美利体育登录入口官网

钢铁五金件热浸镀锌涂层标准规范

Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

金属及相关涂层的试验方法 方法选择指南

Methods of test for metallic and related coatings - Method selection guide

金属及相关涂层的试验方法 局部厚度试验 横截面显微照相检验

Methods of test for metallic and related coatings - Local thickness tests - Micrographic examination of cross-sections

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Methods of test for metallic and related coatings - Local thickness tests - Beta-backscatter method

给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Site testing of protective coatings - Inspection report - Coating

钢铁制品锌-5%铝 (热镀锌) 涂层的标准规格

Standard Specification for Zinc-5&x2009;% Aluminum (Hot-Dip) Coatings on Iron and Steel Products

镀锌结构传导性研究案例的标准实施规程

Standard Practice for Conducting Case Studies on Galvanized Structures

对镀锌结构进行案例研究的标准实施规程

Standard Practice for Conducting Case Studies on Galvanized Structures

加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规格

Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

镍和铬镀层在铜及铜基合金上的电沉积

Electrodeposition of nickel and chromium coatings on copper and copper-based alloys

通过横截面显微镜检查测量金属和氧化物涂层厚度的标准测试方法

Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

用磁性法测量磁性基底金属非磁性镀层厚度的标准试验方法

Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

非金属底材上金属涂层厚度测定指南

Guide for Measurement of Thickness of Metallic Coatings on Nonmetallic Substrates

通过跌落试验测量电沉积金属镀层厚度的标准指南

Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

使用β射线反向散射法测量镀层厚度的标准试验方法

Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

扩散层厚度的的标准试验方法

Standard Test Methods for Thickness of Diffusion Coating

医院用上胶床单的标准规格

Standard Specification for Rubber-Coated Cloth Hospital Sheeting

钢筋网涂层厚度测定的标准试验方法

Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

织物增强物上涂层厚度测量的标准试验方法

Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

用磁场或涡流(电磁的)检验法测量覆层厚度的标准实施规程

Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods

户外用非居住、可移动储藏结构的标准规范

Standard Specification for Nonhabitable, Nonpermanent, Relocatable Storage Structures Primarily Designed for Outdoor Use (Lawn Buildings, Sheds, Gardensheds, Utility Buildings and Lockers)

钢制管道涂层膜厚度的无损测量用标准试验方法

Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel

B0487-测量涂层厚度的显微方法的实验室间比较

B0487-Interlaboratory Comparison of the Microscopical Method of Measuring Coating Thickness

D3450-内墙建筑涂料耐洗性能测试方法

D3450-Test Method for Washability Properties of Interior Architectural Coatings

焊透油漆底漆分类规范

Specification for classification of weld-through paint primers

金属紧固件的镀层.英制紧固件的要求

Coatings on metal fasteners - Requirements for imperial fasteners

金属紧固件涂层.采用机械法施加锌涂层规范

Coatings on metal fasteners - Specification for mechanically applied zinc and zinc based coatings

混凝土钢筋用钢 镀锌钢筋 第2部分：镀锌钢筋产品

Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products

混凝土结构的保护和修复用产品和方法.试验方法.增强保护用产品的触变性测定

Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement

混凝土路面 混凝土路面中使用的销钉粘结应力的测定

Concrete pavements - Determination of the bond stress of dowels to be used in concrete pavements

非金属基材上的金属镀层 镀层厚度的测量 微电阻率法

Metallic coatings on non - metallic basis materials — Measurement of coating thickness — Micro - resistivity method

搪瓷和瓷釉 过程工厂用搪玻璃美利体育官网首页网址 美利体育官网首页网址、部件、器具和附件的质量要求

Vitreous and porcelain enamels. Glass-lined apparatus for process plants - Quality requirements for apparatus, components, appliances and accessories

金属和其他非有机涂层 涂层厚度的测量 斐索多光束干涉法

Metallic and other non - organic coatings — Measurement of coating thicknesses — Fizeau multiple - beam interferometry method

铝和铝合金的阳极氧化 铝和铝合金上硬质阳极氧化涂层用规范

Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys

混凝土路面 第5部分：混凝土路面用销钉粘结应力的测定

Concrete pavements – Part 5: Determination of the bond stress of dowels to be used in concrete pavements

水工混凝土表面涂层质量美利体育登录入口官网技术规程

Technical specification for quality inspection of hydraulic concrete surface coating

塑料和复合材料涂层 第8部分：膜厚度

Coatings on plastics and composites - Part 8: Film thickness

聚丙烯涂层钢管道

Polypropylene coated steel pipe

微型系统生产美利体育官网首页网址 材料对光学和触觉尺寸测量的影响的测定 第2部分：触觉程序样本

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures

涂层厚度的测量 使用触针式仪器通过差值测量来测量涂层的厚度

Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument

涂层厚度的测量. 采用触针式仪器的差值测量对涂层厚度的测量

Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument

涂层厚度测定用超声测厚仪

Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)

岸上和海上管道用钢管和配件.外部液体用环氧和改良环氧覆层

Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002

陆上和海上管道用钢管和管件 外涂液聚氨酯和聚氨酯改性涂料

Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002

卷材涂层金属 测试方法 第1部分：膜厚度

Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2017

混凝土路面 第5部分：混凝土路面用销钉粘结应力的测定

Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in concrete pavements; German version EN 13863-5:2024

混凝土路面 第5部分：混凝土路面中使用的传力杆粘结应力的测定

Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in concrete pavements

航空航天系列.非金属材料.结构件胶粘剂.试验方法.底层涂料厚度的测定

Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998

航空航天系列-非金属材料

Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998

金属和其他无机涂层 多层镍沉积物中各层的同时厚度和电极电位测定（STEP 测试）（ISO 16866:2020）

Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020)

皮革 皮革的显微镜鉴定（草案）

Microscopic identification of leather (draft)

皮革-物理和机械测试-表面涂层厚度的测定

Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011); German version EN ISO 17186:2011

磁性基质上的非磁性镀层 镀层厚度的测量 磁性法（草案）

Magnetic method for measuring coating thickness of non-magnetic coatings on magnetic substrates (draft)

金属和非金属基材上的非磁性金属涂层 涂层厚度的测量 相敏涡流法（草案）

Measurement of coating thickness of non-magnetic metallic coatings on metallic and non-metallic substrates Phase-sensitive eddy current method (draft)

色漆和清漆 横切试验（草案）

Cross-cut test for paints and varnishes (draft)

精细陶瓷(高级陶瓷、高级工业陶瓷).用坑状磨削法测定涂层厚度(ISO 26423-2009).德文版本EN ISO 26423-2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009); German version EN ISO 26423:2016

金属和其它无机涂料.特定金属和无机涂料指南(ISO 27830-2008).德文版本EN ISO 27830-2013

Metallic and other inorganic coatings - Guidelines for specifying metallic and inorganic coatings (ISO 27830:2008); German version EN ISO 27830:2013

油漆和清漆 布赫霍尔茨压痕测试

Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German version EN ISO 2815:2003

金属和其他无机涂层 测量厚度的方法概览

Overview of methods for measuring thickness of metal and other inorganic coatings

钢结构腐蚀防护热喷涂(锌、铝及合金涂层)及其试验方法

Steel-work corrosion and protection-test methods for thermal spraying (Zinc、aluminium and their alloys)

无损美利体育登录入口官网方法（DVS 2303-4）

Nondestructive testing methods (DVS 2303-4)

混凝土结构保护和修补的产品和系统的试验方法.增强材料保护用产品的触变性测定

Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement

涂料耐磨性测定.落砂法

Determination for abrasion resistance of coatings by falling abrasive

金属覆盖层 厚度测量 扫描电镜法

Metallic coatings.Measurement of coating thickness.Scanning electron microscope method

光学功能薄膜 表面硬化薄膜 硬化层厚度测定方法

Optical functional films—Superficial hardening film—Determination of thickness of hardening coating

自行车、摩托车、小轮摩托车、机动脚踏两用车的金属和非金属无机镀层.一般要求和检验方法

Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motorbicycles. General requirements and methods of control

颜料.薄膜厚度的测定

Paint materials. Determination of film thickness

涂料材料 涂层厚度的测定

Coating materials. Determination of film thickness

统一的防腐蚀和防老化系统 金属和非金属无机涂料 控制方式

Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

无损美利体育登录入口官网. 覆盖测厚仪的参考测量. 通用原则

Nondestructiv testing. Reference mesures for calibration of thicrness gauges of inorganic coverings. General

金属和非金属无机特殊覆盖层 种类、厚度系列、标记

Metallic and non-metallic inorganic special coatings. Types, thickness ranges, designations

紧固产品 电解涂料

Fasteners. Electroplated coatings

飞机用紧固件涂铝通用规范

General specification for coated aluminum fasteners for aircraft use

皮革.服装用皮革（不包括毛皮）.规范和取样程序

Leather — Leather for apparel (excluding furs) — Specifications and sampling procedures

磁性基体上的非磁性覆盖层.覆盖层厚度的测量.磁性法

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method

色漆和清漆.漆膜厚度的测定

Paints and varnishes — Determination of film thickness

金属和非金属覆盖层厚度测量β背散射法

Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method

紧固件 电镀层

Fasteners - Electroplated coatings

金属涂层.涂层厚度的测量.扫描电子显微镜法

Metallic coatings — Measurement of coating thickness — Scanning electron microscope method

表面化学分析.电子光谱法.纳米颗粒涂层厚度和成分的测量

Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings

金刚石涂层硬质合金刀具 技术条件

Diamond coated cemented carbide cutting tools specifications

火焰喷钼涂层的检验方法

Test method for flame spraying coating of molybdenum

热喷涂用图形符号

Graphical symbol for thermal spraying

金属覆层的厚度试验方法

Methods of thickness test for metallic coatings

铝和铝合金阳极氧化涂层厚度的试验方法.第1部分:显微镜法

Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Microscopical method

铝和铝合金的阳极氧化.阳极氧化膜封孔质量的评估.第3部分:导纳测量法

Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxidation coatings .Part 3: Measurement of admittance

水泥混凝土路面 第5部分：用于水泥混凝土路面的钢筋销连接应力的测定

Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in concrete pavements

精细陶瓷（先进陶瓷、先进技术陶瓷） 划痕研磨法测定涂层厚度（ISO 26423:2009）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)

涂料和清漆 漆膜厚度的测定 (ISO 2808:2019)

Paints and varnishes - Determination of film thickness (ISO 2808:2019)

涂层检验员项目1级学生手册

Coating Inspector Program Level 1 Student Handbook

混凝土 路面 第5部分：混凝土 路面 用 销钉 粘结 应力 的 测定

Concrete pavements - Part 5 : determination of the bond stress of dowels to be used in concrete pavements

混凝土 路面 第5部分：混凝土 路面 用 销钉 粘结 应力 的 测定

Concrete pavements - Part 5 : determination of the bond stress of dowels to be used in concrete pavements

外部涂装系统 煤焦沥青环氧（2层）

External Coating Systems Data Sheet - Coal Tar Epoxy (2 Coats)

外部涂装系统数据表 醇酸 (3 涂层)

External Coating Systems Data Sheet Alkyd (3 Coats)

外部涂层系统数据表

External Coating Systems Data Sheet

汽车发动机 活塞环表面处理层 检验方法 第1部分：铬基陶瓷复合镀层

Automotive engines—Surface treatment layer of piston rings—Inspection method—Part 1: chromium based ceramic composite coating

电镀 锡铅（电沉积）

Plating@ Tin-Lead (Electrodeposited)

涂层 氮化钛物理气相沉积

Coating, Titanium Nitride Physical Vapor Deposition

紧固件涂层铝填充 陶瓷结合涂层

Coating of Fasteners Aluminum Filled@ Ceramic Bonded Coating

聚四氟乙烯（PTFE）树脂涂层 Low Build 370 to 400°C（698 to 752°F）Fusion

Polytetrafluoroethylene (PTFE) Resin Coating@ Low Build@ 370 to 400 °C (698 to 752 °F) Fusion

聚四氟乙烯（PTFE）树脂涂层 High Build 698 至 752°F（370 至 400°C）融合

Polytetrafluoroethylene (PTFE) Resin Coating High Build@ 698 to 752 °F (370 to 400 °C) Fusion.

混凝土人行道 第5部分：用于混凝土人行道的支承杆粘结应力的确定

Concrete pavements — Part 5: Determination of the bond stress of dowels to be used in concrete pavements

紧固件 深浸热镀锌涂层（ISO 10684:2004）

Fasteners - Hot dip galvanized coatings (ISO 10684:2004)

金属基非金属材料上的涂层 涂层厚度测量 微电阻率法（ISO 14571:2020）

Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Micro-resistivity method (ISO 14571:2020)

金属和氧化物涂层 涂层厚度的测量 显微方法（ISO 1463:2021）

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)

金属和其他无机涂层 厚度测量的定义和惯例（ISO 2064:1996）

Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)

磁性基材上的非磁性涂层 涂层厚度的测量 磁法（ISO 2178:2016）

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)

精细陶瓷（先进陶瓷、先进技术陶瓷） 碟痕磨削法测定涂层厚度（ISO 26423:2009）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)

金属涂层 涂层厚度的测量 轮廓法（ISO 4518:2021）

Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)

金属和其他无机涂层 多层镍沉积物中各层的同时厚度和电极电位测定（STEP 测试）（ISO 16866:2020）

Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020)

金属和非金属基材上的非磁性金属涂层 涂层厚度的测量 相敏涡流法

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)

油漆和清漆 膜厚度的测定

Paints and varnishes - Determination of film thickness (ISO 2808:2019)

搪瓷和搪瓷 应用于建筑用钢板的搪瓷涂层的特性（ISO 28722:2008）

Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)

混凝土路面 第5部分：混凝土路面用销钉粘结应力的测定

Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in concrete pavements