美利体育登录入口官网

涂层在海洋环境中的失效评估新方法

A new method for failure assessment of coatings in marine environments

用美国油墨研究会研磨测量计测定油墨研磨细度的标准试验方法

Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

腐蚀环境中涂漆或覆层试样评估的标准试验方法

Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

航空航天玻璃外壳划痕强度的标准试验方法

Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures

航空航天用透明塑料抗划痕硬度的标准试验方法

Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

涂料和清漆.用光学成象评定涂层表面缺陷.划痕周围剥层和腐蚀的评定

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of delamination and corrosion around a scribe

涂料和清漆.用光学成像评估涂覆表面的缺陷.丝状腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of filiform corrosion

塑料. 划痕损伤和划痕可见性的定量评估

Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility

采用线性磨耗试验机 (摩擦掉色测定器) 的划痕试验

Scratch test using a linear abrasion tester (crockmeter)

涂料和清漆 使用硬度笔进行的划痕试验

Paints and varnishes - Scratch test using a hardness pen

涂料和清漆. 使用硬度笔进行的划痕试验

Paints and varnishes - Scratch test using a hardness pen

航空航天 表面保护涂层的试验方法 油漆和清漆 第5部分：涂层阻力试验

Aerospace - Methods of test for surface protective coatings; Paints and varnishes - Part 5: Coating resistance tests

航空航天-表面保护涂层的测试方法

Aerospace - Methods of test for surface protective coatings; Paints and varnishes - Part 5: Coating resistance tests

卷材镀层金属.试验方法.第12部分:耐划痕;德文版本EN 13523-12-2017

Coil coated metals - Test methods - Part 12: Resistance to scratching; German version EN 13523-12:2017

卷材涂层金属-试验方法-第8部分：耐盐雾（雾）

Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2017

弹性地板覆盖物.基于合成热塑性聚合物的地板覆盖物.规范

Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification; German version EN 14565:2004

弹性地板覆盖物 基于合成热塑性聚合物的地板覆盖物 规范

Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification; German version EN 14565:2019

家具.表面耐划痕的评定.德文版本EN 15186-2012

Furniture - Assessment of the surface resistance to scratching; German version EN 15186:2012

家具 评估表面耐刮擦性

Furniture - Assessment of the surface resistance to scratching; German version EN 15186:2012 / Note: To be replaced by DIN EN 15186 (2022-11).

弹性地板覆盖物 异质聚氨酯地板覆盖物 规范（草案）

Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification

光纤转接美利体育官网首页网址和无源组件.基本试验和测量规程.第3-35部分:检验和测量.光纤园柱状连接器端面外观检查和自动检查(IEC 61300-3-35-2009).德文版本EN 61300-3-35-2010

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection (IEC 61300-3-35:2009); German version EN 61300-3-

涂料和清漆.用防护涂料系统对钢结构件进行的防腐蚀保护.第6部分:实验室性能试验方法(ISO 12944-6-2018); 德文版本EN ISO 12944-6-2018

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018); German version EN ISO 12944-6:2018

油漆和清漆.耐擦伤性的测定.第2部分:电动载荷法(ISO 1518-2-2011).德文版 EN ISO 1518-2-2011

Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011); German version EN ISO 1518-2:2011

色漆和清漆.在缓冲氯化钠溶液中反复腐蚀以及从该溶液中清除的腐蚀试验

Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002); English version of DIN EN ISO 15710:2006-09

涂料和清漆.腐蚀测试用金属板涂层上划线标志的入门指南

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007);English version of DIN EN ISO 17872:2007-06

色漆和清漆 使用实验室规模的洗车机测定涂层系统的抗划伤性（草案）

Determination of scratch resistance of paint and varnish coating systems using a laboratory-scale car wash (draft)

涂料和清漆.用光学成像评估涂覆表面的缺陷.第3部分:划痕周围剥离和腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007); German version EN ISO 21227-3:2007

油漆和清漆 使用光学成像评估涂层表面的缺陷 第3部分：划线周围分层和腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007); German version EN ISO 21227-3:2007

涂料和清漆.用光学成象评定涂层表面缺陷.第4部分:丝状腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008); English version of DIN EN ISO 21227-4:2008-06

油漆和清漆 使用光学成像评估涂层表面的缺陷 第4部分：丝状腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008); German version EN ISO 21227-4:2008

涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底(ISO 4623-2-2016).德文版本EN ISO 4623-2-2016

Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016); German version EN ISO 4623-2:2016

涂覆材料 防护层损坏的评估 损坏的数量和大小以及外观均匀变化的程度的评价 第10部分：线性腐蚀的评估 (ISO/DIS 4628-10:2014)

Evaluation of damage to protective coatings on coated materials - Evaluation of the number and size of damage and the degree of uniform change in appearance - Part 10: Evaluation of linear corrosion (ISO/DIS 4628-10:2014)

涂漆和清漆 漆膜降解的评定 缺陷量值、大小以及外观均匀改变程度的规定 第8部分：划痕或其他人工缺陷周围脱层和腐蚀度的评估（草案）

Provisions for assessing the magnitude, size and degree of uniform change in appearance of paint and varnish film degradation - Part 8: Assessment of delamination and corrosion around scratches or other artificial defects (draft)

涂漆和清漆 漆膜降解的评定 缺陷量值、大小以及外观均匀改变程度的规定 第8部分：划痕或其他人工缺陷周围脱层和腐蚀度的评估

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial

油漆和清漆 涂层降解的评估 缺陷数量和尺寸的指定 以及外观均匀变化的强度 第8部分：划线或其他人工制品周围分层和腐蚀程度的评估

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artifici...

无损美利体育登录入口官网 工业内窥镜目视美利体育登录入口官网 第2部分:图谱

Non-destructive testing—Industrial endoscopy visual testing—Part 2: Atlas

腐蚀/下蚀刻 刻痕蠕变回退试验程序

Corrosion/Etch Notch Creep Regression Test Procedure

光纤互连器件和无源组件.基本试验和测量规程.第3-44部分:检查和测量.光纤收发器接收器端面可视化和自动检验

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection

纤维光学互连器件和无源元件第05部分:污染和划痕对单模（SM）和多模（MM）连接器光学性能影响的研究

Fibre optic interconnecting devices and passive components - Part 05: Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors

纤维光学互连器件和无源元件.自动显微镜对连接器端面划痕识别和验证的循环试验结果总结

Fibre optic interconnecting devices and passive components - Summarising results of round robin on connector end face scratch recognition and verification by automated microscopes

用于地面和墙面铺贴的陶瓷制品 按莫氏标度测定表面划痕硬度

Cerámicos para revestimientos de pisos y paredes. Determinación de la dureza al rayado de la superficie, según la escala de Mohs.

涂料和清漆.抗划伤性测定

Paints and varnishes - Determination of mar resistance

无机和蓝宝石表玻璃.第3部分:定性标准和试验方法

Mineral and sapphire watch-glasses - Part 3: Qualitative criteria and test methods

涂料和清漆.抗划伤性测定.第2部分:可变负荷法

Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method

涂料和清漆.在缓冲氯化钠溶液中反复腐蚀以及从该溶液中清除的腐蚀试验

Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

结构胶黏剂.粘接前金属和塑料表面处理导则

Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

色漆和清漆.腐蚀试验用金属板涂层划痕标记导则

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

塑料.划痕性能的测定

Plastics - Determination of scratch properties

涂料和清漆.用光学成像法评估涂覆表面的缺陷.第3部分:划痕周围分层和腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe

涂料和清漆.用光学成像评估涂覆表面的缺陷.第4部分:丝状腐蚀的评估

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion

涂料和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀变化程度的规定.第8部分:评定划痕周围的层离和腐蚀等级

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial

热塑性地面材料 基于合成热塑性聚合物的地面材料 规格

Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification

热固性地面涂料 多色聚氨酯地面涂料 规格

Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification

涂料和清漆 通过涂层在金属板上引入划痕用于腐蚀测试的指南（ISO 17872:2019）

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)

油漆和清漆 耐丝状腐蚀的测定 第1部分：钢基体（ISO 4623-1:2018）

Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018)

油漆和清漆 涂层硬度和耐磨性测试方法概述

Paints and varnishes. Overview of test methods on hardness and wear resistance of coatings

光纤互连装置和无源元件 研究污染和划痕对单模(SM)和多模(MM)连接器光学性能的影响

Fibre optic interconnecting devices and passive components. Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors

出口不锈钢装饰板表面质量检验规程

Rules for the inspection of surface quality of stainless steel decorated sheet for export

弹性地面覆盖物 基于合成热塑性聚合物的地面覆盖物 规格

Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification

弹性地板覆盖物 异质聚氨酯地板覆盖物 规格

Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification

涂料和清漆 金属板通过涂层引入记号以进行腐蚀试验的指南（ISO 17872:2019）

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)

油漆和清漆 耐擦伤性的测定（ISO 12137:2011）

Paints and varnishes - Determination of mar resistance (ISO 12137:2011)

油漆和清漆 通过交替浸入缓冲氯化钠溶液和从中取出进行腐蚀测试（ISO 15710:2002）

Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)

油漆和清漆 使用光学成像评估涂层表面的缺陷 第3部分：划线周围的分层和腐蚀评估（ISO 21227-3:2007）

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)