美利体育登录入口官网

铁和钢的分析方法 钛含量的测定（分光光度分析法）

Methods for the analysis of iron and steel - Determination of titanium content (spectrophotometric method)

钛和钛合金棒材和坯料的标准规范

Standard specification for titanium and titanium alloy rods and blanks

钛及钛合金铸件标准规范

Standard Specification for Titanium and Titanium Alloy Castings

电镀用钛和钛合金制备的标准实施规程

Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

电镀用钛及钛合金制备的标准实施规程

Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

钛和钛合金表面除垢和清洁标准指南

Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

钛及钛合金表面的去垢和清洗

Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

钛及钛合金无缝管标准规范

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

钛及钛合金无缝管标准规范

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

钛和钛合金焊接管的标准规范

Standard Specification for Titanium and Titanium Alloy Welded Pipe

导电和非导电基体上钛和钛合金电镀、钛和钛合金电沉积层的标准规范

Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

用原子吸收光谱法测定从整个油漆中回收的颜料中二氧化钛含量的标准试验方法

Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

采用惰性气体熔融技术测定钛和钛合金中氧和氮的标准试验方法

Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

用惰性气体熔化热导率法测定钛和钛合金中氢的标准试验方法

Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method

用二安替比林甲烷分光光度测定法测定镍合金中钛含量的标准试验方法

Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

用二安替比林甲烷分光光度法测定镍合金中钛的标准试验方法

Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

通过直流等离子体和电感耦合等离子体原子发射光谱分析钛和钛合金的标准测试方法（基于性能的测试方法）

Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

通过直流等离子体和电感耦合等离子体原子发射光谱分析钛和钛合金的标准测试方法（基于性能的测试方法）

Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

铌铁化学分析的标准试验方法

Standard Test Methods for Chemical Analysis of Ferroniobium

用钛的放射性活化测量快中子反应速度的标准试验方法

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

用二安替比林基甲烷紫外分光法测定铁矿石和相关材料中钛含量的标准试验方法

Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry

用二安替比林甲烷紫外分光光度测定法测定铁矿石中钛含量的标准试验方法

Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

外科植入物用金属注射成型非合金钛部件的标准规范

Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

E1938-二安替比林甲烷分光光度法测定镍合金中钛的试验方法

E1938-Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

E0350-碳钢、低合金钢、硅电工钢、锭铁和锻铁化学分析试验方法

E0350-Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

E2371-直流等离子体和电感耦合等离子体原子发射光谱法分析钛和钛合金的标准测试方法

E2371-Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry

钛、铌、锆和钽用于医用和外科应用

Titanium, niobium, zirconium and tantalum for medical and surgical applications

钛合金研讨会

Symposium on Titanium

钛的应力腐蚀开裂

STRESS-CORROSION CRACKING OF TITANIUM

工业应用中的钛和锆

Titanium and Zirconium in Industrial Applications

工业应用的钛和锆

Titanium and Zirconium for Industrial Applications

工业应用中的钛和锆：第四卷

Industrial Applications of Titanium and Zirconium: Fourth Volume

ASTM?B348/B348M-25

ASTM B348/B348M-25

融合焊接钛及其合金指南

A Guide to Fusion Welding of Titanium and Its Alloys

黑色金属材料的化学分析. 钢和铸铁中钛含量的测定. 火焰原子吸收光谱测定法

Chemical analysis of ferrous materials. Determination of titanium in steels and cast irons. Flame atomic absorption spectrometric method

未 firing 的压力容器 钛和钛合金制造的压力容器的额外要求

Unfired pressure vessels - Additional requirements for pressure vessels of titanium and titanium alloys

航空航天系列 钛及钛合金废料的回收利用

Aerospace series. Recycling of titanium and titanium alloy scrap

航空航天系列 钛TI-P99002 未经热处理 2级锻件坯料，用于退火锻件-a或D300mm

Aerospace series. Titanium TI-P99002. Not heat treated. Grade 2 forging stock, for annealed forgings - a or D 300 mm

航空航天系列 钛和钛合金 重熔坯料 技术规范

Aerospace series. Titanium and titanium alloys - Remelting stock. Technical specification

钢铁 钛含量的测定 二安替比林甲烷分光光度法

Steel and iron — Determination of titanium content — Diantipyrylmethane spectrophotometric method

钢和铁中钛含量的测定 二安替比林甲烷分光光度法

Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method

镍合金 钛含量的测定 二安替比林甲烷分子吸收光谱法

Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method

钛和钛合金.铁的测定.原子吸收光谱法

Titanium and titanium alloys - Determination of iron - Atomic absorption spectrometry

钛和钛合金.氧的测定.惰性气体熔解后的红外法

Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas

钛及钛合金 指定系统

Titanium and titanium alloys. Designation system

轻金属及其合金 钛及钛合金 词汇

Light metals and their alloys. Titanium and titanium alloys. Vocabulary

铁矿石.钛的测定.二安替比林基代甲烷分光光度法

Iron ores - Determination of titanium - Diantipyrylmethane spectrophotometric method

钛及钛合金 板材、片材和带材 交货技术条件

Titanium and titanium alloys. Plate, sheet and strip. Technical delivery conditions

未烧压力容器 第11部分：钛及钛合金压力容器的附加要求

Unfired pressure vessels – Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

钢和铁 钛含量的测定 茚三酮比色法

Steel and Iron – Determination of Titanium Content – Diantipyrylmethane Spectrophotometric Method

钛和可锻钛合金的铸件(自由锻造及模锻件).技术规范

Titanium and titanium wrought alloys forgings (hammer and drop forgings) - Technical specification

钛及钛合金锻件（锤锻件和模锻件）技术规范

Titanium and titanium wrought alloys forgings (hammer and drop forgings) - Technical specification

钢铁材料化学分析 钢铁中钛含量测定 火焰原子吸收光谱测定法（草案）

Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method

黑色金属材料化学分析 钢铁中钛的测定 火焰原子吸收光谱法

Chemical analysis of ferrous materials – Determination of titanium in steel and iron — Flame atomic absorption spectrometric method

钢铁材料化学分析.钢铁中钛含量测定.火焰原子吸收光谱测定法.德文版本EN 10211-2013

Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method; German version EN 10211:2013

锌及锌合金.化学分析.第10部分:锌合金中铬和钛的测定.分光光度法

Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method; German version EN 12441-10:2004

锌和锌合金化学分析第10部分：锌合金中铬和钛的测定分光光度法

Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method; German version EN 12441-10:2004

未 firing 的压力容器 第11部分：钛和钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

未 firing 的压力容器 第11部分：钛和钛合金压力容器的附加要求 德文版 EN 13445-11:2024

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys; German version EN 13445-11:2024

航空航天系列.钛和钛合金阳极氧化

Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997

航天系列 钛及钛合金废料的回收利用 德语和英语版本 EN 2955:2025

Aerospace series - Recycling of titanium and titanium alloy scrap; German and English version EN 2955:2025

航空航天系列 - 钛 TI-P99002 - 退火 - 铆钉线 - 1,6 mm D 10 mm

Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm D 10 mm; German and English version EN 3378:2019

航空航天系列-钛 TI-P99002-未热处理-退火锻件的 2 级锻坯-a 或 D 300 mm（草案）

Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock for annealed forgings - a or D 300 mm

航空航天系列-钛 TI-P99002-未热处理-退火锻件的 2 级锻坯-a 或 D 300 mm

Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock for annealed forgings - a or D 300 mm; German and English version EN 3451:2017

航空航天系列 钛合金 TI-P99002 未经热处理 2级锻造毛坯 用于退火锻件 a或D≤300mm

Aerospace series – Titanium TI-P99002 – Not heat treated Grade 2 forging stock for annealed forgings a or D 300 mm

航空航天系列 钛 TI-P99002 退火 机加工棒材 a 或 D 150 mm R 390 MPa（草案）

Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D 150 mm - R 390 MPa

航空航天系列 钛和钛合金 第007部分:重熔坯料 技术规范;德语和英语版本EN 4800-007:2025

Aerospace series - Titanium and titanium alloys - Part 007: Remelting stock - Technical specification; German and English version EN 4800-007:2025

钢和铁.钛含量测定.二安替比林基代甲烷分光光度法

Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:1991); German version EN ISO 10280:1995

焊接接头的无损美利体育登录入口官网射线照相美利体育登录入口官网的允许限制 第1部分：钢、镍、钛及其合金

Non-destructive testing of welded joints – Admissibility limits for radiographic testing – Part 1: Steel, nickel, titanium and their alloys

焊缝无损美利体育登录入口官网 - 射线照相美利体育登录入口官网的验收水平 - 第 1 部分：钢、镍、钛及其合金 (ISO 10675-1:2021)

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021); German version EN ISO 10675-1:2021

精细陶瓷（高级陶瓷、先进技术陶瓷） 高纯度钛酸钡粉末化学分析方法（ISO 21813:2019） 草案

Draft Document - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of high purity barium titanate powders (ISO 21813:2019); German and English version prEN ISO 21813:2022

精细陶瓷（草案）

Fine Ceramics (Draft)

航空航天 使用温度高达 232°C 和 10500kPa 的聚四氟乙烯(PTFE)软管组件 技术规格和要求

Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Technical specifications and requirements (ISO 10502:2012); Text in German and English

硬质合金.钛含量的测定.过氧化物光度法

Hardmetals; determination of titanium; photometric peroxide method; identical with ISO 4501:1978

四氟化铀中钛的分光光度法测定

Spectrophotometric Determination of Titanium in UF4

铁矿石化学分析方法　二安替吡啉甲烷光度法测定钛量

Method for chemical analysis of iron ore - Diantipyridine methane spectrophotometric method for determination of titanium content

稀土金属及其氧化物中非稀土杂质化学分析方法.钛量的测定

Chemical analysis methods for non-rare earth impurities in rare earth metals and their oxide.Determination of titanium in rare earth metals

锆及锆合金化学分析方法 第19部分：钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法

Methods for chemical analysis of zirconium and zirconium alloys—Part19：Determination of titanium content—Diantipyrylmethane spectrophotometry and the inductively coupled plasma atomic emission spectrometry

镁及镁合金化学分析方法 钛含量的测定 二安替比啉甲烷分光光度法

Chemical analysis methods of magnesium and magnesium alloys.Determination of titanium content.Diantipyrylmethane spectrophotometric method

六氟化铀中钛的测定 分光光度法

Spectrophotometric determination of titanium in uranium hexafluoride

锰矿石 钛含量的测定 二安替吡啉甲烷分光光度法

Manganese ores —— Determination of titanium content —— Diantipyrylmethane spectrophotometric method

稀土硅铁合金及镁硅铁合金化学分析方法.第5部分：钛量的测定.电感耦合等离子体发射光谱法

Chemical analysis methods of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy.Part 5: Determination of titanium content.Inductively coupled plasma atomic emission spectrometry

硬质合金化学分析方法.钼、钛和钒量的测定.火焰原子吸收光谱法

Methods for chemical analysis of hardmetals.Determination of molybdenum, titanium and vanadium contents.Flame atomic absorption spectrometric method

钢铁及合金.钛含量的测定.二安替比林甲烷分光光度法

Steel and iron.Determination of titanium content.Diantipyrylmethane spectrophotometric method

皮革和毛皮 金属含量的化学测定 第1部分：可萃取金属

Leather and fur—Chemical determination of metal content—Part 1:Extractable metals

皮革和毛皮 金属含量的化学测定 第2部分：金属总量

Leather and fur—Chemical determination of metal content—Part 2: Total metal content

钛及钛合金表面污染层美利体育登录入口官网方法

Detection method of contamination layer on the surface of titanium and titanium alloy

钛及钛合金产品力学性能试验取样方法

Sampling method for mechanical properties test of titanium and titanium alloy products

钛及钛合金挤压管

Extruded tube of titanium and titanium alloys

固体生物质燃料灰成分测定方法

Determination of ash composition in solid biofuels

烟气脱硝催化剂化学成分分析方法

Analytical method of chemical composition for flue gas DeNOx catalysts

激光成型用钛及钛合金粉

Titanium and titanium alloy powder for laser printer

电池锌饼

Zinc wafer for dry cell

钛及钛合金带、箔材

Titanium and titanium alloy strip, foil

钛及钛合金无缝管

Titanium and titanium alloy seamless pipe

铌铁 钛含量的测定 变色酸光度法和二安替比林甲烷光度法

Determination of ferroniobium titanium content by chromophoric acid photometry and diantipyrine methane photometry

钛及钛合金制件热处理

Heat treatment of titanium and titanium alloy parts

钨化学分析方法.第19部分：钛量的测定.二安替比林甲烷分光光度法

Methods for chemical analysis of tungsten.Part 19:Determination of titanium content.The diantipyrylmethane photometric spectrophtometry

钼化学分析方法 第17部分：钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法

Methods for chemical analysis of molybdenum.Part 17:Determination of titanium content.Diantipyrylmethane spectrophotometry and inductively coupled plasma atomic emission spectrometry

海绵钛、钛及钛合金化学分析方法 第22部分：铌量的测定 5-Br-PADAP分光光度法和电感耦合等离子体原子发射光谱法

Methods for chemical analysis of titanium sponge ,titanium and titanium alloys—Part 22：Determination of niobium content—5-Br-PADAP spectrophotometry and inductively coupled plasma atomic emission spectrometry

钛铁 钛含量的测定 硫酸铁铵滴定法

Ferrotitanium-Determination of titanium content-The ammonium ferric sulfate titration method

钛铁 钛含量的测定 二安替吡啉甲烷分光光度法

Ferrotitanium - Determination of titanium content - Diantipyrrolinemethane spectrophotometric method

铜及铜合金化学分析方法 第21部分：钛含量的测定

Methods of chemical analysis of copper and copper alloys - Part 21: Determination of titanium content

钛及钛合金高低倍组织检验方法

Microstructure and macrostructure examination for titanium and titanium alloys

钛及钛合金加工产品超声检验方法

Method of ultrasonic inspection for wrought titanium and titanium alloy products

钛及钛合金术语和金相图谱

Terminology and metallographs for titanium and titanium alloys

钛及钛合金术语和图谱

Titanium and Titanium Alloys: Terminology and Atlas

铁矿石 钛含量的测定 二安替吡啉甲烷分光光度法

Iron ores—Determination of titanium content—Diantipyrylmethane spectrophotometric method

铁矿石 铝、钙、镁、锰、磷、硅和钛含量的测定 电感耦合等离子体发射光谱法

Iron ore - Determination of aluminum, calcium, magnesium, manganese, phosphorus, silicon and titanium contents - Inductively coupled plasma optical emission spectrometry

铸造和变形加工铝合金.钛含量测定法

Aluminium casting and wrought alloys. Methods for determination of titanium

铝.钛含量测定法

Aluminium. Method for determination of titanium

矽铁.含钛量测定法

Ferrosilicon. Methods for determination of titanium

无锡青铜.钛含量测定法

Non-tin bronze. Methods for the determination of titanium

钛、镍合金.钛的测定法

Titanium-nickel alloy. Method for the determination of titanium

钛和钛合金.氧含量测定法

Titanium and titanium alloys. Methods of oxygen determination

原生镁.钛含量测定法

Primary magnesium. Methods for determination of titanium

镍基耐火,防腐精密合金.钛测定的方法

Nickel based fire-resistant, corrosion-resistant, precision alloys. Methods for titanium determination

钢铁.钛含量的测定. 二安替比林甲烷分光光度法

Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method

高温合金化学分析方法 第18部分：二安替比啉甲烷吸光光度法测定钛含量

Methods for chemical analysis of superalloys. Part 18: Determination of titanium content by diantipyryl methane photometric method

铝合金化学分析方法 第8部分:二安替比林甲烷光度法测定钛含量

Methods for chemical analysis of aluminium alloys-Part 8:Determination of titanium content by diantipyryl methane spectrophotometric method

水质 钼和钛的测定 石墨炉原子吸收分光光度法

Water quality-Determination of molybdenum and titanium by graphite furnace atomic absorption spectrophotometry

外科植入物 金属材料 未合金钛

Implants for surgery. Metallic materials. Unalloyed titanium.

钢和铁 钛含量的测定 二安替比林基代甲烷分光光度法

Steel and iron; determination of titanium content; diantipyrylmethane spectrophotometric method

钢和铁 钛含量的测定 二安替吡啉甲烷分光光度法

Steel and iron — Determination of titanium content — Diantipyrylmethane spectrophotometric method

镍合金化学分析方法二安替比林甲烷分子吸收法测定钛量

Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption method

钛和钛合金 铁的测定 用1, 10-邻二氮杂菲的分子吸收光谱测定法

Titanium and titanium alloys - Determination of iron - Molecular absorption spectrometry using 1, 10-phenanthroline

钛和钛合金.命名系统

Titanium and titanium alloys — Designation system

轻金属及其合金 钛和钛合金 词汇

Light metals and their alloys — Titanium and titanium alloys — Vocabulary

铁矿石.钛含量的测定.二氨替比林甲烷分光光度法

Iron ores - Determination of titanium - Diantipyrylmethane spectrophotometric method

铁钛合金 钛含量的测定 滴定法

Ferrotitanium — Determination of titanium content — Titrimetric method

眼镜架的焊接接头

Welded joints for spectacle frames

钢铁.原子吸收光谱测定法.第9部分:钛的测定.酸溶解后的火焰原子化法

Iron and steel -- Atomic absorption spectrometric method -- Part 9: Determination of titanium -- Flame atomization after decomposition with acids

硅铁合金的化学分析法.第6部分:钛含量的测定方法

Method for chemical analysis of ferrosilicon -- Part 6: Methods for determination of titanium content

钛化学分析通用规程

General Rule for Chemical Analysis of Titanium

钛及其合金中碳的测定方法

Methods for Determination of Carbon in Titanium and Titanium Alloys

钛和钛合金中氢含量的测定方法

Methods for Determination of Hydrogen in Titanium and Titanium Alloys

钛及钛合金中氧含量的测定方法

Methods for Determination of Oxygen in Titanium and Titanium Alloys

钛的原子发射光谱分析法

Method for atomic emission spectrometric analysis of titanium

锆及锆合金中钛的测定方法

Methods for determination of titanium in zirconium and zirconium alloys

钛和钛合金.线材和盘条

Titanium and titanium alloys -- Wires and wire rods

铁矿石.钛含量测定方法.第1部分:火焰原子吸收光谱法

Iron ores -- Determination of titanium -- Part 1: Flame atomic absorption spectrometric method

铁矿石.钛含量测定方法.第2部分:二安替比林基代甲烷分光光度法

Iron ores -- Determination of titanium -- Part 2: Diantipyrylmethane spectrophotometric method

铁合金化学分析 钢和铸铁中钛的测定 火焰原子吸收光谱法

Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method

非加热压力容器 第11部分：对钛和钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

航空航天系列 钛及钛合金废料回收

Aerospace series - Recycling of titanium and titanium alloy scrap

航空航天系列 钛及钛合金 试验方法 氢含量化学分析方法

Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content

航空航天系列 钛及钛合金 第7部分：重熔原料 技术规范

Aerospace series - Titanium and titanium alloys - Part 007: Remelting stock - Technical specification

航空航天系列 浮动式 receptacle, 双 lug

Aerospace series - Receptacle, floating, double lug

钢和铁 钛含量的测定 二苯基甲烷分光光度法 (ISO 10280:2025)

Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:2025)

邻近焊缝的无损美利体育登录入口官网：基于射线美利体育登录入口官网的验收等级 第1部分：钢、镍、钛及其合金（ISO 10675-1:2021）

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021)

不锈钢和钛在含溴溶液中的腐蚀

Corrosion of Stainless Steels and Titanium in Bromide-Containing Solutions

用于次氯酸钠服务的材料进展

Materials Advances for Sodium Hypochlorite Services

钛和钛合金 名称系统

Titanium and titanium alloys - Designation system

铁矿石 钛含量的测定 二安替比林甲烷分光光度计法

Iron ores. Determination of titanium content. Diantipyrylmethane spectrophotometric method.

未烧压力容器 第11部分:钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11 : additional requirements for pressure vessels of titanium and titanium alloys

未烧压力容器 第11部分:钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11 : additional requirements for pressure vessels of titanium and titanium alloys

航天系列 钛及钛合金废料的回收利用

Aerospace series - Recycling of titanium and titanium alloy scrap

航空航天系列 钛及钛合金 第007部分：重熔坯料 技术规格

Aerospace series - Titanium and titanium alloys - Part 007 : remelting stock - Technical specification

钢和铁 钛含量的测定 二安替比林甲烷分光光度法

Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method

Titane et alliages de titane - 命名系统

Titanium and titanium alloys - Designation system

航天系列 钛及钛合金 第007部分：重熔用坯料 技术规格

Aerospace series - Titanium and titanium alloys - Part 007 : remelting stock - Technical specification

航天系列 钛及钛合金废料的回收

Aerospace series - Recycling of titanium and titanium alloy scrap

钛材料的生产和存储规范

Standard for the Production, Processing, Handling, and Storage of Titanium

NSF 钛和二氧化钛 – 口腔风险评估文件

NSF Titanium and Titanium Dioxide – Oral Risk Assessment Document

水溶肥料 钴、钛含量测定

Determination of cobalt and titanium content in water-soluble fertilizer

铝 镁 和钛的识别标记

Identification Marking of Aluminum@ Magnesium@ and Titanium

退火钛板和钛带 70 000 psi 屈服

TITANIUM SHEET AND STRIP Annealed - 70@000 psi Yield

钛板、带和板材 工业纯 退火 70.0 ksi（485 MPa）

Titanium Sheet, Strip, and Plate, Commercially Pure, Annealed, 70.0 ksi (485 MPa)

工业纯钛棒、丝、锻件和环 屈服强度70 ksi（483 MPa）

Titanium Bars, Wire, Forgings, and Rings, Commercially Pure, 70 ksi (483 MPa) Yield Strength

工业用精对苯二甲酸中钛含量的测定 二安替吡啉甲烷分光光度法

Determination of titanium content in industrial purified terephthalic acid diantipyridine methane spectrophotometric method

出口硅铁中钛量的测定.二氨替比林甲烷分光光度法

Determination of titanium content in ferrosilicon for export.Diantipyrylmethane photometric method

烟花爆竹用烟火药剂 第5部分:钛含量的测定

Pyrotechnic composition used for fireworks and firecracker.Part 5:Determination of titanium content

铁材料的化学分析 钢和铸铁中的钛含量测定 火焰原子吸收光谱法

Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method

锌和锌合金 化学分析 第10部分：锌合金中铬和钛的测定 分光光度法

Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method

航空航天系列 钛及钛合金废料的回收利用

Aerospace series - Recycling of titanium and titanium alloy scrap

航空系列 钛合金 TI-P99002 未热处理 2级锻造毛坯 用于退火锻件 a或D ≤ 300 mm

Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm

航空航天系列钛和钛合金 第007部分：重熔坯料技术规范

Aerospace series - Titanium and titanium alloys - Part 007: Remelting stock - Technical specification

钢铁化学分析方法二安替比林甲烷分光光度法测定钛量

Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method

钢和铁 钛含量的测定 二安替吡啉甲烷光谱法（ISO 10280:2025 IDT）

Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method (ISO 10280:2025, IDT)

镍合金 钛含量的测定 二联吡啶甲烷分光光度法（ISO 11433:2020 等同采用）

Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption method (ISO 11433:2020, IDT)

铁矿石 钛的测定 对甲香基硫氰酸盐分光光度法（等同采用ISO 4691:2009）

Iron ores - Determination of titanium - Diantipyrylmethane spectrophotometric method (ISO 4691:2009, IDT)

土、草、粪便中钛含量的测定 二安替比林甲烷分光光度法

Determination of titanium content in soil, grass and feces diantipyrine methane spectrophotometric method

黑色金属材料化学分析钢和铸铁中钛的测定火焰原子吸收光谱法

Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method

硬金属 钛的测定 光度过氧化物法

HARDMETALS. DETERMINATION OF TITANIUM. PHOTOMETRIC PEROXIDE METHOD. (Endorsed by AENOR in January of 1994.)

航天系列 钛及钛合金废料的回收（由西班牙标准化协会于2025年4月批准 ）

Aerospace series - Recycling of titanium and titanium alloy scrap (Endorsed by Asociación Espa?ola de Normalización in April of 2025.)

航空航天系列 钛 TI-P99002 退火 机加工棒材 a 或 D = 150mm Rm = 390 MPa

Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D = 150 mm - Rm = 390 MPa

航天系列 钛及钛合金 第007部分：重熔材料 技术规范（由西班牙标准化协会于2025年4月认可）

Aerospace series - Titanium and titanium alloys - Part 007: Remelting stock - Technical specification (Endorsed by Asociación Espa?ola de Normalización in April of 2025.)

焊缝无损美利体育登录入口官网 射线照相美利体育登录入口官网的验收水平 第1部分：钢、镍、钛及其合金

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021)

未烧压力容器 第11部分：钛及钛合金压力容器的附加要求

Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys

航天系列 钛及钛合金废料的回收利用

Aerospace series - Recycling of titanium and titanium alloy scrap

航天系列 钛及钛合金 第007部分：可锻性重熔棒材 技术规范

Aerospace series - Titanium and titanium alloys - Part 007: Remelting stock - Technical specification

钢和铁 钛含量的测定 二安替吡啉甲烷分光光度法（ISO 10280:2025）

Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:2025)

焊缝无损美利体育登录入口官网 射线美利体育登录入口官网的验收水平 第1部分：钢、镍、钛及其合金

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys

高纯铝化学分析方法 第3部分:二安替吡啉甲烷-硫氰酸盐光度法测定钛含量

Chemical analysis methods of high purity aluminum.Part 3: Determination of titanium content by diantippylmethane-thiocyanate photometric method