美利体育登录入口官网

减轻模块化施工中法兰面腐蚀

Mitigating flange corrosion in modular construction

评估海洋环境中的钢筋混凝土桥梁腐蚀预防和控制方案

Evaluation of Corrosion Prevention and Control Programs for Reinforced Concrete Bridges in Marine Environments

热浸镀锌铝镁合金薄钢板的标准规范

Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

碳钢管热喷铝（TSA）涂层应用的标准实施规程

Standard Practice for Application of Thermal Spray Aluminum (TSA) Coating to Carbon Steel Pipe

现场螺栓连接管、管拱和拱用镀锌波纹钢结构板的标准规范

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

锻钢管件通用要求的标准规范

Standard Specification for Common Requirements for Wrought Steel Piping Fittings

镉-锌机械沉积镀层的标准规格

Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

锌铁合金镀层电沉积涂层的标准规范

Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits

在镁和镁合金上涂覆非电解转化涂层的标准实施规程

Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

镁合金锻件的标准规格

Standard Specification for Magnesium-Alloy Forgings

使用水浸涂层测试耐水性的标准实践

Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

紧固件用磷酸盐/油防蚀镀层的标准规格

Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

紧固件用磷酸盐/油腐蚀保护涂层的标准规范

Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

牺牲锌合金阳极标准规范

Standard Specification for Anodes, Sacrificial Zinc Alloy

紧固件用带有或者不带有整体润滑剂防腐蚀涂层的无铬锌片复合材料的标准规格

Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

美国材料与试验协会出版物 STP 1100

Extending the Life of Bridges

钢构涂层保护新概念

New Concepts for Coating Protection of Steel Structures

污水厂钢件防腐涂层及覆盖层建议

Recommendations for corrosion protection of steel parts in wastewater treatment plants by coatings and linings

钢制水管：设计和安装指南 (M11) 第五版 包括勘误表 (2018)

Steel Water Pipe: A Guide for Design and Installation (M11), Fifth Edition, Includes Errata (2018)

工业美利体育官网首页网址防腐蚀介质腐蚀用有机涂层系统和内衬.衬底的术语、设计和制备

0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Terminology, design and preparation of substrate

用于保护和修复混凝土结构的产品和系统 — 定义、要求、质量控制和合格评定 第9部分：产品和系统使用的一般原则

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity Part 9 : General principles for use of products and systems

工业阀门 执行器 用于工业阀门的液压部分回转执行器 基本要求

Industrial valves. Actuators - Hydraulic part-turn actuators for industrial valves. Basic requirements

灯柱.钢灯柱的要求

Lighting columns - Requirements for steel lighting columns

镀锌制品.构筑物的钢铁腐蚀防护用指南及推荐规范.镀锌粉

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Sherardizing

在涂漆和相关产品应用前对钢材基材的准备 表面清洁度的目视评估 焊接部位、边缘及其他有表面缺陷区域的准备等级

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness - Preparation grades of welds, edges and other areas with surface imperfections

砌体连接器

Connectors for masonry

在涂漆及有关产品应用前钢基材的准备 表面清洁度的目视评估 第3部分：焊缝、边缘及其他有表面缺陷区域的准备等级

Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 3: Preparation grades of welds, edges and other areas with surface imperfections

工业锅炉腐蚀防护安全技术规范

Safety technical code for corrosion protection of industrial boilers

消毒剂金属腐蚀防护导则

Guidelines for the protection of metals from corrosion by disinfectants

石膏板上使用的附件.第1部分:钢板型材

Accessories for use with gypsum boards - Part 1: Steel plate sections

德国建筑包工合同程序(VOB) 第C部分：建筑包工合同通用技术规范(ATV) 钢结构工程

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Structural steelwork

德国建筑包工合同程序 (VOB) 第C部分：建筑包工合同 (ATV) 的通用技术规范 混凝土结构养护工程

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Repair work on concrete structures

德国建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).钢结构的防腐蚀

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures

德国建筑包工合同程序 (VOB). 第C部分:建筑包工合同 (ATV) 的通用技术规范. 防雷系统的安装

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of lightning protection systems

土壤质量 电力塔防腐措施要求 以保护土壤免受污染物输入

Soil quality - Requirements for corrosion protection measures on electricity pylons to protect the soil from pollutant inputs / Note: Date of issue 2021-06-25

铁路车辆及其组件的设计指南.螺栓连接.第5部分:防腐蚀

Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion

钢管和配件的聚乙烯涂层 第2部分：工厂应用烧结或火焰喷涂涂层的要求和测试

Polyethylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings

钢管和管件的聚乙烯涂层 第 2 部分：工厂应用的烧结或火焰喷涂涂层的要求和测试

Polyethylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings / Note: This standard is part of the DVGW body of rules.

钢管和配件的聚丙烯涂层 第 1 部分：工厂应用的挤压涂层的要求和测试

Polypropylen coatings of steel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings / Note: This standard is part of the DVGW body of rules.

生水和饮用水用阀门和接头.粉漆及环氧内涂防腐层.要求和检验

Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests

金属腐蚀 涂层金属材料在水性介质腐蚀作用下的腐蚀防护试验和评定

Corrosion of metals - Testing and assessment of the corrosion protection of coated metallic materials under corrosive action by aqueous media

油漆、清漆和涂料 钢制支撑薄壁建筑构件的腐蚀防护 第2部分：监视和认证要求

Paints, varnishes and coatings - Corrosion protection of supporting thin-walled building components made of steel - Part 2: Surveillance and certification requirements

船舶和海洋技术 管道的防腐施工活动和调试 第2部分：铁基合金制成的管道系统

Ships and marine technology - Corrosion preventing construction activities and commissioning of pipelines - Part 2: Piping systems made of iron-based alloys

供气系统 最大允许工作压力不超过 16 bar 的管道 第3部分：钢的特殊功能建议

Gas supply systems Pipes with a maximum permissible operating pressure up to and including 16 bar Part 3: Special functional recommendations for steel

建筑业轴承.第9部分:防护

Structural bearings - Part 9: Protection; German version EN 1337-9:1997

金属工业管道.第6部分:埋管的附加要求.德文版本EN 13480-6-2012;DIN EN 13480-6-2014-12的勘误

Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2012; Corrigendum to DIN EN 13480-6:2014-12

金属腐蚀防护 在钢铁部件上采用非电解锌片涂层

Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components; German version EN 13858:2006

木结构 销型紧固件 要求

Timber structures - Dowel-type fasteners - Requirements; German and English version prEN 14592:2017

球墨铸铁管、管件和附件球墨铸铁管件和附件有机涂层的要求和试验方法第2部分：热塑性酸改性聚烯烃涂层（TMPO）（草案）

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)

工业阀门 执行器 第4部分：用于工业阀门的液压部分回转执行器 基本要求 德语版本 EN 15714-4:2025

Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements; German version EN 15714-4:2025

航天产品保证 腐蚀；英文版 EN 16602-70-14:2018

Space product assurance - Corrosion; English version EN 16602-70-14:2018

欧洲规范 9：铝结构的设计和施工 第1部分：一般设计规则

Eurocode 9: Design and construction of aluminum structures – Part 1-1: General design rules

灯柱 第5部分：钢制灯柱要求

Lighting columns - Part 5: Requirements for steel lighting columns

灯柱第5部分：钢灯柱的要求

Lighting columns - Part 5: Requirements for steel lighting columns; German version EN 40-5:2002

灯柱 第6部分：铝制灯柱要求（草案）

Lighting columns - Part 6: Requirements for aluminium lighting columns

灯柱第6部分：铝灯柱的要求

Lighting columns - Part 6: Requirements for aluminium lighting columns; German version EN 40-6:2002

航空航天系列-铝和铝合金锻合金的酒石酸-硫酸阳极氧化 用于防腐蚀和油漆预处理（TSA）

Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA); German and English version EN 4704:2012

航空航天系列 铝及铝合金无六价铬阳极氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version EN 4827:2019

航空航天系列 铝及铝合金的六价无铬阳极氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version EN 4827:2019 / Note: To be replaced by DIN EN 4827 (2021-01).

航空航天系列 铝及铝合金无六价铬阳极氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version prEN 4827:2020

航天系列-六价无铬底漆阳极电沉积

Aerospace series - Anodic electrodeposition of hexavalent chromium free primer; German and English version prEN 4868:2021 / Note: Date of issue 2021-06-18*Intended as replacement for DIN EN 4868 (2019-12).

油漆和清漆 通过防护漆系统对钢结构的腐蚀保护 第1部分：概述（ISO 12944-1:2017）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)

涂料和清漆 用防护涂料系统对钢结构件进行的防腐蚀保护 第3部分：设计考虑要素（草案）

Corrosion protection of structural steel members with protective coating systems using paints and varnishes Part 3: Design considerations (draft)

油漆和清漆.用防护涂料系统对钢结构件进行的防腐蚀保护.第3部分:设计考虑要素

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998); German version EN ISO 12944-3:1998

油漆和清漆 防护涂料系统对钢结构件的防腐蚀保护 第5部分：防护涂料系统（草案）

Corrosion protection of structural steel components by paint and varnish protective coating systems Part 5: Protective coating systems (draft)

油漆和清漆 防护涂料系统对钢结构件的防腐蚀保护 第5部分：防护涂料系统（草案）

Corrosion protection of structural steel components by paint and varnish protective coating systems Part 5: Protective coating systems (draft)

油漆和清漆.防护涂料系统对钢结构件的防腐蚀保护.第5部分:防护涂料系统

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2007); English version of DIN EN ISO 12944-5:2008-01

油漆和清漆 通过防护漆系统对钢结构的腐蚀防护 第5部分：防护漆系统（ISO 12944-5:2019）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)

油漆和清漆 通过防护涂料系统对钢结构进行腐蚀防护 第5部分：防护涂料系统

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019); German version EN ISO 12944-5:2019

金属及合金的腐蚀特性.基本术语与定义

Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999

涂装油漆和相关产品前钢基材的准备 表面清洁度的目视评定 第3部分：焊缝、边缘和其他有表面缺陷的区域的准备等级 (ISO/DIS 8501-3:2024)

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO/DIS 8501-3:2024); German and Engli...

在涂漆和相关产品应用前钢基材的制备 表面清洁度的目视评估 第3部分：焊缝、边缘及其他有表面缺陷区域的制备等级（ISO 8501-3:2025）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2025)

木结构. 木结构设计. 第100部分: 紧固件材料防腐蚀保护的最低要求

Timber structures - Design of timber structures - Part 100: Minimum requirements for the materials or corrosion protection of fasteners

木结构 木结构设计 第100部分：紧固件材料或腐蚀防护的最低要求

Timber structures - Design of timber structures - Part 100: Minimum requirements for the materials or corrosion protection of fasteners / Note: Applies in conjunction with DIN EN 1995-1-1 (2010-12), DIN EN 1995-1-1/NA (2013-08).

腐蚀防护中钢构涂层前表面美利体育登录入口官网 表面非视觉可识别污染的美利体育登录入口官网

Surface inspection of steel structures before coating in corrosion protection Detection of non-visually identifiable contamination on the surface

船舶防腐保护

Ship corrosion protection

船舶腐蚀防护指南

Corrosion protection of ships

最大允许工作压力至100bar的气体供应用截止阀门

Shut-off Valves for Maximum Operating Pressures up to 100bar for Gas Infrastructure

钢制管材天然气管道至16巴工作压力 建设

Steel pipe natural gas pipeline construction to 16 bar working pressure

燃气管道施工

Gas pipework made of steel pipes for an operating pressure up to and including 16 bar

设计压力大于16巴的钢质天然气高压管道安装

High Pressure Gas Steel Pipelines for a Design Pressure of More Than 16 bar; Construction

高压钢管燃气管道建设

Steel pipe gas pipelines construction for an operating pressure > 16 bar - Construction

监督质量保证的涂层和覆盖层工作 资质要求

Qualification requirements for overseeing quality assurance of coating and overlay work

评估埋地铸铁和低碳钢管道及储罐的腐蚀负荷

Evaluate corrosion loads on buried cast iron and mild steel pipelines and tanks

腐蚀防护用热喷涂涂层

Thermal spray coatings for corrosion protection

技术规则：输送危险液体的现有地下管道（TRwS）

Technical Rules: Existing underground pipelines conveying hazardous liquids (TRwS)

技术规定 (TRwS) 第 135/1997 号 现存无损地下的容器

Technical Regulation (TRwS) No. 135/1997 on existing intact underground containers

技术规程 现有地下管道（TRwS）

Technical Regulation for Existing Underground Pipelines (TRwS)

电力金具通用技术条件

General technical requirements for electric power fittings

军用飞机腐蚀防护设计和控制要求

Corrosion prevention and control requirements for military aircraft design

统一的防腐蚀和防老化系统 金属和非金属无机涂料、金属和合金 气候测试站的测试方法

Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings, metals and alloys. Test methods at climatic test stations

黑色塑料PVC或PE压力敏感防锈胶带

Black plastic PVC or PE pressure sensitive anti-rust tape

环境试验 第2-11部分:测试 测试Ka:盐雾

Environmental testing - Part 2-11: Tests - Test Ka: Salt mist

金属和合金的腐蚀-大气腐蚀防护方法选择指南

Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion

色漆和清漆.防护漆体系对钢结构的腐蚀防护.第3部分:设计内容

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations

石油和天然气工业，包括低碳能源 — 海上平台和陆上工厂的管道系统 — 第 2 部分：材料

Oil and gas industries including lower carbon energy — Piping systems on offshore platforms and onshore plants — Part 2: Materials

锌镀层.铁和钢结构中抗腐蚀保护的指南和建议.第1部分:设计和抗腐蚀一般原则

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance

石油, 石化和天然气工业. 钢储罐内涂层和内衬

Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks

紧固件. 术语. 第2部分: 镀层词汇和术语

Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings

二氧化碳捕获、运输和地质储存. 地质储存

Carbon dioxide capture, transportation and geological storage - Geological storage

在涂装和相关产品应用前钢基材的准备 表面清洁度的视觉评估 第3部分：焊缝、边缘和其他有表面缺陷区域的准备等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections

人造空气的腐蚀试验.盐雾试验

Corrosion tests in artificial atmospheres - Salt spray tests

人造大气中的腐蚀试验 - 盐雾试验

Corrosion tests in artificial atmospheres — Salt spray tests

金属和合金的腐蚀.使用消毒剂时的金属腐蚀防护概述

Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants

燃气基础设施 最大操作压力不超过16巴的管道 第3部分：施加于钢的特殊功能要求

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel

工业阀门 驱动装置 第4部分 工业阀门液压部分回转驱动装置 基本要求

Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements

宇宙产品质量保证 腐蚀

Space product assurance - Corrosion

架空线路导体 润滑剂特性

Conductors for overhead lines. Characteristics of greases

锌涂层 钢结构防腐蚀防护指南与建议 第1部分：设计一般原则与耐腐蚀性 (ISO 14713-1:2017)

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)

金属和合金的腐蚀 在酸雾、干燥和潮湿大气条件下加速的循环试验 (ISO 16151:2018)

Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018)

Plieninio pagrindo paruo?imas prie? padengiant da?ais ir su jais susijusiais produktais. Ap?iūrimasis pavir?iaus ?varumo vertinimas. 3 dalis. Siūli?, briaun? ir kit? zon? su pavir?iniais defektais paruo?imo laipsniai (ISO 8501-3:2025)

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2025)

页岩气 采集气系统腐蚀防护技术规范

Shale Gas Production System Corrosion Protection Technical Specification

工业阀门 执行器 第4部分：用于工业阀门的液压旋转执行器 基本要求

Industrial valves - Actuators - Part 4 : hydraulic part-turn actuators for industrial valves - Basic requirements

在涂漆和相关产品应用前钢基材的制备 表面清洁度的视觉评估 第3部分：焊缝、边缘及其他有表面缺陷区域的制备等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3 : preparation grades of welds, edges and other areas with surface imperfections

金属和合金的腐蚀 人造气氛中的腐蚀测试 产品鉴定加速腐蚀试验选择指南

Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification

水面舰艇导弹发射装置腐蚀防护设计和控制要求

Corrosion protection design and control requirements for surface warship missile launcher

电镀镉

Plating, Cadmium

镀镉

CADMIUM PLATING

电镀，锌镍合金

Plating, Zinc-Nickel Alloy

粉末涂料

Powder Coating Material

金属的防腐蚀处理 经冲洗和未经冲洗的铬酸转化涂层在铝合金上的应用

Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

金属工业管道 第6部分：埋地管道的附加要求

Metallic industrial piping - Part 6: Additional requirements for buried piping

工业装置和植物 Against 去除由攻击性介质引起的腐蚀的有机涂层系统和衬里 第1部分：术语、设计和底材准备

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate

铸铁管、配件和附件 铸铁管和配件有机内衬的要求和试验方法 第2部分：热塑性酸改性聚烯烃（TMPO）管内衬

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

工业阀门 执行机构 第4部分：工业阀门用液压部分回转执行机构 基本要求

Industrial valves — Actuators — Part 4: Hydraulic part-turn actuators for industrial valves — Basic requirements

航空系列 基于三价铬的化学转化涂层（用于铝及铝合金）

Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys

航空航天系列铝和铝合金的无六价铬阳极氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys

涂料和清漆 钢结构的防腐保护 第5部分：防护涂料系统（ISO 12944-5:2019）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)

涂料和清漆 钢结构的防腐保护 第8部分：新工作和维护用规范的发展（ISO 12944-8:2017）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)

在涂漆和相关产品应用前钢基材的制备 表面清洁度的目视评估 第3部分：焊接部位、边缘和其他存在表面缺陷区域的制备等级（ISO 8501-3:2024 IDT）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2024, IDT)

人工气氛中的腐蚀试验 盐雾试验（ISO 9227:2012）

Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2012)

海上运输工具美利体育官网首页网址照明的补充要求

UL Standard for Safety Supplemental Requirements for Luminaires for Installation on Marine Vessels

船舶用灯具安装补充要求安全标准

Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels

工业阀门 执行器 第3部分：用于工业阀门的气动部分回转执行器 基本要求

Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements

空间产品保证 腐蚀

Space product assurance - Corrosion (Endorsed by Asociación Espa?ola de Normalización in February of 2019.)

油漆和清漆 通过防护涂料系统对钢结构进行腐蚀防护 第5部分：防护涂料系统

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)

锌涂层 结构中钢铁防腐蚀指南和建议 第1部分：设计和耐腐蚀性的一般原则

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)

热喷涂 锌、铝及其合金 第2部分：腐蚀防护系统的执行

Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)

工业阀门 执行器 第4部分：用于工业阀门分转执行器的液压执行器 基本要求

Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements

在涂漆及相关产品应用前钢基材的制备 表面清洁度的目视评估 第3部分：焊接部位、边缘及其他存在表面缺陷区域的制备等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections

防止冷水和冷却回路损坏

Prevention of damage in cold and cooling water circuits

德国品牌保护协会指南：钢梯形梁屋顶消防安全

Fire Safety Measures for Steel Trapezoidal Profile Roofs