固体矿物燃料在特定加热条件下的尺寸稳定性。特指材料在温度变化时保持性能不变的能力,是高温应用的关键参数。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| AMPP Paper 17588-2022 试验 |
Mitigation of scaling potential of organophosphate phosphonates in high temperature and high hardness carbonate formations
|
2022 材料保护与性能协会 |
| AMPP Paper 17745-2022 指南 |
A Guide to Thermal Stability of Reservoir Chemicals
热分解 |
2022 材料保护与性能协会 |
| ANSI C119.6-2011 试验标准 |
电气连接器标准.铝和铜导线用额定电压小于等于600 V的非密封多端k口连接系统 Standard for Electric Connectors - Non-Sealed, Multiport Connector Systems Rated 600 V or Less for Aluminum and Copper Conductors
|
2011 美国国家标准学会 |
| AQ 1057-2008 试验 |
The starter of chemical oxygen self-rescuer
|
2008-11-19 行业标准-安全生产 |
| AS 2300.4.7:1994 试验 |
乳制品行业化学和物理测试方法.奶粉和奶粉制品.脱脂奶粉中热稳定性的测定 Methods of chemical and physical testing for the dairying industry - Dried milk and dried milk products - Determination of the heat stability of skim milk powder
|
1994-09-16 澳大利亚标准协会 |
| AS/NZS 4158:2003(R2015) 规范标准 |
Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
涂层缺陷 |
2015 澳大利亚/新西兰标准 |
| ASTM C210-95(2007)e1 Test Method |
Standard Test Method for Reheat Change of Insulating Firebrick
|
1995 美国材料与试验协会 |
| ASTM D2070-24a 试验标准 |
Standard Test Method for Thermal Stability of Hydraulic Oils
液压油 |
2024-10-01 美国材料与试验协会 |
| ASTM D2115-10 Practice |
Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
变色 聚氯乙烯化合物 |
2010 美国材料与试验协会 |
| ASTM D2115-17 试验标准 |
Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
|
2017-09-01 美国材料与试验协会 |
| ASTM D4306-20 规范标准 |
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
|
2020 美国材料与试验协会 |
| ASTM D4802-16 Specification |
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
|
2016 美国材料与试验协会 |
| ASTM D5372-25 指南标准 |
Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
传热流体 |
2025-04-01 美国材料与试验协会 |
| ASTM D5579-16 Test Method |
用于评估循环耐久性试验中手动变速器润滑油热稳定性的标准试验方法 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
同步器 |
2016 美国材料与试验协会 |
| ASTM D5704-22 试验 |
手动变速器和终传动轴用润滑油的热稳定性和氧化稳定性评估的标准试验方法 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
氧化稳定性 |
2022-04-01 美国材料与试验协会 |
| ASTM D6203-06(2012) Test Method |
Standard Test Method for Thermal Stability of Way Lubricants
沉积物 |
2006 美国材料与试验协会 |
| ASTM D6743-11(2015) Test Method |
Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
分解产物 |
2011 美国材料与试验协会 |
| ASTM E1981-22 试验 |
Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
|
2022-06-01 美国材料与试验协会 |
| ASTM E2488-09(2014) Guide |
Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
工作空间 |
2009 美国材料与试验协会 |
| ASTM E2488-22 试验 |
Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
|
2022-11-15 美国材料与试验协会 |
| ASTM E2550-07 Test Method |
Standard Test Method for Thermal Stability by Thermogravimetry
分解温度 热重分析 |
2007 美国材料与试验协会 |
| ASTM E2550-11 Test Method |
Standard Test Method for Thermal Stability by Thermogravimetry
热重分析 |
2011 美国材料与试验协会 |
| ASTM E537-12 Test Method |
Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
|
2012 美国材料与试验协会 |
| ASTM E537-20 试验 |
Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
|
2020-02-01 美国材料与试验协会 |
| ASTM F1514-03(2013) Test Method |
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
弹性地板覆盖物 色差 |
2003 美国材料与试验协会 |
| ASTM F1514-19 试验 |
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
弹性地板 |
2019-11-01 美国材料与试验协会 |
| ASTM F1514-19(2025) 试验标准 |
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
弹性地板 颜色变化 |
2025-08-01 美国材料与试验协会 |
| ASTM MONO1-1991 试验 |
Thermal Oxidative Stability of Aviation Turbine Fuels
沉积物 热氧化稳定性 |
1991 美国材料与试验协会 |
| ASTM RR-D02-1339 1994 试验 |
D5579-在循环耐久性测试中评估手动变速箱润滑油热稳定性的标准测试方法 D5579-Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
|
1994 美国材料与试验协会 |
| ASTM RR-D02-1733 2011 试验方法标准 |
ASTM D02-1733 研究报告:建立有机热传导流体热稳定性测试方法重复性的内部实验室研究 Intralaboratory Study to Establish Repeatability Statement for ASTM D6743-11, Thermal Stability of Organic Heat Transfer Fluids
|
2011-12-01 美国材料与试验协会 |
| ASTM RR-D20-1262 2014 试验标准 |
D3575-Test Methods for Flexible Cellular Materials Made from Olefin Polymers
再现性 |
2014 美国材料与试验协会 |
| ASTM STP 110-1950 术语/符号/分类 |
建筑外墙中的水:问题和解决方案 历史 可重印 4-6 周内发货 Water in Exterior Building Walls: Problems and Solutions - Historical - available as reprint - ships in 4-6 weeks
|
1950 美国材料与试验协会 |
| BS 6730:1986 规范 |
地上铺设的冷饮水管道用公称规格63及其以下的黑色聚乙烯管材规范 Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
椭圆度 |
1986-11-28 英国标准学会 |
| BS EN 12877-2:2000 试验 |
塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.喷射模塑测定法 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by injection moulding
注射成型 着色材料 |
2000-01-15 英国标准学会 |
| BS EN 12877-3:2000 试验 |
塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.耐热试验测定法 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by oven test
着色材料 |
2000-01-15 英国标准学会 |
| BS EN 13630-2:2002(2003) 试验/规范 |
民用爆炸物.导爆索和保险引信.测定导爆索和保险引信的热稳定性 Explosives for civil uses - Detonating cords and safety fuses - Determination of thermal stability of detonating cords and safety fuses
导火索 |
2002-01-01 英国标准学会 |
| BS EN 13630-2:2025 试验标准 |
Explosives for civil uses. Detonating cords and safety fuses - Verification of thermal stability
安全引线 导爆索 |
2025-10-31 英国标准学会 |
| BS EN 13631-1:2005 规范 |
Explosives for civil uses - High explosives - Requirements
|
2005-06-30 英国标准学会 |
| BS EN 13631-2:2025 试验标准 |
Explosives for civil uses. Explosives for blasting, boosters and explosive substances - Verification of thermal stability
爆炸物 |
2025-10-31 英国标准学会 |
| BS EN 13763-2:2025 试验标准 |
民用爆炸物品 引爆器和引爆雷管继电器 引爆器、表面连接器、引爆雷管继电器和冲击管的热稳定性验证 Explosives for civil uses. Detonators and detonating cord relays - Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
导爆管 雷管 |
2025-10-31 英国标准学会 |
| BS EN ISO 10363:1995(1999) 试验 |
Hot - melt adhesives — Determination of thermal stability
热熔胶 |
1999-01-01 英国标准学会 |
| BS ISO 18936:2020 试验标准 |
Imaging materials. Processed colour photographs. Methods for measuring thermal stability
|
2020-08-31 英国标准学会 |
| DIN 3536:1994 规范 |
室内美利体育官网首页网址、煤气分配和煤气输送管道的煤气阀用润滑剂 Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
|
1994-01 德国标准化学会 |
| DIN 51522:1998 规范 |
Heat transfer fluids Q - Specifications, test
传热流体 |
1998-11 德国标准化学会 |
| DIN 51522:1998-11 规范 |
Heat transfer fluids Q - Specifications, test
传热介质 |
1998-11 德国标准化学会 |
| DIN 51528:1998 试验 |
Testing of mineral oils and related products - Determination of thermostability of unused heat transfer fluids
分解程度 |
1998-07 德国标准化学会 |
| DIN 53381-1:1983 试验 |
Testing of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods
诱导时间 |
1983-05 德国标准化学会 |
| DIN EN 13630-1:2004 规范 |
Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements; German version EN 13630-1:2003
安全导火索 导爆索 |
2004-03 德国标准化学会 |
| DIN EN 13630-1:2004-03 规范 |
Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements; German version EN 13630-1:2003 / Note: To be replaced by DIN EN 13630-1 (2021-05).
安全导火索 导火索 |
2004-03 德国标准化学会 |
| DIN EN 13630-2 E:2021-05 试验标准 |
民用爆炸物 引爆线和安全引信 第2部分:引爆线和安全引信热稳定性的测定(草案) Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses
安全引信 导爆索 |
2021-05 德国标准化学会 |
| DIN EN 13630-2:2002 试验 |
民用爆炸物.引爆线和安全引信.第2部分:引爆线和安全引信热稳定性的测定; 德文版本 EN 13630-2:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses; German version EN 13630-2:2002
安全导火索 导爆索 |
2002-12 德国标准化学会 |
| DIN EN 13630-2:2002-12 |
民用炸药 导爆索和安全引信 第2部分:导爆索和安全引信热稳定性的测定德文版 EN 13630-2:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses; German version EN 13630-2:2002 / Note: To be replaced by DIN EN 13630-2 (2021-05).
安全导火索 导火索 |
2002-12 德国标准化学会 |
| DIN EN 13631-1:2005 规范 |
Explosives for civil uses - High explosives - Part 1: Requirements; German version EN 13631-1:2005
摩擦感度 民用炸药 |
2005-07 德国标准化学会 |
| DIN EN 13631-1:2005-07 规范 |
Explosives for civil uses - High explosives - Part 1: Requirements; German version EN 13631-1:2005 / Note: To be replaced by DIN EN 13631-1 (2021-05).
摩擦感度 民用炸药 |
2005-07 德国标准化学会 |
| DIN EN 13631-2 E:2021-05 试验标准 |
民用爆炸物 高级炸药 第2部分:爆炸物热稳定性的测定(草案) Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives
推进剂 炸药 |
2021-05 德国标准化学会 |
| DIN EN 13631-2:2002 试验 |
民用爆炸物.高级炸药.第2部分:爆炸物热稳定性的测定; 德文版本 EN 13631-2:2002 Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives; German version EN 13631-2:2002
爆炸物 自加热 |
2002-12 德国标准化学会 |
| DIN EN 13631-2:2002-12 试验 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives; German version EN 13631-2:2002 / Note: To be replaced by DIN EN 13631-2 (2021-05).
爆炸物 自加热 |
2002-12 德国标准化学会 |
| DIN EN 13763-2:2002 试验 |
民用爆炸物.雷管和继电器.第2部分:热稳定性的测定; 德文版本 EN 13763-2:2002 Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability; German version EN 13763-2:2002
电雷管 非电雷管 |
2002-12 德国标准化学会 |
| DIN EN 13938-7:2004 试验 |
Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder; German version EN 13938-7:2004
摩擦感度 |
2004-11 德国标准化学会 |
| DIN EN 13938-7:2004-11 试验 |
Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder; German version EN 13938-7:2004 / Note: To be replaced by DIN EN 13938-7 (2021-05).
摩擦感度 |
2004-11 德国标准化学会 |
| DIN EN 3475-416:2007 试验 |
航空航天系列.飞行器用电缆.试验方法.第416部分:热稳定性 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability; German and English version EN 3475-416:2005
收缩 |
2007-04 德国标准化学会 |
| DIN EN 3475-416:2007-04 试验 |
航空航天系列-电缆、电气、飞机用-测试方法-第416部分:热稳定性 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability; German and English version EN 3475-416:2005 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
|
2007-04 德国标准化学会 |
| DIN EN 50363-3:2006 规范 |
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds; German version EN 50363-3:2005
|
2006-10 德国标准化学会 |
| DIN EN 60695-10-2:2004 试验 |
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test (IEC 60695-10-2:2003); German version EN 60695-10-2:2003
球压试验 |
2004-05 德国标准化学会 |
| DIN EN 61857-31:2017-09*VDE 0302-31:2017-09 试验 |
Electrical insulation systems –Procedures for thermal evaluation
寿命评估 |
2017-09-01 德国标准化学会 |
| DIN EN ISO 10363:1995 试验 |
热熔粘合剂.热稳定性测定 (ISO 10363:1992); 德文版本 EN ISO 10363:1995 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992); German version EN ISO 10363:1995
热熔胶 |
1995-11 德国标准化学会 |
| DIN EN ISO 15908:2003 试验 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
|
2003-03 德国标准化学会 |
| DIN EN ISO 17232:2009 试验 |
Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006); English version of DIN EN ISO 17232:2009-04
|
2009-04 德国标准化学会 |
| DIN EN ISO 182-2:2000 试验 |
塑料.基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定.第2部分:pH值法 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version
吸收液 |
2000-02 德国标准化学会 |
| DIN EN ISO 182-3:2001 试验 |
塑料.基于氯乙烯均聚物、共聚物的化合物和产品在高温下析出氯化氢和其它酸性产品的趋势测定.第3部分:电导测量法 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); Ger
|
2001-02 德国标准化学会 |
| DIN EN ISO 182-3:2001-02 试验 |
塑料 基于氯乙烯均聚物和共聚物的化合物和产品在高温下释放氯化氢和任何其他酸性产物的趋势的测定 第3部分:电导法 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); ...
|
2001-02 德国标准化学会 |
| DIN EN ISO 182-4:2001 试验 |
塑料.基于氯乙烯均聚物、共聚物的化合物和产品在高温下析出氯化氢和其它酸性产品的趋势测定.第4部分:电位测量法 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger
电位测定法 |
2001-02 德国标准化学会 |
| DIN EN ISO 305 E:2019-04 试验标准 |
塑料 聚氯乙烯、相关含氯均聚物和共聚物及其化合物的热稳定性测定 变色法(草案) Method for determination of thermal stability and discoloration of plastic polyvinyl chloride, related chlorine-containing homopolymers and copolymers and their compounds (draft)
变色 |
2019-04 德国标准化学会 |
| DIN EN ISO 305:1999 试验 |
塑料.聚氯乙烯和有关含氯的均聚物、共聚物及其混合物的热稳定性的测定.色变法 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999
变色 |
1999-10 德国标准化学会 |
| DIN EN ISO 305:2019-09 试验 |
塑料-聚氯乙烯、相关含氯均聚物和共聚物及其化合物热稳定性的测定-变色法 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:2019); German version EN ISO 305:2019
|
2019-09 德国标准化学会 |
| DIN EN ISO 4530 E:2022 |
玻璃和瓷釉制品 耐热性的测定 (ISO/DIS 4530:2021) 草案 Draft Document - Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat (ISO/DIS 4530:2021); German and English version prEN ISO 4530:2021
搪瓷制品 |
2022-02-01 德国标准化学会 |
| DIN EN ISO 4530 E:2022-02 试验 |
Determination of heat resistance of glass and enamel products (draft)
搪瓷制品 |
2022-02 德国标准化学会 |
| DVGW GW 335-A3:2003-06 试验 |
聚乙烯-Xa(PE-Xa)管材在气体和水分配系统中的要求与测试 第一部分 A3 Requirements and tests for polyethylene-Xa (PE-Xa) pipes in gas and water distribution systems Part 1 A3
|
2003-06 德国煤气与水工业协会 |
| DVGW W 542:2009-08 规范 |
Requirements and tests for multi-layer composite pipes in water supply installation
多层复合管 |
2009-08 德国煤气与水工业协会 |
| DVGW W 543-B1 A E:2010-08 规范 |
耐压柔性管路对于饮用水安装的要求与美利体育登录入口官网 补充附件1 Requirements and testing of pressure-resistant flexible pipes for drinking water installation Supplementary Annex 1
硅胶橡胶 |
2010-08 德国煤气与水工业协会 |
| DVGW W 543-B1:2012-03 规范 |
German Gas and Water Association (DVGW) Worksheet W 543-B1
硅胶橡胶 |
2012-03 德国煤气与水工业协会 |
| DVS 2204-5 BBL01:2003-12 规范 |
Adhesive performance test methods
|
2003-12 德国焊接协会 |
| EN ISO 15908:2002 试验 |
热塑塑料管道用胶粘剂.胶粘剂热稳定性的测试方法 ISO 15908-2002 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives ISO 15908: 2002
|
2002 欧洲标准化委员会 |
| GB/T 10701-2008 试验 |
Test methods for thermal stability of silica glass
石英玻璃 |
2008-06-30 国家市场监督管理总局 |
| GB/T 14633-2010 试验 |
Rare earth three-band phosphors for fluorescent lamps
|
2010-08-09 国家市场监督管理总局 |
| GB/T 14634.3-2010 试验 |
Test methods of rare earth three-band phosphors for fluorescent lamps.Part 3:Determination of thermostability
|
2010-08-09 国家市场监督管理总局 |
| GB/T 16998-1997 CF |
Hot-melt adhesives--Determination of thermal stability
热熔胶粘剂 |
1997-09-26 国家市场监督管理总局 |
| GB/T 1711-1989 CF |
Comparison of heat stability of pigments in stoving medium
|
1989-03-31 国家市场监督管理总局 |
| GB/T 17391-1998 CF |
Test method for thermal stability of polyethylene pipes and fittings
|
1998-05-19 国家市场监督管理总局 |
| GB/T 21280-2007 试验方法 |
Test method of thermal stability for dangerous products
危险货物 爆炸 |
2007-12-13 国家市场监督管理总局 |
| GB/T 22232.2-2026 试验 |
Thermal stability of chemical substances - Part 2: Adiabatic calorimetry
|
2026-04-30 国家市场监督管理总局 |
| GB/T 23800-2009 试验 |
Heat transfer fluids.Determination of thermal stability
有机热载体 |
2009-05-18 国家市场监督管理总局 |
| GB/T 2392-2014 试验 |
Dyes.Determination of thermo stability
反应染料 |
2014-07-08 国家市场监督管理总局 |
| GB/T 2917.1-2002 CF |
以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其它酸性产物的测定 刚果红法 Determination of compounds and products based on vingl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted temperatures--Congo red method
|
2002-05-29 国家市场监督管理总局 |
| GB/T 30454-2013 试验 |
Test methods of silicate phosphors activated by rare earths for LED
|
2013-12-31 国家市场监督管理总局 |
| GB/T 30455-2013 试验 |
Rare earth phosphate green phosphors for fluorescent lamps
|
2013-12-31 国家市场监督管理总局 |
| GB/T 31959-2015 试验标准 |
Determination of thermal oxidative resistance of carbon fiber
碳纤维 |
2015-09-11 国家市场监督管理总局 |
| GB/T 33617-2017 试验 |
Polyimide staple fiber
热重分析法 |
2017-05-12 国家市场监督管理总局 |
| GB/T 37946.2-2025 试验标准 |
Testing Methods for Organic Light Emitting Materials - Part 2: Thermal Properties
玻璃化转变温度 |
2025-08-01 国家市场监督管理总局 |
| GB/T 47119-2026 试验标准 |
Method for Determining Thermal Stability of Organic Heat Transfer Media - Internal Standard Gas Chromatography Method
有机热载体 |
2026-01-28 国家市场监督管理总局 |
| GB/T 9349-2002 CF |
聚氯乙烯、相关含氯均聚物和共聚物及其共混物热稳定性的测定 变色法 Determination of thermal stabitity of poly(vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds--Discoloration method
|
2002-05-29 国家市场监督管理总局 |
| GOST 17733-1989 试验 |
Glass containers. Method for determination of thermal resistance at raised temperatures
玻璃容器 |
1989 俄罗斯标准局 |
| GOST 22292-2021 试验标准 |
Silica transparent glass. Method for determination of stability to darkening after thermal treatment
|
2021-00-00 俄罗斯标准局 |
| GOST 23785.6-2001 试验 |
Cord fabric. Method for determination of thermal stability
断裂强力 |
2001 俄罗斯标准局 |
| GOST 25535-2013 试验 |
Glass and glass products. Heat resistance determination methods
玻璃制品 |
2013 俄罗斯标准局 |
| GOST 30323-1995 试验 |
Short circuit in electrical installations. Calculation methods of thermit and electrodynamic effects short circuit currents
短路 |
1995 俄罗斯标准局 |
| GOST 31695-2012 规范 |
Cosmetic gels. General specifications
|
2012 俄罗斯标准局 |
| GOST 5635-1980 规范 |
Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications
透镜 |
1998-06-01 俄罗斯标准局 |
| GOST 5717-1991 规范 |
Jars for canned food. Specifications
|
1997-05-01 俄罗斯标准局 |
| GOST 5742-2021 试验 |
Thermal insulation products from cellular concrete. Specifications
|
2022-01-11 俄罗斯标准局 |
| GOST R 52221-2004 试验 |
Nonwoven fabrics. Methods of determination of the heat resistance and the linear dimensions change after thermal treatment
线性尺寸变化 |
2004 俄罗斯标准局 |
| GOST R 52542-2006 试验 |
Refractories. Methods for determination of thermal resistance with cooling by compressed air
热循环 |
2006 俄罗斯标准局 |
| GOST R 52736-2007 试验 |
Short-circuits in electrical installations. Calculation methods of electrodynamics and thermal effects of short-circuit current
短路电流 |
2007 俄罗斯标准局 |
| GOST R 53313-2009 试验 |
Electrical mounting appliances. Requirements of fire safety. Test methods
|
2009 俄罗斯标准局 |
| GOST R 53319-2009 试验 |
Electric heating devices for household use. Fire safety requirements. Test methods
|
2009-1-1 俄罗斯标准局 |
| GOST R 55034-2012 试验 |
公共道路和高速公路. 加固沥青路面层的地工织物. 测定耐热性的试验方法 Public roads and highways. Geosynthetic for reinforcement of asphalt layers of road pavement. Test method for determination of heat resistance
|
2012 俄罗斯标准局 |
| GOST R 55188-2012 试验 |
Power transformers. Ability to withstand short circuit
短路 |
2012 俄罗斯标准局 |
| GOST R ISO 12219-9-2022 试验标准 |
来自车辆内部的空气 第9部分:使用大塑料袋测定车辆内部元件挥发性有机化合物排放量的方法 Interior air of road vehicles. Part 9. Determination of the emissions of volatile organic compounds from vehicle interior parts by using large bag method
|
2022-08-12 俄罗斯标准局 |
| HB 5350.2-2004 试验 |
熔模铸造模料性能试验方法 第2部分:热变形量和热稳定性的测定 Test method for properties of investment casting pattern materials-Part 2:Determination of thermal deformation and thermal stability
|
2004-09-01 行业标准-航空 |
| HG/T 2002-1991 |
Perchlorethylene resin for paint
|
1991-06-28 行业标准-化工 |
| HG/T 2167-1991 规范 |
PTFE resin
|
1991-11-18 行业标准-化工 |
| HG/T 3311-2009 试验 |
Determination of the thermal stability of poly(vinyl chloride)resins.Absorption of hydrogen chloride in water method
聚氯乙烯树脂 |
2009-12-04 行业标准-化工 |
| IEC 60512-5-1:2002 试验 |
电子美利体育官网首页网址连接器.试验和测量.第5-1部分:载流容量试验.试验5a:温升 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests; Test 5a: Temperature rise
温升 |
2002-02 国际电工委员会 |
| ISO 15908:2002 试验 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
|
2002-12 国际标准化组织 |
| ISO 305 试验标准 |
塑料.聚氯乙烯、相关含氯均聚物和共聚物及其化合物的热稳定性测定.变色法 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
变色 |
国际标准化组织 |
| ISO/TS 4667:2022 试验/规范 |
Coal — Determination of the thermal stability and thermal fragmentation
|
2022-08-12 国际标准化组织 |
| JC/T 654-2011 规范 |
Quartz glassware evaporating dish
应力双折射 |
2011-12-20 行业标准-建材 |
| JIS C 5402-5-1:2005 试验 |
电子美利体育官网首页网址连接器.试验和测量.第5-1部分:载流容量试验.试验5a:温升 Connectors for electronic equipment -- Tests and measurements -- Part 5-1: Current-carrying capacity tests -- Test 5a: Temperature rise
|
2005-03-20 日本工业标准调查会 |
| JIS K 2276:1989 试验标准 |
Testing Methods for Aviation Fuels
氧化稳定性 航空燃料 |
1991 日本工业标准调查会 |
| JIS K 2540:1989 试验标准 |
Testing method for thermal stability of lubricating oils
沉积物 |
1989-03-01 日本工业标准调查会 |
| LST EN 13558:2003 规范 |
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
淋浴底盘 |
2003-12-28 |
| LST EN 13630-2:2025 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Verification of thermal stability
安全引线 导爆索 |
2025-11-14 立陶宛标准局 |
| LST EN 13631-2:2025 |
用于民用目的的爆破药剂 乳化型爆破药剂、起爆器和爆炸性化学物质 第二部分:耐热性测试 Explosives for civil uses - Explosives for blasting, boosters and explosive substances - Part 2: Verification of thermal stability
爆炸物 |
2025-11-14 立陶宛标准局 |
| LST EN 13763-2:2025 |
言语用于民用目的 引爆器和导爆索延期器 第二部分:引爆器、表面连接器、导爆索延期器和导火管的耐热性测试 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
导爆管 雷管 |
2025-11-14 立陶宛标准局 |
| LST EN 3475-416:2006 试验 |
航空系列 电缆 电气用 飞机用 试验方法 第416部分:热稳定性 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability
|
2006-04-28 |
| LST EN 60831-1:2014 试验 |
1 kV 及以下额定电压交流电力系统恢复性并联电力电容器 第1部分:总则 运行特性、试验和额定参数 安全要求 安装和运行... Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60831-1:2014)
损耗角正切 |
2014-09-30 立陶宛标准局 |
| LST EN ISO 22975-3:2014 试验 |
太阳能 集热器部件与材料 第3部分:吸收体表面耐久性 (ISO 22975-3:2014) Solar energy - Collector components and materials - Part 3: Absorber surface durability (ISO 22975-3:2014)
耐腐蚀性 |
2014-11-17 立陶宛标准局 |
| LST EN ISO 305:2019 试验 |
塑料 聚氯乙烯、相关含氯均聚物和共聚物及其化合物的热稳定性测定 变色法 (ISO 305:2019) Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:2019)
变色 |
2019-08-30 立陶宛标准局 |
| MT/T 560-2008 规范 |
Classification for thermal stability value of coal
分级 |
2008-11-19 行业标准-煤炭 |
| NACE Paper 05636-2005 试验 |
Novel Corrosion Inhibitors for High Temperature Applications
腐蚀抑制剂 |
2005-01-01 美国防腐工程师协会 |
| NACE Paper 13182-2019 试验 |
Study on the anti-scaling performance of a new type of phosphonic acid anti-scalant in ultra-high temperature environment
磷酸酯 阻垢剂 |
2019 美国防腐工程师协会 |
| NB/SH/T 0859-2013 试验标准 |
Standard test method for the thermal stability of chemicals by thermal analysis
|
2013-06-08 行业标准-能源 |
| NEMA MS 14-2019 试验 |
Characterization of Radiofrequency (RF) Coil Heating in Magnetic Resonance Imaging Systems
|
2019-01-01 (美国)全国电气制造商协会 |
| NF C20-701*NF EN 60068-2-1:2007 试验 |
Environmental testing - Part 2-1 : tests - Tests A : cold.
低温试验 |
2007-08-01 法国标准化协会 |
| NF EN 13630-2:2025 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Verification of thermal stability
安全引线 导爆索 |
2025-10-01 法国标准化协会 |
| NF T70-630-2*NF EN 13630-2:2025 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2 : verification of thermal stability
安全引线 导爆索 |
2025-10-01 法国标准化协会 |
| PD ISO/TS 4667:2022 试验标准 |
Coal. Determination of the thermal stability and thermal fragmentation
|
2023-02-14 英国标准学会 |
| QB/T 2223-1996 试验 |
Test method for acrylic resin emulsion for tanning
化学稳定性 |
1996-06-05 行业标准-轻工 |
| QB/T 3593-1999 规范 |
Technical requirements on glass lamp shades for civil and construction use
残余应力 |
1999-1-1 行业标准-轻工 |
| SAE AIR6443-2019 信息报告 |
Impact of Copper Contamination on the Thermal Stability of Jet Fuels
|
2019-04-01 美国机动车工程师协会 |
| SAE AIR6443A-2025 指南标准 |
Impact of Copper Contamination on the Thermal Stability of Jet Fuels
喷气燃料 |
2025-05-27 美国机动车工程师协会 |
| SAE ARP6299-2020 试验标准 |
Procedure for Thermal Aging Test for Polyol Ester Gas Turbine Engine Lubricants
氧化稳定性 |
2020-09-01 美国机动车工程师协会 |
| SAE AS1701F-2022 规范标准 |
Lubricant, Solid Film
|
2022-04-01 美国机动车工程师协会 |
| SAE AS8660A-2020 规范 |
Silicone Compound, NATO Code Number S-736
|
2020-09-14 美国机动车工程师协会 |
| SAE J3042-2021 试验标准 |
Measuring Properties of Li-Battery Electrolyte
|
2021-01-01 美国机动车工程师协会 |
| SH/T 0317-1992 规范 |
Technical conditions for acceptance of porcelain vessels for petroleum product testing
|
1992 行业标准-石油化工 |
| SH/T 0677-1999 规范 |
Heat transfer fluids
|
1999-09-01 行业标准-石油化工 |
| SH/T 0680-1999 试验 |
Heat transfer fluids.Determination of thermal stability
|
1999-09-01 行业标准-石油化工 |
| SJ/T 11037-1996 试验 |
Test method for thermal stability of electronic glass
电子玻璃 |
1996-1-1 行业标准-电子 |
| SJ/T 11497-2015 试验 |
Test method for thermal stability testing of gallium arsenide wafers
退火 |
2015-04-30 行业标准-电子 |
| SN/T 2240-2008 试验标准 |
Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
危险品 |
2008-11-18 行业标准-出入境检验检疫 |
| SN/T 2902-2011 试验 |
Screening experiments for thermal stability and air stability of dangerous goods
危险品 |
2011-05-31 行业标准-出入境检验检疫 |
| SN/T 2942-2011 试验 |
Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry
氧化诱导时间 氧化诱导温度 |
2011-05-31 行业标准-出入境检验检疫 |
| SN/T 3078.1-2012 指南标准 |
Guide for assessing thermal stability of chemicals.Part 1:Methods of accelerating rate calorimetry
|
2012-05-07 行业标准-出入境检验检疫 |
| SS-EN 13630-2:2002 试验 |
民用爆炸物 导爆索和安全引信 第2部分:导爆索和安全引信热稳定性的测定 Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses
安全导火索 导火索 |
2002 瑞典标准研究所 |
| SS-EN 13631-1:2005 规范 |
Explosives for civil uses - High explosives - Part 1: Requirements
传爆 |
2005-08-08 瑞典标准研究所 |
| SS-EN 13631-2:2002 试验 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives
炸药 自热 |
2002 瑞典标准研究所 |
| SS-EN 13631-2:2025 |
民用爆炸物品 用于爆破、起爆药和爆炸物质 第2部分:热稳定性的验证 Explosives for civil uses — Explosives for blasting, boosters and explosive substances — Part 2: Verification of thermal stability
爆炸物 |
2025 瑞典标准研究所 |
| SS-EN 13763-2:2002 试验 |
Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability
雷管 |
2002 瑞典标准研究所 |
| SS-EN 13763-2:2025 |
民用爆破器材 引信和传爆线继电器 第2部分:引信、表面连接器、传爆线继电器和冲击管热稳定性的验证 Explosives for civil uses — Detonators and detonating cord relays — Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
导爆管 雷管 |
2025 瑞典标准研究所 |
| SS-EN 13938-7:2004 试验 |
民用爆炸物品 推进剂和火箭推进剂 第7部分:黑火药性质的测定 Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder
黑火药 |
2004 瑞典标准研究所 |
| SS-EN 3475-416:2005 试验 |
航空系列 电缆、电气美利体育官网首页网址、适用于飞机 试验方法 第416部分:热稳定性 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416:Thermal stability
|
2005 瑞典标准研究所 |
| SS-EN ISO 10363:1995 试验 |
Hot-melt adhesives - Determination of thermal stability (ISO 10 363:1992)
热熔胶 软化点 |
1995-11-24 瑞典标准研究所 |
| SS-EN ISO 15908:2002 试验标准 |
热塑性管道系统用粘合剂 粘合剂热稳定性测定的试验方法(ISO 15908:2002) Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002)
|
2002 瑞典标准研究所 |
| SS-EN ISO 305:2019 试验标准 |
聚乙烯氯及其相关含氯均聚物和共聚物及其化合物的热稳定性的测定 褪色法(ISO 305:2019) Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:2019)
|
2019 瑞典标准研究所 |
| UNE-EN 13630-2:2025 |
民用炸药 引爆索和安全导火线 第2部分:热稳定性验证 (经西班牙标准化协会于2026年1月批准 ) Explosives for civil uses - Detonating cords and safety fuses - Part 2: Verification of thermal stability (Endorsed by Asociación Espa?ola de Normalización in January of 2026.)
安全引线 导爆索 |
2026-01-01 西班牙标准化协会 |
| UNE-EN 13630-2:2026 |
民用炸药 引爆索和安全导火索 第2部分:热稳定性的验证(2026年1月由西班牙标准化协会批准) Explosives for civil uses - Detonating cords and safety fuses - Part 2: Verification of thermal stability (Endorsed by Asociación Espa?ola de Normalización in January 2026.)
安全引线 导爆索 |
2026-01-01 西班牙标准化协会 |
| UNE-EN 13631-1:2006 规范 |
Explosives for civil uses - High explosives - Part 1: Requirements
|
2006-01-04 西班牙标准化协会 |
| UNE-EN 13631-2:2003 试验 |
Explosives for civil uses. High explosives. Part 2: Determination of thermal stability of explosives.
自加热 |
2003-05-23 西班牙标准化协会 |
| UNE-EN 13631-2:2025 |
民用炸药 用于爆破、增效剂和炸药物质 第2部分:热稳定性验证 (经西班牙标准化协会于2026年1月确认 ) Explosives for civil uses - Explosives for blasting, boosters and explosive substances - Part 2: Verification of thermal stability (Endorsed by Asociación Espa?ola de Normalización in January of 2026.)
爆炸物 |
2026-01-01 西班牙标准化协会 |
| UNE-EN 13763-2:2003 试验 |
Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability
雷管 |
2003-04-30 西班牙标准化协会 |
| UNE-EN 13763-2:2025 |
民用炸药 导火索引爆器和导火索继电器 第2部分:引爆器、表面连接器、导火索继电器和冲击管热稳定性验证 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes (Endorsed by Asociación Espa?ola de Normalización in January of 2026...
导爆管 雷管 |
2026-01-01 西班牙标准化协会 |
| UNE-EN 13763-2:2026 |
民用炸药 引信和起爆雷管继电器 第2部分:引信、表面连接器、起爆雷管继电器和冲击管的热稳定性验证 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
导爆管 雷管 |
2026-01-01 西班牙标准化协会 |
| UNE-EN 3475-416:2005 试验 |
航空航天系列 电缆、电气、飞机使用 测试方法 第416部分:热稳定性 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability (Endorsed by AENOR in March of 2006.)
|
2006-03-01 西班牙标准化协会 |
| UNI EN 13630-2:2025 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Verification of thermal stability
安全引线 导爆索 |
2025-11-13 00:00:00 意大利统一标准化组织 |
| UNI EN 13631-2:2026 |
民用炸药 用于民用爆破作业的炸药、起爆药和一般爆炸物质 第2部分:热稳定性验证 Explosives for civil uses - Explosives for blasting, boosters and explosive substances - Part 2: Verification of thermal stability
爆炸物 |
2026-01-15 00:00:00 意大利统一标准化组织 |
| UNI EN 13763-2:2026 |
民用炸药 导爆管起爆器和延期装置 第2部分:导爆管起爆器、表面连接器、导爆管延期装置和冲击波管的热稳定性验证 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability of detonators, surface connectors, detonating cord relays and shock tubes
导爆管 雷管 |
2026-01-29 00:00:00 意大利统一标准化组织 |
| VDE 0115-526-1 E*DIN EN 50526-1:2009-06 试验 |
铁路应用 - 固定安装 - 直流过电压保护器和限压装置 第一部分:避雷器 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
|
2009-06-02 德国电气,电子和信息技术协会 |
| VDE 0207-363-3-2006 规范 |
Insulating@ sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds; German version EN 50363-3:2005
|
2006-10-01 德国电气,电子和信息技术协会 |
| VDE 0207-363-4-1-2006 规范 |
低压电缆绝缘、护套和覆盖材料 第4-1部分:PVC 护套化合物 Insulating@ sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds; German version EN 50363-4-1:2005
|
2006-10-01 德国电气,电子和信息技术协会 |
| VDI 3033-1995 指南标准 |
Heat-transfer systems with organic heat-transfer media - Operation, maintenance and repair
有机热载体 |
1995-07 德国机械工程师协会 |
| YBB 0002-2-2005 规范 |
Infusion bottles made of neutral borosilicate glass
耐水性 |
2006-02-21 行业标准-药品包装 |
| YY 0769-2009 试验 |
Dental phosphoric acid etching agent
|
2009-12-30 行业标准-医药 |
| 农业部2031号公告-17-2013 试验 |
转基因生物及其产品食用安全美利体育登录入口官网 蛋白质热稳定性试验 Food safety detection of genetically modified organisms and derived products.Protein heat stability test
蛋白质 |
2013-12-04 国家农业部 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-06-01 10:45