美利体育登录入口官网

不锈钢对晶间腐蚀敏感性的标准测试方法

Standard Method of Test for Sensitivity of Stainless Steel to Intergranular Attack

合金 UNS N08825 在不同轧机退火温度和时间后的抗敏化性能

Sensitization Resistance of Alloy UNS N08825 after different mill-annealing temperatures and times

镍基合金铸件在钾肥生产厂闸刀阀失效分析

Failure analysis of nickel-based alloy castings in knife valves of potash fertilizer production plants

AMPP Paper 17559-2022

UN S32202焊缝点蚀腐蚀性能：整体微观结构与表面行为

UN S32202 Weld Pitting Corrosion Performance: Overall Microstructure and Surface Behavior

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods for destructive testing of welds in metal - Corrosion test for welded austenitic stainless steel

奥氏体不锈钢晶间腐蚀敏感性美利体育登录入口官网的标准实施规程

Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

奥氏体不锈钢晶间腐蚀敏感性美利体育登录入口官网的标准规程

Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

高温中心站美利体育官网首页网址用无缝奥氏钢管标准规范

Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

美利体育登录入口官网严重敏化奥氏体不锈钢对晶间腐蚀敏感性

DETECTION OF SUSCEPTIBILITY TO INTERGRANULAR CORROSION IN SEVERELY SENSITIZED AUSTENITIC STAINLESS STEEL

美利体育登录入口官网铁素体不锈钢晶间腐蚀敏感性的标准实践规程

Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

铁素体不锈钢晶间腐蚀敏感性美利体育登录入口官网的标准实施规程

Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

船用或类似环境用高镁铝合金板标准规范

Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

船用或类似环境用高镁铝合金产品的标准规格

Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments

用于测量飞机化学过程引起的金属上的晶间侵袭或末端颗粒点蚀的标准实践

Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

测量飞机化学过程引起的金属颗粒间腐蚀或端部晶粒点蚀的标准实施规程

Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

煅制富镍铬轴承合金晶间腐蚀敏感性的探测用标准试验方法

Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

煅制高镍铬轴承合金晶间腐蚀敏感性的检查用标准试验方法

Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

煅制富镍铬轴承合金晶间腐蚀敏感性的探测用标准试验方法

Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

用于美利体育登录入口官网锻造 富镍 含铬合金中的晶间腐蚀敏感性的标准测试方法

Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏感性的标准试验方法 (NAMLT试验)

Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

确定5XXX系列铝合金在暴露于硝酸后质量损失的晶间腐蚀敏感性的标准试验方法（NAMLT试验）

Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

不锈钢合金的粒间腐蚀

Intergranular corrosion of stainless steel alloys

一般用途奥氏体不锈钢无缝和焊接钢管标准规范

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

焊点腐蚀的实践参考指南-成因和恢复

The Practical Reference Guide for Corrosion of Welds - Causes and Cures

冷锻紧固件和类似部件用钢丝规范 - 第2部分：不锈钢

Specification for Steel wire for cold forged fasteners and similar components — Part 2 : Stainless steel

包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件

Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions

包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件

Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions

金属和合金的腐蚀 固溶热处理铝合金抗晶间腐蚀性能的测定

Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys

金属和合金的腐蚀 评价可热处理铝合金晶间腐蚀敏感性的阳极试验

Corrosion of metals and alloys. Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys

耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱

Mechanical properties of corrosion-resistant stainless steel fasteners - Bolts, screws and studs

不锈钢耐晶间腐蚀的测定.奥氏体和铁素体－奥氏体(二相)不锈钢.测定不锈钢在硝酸介质中质量损失的腐蚀试验(休伊试验)

Determination of resistance to intergranular corrosion of stainless steels - Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

不锈钢耐晶间腐蚀的测定.第2部分:铁素体、奥氏体、铁素体－奥氏体(二相)不锈钢.含有硫酸的介质中的腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

镍基合金 耐晶间腐蚀性能的测定

Nickel - based alloys — Determination of resistance to intergranular corrosion

金属和合金腐蚀.奥体不锈钢晶粒间易受腐蚀性的加速腐蚀试验

Corrosion of metals and alloys - Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels

不锈钢抗晶间腐蚀的测定. 第3部分: 低铬铁素体不锈钢腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels. Corrosion test for low-Cr ferritic stainless steels

金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀草酸浸蚀试验方法

Corrosion of metals and alloys. Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel

船用不锈钢焊接接头晶间腐蚀试验方法

Method of intergranular corrosion test of welding joint of stainless steels for hull structure

金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀的草酸蚀刻试验方法

Corrosion of metals and alloys – Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel

屋顶的防水.无用屋顶的密封件.第3部分:设计、材料搬运和密封

Waterproofing of roofs - Sealings for non-utilized roofs - Part 3: Design, handling of materials, execution of sealings

金属腐蚀 腐蚀测试 第3部分：无机械应力的不均匀和局部腐蚀攻击的腐蚀值

Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses

腐蚀的金属 金属材料在管、罐和装置内部被水腐蚀时腐蚀几率评价

Corroded metals Evaluation of the corrosion probability of metal materials when they are corroded by water inside pipes, tanks and devices

有轨车辆用建造用不锈钢扁平制品

Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard

压力用不锈钢棒材

Stainless steel bars for pressure purposes; German version EN 10272:2016 / Note: Applies in conjunction with DIN EN 10021 (2007-03).

耐蚀钢铸件

Corrosion resistant steel castings

可运输的气瓶.容量不超过150升的可再充气焊接容器.第1部分:焊接奥氏体的试验方法证明设计的不锈钢气瓶

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods; English version of DIN EN 14638-1:2006-07

航空航天系列 试验方法 晶间腐蚀敏感性的测定 锻造铝合金产品AL-P2XXX-系列、AL-P7XXX-系列和铝锂合金（草案）

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys

航空航天系列 试验方法 晶间腐蚀敏感性的测定 锻造铝合金产品AL-P2XXX-系列、AL-P7XXX-系列和铝锂合金（草案）

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys

航空航天系列 试验方法 晶间腐蚀敏感性的测定 锻造铝合金产品AL-P2XXX-系列、AL-P7XXX-系列和铝锂合金

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys; German and English version EN 2716:2018

航空航天系列 铝和铝合金无六价铬阳极氧化（草案）

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys

金属和合金的腐蚀.可溶解热处理的铝合金抗颗粒间腐蚀的测定

Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995); German version EN ISO 11846:2008

金属和合金的腐蚀-固溶热处理铝合金抗晶间腐蚀的测定

Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995); German version EN ISO 11846:2008

金属和合金的腐蚀-双环方法（基于?ihal方法）的电化学动力学再激活测量

Corrosion of metals and alloys – Electrochemical potentiokinetic reactivation measurement using the double loop method (based on ?ihal’s method)

金属和合金的腐蚀.热处理铝合金的粒间腐蚀敏感性评价用阳极试验

Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006); German version EN ISO 15329:2008

金属和合金的腐蚀-评估可热处理铝合金晶间腐蚀敏感性的阳极试验

Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006); German version EN ISO 15329:2008

紧固件 耐腐蚀不锈钢紧固件的机械性能 第1部分：具有指定等级和性能等级的螺栓、螺钉和螺柱（草案）

Fasteners Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs with specified grades and property classes (draft)

不锈钢紧固件的机械性能 DIN i 第1部分：螺钉

Mechanical properties DIN of fasteners made of stainless steel i Part 1: Screws

耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱(ISO 3506-1-2009).德文版本EN ISO 3506-1-2009

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009

耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉和不受拉应力的类似紧固件

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

耐腐蚀不锈钢紧固件的机械特性.第4部分:自攻螺丝(ISO 3506-4-2009).德文版本EN ISO 3506-4-2009

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009

耐腐蚀不锈钢紧固件机械性能第4部分：自攻螺钉

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009

不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用质量损失测量法在硝酸介质中的进行腐蚀试验(晶间腐蚀试验)

Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German v

不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2:

镍基合金.抗晶间腐蚀性测定

Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990); German version EN ISO 9400:1995

不锈钢抗晶间腐蚀的测定 第3部分：低铬铁素体不锈钢腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 3: Corrosion test for low-Cr ferritic stainless steels

不锈钢抗晶间腐蚀的测定. 第3部分: 低铬铁素体不锈钢腐蚀试验(ISO 3651-3-2017)

Determination of resistance to intergranular corrosion of stainless steels - Part 3: Corrosion test for low-Cr ferritic stainless steels (ISO 3651-3:2017)

不锈钢耐晶间腐蚀性能测定 第3部分：低铬铁素体不锈钢腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels

外科植入物 金属材料 第9部分：锻造高氮不锈钢

Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel

外科植入物.金属材料.第9部分:锻造高氮不锈钢(ISO 5832-9-2007).英文版本DIN ISO 5832-9-2008

Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:2007); English version of DIN ISO 5832-9:2008-12

用于供水和燃气安装的不锈钢管及其试验

Stainless steel pipes for drinking water and gas installation requirements and tests

传送人类消耗的含水液体(包括水)的焊焊接不锈钢管.交货技术条件

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions

核电站用奥氏体不锈钢焊接钢管

Welded austenitic stainless steel tubes and pipes for nuclear power plant

船用铝合金板材

Wrought aluminium alloy sheets and plates for ships

尿素高压美利体育官网首页网址制造检验方法 第2部分：尿素级超低碳铬镍钼奥氏体不锈钢选择性腐蚀检查和金相检查

Fabrication and inspection method for high pressure urea equipment.Part 2:Selective corrosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade

航空用不锈钢无缝钢管规范

Specification for stainless steel seamless steel pipes for aviation use

航空用高温合金冷轧带材规范

Specification for cold-rolled strips of heat-resisting superalloy for aviation

抗氢钢棒规范

Specification for hydrogen-resistant steel bars

ЕСЗКС.铝和铝合金.晶间腐蚀快速试验法

Unified system of corrosion and ageing protection. Aluminium and aluminium alloys. Accelerated test methods for intercrystalline corrosion

压力用高合金钢制无缝管. 规格

Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications

容器和美利体育官网首页网址 奥氏体不锈钢直缝焊接钢管 技术条件

Vessels and apparatus. Technical specifications for welded austenitic stainless steel tubes

奥氏体不锈钢无缝和焊接钢管 技术条件

Seamless and welded austenitic stainless steel pipes. Technical specifications

手术用植入件.金属材料.第9部分:锻造高氮不锈钢

Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

不锈钢螺栓、螺钉和螺栓 机械性能

Bulones, tornillos y espárragos de acero inoxidable. Características mecánicas.

金属与合金的腐蚀 溶解热处理铝合金的耐晶间腐蚀性的测定

Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

金属和合金腐蚀.奥体不锈钢晶粒间易受腐蚀性的加速腐蚀试验

Corrosion of metals and alloys - Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels

耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs

不锈钢耐晶间腐蚀的测定.第1部分：奥氏体和铁素体-奥氏体（双相）不锈钢.通过测量质量损失进行硝酸介质腐蚀试验（Huey试验）

Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

不锈钢耐晶间腐蚀的测定 第1部分:奥氏体和铁素体奥氏体(二重)不锈钢 用失重测定法在硝酸介质中的腐蚀试验(Huey试验)

Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

不锈钢耐晶间腐蚀的测定第2部分：铁素体、奥氏体和铁素体-奥氏体（双相）不锈钢在含硫酸介质中的腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

不锈钢耐晶间腐蚀的测定 第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢 在含硫酸介质中的腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

不锈钢抗晶间腐蚀的测定. 第3部分: 低铬铁素体不锈钢腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 3: Corrosion test for low-Cr ferritic stainless steels

外科植入物.金属材料.第9部分:锻造高氮不锈钢

Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel

承压用扁钢制品.技术交付条件.第7部分:不锈钢

Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels

不锈钢用硫酸盐-硫酸的试验方法

Method of ferric sulfate-sulfuric acid test for stainless steel

不锈钢的硫酸-硫酸铜腐蚀试验方法

Method of copper sulfate-sulfuric acid test for stainless steels

扁平压力美利体育官网首页网址用钢制品 第7部分：不锈钢

Flat products made of steels for pressure purposes - Part 7: Stainless steels

自由冲压钢锻件通用技术条件 第4部分：不锈钢

Open die steel forgings for general engineering purposes - Part 4: Stainless steels

不锈钢在硝酸中的腐蚀行为及冷加工、敏化处理及其组合对腐蚀性能的影响

Corrosion behavior of stainless steel in nitric acid and the effects of cold working, sensitization treatment and their combination on corrosion performance

钢种304、304L、321、321L和347不锈钢在不同敏化和稳定热处理后的间粒腐蚀抵抗力研究

Study on the intergranular corrosion resistance of 304, 304L, 321, 321L and 347 stainless steel after different sensitization and stabilization heat treatments

合金UNS N08031 Plus及其卷焊包覆工艺

Alloy UNS N08031 Plus and its coil welding cladding process

石油天然气应用的轧制复合板的耐腐蚀性能

Corrosion Resistance of Roll-Bonded Clad Plates for Oil & Gas Applications

ASTM G28 测试的适用性

Applicability of ASTM G28 testing

生物质快速热解系统中不锈钢部件的腐蚀研究

Study on the corrosion of stainless steel components in biomass fast pyrolysis system

材料状态对压水堆主水中 600 合金前兆腐蚀损伤和应力腐蚀裂纹萌生行为的影响

Role of Material Condition in Precursor Corrosion Damage and Stress Corrosion Crack Initiation Behavior of Alloy 600 in PWR Primary Water

新型高间隙非磁性不锈钢用于油气应用

New high clearance non-magnetic stainless steel for oil and gas applications

6XXX铝合金在人工海水中电化学行为及粒间腐蚀性能

Electrochemical behavior and intergranular corrosion performance of 6XXX aluminum alloy in artificial seawater

非磁性钻杆用奥氏体不锈钢的替代敏感化试验方法

Substitution sensitization test method for austenitic stainless steel for non-magnetic drill pipe

压水堆核电厂用不锈钢.第7部分：S1、S2 级支承用奥氏体不锈钢钢板和钢带

Stainless steel for pressurized water reactor nuclear power plants.Part 7:Austenitic stainless steel plate and strip for Class S1 and S2 supports

承压美利体育官网首页网址用镍及镍合金无缝管

Nickel -nickel alloy seamless tube and pipe for pressure equipments

不锈钢过滤器的敏化作用和腐蚀

Sensitization and Corrosion in Stainless Steel Filters

铝合金，薄板 2.4Li 1.3Cu 0.95Mg 0.10Zr（8090-T6）固溶和沉淀热处理（未再结晶）

Aluminum Alloy, Sheet 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr (8090-T6) Solution and Precipitation Heat Treated (Unrecrystallized)

不锈钢焊接管 用于输送含水液体包括饮用水 技术交货条件

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions

航空航天系列试验方法晶间腐蚀敏感性的测定变形铝合金产品AL-P2XXX-系列、AL-P7XXX-系列和铝锂合金（瑞典标准）

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys (Swedish Standard)

金属和合金的腐蚀 基于Cihal方法的双回路法电化学动复活测量（ISO 12732:2006）

Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)

金属和合金的腐蚀 评估可热处理铝合金的晶间腐蚀倾向的阳极试验（ISO 15329:2006）

Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006)

不锈钢抗晶间腐蚀性能的测定 第1部分：奥氏体和铁素体 奥氏体（双相）不锈钢 通过测量质量损失在硝酸介质中进行腐蚀试验（Huey试验）（ISO 3651-1:1998）

Determination of reistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)

不锈钢抗晶间腐蚀性能的测定 第1部分：奥氏体和铁素体 奥氏体（双相）不锈钢 含硫酸介质中的腐蚀试验（ISO 3651-2:1998）

Determination of reistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in mediacontaining sulfuric acid (ISO 3651-2:1998)

镍基合金 耐整体腐蚀的测定（ISO 9400:1990）

Nickel-baserad alloys - Determination of resistance to integranular corrosion (ISO 9400:1990)

金属和合金的腐蚀 奥氏体型不锈钢晶间腐蚀倾向的加速腐蚀试验（ISO 21610:2009 等同）

Corrosion of metals and alloys - Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels (ISO 21610:2009, IDT)

低合金结构钢实验室腐蚀试验 第11部分：低合金结构钢晶间腐蚀试验方法

Laboratory Corrosion Tests on Low Alloy Structural Steels Part 11: Test Methods for Intergranular Corrosion of Low Alloy Structural Steels

低合金结构钢腐蚀试验 第11部分：晶间腐蚀试验方法

Corrosion test of low alloy structure steels -- Part 11: Test methods of intergranular corrosion

高速列车制动系统用精密不锈钢无缝管

Precision seamless tube of stainless steel for braking system of high speed train

核级仪表用精密不锈钢无缝钢管

Precision stainless steel seamless tube for instrumentation of nuclear class

金属和合金的腐蚀 用于评估可热处理铝合金的晶间腐蚀敏感性的阳极测试

Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006) (Endorsed by AENOR in June of 2008.)

不锈钢耐晶间腐蚀的测定 第2部分：铁素体、奥氏体和铁素体-奥氏体（双相）不锈钢 含硫酸介质的腐蚀试验（ISO 3651-2:1998）

DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS. PART 2: FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS. CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID (ISO 3651-2:1998)

镍基合金 耐晶间腐蚀的测定 （ISO 9400:1990）

NICKEL-BASED ALLOYS. DETRMINATION OF RESISTANCE TO INTERGRANULAR CORROSION. (ISO 9400:1990).

焊接 347 型不锈钢 解释报告

Welding Type 347 Stainless Steel - An Interpretive Report

给水加热器用奥氏体不锈钢U形无缝钢管

Austenitic stainless steel U-shaped seamless steel pipe for water heater