美利体育登录入口官网

挥发性防腐剂（VCI）测试 常规测试方法中的陷阱与惊喜

Traps and surprises in conventional testing methods for volatile corrosion inhibitor (VCI) testing

电连接器 用于设计用于在 93 或以下正常运行的铝对铝和铝对铜导体之间的连接器 以及设计用于在 100 或以下正常运行的铜对铜导体之间的连接器 （另见 ANSI C119.0）

Electric Connectors ?? Connectors for Use between Aluminum-to-Aluminum and Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93??and Copper-to-Copper Conductors Designed for Normal Operation at or Below 100??(Also see ANSI C119.0)

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods for destructive testing of welds in metal - Corrosion test for welded austenitic stainless steel

金属及相关涂层的试验方法 方法选择指南

Methods of test for metallic and related coatings - Method selection guide

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods of test for metallic and related coatings - Corrosion and related property tests - Sulfur dioxide/hydrogen sulfide porosity tests

电镀层 工程用铬

Electroplated coatings - Chromium for engineering applications

测定双联奥氏体/铁素体不锈钢不稳定金属间相的标准试验方法

Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

用Corrodkote程序对装饰性电沉积涂层进行腐蚀试验的标准试验方法

Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

用与对照相比测定矿物纤维或纤维素纤维绝缘材料腐蚀性的标准试验方法

Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control

浸槽式金属除垢剂的全浸腐蚀试验的标准指南

Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

玻璃器皿中发动机冷却剂腐蚀试验的标准试验方法

Standard Test Method for Corrosion Test for Engine Coolants in Glassware

受腐蚀环境影响的涂漆或涂层试样评估的标准试验方法

Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

卤代有机溶剂及其混合物对金属腐蚀的标准试验方法

Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

水在无传热情况下的腐蚀性的标准试验方法 (重量损失法)

Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

涂漆金属的周期性盐雾/紫外线暴露的标准实施规程（雾/干燥柜和紫外线/冷凝柜中的交替暴露）

Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

评估在121℃温度条件下柴油发动机油侵蚀作用的标准试验方法

Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?deg;C

钢卷涂层建筑产品的腐蚀测试面板制备 测试和评级标准指南

Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

线圈涂层建筑产品的腐蚀试验板准备 试验和等级标准指南

Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

玻璃器皿中非水基发动机冷却液腐蚀试验的标准测试方法

Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware

玻璃器具中无水发动机冷却液腐蚀性试验的标准试验方法

Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware

玻璃器皿中传热流体腐蚀试验的标准试验方法

Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware

太阳能加热和制冷系统中贮存液体用金属容器材料的实验室遮蔽

Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems

外科仪器腐蚀的标准试验方法

Standard Test Method for Corrosion of Surgical Instruments

手术器械腐蚀的标准试验方法

Standard Test Method for Corrosion of Surgical Instruments

用飞机维修化学品腐蚀低脆化镉板的标准试验方法

Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

救护车标准规范

Standard Specification for Rescue Carabiners

垫片材料腐蚀性试验方法

Standard Test Method for Corrosion Testing of Gaskets

飞机金属腐蚀总体浸入维护化学品的标准实践

Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

飞机维修化学品全浸蚀试验标准实践

Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

高温或高压环境中腐蚀试验的标准指南

Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

高温和/或高压环境中腐蚀试验的标准指南

Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

高温, 高压或高温高压环境下进行腐蚀试验的标准指南

Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

铝合金剥离腐蚀试验的标准指南

Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

锆,铪及其合金产品在680℉(360℃)的水中或750℉(400℃)的水蒸气中进行腐蚀性测试的标准试验方法

Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680x00B0;F [360x00B0;C] or in Steam at 750x00B0;F [400<

金属的实验室浸没腐蚀试验的标准指南

Standard Guide for Laboratory Immersion Corrosion Testing of Metals

测量腐蚀试验用土壤pH值的标准试验方法

Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

B0456-铜加镍加铬和镍加铬电镀层的标准规范

B0456-Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

F2129-进行循环动电位极化测量以确定小型植入装置的腐蚀敏感性的测试方法

F2129-Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

G0005-进行动电位阳极极化测量的参考测试方法

G0005-Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

新方法在铝合金融腐蚀测试中的应用

Application of new method in corrosion testing of aluminum alloy

腐蚀测试在自然水中的应用: 第二卷

Corrosion Testing in Natural Water: Volume 2

大气腐蚀非铁金属研讨会

Symposium on Atmospheric Corrosion of Non-Ferrous Metals

大气因素对工程金属腐蚀的影响

Effects of atmospheric factors on corrosion of engineering metals

计算机化定量红外分析

Computerized quantitative infrared analysis

使用合成环境进行腐蚀测试

The Use of Synthetic Environments for Corrosion Testing

家用集中供暖和冷却水系统用化学抑制剂性能评估 试验方法

Assessment for the performance of chemical inhibitors for use in domestic central heating and cooling water systems. Test method

卷材涂层金属 测试方法 耐湿性

Coil coated metals. Test methods. Resistance to humidity

手提式灭火器 第5部分 规范和补充测试

Portable fire extinguishers Part 5 . Specification and supplementary tests

干膜润滑剂试验方法钢试样腐蚀试验

Test method for dry film lubricants — Corrosion test on steels specimens

牙科学.金属材料的腐蚀试验方法

Dentistry. Corrosion test methods for metallic materials

石油及有关产品.耐火液压油液耐腐蚀性的测定.含水油液

Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids

金属和其他非有机涂层—适用于储存条件的腐蚀试验的一般规则

Metallic and other non - organic coatings — General rules for corrosion tests applicable for storage conditions

金属和合金的腐蚀 模拟深海水环境腐蚀试验指南和要求

Corrosion of metals and alloys. Guidelines and requirements for corrosion testing in simulated environment of deep-sea water

金属和合金的腐蚀 高温高压下铪耐腐蚀性能的测试方法

Corrosion of metals and alloys. Testing method of corrosion resistance for hafnium at high temperature and pressure

金属和合金的腐蚀 高温高压下铪耐腐蚀性能的测试方法

Corrosion of Metals and Alloys – Testing Method for Corrosion Resistance of Hafnium at High Temperature and Pressure

金属的腐蚀.电化学腐蚀试验

Corrosion of metals - Electrochemical corrosion tests

金属凃层 塑料材料上镍铬的电镀涂层和铜镍铬的电镀涂层

Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials

卷材涂层金属 试验方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity; German version EN 13523-25:2022

航天产品保证 镀银铜线和"红色瘟疫"腐蚀电缆敏感性的测定（草案）

Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion

航空航天系列.断路器.试验方法.第402部分:腐蚀

Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion; German and English version EN 3841-402:2004

航空航天系列断路器测试方法第402部分：腐蚀

Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion; German and English version EN 3841-402:2004 / Note: Applies in conjunction with DIN EN 3841-100 (2005-09).

环境试验.第2部分:试验.试验ke:流动混合气体腐蚀试验

Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test (IEC 60068-2-60:1995); German version EN 60068-2-60:1996

电子美利体育官网首页网址用连接器.试验和测量.第11-14部分:气候试验.试验11p:流动单气体腐蚀试验

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003

电子美利体育官网首页网址连接器 测试和测量 第11-14部分：气候测试 测试 11p：流动单一气体腐蚀测试

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 / Note: DIN EN 60512-11-14 (1997-06) remains valid alongs...

电子美利体育官网首页网址用连接器.试验和测量.第11-7部分:气候试验.试验11g:流动混合气体腐蚀试验

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003

电子美利体育官网首页网址连接器 测试和测量 第11-7部分：气候测试 测试 11g：流动混合气体腐蚀测试

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003 / Note: DIN EN 60512-11-7 (1996-08) remains valid alongside t...

光纤互连装置和无源元件 基本测试和测量程序 第 2-28 部分：测试 工业大气（二氧化硫）

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide)

光纤互连器件和无源元件. 基本试验和测量程序. 第2-28部分:试验. 工业大气 (二氧化硫) (IEC 61300-2-28-2013); 德文版本EN 61300-2-28-2013

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) (IEC 61300-2-28:2013); German version EN 61300-2-28:2013

蒸压加气混凝土和开放式结构轻骨料混凝土中钢筋腐蚀防护验证试验方法

Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure

防雷系统组件（LPSC）

Lightning protection system components (LPSC)

金属和合金的腐蚀 用于核动力反应堆的锆合金的水腐蚀试验（ISO/DIS 10270:2020）

Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/DIS 10270:2020); German and English version prEN ISO 10270:2020

金属基材上金属和其它无机覆层的腐蚀试验方法.腐蚀试验样品和生产产品的分级

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001

外科和牙科手持器械 耐高压灭菌、耐腐蚀和热暴露的测定

Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000

油漆和清漆 通过金属板上的涂层引入划线标记以进行腐蚀测试的指南（草案）

Guidelines for the introduction of scribe marks through coatings on metal panels for corrosion testing of paints and varnishes (Draft)

涂料和清漆—通过涂层引入金属板上的划痕进行腐蚀试验指南

Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

油漆和清漆 电镀涂料 第10部分：边缘保护

Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022); German version EN ISO 22553-10:2023

医疗器械制造用不锈钢针管 要求和测试方法

Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016); German version EN ISO 9626:2016

金属和合金的腐蚀.核动力反应堆用锆合金的水溶液腐蚀试验

Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997)

金属和合金的腐蚀.电化学试验方法.恒电位和动电位极化测量导则

Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements

环境试验 第2部分：试验方法 试验Kb：盐雾，交变（氯化钠溶液）

Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）

通用汽车材料规范：不锈钢表面装饰性镍铬镀层

Decorative Nickel Chrome Plating on Stainless Steel

环境测试 第2-60部分：测试 测试Ke：流动混合气体腐蚀测试

Environmental testing — Part 2-60: Tests — Test Ke: Flowing mixed gas corrosion test

防雷系统组件 (LPSC) 第7部分：接地增强化合物的要求

Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds

人工环境中特低浓度污染气体的腐蚀试验

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

金属与合金的腐蚀 核动力反应堆用锆合金的水腐蚀试验

Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

金属和合金的腐蚀.核电反应堆用锆合金的水腐蚀试验

Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

医疗器械的生物学评估 - 第15部分:金属和合金的降解产物的鉴别和定量

Biological evaluation of medical devices — Part 15: Identification and quantification of degradation products from metals and alloys

油漆和清漆 - 耐循环腐蚀条件的测定 - 第1部分:湿（盐雾）/干/湿

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid

色漆和清漆.耐循环腐蚀条件的测定.第3部分:汽车结构材料和部件涂层系统的试验

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction

外科和牙科手动器械——耐高压灭菌、腐蚀和热暴露的测定

Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure

金属和合金的腐蚀.腐蚀数据分析的统计学应用指南

Corrosion of metals and alloys - Guidelines for applying statistics to analysis of corrosion data

涂料和清漆.在缓冲氯化钠溶液中反复腐蚀以及从该溶液中清除的腐蚀试验

Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

金属和合金的腐蚀 人工大气中的腐蚀 在湿度循环和间歇性喷洒盐溶液的受控条件下进行加速腐蚀试验

Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

色漆和清漆.腐蚀试验用金属板涂层划痕标记导则

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

金属和合金的腐蚀.潮湿气氛中的二氧化硫试验（固定气体法）

Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)

色漆和清漆.电沉积涂层.第10部分:边缘保护

Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection

涂料和清漆. 涂层老化评估. 缺陷数量和大小以及外观均匀变化程度命名. 第1部分: 通用介绍和命名系统

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system

金属和合金的腐蚀 模拟深海水环境腐蚀试验指南和要求

Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water

液化石油气.对铜的腐蚀性.铜片试验

Liquefied petroleum gases - Corrosiveness to copper - Copper strip test

航空和航天；可硬化不锈钢零件的表面处理

Aerospace — Surface treatment of hardenable stainless steel parts

人工气候条件下的腐蚀试验——盐雾试验修订版1：警告注释

Corrosion tests in artificial atmospheres — Salt spray tests AMENDMENT 1: Footnote of Warning

金属和合金的腐蚀 高温高压下铪耐腐蚀性能的试验方法

Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure

牙科 - 牙科汞合金的腐蚀试验方法

Dentistry — Corrosion test methods for dental amalgam

金属带材卷 试验方法 第25部分 耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

架空线路 未绝缘铝线、铝合金线和钢线的防护油脂要求（IEC 61394:2011）

Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors (IEC 61394:2011)

材料选择与化学过程工业中的镍合金应用

Material selection and nickel alloy applications in the chemical process industry

腐蚀数据库输入数据收集和编制格式的标准实践

Standard Practice for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

卷材涂层板 测试方法 第25部分：耐湿性

Pre-coated sheets - Test methods - Part 25: Resistance to humidity

卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25 : resistance to humidity

以合格为目的评估电连接器和附件腐蚀试验的航空航天信息报告

Aerospace Information Report on Evaluating Corrosion Testing of Electrical Connectors and Accessories for the Purpose of Qualification

采用浸没法的飞行器和航空航天元部件用液态除锈剂混合物

Compound@ Rust Remover@ Liquid Aircraft and Aerospace Components@ Immersion Tank Method

固体跑道除冰/防冰产品

Solid Runway Deicing/Anti-icing Product

飞机外表面清洁剂 乳液，压力喷雾型

Cleaner for Aircraft Exterior Surfaces Emulsion, Pressure-Spray Type

飞机外表面清洁剂 Wipe-On, Wife-Off

Cleaner for Aircraft Exterior Surfaces Wipe-On, Wife-Off

飞机玻璃窗清洁剂

Cleaner, Aircraft Glass Window

飞机部件清洗剂冷槽型 溶剂型

Cleaner for Aircraft Components Cold Tank Type@ Solvent-Base

镁合金硬质阳极氧化膜 碱性、高压

Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage

铝和铝合金的硬质阳极涂层

Hard Anodic Coating on Aluminum and Aluminum Alloys

铝合金硫酸工艺阳极处理，染色涂层

Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings

铝合金通用涂层的化学膜处理

Chemical Film Treatment for Aluminum Alloys General Purpose Coating

铝补漆液发黑液

Blackening Solution for Aluminum Touch-Up Solution

聚四氟乙烯（PTFE）树脂涂层 Low Build 370 to 400°C（698 to 752°F）Fusion

Polytetrafluoroethylene (PTFE) Resin Coating@ Low Build@ 370 to 400 °C (698 to 752 °F) Fusion

聚四氟乙烯（PTFE）树脂涂层 High Build 698 至 752°F（370 至 400°C）融合

Polytetrafluoroethylene (PTFE) Resin Coating High Build@ 698 to 752 °F (370 to 400 °C) Fusion.

氯丁橡胶（CR）耐候性 75 85

Chloroprene (CR) Rubber Weather Resistant 75 - 85

铝合金，板 6.2Zn 2.3Cu 2.2Mg 0.12Zr（7050-T7451）固溶热处理、应力消除和过时效（UNS A97050）

Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged (UNS A97050)

铝合金融轧板 7.9Zn 1.8Cu 2.0Mg 0.10Zr (7099-T7451) 固溶热处理、应力时效和超时效处理

Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451), Solution Heat Treated, Stress Relieved, and Overaged

飞机表面复合清洁泡沫

Compound@ Cleaning@ Foaming@ for Aircraft Surfaces

汽车和非公路空气制动油箱性能和识别要求.卡车和客车

Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements - Truck and Bus

腐蚀测试大师建立

Corrosion Test Master Establishment

评估 MAC 冷凝器腐蚀行为的测试程序

Test Procedure for Evaluating Corrosion Behavior of MAC Condensers

铝和铝合金 海洋应用（造船、海洋和近海）锻造和铸造产品规范

Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)

卷材涂层金属 试验方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

牙科 金属材料的腐蚀试验方法（ISO 10271:2020）

Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020)

涂料和清漆 金属板通过涂层引入记号以进行腐蚀试验的指南（ISO 17872:2019）

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)

软钎剂 试验方法 第12部分:钢管腐蚀试验(ISO 9455-12:1992)

Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992)

金属和合金的腐蚀 深海水环境中金属和合金腐蚀试验指南（ISO 23226:2020 等同）

Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water (ISO 23226:2020, IDT)

腐蚀测试后涂层钢测试面板划痕下切评估方法

Method for Evaluating Scribe Undercutting on Coated Steel Test Panels Following Corrosion Testing

低合金结构钢腐蚀试验 第10部分：缝隙腐蚀试验方法

Corrosion test of low alloy structure steels -- Part 10: Test method of crevice corrosion

卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

空间产品保证 腐蚀

Space product assurance - Corrosion (Endorsed by Asociación Espa?ola de Normalización in February of 2019.)

Powertrack 系统 第1部分：一般要求

Powertrack systems - Part 1: General requirements

在污染气体浓度极低的人造大气中进行腐蚀试验（ISO 10062:2006）

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006)

油漆和清漆 通过交替浸入缓冲氯化钠溶液和从中取出进行腐蚀测试（ISO 15710:2002）

Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)

油漆和清漆 耐液体性的测定 第2部分：水浸法

Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)

卷材涂层金属 试验方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity