD) (draft)

2011-01
德国标准化学会
DIN EN ISO 374-1:2018-10
试验标准

危险化学品和微生物防护手套 第1部分:化学风险的术语和性能要求

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016 + Amd. 1:2018); German version EN ISO 374-1:2016 + A1:2018 / Note: To be replaced by DIN EN ISO 374-...


渗透 防护手套 

2018-10
德国标准化学会
DIN EN ISO 6529:2003-01
试验

热塑性塑料半成品焊接接头的测试 - 第 7 部分:腰部试样拉伸测试

Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 / Note: To be replaced by DIN EN 12814-7 (2022-11).


渗透 穿透时间 

2003-01
德国标准化学会
DVGW W 239:1991-07
规范

规划与操作用于水处理的活性炭过滤器

Planning and operating activated carbon filters for water treatment

1991-07
德国煤气与水工业协会
GA 667-2020
规范标准

防爆炸透明材料

Anti-explosion transparent material

2020-01-19
行业标准-公共安全标准
GB/T 44951-2024

防弹材料及产品V50试验方法

V50 test method for bulletproof materials and products


入射角 背衬材料 

2024-11-28
国家市场监督管理总局
GOST 12.4.259-2014
规范

职业安全标准体系. 液态化学品防护服. 提供防护液态化学品的有效防护性能的化学品防护服的性能要求. (6类和PB [6]类)

Occupational safety standards system. Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals. (Types 6 and PB [6])

2014
俄罗斯标准局
IEEE N42.46-2008
试验

货物和车辆安全审查用X射线及γ射线系统的测定用美国国家标准

American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening


成像性能 空间分辨率 

2008-08-19
美国电气电子工程师学会
IRAM 3609-4:2021
试验

防化学产品和微生物手套 第4部分:抗化学降解性能

Protective gloves against dangerous chemicals and microorganisms. Part 4 - Resistance to degradation against chemicals.


手套 降解 

2021-12-02
阿根廷标准化研究所
ISO 10295-1:2007
试验

建筑单元和构件的燃烧试验.服务设施的燃烧测试.第1部分:渗透密封

Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals


防火分隔构件 

2007-07
国际标准化组织
ISO 12500-2:2007
试验

压缩空气过滤器.试验方法.第2部分:油蒸汽

Filters for compressed air - Test methods - Part 2: Oil vapours


吸附容量 

2007-06
国际标准化组织
JIS T 8116:2005
规范标准

化学防护手套

Protective gloves for use against chemicals


渗透 

2005-09-25
日本工业标准调查会
KS K ISO 22609:2018
试验标准

传染试剂防护服.医疗面罩.防人造血渗透的试验方法(固定容积、水平喷射)

Clothing for protection against infectious agents-Medical face masks-Test method for resistance against penetration by synthetic blood(fixed volume, horizontally projected)


医用口罩 合成血液 

2018-1-1
韩国科技标准局
LST EN ISO 11393-3:2019
试验

防护用链锯手持式工具使用者服装 第3部分:鞋履测试方法(ISO 11393-3:2018)

Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear (ISO 11393-3:2018)


鞋类 

2019-01-31
立陶宛标准局
QC/T 254-2019
规范

运钞车

cash transport truck

2019-08-27
行业标准-汽车
SS-EN 1366-3:2005
试验

用于服务设施的耐火测试 第3部分:贯穿密封

Fire resistance tests for service installations - Part 3: Penetration seals

2005
瑞典标准研究所
T/ZZB 0277-2017
规范

轻型高透防弹防砸符合玻璃

Light-weight high-transmittance ballistic and forced entry resistant glass

2017-12-15
中国团体标准
UNE-EN 13124-2:2004
试验

窗、门和百叶窗 防爆性 试验方法 第2部分:范围试验

Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test


攻击面 

2004-11-12
西班牙标准化协会
UNE-EN ISO 10121-2:2014
试验标准

评估一般通风用气相空气净化介质和装置性能的试验方法 第2部分:气相空气净化装置(GPACD)(ISO 10121-2:2013)

Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices (GPACD) (ISO 10121-2:2013)


吸附 

2014-07-02
西班牙标准化协会
YY/T 0700-2008
试验标准

血液和体液防护装备.防护服材料抗血液和体液穿透性能测试.合成血试验方法

Clothing for protection against contact with blood and body fluids.Determination of the resistance of protective clothing materials to penetration by blood and body fluids.Test method using synthetic blood

2008-10-17
行业标准-医药

 




Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-09-11 06:47

美利体育(meili)官方网站_美利体育手机版下载