美利体育登录入口官网

金属材料 维氏硬度试验 试验方法

Metallic materials - Vickers hardness test - Test methods

采用超声波接触阻抗法进行便携式硬度试验的标准试验方法

Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

高级陶瓷的维氏压痕硬度的标准试验方法

Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

高级陶瓷维氏压痕硬度的标准试验方法

Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

金属的标准硬度换算表布氏硬度、维氏硬度、洛氏硬度、表面硬度、努氏硬度、硬度计硬度和里氏硬度之间的关系

Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

材料显微硬度的标准试验方法

Standard Test Method for Knoop and Vickers Hardness of Materials

材料的Knoop和Vickers硬度的标准试验方法

Standard Test Method for Knoop and Vickers Hardness of Materials

材料努氏和维氏硬度的标准试验方法

Standard Test Method for Knoop and Vickers Hardness of Materials

材料的努氏硬度和维氏硬度标准试验方法

Standard Test Method for Knoop and Vickers Hardness of Materials

金属材料维氏硬度和努氏硬度的标准试验方法

Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

E0140-金属标准硬度换算表布氏硬度、维氏硬度、洛氏硬度、表面硬度、努氏硬度、肖氏硬度、里氏硬度之间的关系

E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

维克尔斯硬度试验方法和维克尔斯硬度试验机校验方法

Vickers hardness test method and Vickers hardness test machine calibration method

牙科学.聚合物基模塑料

Dentistry - Polymer-based die materials

金属材料 维氏硬度测试 参考块的校准

Metallic materials. Vickers hardness test. Calibration of reference blocks

精细陶瓷（先进陶瓷、先进技术陶瓷） 压痕断裂（IF）法单片陶瓷室温断裂强度试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

精细陶瓷（高级陶瓷、先进技术陶瓷）室温单片陶瓷抗断裂性能试验方法（压痕断裂（IF）法）

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

硬质合金.巴氏韧性试验

Hardmetals - Palmqvist toughness test

精密陶瓷高温维克氏硬度试验法

Method of test for vickers hardness of fine ceramics at elevated temperatures

木工机械用锯片带

Band Saw Blades for Woodworking Machines

金属维氏硬度试验 测量结果不确定度评定

Uncertainty Evaluation of Measuring Result of Metal Vickers Hardness Test

DIN 267-24 快卸件 技术交货条件 第24部分：未指定验证载荷值的螺母硬度等级

DIN 267-24 Technical delivery conditions for quick-release fittings Part 24: Hardness grades for nuts without specified proof load values

紧固件.交货技术条件.第24部分:不带规定验证载荷值的螺母用硬度等级

Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values

紧固件 交货技术条件 第24部分：未指定验证载荷值的螺母硬度等级

Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values

金属材料 使用 UCI 方法进行硬度测试 第1部分：测试方法

Metallic materials - Hardness testing with the UCI method - Part 1: Test method

金属材料 使用 UCI 方法进行硬度测试 第1部分：测试方法

Metallic materials - Hardness testing with the UCI method - Part 1: Test method

涂装油漆和相关产品前钢基材的制备 金属喷砂清理磨料的试验方法 第3部分：硬度的测定（草案）

Preparation of steel substrates before application of paints and related products Test methods for abrasives for metal blast cleaning Part 3: Determination of hardness (draft)

使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第3部分:硬度测定

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997

涂装油漆和相关产品前钢基材的制备 金属喷砂清理磨料的试验方法 第3部分：硬度的测定（ISO 11125-3:2018）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018)

涂装油漆和相关产品前钢基材的制备 金属喷砂清理磨料的测试方法 第3部分：硬度的测定

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018); German version EN ISO 11125-3:2018

电阻焊接 电阻点焊、凸焊和缝焊的维氏硬度测试（低力和显微硬度）（ISO 14271:2017）

Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)

电阻焊 电阻点焊、凸焊和缝焊的维氏硬度测试（低力和显微硬度）

Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017

精细陶瓷(高级陶瓷, 高级工业陶瓷) 室温下单片陶瓷硬度的试验方法（草案）

Fine ceramics (advanced ceramics, advanced industrial ceramics) Test method for hardness of monolithic ceramics at room temperature (draft)

精细陶瓷(高级陶瓷, 高级工业陶瓷). 室温下单片陶瓷硬度的试验方法(ISO 14705-2016); G德文版本EN ISO 14705-2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016); German version EN ISO 14705:2021

精细陶瓷（先进陶瓷、先进技术陶瓷）-整体陶瓷室温硬度测试方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016); German version EN ISO 14705:2021

牙科镊子.第1部分:一般要求 (ISO 15098-1:1999); 德文版本 EN ISO 15098-1:2001

Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001

牙科. 旋转器械柄. 第3部分: 陶瓷柄(ISO 1797-3-2013); 德文版本EN ISO 1797-3-2013

Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013); German version EN ISO 1797-3:2013

金属材料焊缝的破坏性试验 激光和电子束焊接窄接头的硬度试验（维氏和努氏硬度试验）（ISO 22826:2005）

Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German and English version prEN ISO 22826:2020

钢.渗碳层和硬化层深度测定和检验

Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002); German version EN ISO 2639:2002

金属材料 维氏硬度测试 第1部分：测试方法（草案）

Vickers Hardness Testing of Metallic Materials Part 1: Test Method (Draft)

金属材料 维氏硬度测试 第 1 部分：测试方法

Metallic materials - Vickers hardness test - Part 1: Test method

金属材料-维氏硬度试验-第1部分：试验方法（ISO 6507-1:2018）

Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)

金属材料维氏硬度试验第1部分：试验方法

Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018); German version EN ISO 6507-1:2018 / Note: To be replaced by DIN EN ISO 6507-1 (2022-08).

金属材料-维氏硬度试验-第2部分：试验机的验证和校准

Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018); German version EN ISO 6507-2:2018

金属材料-维氏硬度测试-第3部分：参考块的校准

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018); German version EN ISO 6507-3:2018

金属材料 维氏硬度试验 第4部分：硬度值表（草案）

Vickers hardness test of metallic materials Part 4: Hardness value table (draft)

金属材料.维氏硬度试验.第4部分:硬度值表(ISO 6507-4-2005).德文版本EN ISO 6507-4:2005

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2005); English version of DIN EN ISO 6507-4:2006-03

金属材料.维氏硬度试验.第4部分:硬度值表(ISO 6507-4-2018); 德文版本EN ISO 6507-4-2018

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018

金属材料-维氏硬度测试-第4部分：硬度值表

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018

弹簧式直销 卷制 重型

Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007

金属材料焊接的破坏性试验 硬度试验 第2部分：焊接点的显微硬度测试（草案）

Destructive testing of welding of metallic materials Hardness testing Part 2: Microhardness testing of welded joints (draft)

钢.渗碳层和硬化层的深度的测定和检验 ISO 2639-2002

Steels Determination and verification of the depth of carburized and hardened cases ISO 2639: 2002

金属材料.硬度试验.第2部分:硬度计的检验

Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines

钢铁零件 渗氮层深度测定和金相组织检验

Determination of nitrided case depth and metallographic microstructure examination for steel & iron parts

内燃机.活塞环.第5部分:检验方法

Internal combustion engines.Piston rings.Part 5:Inspection measuring principles

精细陶瓷室温硬度试验方法

Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for hardness of monolithic ceramics at room temperature

涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定

Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 3:Determination of hardness

金属切割双金属带锯条 技术条件

Metal cutting-bimetal band saw blades.Technical specifications

屏蔽用锌白铜带箔材

Copper-nickel-zinc alloy strips and foils for shield

金属材料焊缝破坏性试验 焊接接头显微硬度试验

Destructive tests on welds in metallic materials—Microhardness testing of welded joints

外科器械 非切割铰接器械通用要求和试验方法

Surgical instruments—Non-cutting,articulated instruments—General requirements and test methods

铜及铜合金软化温度的测定方法

The measuring method for copper and copper alloys soften temperature

粉床电子束增材制造TC4合金材料

Additive manufacturing with TC4 alloys powder by bed electron beam melting

建筑装饰用铜及铜合金板带材

Copper and copper alloy sheet and strip for building decoration

溴化钾光学元件

Potassium bromide optical elements

金属材料 维氏硬度试验 第3部分：标准硬度块的标定

Vickers hardness test for metallic materials - Part 3: Calibration of standard hardness blocks

金属材料 维氏硬度试验 第4部分: 硬度值表

Metallic materials—Vickers hardness test—Part 4: Tables of hardness values

金属材料 巴氏硬度试验 第3部分：标准硬度块的标定

Barcol hardness test of metallic materials Part 3: Calibration of standard hardness blocks

平板显示器基板玻璃测试方法 第4部分：力学性能

Test methods for glass substrates for flat panel displays Part 4: Mechanical properties

硬质合金 维氏硬度试验方法

Hardmetals.Vickers hardness test

硬质合金 维氏硬度试验方法

Hardmetal - Vickers hardness test method

钢件渗碳淬火硬化层深度的测定和：

Steels-Determination and verification of the depth of carburized and hardened cases

金属材料焊缝的破坏性试验 激光和电子束焊接的窄接头的硬度测试（维氏和努氏硬度测试）

Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

国家测量一致性保证体系.金属和合金.维氏硬度试验.标准块的校准

State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block

自攻螺钉用平垫圈和垫圈组件. 普通大系列. A级产品

Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A

牙科用镊子.第1部分.一般要求

Dental tweezers. Part 1. General requirements

金属材料焊接的破坏试验. 激光和电子束焊成窄接头的硬度试验(维氏和努氏硬度试验)

Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness test)

金属和合金.威克斯硬度试验.第1部分:测试方法

Metals and alloys. Vickers hardness test. Part 1. Test method

国家测量统一性保证体系.金属和合金.威克斯硬度试验.第4部分:硬度值表

State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 4. Tables of hardness values

金属维氏硬度试验方法

Metal Vickers Hardness Test Method

热喷涂涂层硬度试验方法

Test method for hardness of thermal sprayed coatings

涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第3部分:硬度测定

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness

精细陶瓷(高级陶瓷, 高级工业陶瓷). 室温下单片陶瓷硬度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature

牙科镊子 第1部分:一般要求

Dental tweezers - Part 1: General requirements

精细陶瓷（先进陶瓷 先进技术陶瓷） - 通过压痕断裂（IF）法在室温下整体陶瓷的耐断裂性试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

牙科学. 牙挖器

Dentistry - Excavators

钢.渗碳层和硬化层深度的测定和检验

Steels - Determination and verification of the depth of carburized and hardened cases

硬质合金.巴氏韧性测试

Hardmetals - Palmqvist toughness test

硬质合金与粉煤灰；Palmqvist韧性试验

Hardmetals — Palmqvist toughness test

金属和其他无机覆盖层.维氏和努氏显微硬度检验

Metallic and other inorganic coatings - Vickers and Knoop microhardness tests

电阻焊接.电极和辅助美利体育官网首页网址用材料

Resistance welding - Materials for electrodes and ancillary equipment

金属材料.维氏硬度试验.第4部分:硬度值表格

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values

金属材料.维氏硬度试验.第4部分:硬度值表格

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values

银基复层电触头基本性能测量方法

Method for measuring basic properties of bimetal contacts

铆钉型触头用线材机械物理性能试验方法.第2部分:硬度测量

Methods for measuring mechanical and physical properies of wires for rivet contacts.Part 2:Determination of hardness

滑动轴承多层轴承减摩合金硬度检验方法

Plain bearings. Hardness test method for anti-friction alloy of multi-layer bearings

肖氏硬度试验.标准块的校准

Shore hardness test -- Calibration of reference blocks

精细陶瓷维氏硬度试验方法

Testing method for Vickers hardness of high performance ceramics

细陶瓷硬度的试验方法

Test methods for hardness of fine ceramics

高温下精细陶瓷维氏硬度的测试方法

Testing method for vickers hardness of fine ceramics at elevated temperatures

牙科.镊子.一般要求

Dentistry -- tweezers -- General requirements

牙科挖器

Dental excavators

牙科 -挖掘机

Dentistry -- Excavators

牙科起子.一般要求

Dentistry-elevators -- General requirements

维氏硬度试验 第1部分：试验方法

Vickers hardness test -- Part 1: Test method

高温下维氏硬度试验方法

Test methods for Vickers hardness at elevated temperatures

钢之脱碳层深度测定法

Methods of measuring decarburized depth for steel

涂装及与其相关产品前钢基制备 金属磨料喷砂测试方法 第3部分：硬度测定（ISO 11125-3:2018）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018)

金属材料 维氏硬度试验 第4部分：硬度值表（ISO 6507-4:2018）

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)

制表业 手表钢件的硬度

Watchmaking - Hardness of steel watch parts

汽车、摩托车钢质活塞环氮化(渗氮)层深度及硬度测定

Test method for depth and hardness of automobile and motorcycle steel piston ring nitride layer

硬度测试和硬度值转化

Hardness Tests and Hardness Number Conversions

涂装油漆和相关产品前钢材表面处理 金属喷砂清理磨料的试验方法 第3部分：硬度测定（ISO 11125-3:1993）

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993)

电阻焊 电阻点焊、投影焊和缝焊的维氏硬度试验（低载荷和微 hardness）（ISO 14271:2017）

Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)

普通陶瓷（高级陶瓷、高级技术陶瓷） 室温下单晶陶瓷硬度试验方法（ISO 14705:2016）

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)

硬质合金 沙姆昆硬度测试（ISO 28079:2009 等同采用）

Hardmetals - Palmqvist toughness test (ISO 28079:2009, IDT)

3D无氰硬金电铸首饰

3D cyanide-free hard gold electroforming jewelry

贵金属饰品硬度测试方法 显微维氏硬度法

Hardness test method of precious metal jewelry Vickers hardness test method

金属和其他无机涂层 维氏和努氏显微硬度测试（ISO 4516:2002）

Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests. (ISO 4516:2002)

金属材料-维氏硬度测试-第4部分：硬度值表

Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)

金属材料硬度试验

Hardness testing of metallic materials

金属材料硬度测试

Hardness testing of metallic materials

双孔铅志

Lead seal with double holes

灯引线支架用铜带

Copper strip for lamp frame

镍箔

Nickel coil

电容式变送器用铂铑合金毛细管

Platinrhodium alloy capillary for capacitance type transmitters

牙探针

Dental explorers

邮政日戳用铅字钉

Type for post date-stamp