美利体育登录入口官网

塑料管材和管件的试验方法方法 6：用于在压力下输送流体的热塑性塑料管材、管件和组件-耐内压

Methods of test for plastics pipes and fittings Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure-Resistance to internal pressure

恒定内压下塑料管失效时间的标准试验方法

Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

氯化聚氯乙烯塑料管（SDR–PR）标准规范

Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

家用热水和冷水以及建筑物供暖装置用热塑性塑料管道和配件系统 一般要求

Thermoplastics pipe and ?tting systems for hot and cold water for domestic purposes and heating installations in buildings - General requirements

塑料管道和管道系统 热塑性塑料管 拉伸性能的测定

Plastics piping and ducting systems — Thermoplastics pipes — Determination of tensile properties

塑料管道和管道系统 热塑性塑料管道和配件 维卡软化温度（VST）的测定

Plastics piping and ducting systems — Thermoplastics pipes and fittings — Determination of Vicat softening temperature (VST)

塑料管道和管道系统 热塑性塑料管 全天候法抗外部冲击试验方法

Plastics piping and ducting systems — Thermoplastics pipes — Test method for resistance to external blows by the round - the - clock method

塑料管道系统 - 热塑性塑料管道 - 恒温下耐内压的测定

Plastics piping systems — Thermoplasticspipes — Determination of resistance to internal pressure at constant temperature

流体传输用热塑管,配件和组件.抗内压力的测定.管道试件制备

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Preparation of pipe test pieces

流体输送用热塑性塑料管道 — 尺寸和公差 第1部分 公制系列《S*MT

Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances Part 1 . Metric series "S * MT

用于非压力应用的热塑性塑料管道系统 耐高温循环试验方法

Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling

热塑性管.纵向回缩.试验方法和参数

Thermoplastics pipes - Longitudinal reversion - Test methods and parameters

热塑性塑料管道 测定抵抗外部冲击的能力 全天候方法

Thermoplastics pipes. Determination of resistance to external blows. Round-the-clock method

塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的美利体育登录入口官网方法

Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999

塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994

Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994

热塑性塑料管材 纵向回复 测试方法和参数（草案）

Longitudinal recovery test methods and parameters for thermoplastic pipes (draft)

热塑性管.纵向回缩.试验方法和参数

Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005

热塑性塑料管材 纵向回复 测试方法和参数

Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005 / Note: To be replaced by DIN EN ISO 2505 (2021-07).

热塑性塑料管 耐外部冲击力的测定 全天候方法

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994); German version EN ISO 3127:2017

塑料.实验室光源暴露方法.第1部分:通用指南(ISO 4892-1-2016).德文版本EN ISO 4892-1-2016

Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016); German version EN ISO 4892-1:2016

热塑管道.拉伸性能的测定.第1部分:通用试验方法(ISO 6259-1:1997); 德文版本 EN ISO 6259-1:2001

Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001

热塑性塑料管.环压挺度的测定(ISO 9969-2016).德文版本EN ISO 9969-2016

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016

供水和加热系统用压力热塑性塑料管和其配件. 通用规格

Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications

液体输送用热塑性塑料管.尺寸和公差.第1部分:公制系列

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series

热塑性塑料管 万能壁厚工作台

Thermoplastic pipes. Universal wall thickness table

热塑性塑料管.拉伸特性的测定方法.第1部分:一般要求

Thermoplastics pipes. Method for determination of tensile properties. Part 3. General requirement

热塑性塑料管.拉伸特性的测定方法.第2部分:未增塑聚(氯乙烯),氯化聚(氯乙烯)与高冲击聚(氯乙烯)制管道

Thermoplastics pipes. Method for determination of tensile properties. Part 2. Pipes made of unplasticized poly(vinil chloride), chlorinated poly(vinil chloride) and high impact poly(vinil chloride)

用于流体输送的热塑性管材 摆锤法（Charpy）冲击阻力测定 第1部分：通用试验方法

Thermoplastics pipes for the transport of fluids. Determination of pendulum impact strength by the Charpy method. Part 1 - General test method.

塑料流体输送管 落锤冲击试验方法 第2部分：多材质管材的试验条件

Plastic pipes for fluid transport. Determination of pendulum impact resistance by Charpy method. Part 2 - Test conditions for pipes of various materials.

流体传输用热塑管、接头和组件.抗内压力的测定.第2部分:管试件的准备

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces

热塑性管.纵向回缩.试验方法和参数

Thermoplastics pipes - Longitudinal reversion - Test method and parameters

热塑性塑料管 通用管壁厚度表

Thermoplastic pipes - Universal wall thickness table

热塑性塑料管 耐液体化学药品 分类 第1部分:浸入试验的方法

Thermoplastics pipes - Resistance to liquid chemicals - Classification - Part 1: Immersion test method

热塑性塑料管 拉伸性能的测定 第1部分:通用试验方法

Thermoplastics pipes - Determination of tensile properties - Part 1: General test method

道路车辆 牵引车和挂车之间气压制动连接用蛇形管组件 第2部分:性能要求

Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements

热塑性管材 抗外部冲击性能的测定 阶梯法（ISO 11173:1994）

Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)

塑料管道 抗外部冲击测定 外周长法（ISO 3127:1994）

Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)

热塑性管材 拉伸性能的测定 第1部分：通用试验方法 (ISO 6259-1:2015)

Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)

塑料管材 伸长率比值的测定 (ISO 9967:2016)

Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)

塑料管道和管道系统 热塑性管道 拉伸性能的测定

Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties

热塑性管道 外部冲击阻力的测定 楼梯法（ISO 11173:1994）

Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)

热塑性塑料管、配件和组装件的液体输送性能测定 内部压力抵抗力确定 第2部分：管子试样制备（ISO 1167-2:2006）

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)

气动流体动力 热塑管用推入式连接器（ISO 14743:2004 IDT）

Pneumatic fluid power - Push-in connectors for thermoplastic tubes (ISO 14743:2004, IDT)

气动流体动力 用于热塑性管的推入式连接器（ISO 14743:2020 等同采用）

Pneumatic fluid power - Push-in connectors for thermoplastic tubes (ISO 14743:2020, IDT)

道路车辆 牵引车与被牵引车之间空气制动连接用盘管组件 第2部分：性能要求

Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements

塑料管道和导管系统 热塑性塑料管 全天候法耐外部冲击试验方法

Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method

流体输送用热塑性塑料管道、管件和组件 耐内压的测定 第2部分：管道试件的制备（ISO 1167-2:2006）

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)

热塑性塑料管 纵向回复 测试方法和参数（ISO 2505:2005）

Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)