在严格定义条件下使材料与浸出剂接触并提取部分物质的测试方法。作为抽象名词,描述标准化美利体育登录入口官网程序概念。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ANSI/ANS 16.1-2019 试验标准 |
Measurement of the Leachability of Solidified Low- Level Radioactive Wastes by a Short-Term Test Procedure
|
2019 美国国家标准学会 |
| BS EN 12457-1:2002 试验 |
废弃物的特性.浸析.颗粒废弃物和污泥浸析的符合性试验.高固体含量和粒径小于4 mm的材料在液体,固体比为2 l/kg时的一级分批试验(有或无尺寸减小) Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with s
浸出液 液固比 |
2002-10-15 英国标准学会 |
| BS EN 12457-2:2002 试验 |
废弃物的特性.浸析.颗粒废弃物和污泥浸析的一致性试验.高固体含量和粒径小于4 mm的材料在液体,固体比为10 l/kg时的一级分批试验 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
浸出液 |
2002-10-15 英国标准学会 |
| BS EN 12457-3:2002 试验 |
废弃物的特性.浸析.颗粒废弃物和污泥浸析的一致性试验.高固体含量和粒径小于4 mm的材料在液体,固体比为2 l/kg和8 l/kg时的二级分批试验 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (wi
浸出液 |
2002-10-15 英国标准学会 |
| BS EN 12457-4:2002 试验 |
废弃物的特性.浸析.颗粒废弃物和污泥浸析的一致性试验.粒径小于10 mm材料在液体,固体比为10 l/kg时的一级分批试验 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
浸出液 |
2002-10-15 英国标准学会 |
| BS EN 62561-7:2012 试验 |
Lightning Protection System Components (LPSC). Requirements for earthing enhancing compounds
接地增强化合物 |
2012-04-30 英国标准学会 |
| BS EN ISO 12782-5:2012 试验标准 |
土壤质量.土壤和材料成分的浸出和物种形成的地球化学模型参数.来自含水试样的腐殖质萃取 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of humic substances from aqueous samples
腐殖质 |
2012-06-30 英国标准学会 |
| BS EN ISO 18772:2014 试验 |
土壤质量 土壤和土壤材料后续化学和生态毒理学测试的浸出程序指南 Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
源项 |
2014-05-31 英国标准学会 |
| BS EN ISO 21268-4:2019 试验 |
土壤质量 土壤和类土材料后续化学和生态毒理学测试的浸出程序 pH 对初始酸/碱添加的浸出的影响 Soil quality. Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Influence of pH on leaching with initial acid/base addition
浸提液 |
2019-12-31 英国标准学会 |
| DIN CEN/TS 16637-1:2014*DIN SPEC 18046-1:2014 指南标准 |
建筑产品 危险物质释放评估 第1部分:浸出试验和附加试验步骤确定指南 Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps
建筑材料 |
2014 德国标准化学会 |
| DIN EN 12457-1:2003 试验 |
废弃物表征.浸析.颗粒废弃物和污泥浸析一致性试验.第1部分:粒径小于4mm的材料在液体、固体比为2 l/kg的一级分批试验(有或无粒径缩减) Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
浸出液 液固比 |
2003-01 德国标准化学会 |
| DIN EN 12457-2 E:2000-02 试验 |
废弃物表征 浸析 颗粒废弃物和污泥浸析一致性试验 第2部分:粒径小于4mm的材料在液体、固体比为10 l/kg的一级分批试验 (有或无粒径缩减) (草案) Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction)
浸出液 液固比 |
2000-02 德国标准化学会 |
| DIN EN 12457-2:2003 试验 |
废弃物表征.浸析.颗粒废弃物和污泥浸析一致性试验.第2部分:粒径小于4mm的材料在液体、固体比为10 l/kg的一级分批试验(有或无粒径缩减) Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
浸出液 |
2003-01 德国标准化学会 |
| DIN EN 12457-3 E:2000-02 试验 |
废弃物特性 浸析 颗粒废弃物和污泥浸析的一致性试验 第3部分:高固体含量的粒径小于4mm的材料在液体与固体比为 2 l/kg 和 8 l/kg 时的二级分批试验 (有或无粒径缩减) (草案) Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm
浸出液 液固比 |
2000-02 德国标准化学会 |
| DIN EN 12457-4 E:2000-02 试验 |
废物表征——浸出;粒状废物和污泥释放符合性试验第4部分:对于粒径低于10毫米的材料(无或有限制尺寸的材料) 液固比为10升/千克的一级批量试验(草案) Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size r...
浸出液 液固比 |
2000-02 德国标准化学会 |
| DIN EN 16637-1:2021 试验标准 |
建筑产品 危险物质释放的评估 第1部分:确定浸出测试和附加测试步骤的指南 Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps; German and English version prEN 16637-1:2021
危险物质 建筑产品 |
2021-03-01 德国标准化学会 |
| DIN EN 16637-1:2021-03 试验标准 |
建筑产品 危险物质释放评估 第1部分:浸出试验和附加试验步骤确定指南 Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps; German and English version prEN 16637-1:2021 / Note: Date of issue 2021-02-05*Intended as rep...
建筑产品 |
2021-03 德国标准化学会 |
| DIN EN 17195:2022-06 试验标准 |
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates; German and English version prEN 17195:2022 / Note: Date of issue 2022-05-06*Intended as replacement for DIN CEN/TS 17195 (2019-03).
建筑产品 |
2022-06 德国标准化学会 |
| DIN EN ISO 21268-4 E:2018-03 试验标准 |
土壤质量 土壤和类土材料后续化学和生态毒理学测试的浸出程序 第4部分:初始酸/碱添加时 pH 对浸出的影响(草案) Soil Quality Leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil-like materials Part 4: Effect of pH on leaching during initial acid/base addition (draft)
浸出液 |
2018-03 德国标准化学会 |
| DIN SPEC 1128 DIN ISO TS 21268-1:2010-10 试验 |
土壤质量 土壤和土壤材料的淋溶程序 第一部分:2 l/kg干物质体积比的批次试验 (ISO/TS 21268-1:2007) Soil quality - Leaching procedures for soils and soil materials - Part 1: Batch test with a volume ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007)
浸出剂 浸出液 |
2010-10 德国标准化学会 |
| DIN SPEC 1128:2010 试验 |
Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007); German version CEN ISO/TS 21268-1:2009
浸出液 |
2010-02 德国标准化学会 |
| DIN SPEC 1129 DIN ISO TS 21268-2:2010-02 试验 |
土壤质量 对随后进行的化学和生态毒性试验的土壤及土壤材料淋溶程序 第2部分:10 l/kg 干物质的液固比批次测试 (ISO/TS 21268-2:2007) Soil quality - Leaching procedures for soils and soil materials for subsequent chemical and ecotoxicity testing - Part 2: Batch test with a liquid-to-solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007)
浸出剂 浸出液 |
2010-02 德国标准化学会 |
| DIN SPEC 1129:2010 试验 |
土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第2部分:液固比为101/kg干物质的批量试验(ISO/TS 21268-2-2007).德文版本CEN ISO/TS 21268-2-2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007); German version CEN ISO/TS 21268-2:2009
浸出剂 浸出液 |
2010-02 德国标准化学会 |
| DIN SPEC 1130:2010 试验 |
土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第3部分:上流过滤试验(ISO/TS 21268-3-2007).德文版本CEN ISO/TS 21268-3-2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007); German version CEN ISO/TS 21268-3:2009
|
2010-02 德国标准化学会 |
| EN 12457-2:2002 试验 |
废物特性.浸出.粒状废料和残渣浸出的符合性试验第2部分:在10 l/kg的液固比下对粒子尺寸小于4mm的(没有或有尺寸缩减)材料进行一级批量试验 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for material with particle size below 4 mm (without or with size reduction)
浸出液 |
2002-09-01 欧洲标准化委员会 |
| IEC 62561-7:2024 试验标准 |
Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds
接地增强化合物 腐蚀测试 |
2024-02-22 国际电工委员会 |
| ISO 21268-3:2019 试验 |
土壤质量.土壤和土壤类材料的后续化学和生态毒理试验的浸出程序.第3部分:上流渗滤试验 Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 3: Up-flow percolation test
|
2019-09-04 国际标准化组织 |
| ISO/TS 21268-1:2007 试验 |
土质.土壤和土壤材料连续化学和毒物学测试用浸出过程.第1部分:液固比为2 1/kg干物质的批量试验 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter
浸出剂 浸出液 |
2007-07 国际标准化组织 |
| ISO/TS 21268-2:2007 试验 |
土质.土壤和土壤材料连续化学和毒物学测试用浸出过程.第2部分:液固比为10 1/kg干物质的批量试验 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
浸出剂 浸出液 |
2007-07 国际标准化组织 |
| ISO/TS 21268-4:2007 试验 |
土质 土壤和土壤材料连续化学和毒物学测试的 第4部分 pH值对初始渗出酸/碱性添加物的影响 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of pH on leaching with initial acid/base addition
浸出剂 浸出液 |
2007-11 国际标准化组织 |
| JIS K 6792:2004 AMD 1:2009 试验标准 |
Polybutene (PB) pipes for water supply (Amendment 1)
性能 |
2009-03-20 日本工业标准调查会 |
| LST EN 12457-2:2003 试验 |
废弃物表征 浸出 粒度大于4毫米的浸出物与污泥成分符合性测试 第2部分:单次批量(样品)测试 液固比为10升/千克 且颗粒尺寸小于4毫米 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
浸出液 |
2003-12-29 立陶宛标准局 |
| LST EN 12457-4:2003 试验 |
废物特性 浸出 从颗粒废物浸出物质和污泥成分符合性测试 第4部分:液固比为 10 升/千克且颗粒尺寸小于 10 毫米的单一批次(样品)测试 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
浸出液 |
2003-12-29 立陶宛标准局 |
| LST EN ISO 21268-1:2019 试验 |
土壤质量 用于后续土壤及其物质的化学和生态毒理学研究的浸出程序 第1部分:在2升/千克干物质液固比下的批次测试(ISO 21268-1:2019)…… Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO 21268-1:2019)
浸出液 |
2019-12-31 立陶宛标准局 |
| LST EN ISO 21268-2:2019 试验 |
土壤质量 用于后续化学和生态毒性土壤及其物质分析的浸提程序 第2部分:按10 L/kg干物质的液固比进行批次分析(ISO 21268-2:2019).. Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like material - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO 21268-2:2019)
浸出液 |
2019-12-31 立陶宛标准局 |
| LST EN ISO 21268-3:2019 试验 |
土壤质量 用于后续化学和生态毒理学土壤及其物质分析的淋溶程序 第3部分:上升流渗滤试验(ISO 21268-3:2019) Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 3: Up-flow percolation test (ISO 21268-3:2019)
浸出剂 浸出液 |
2019-12-31 立陶宛标准局 |
| LST EN ISO 21268-4:2020 试验 |
土壤质量 用于后续化学和生态毒理学土壤及其物质分析的淋溶程序 第4部分:添加酸或碱对淋溶的pH影响(ISO 21268-4:2019) Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 4: Influence of pH on leaching with initial acid/base addition (ISO 21268-4:2019)
浸出液 |
2020-02-28 立陶宛标准局 |
| PD CEN/TS 16384:2012 试验标准 |
Synthetic sport systems - Leaching test
|
2012-08-01 英国标准学会 |
| PD CEN/TS 16637-1:2018 试验标准 |
建筑产品 评估危险物质的释放 浸出测试和附加测试步骤的确定指南 Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps
建筑产品 有害物质 |
2018-10-01 英国标准学会 |
| PD CEN/TS 16675:2018 试验标准 |
Waste. Test methods for the determination of the monolithic status of waste to be landfilled
|
2018-08-01 英国标准学会 |
| SIS-CEN/TR 16192:2020 指南标准 |
Waste - Guidance on analysis of eluates
浸出液 |
2020 瑞典标准研究所 |
| SS-EN 12457-2:2003 试验标准 |
废物特性 沥出 颗粒废料和污泥沥出的合规性试验 第2部分:对于颗粒尺寸小于 4 毫米(无或有尺寸减。┑牟牧 在液固比为 10 l/kg 的情况下进行单阶段批量试验 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
废物 浸出液 |
2003 瑞典标准研究所 |
| SS-EN 12457-4:2003 试验 |
废物特性 沥出 颗粒废料和污泥沥出的合规性试验 第4部分:对于颗粒尺寸小于 10 毫米(无或有尺寸减。┑牟牧 在液固比为 10 升/千克下的单阶段批量试验 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
浸出液 |
2003 瑞典标准研究所 |
| SS-EN ISO 18772:2014 指南标准 |
土壤质量 土壤和土壤材料后续化学和生态毒理学测试的浸出程序指南(ISO 18772:2008) Soil quality - Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials (ISO 18772:2008)
浸出行为 |
2014-03-31 瑞典标准研究所 |
| SS-EN ISO 21268-4:2019 试验标准 |
土壤质量 土壤及其类似材料的后续化学和生态毒理学试验的淋洗程序 第4部分:初始酸/碱添加对pH影响的淋洗(ISO 21268-4:2019) Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 4: Influence of pH on leaching with initial acid/base addition (ISO 21268-4:2019)
浸出液 浸出物 |
2019 瑞典标准研究所 |
| SS-ISO 18772:2008 指南 |
土壤质量 土壤和土壤材料后续化学及生态毒性测试的淋洗程序指南(ISO 18772:2008 等同采用) Soil quality - Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials (ISO 18772:2008, IDT)
源项 |
2008 瑞典标准研究所 |
| UNE-EN 12873-4:2007 试验 |
材料对人类饮用水的影响 迁移影响 第4部分:水处理膜的试验方法 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
|
2007-01-17 西班牙标准化协会 |
| UNE-EN IEC 62561-7:2018 试验标准 |
Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds
接地增强化合物 |
2018-09-19 西班牙标准化协会 |
| UNE-EN ISO 21268-3:2019 试验标准 |
土壤质量 土壤和类土材料后续化学和生态毒理学测试的浸出程序 第3部分:上流渗滤测试 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 3: Up-flow percolation test (ISO 21268-3:2019) (Endorsed by Asociación Espa?ola de Normalización in November of 2019.)
浸出液 液固比 |
2019-11-01 西班牙标准化协会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-11 09:10