美利体育登录入口官网

可燃气体供应用塑料管道系统 — 聚乙烯(PE) 第2部分：管道要求和试验

Plastic pipe systems for the supply of gaseous fuels — Polyethylene (PE) Part 2: Requirements and tests for pipes

煤矿用非金属瓦斯输送管材安全技术要求

Safety technical requirements of gas drainage pipes for coal mine

煤矿用非金属瓦斯输送管材安全技术要求

Safety technical requirements for non-metallic gas transportation pipes used in coal mines

塑料管道和配件的测试方法 方法 22：热塑性塑料管道 环刚度的测定（ISO 9969:2016 IDT）

Methods of test for plastics pipes and fittings, Method 22: Thermoplastics pipes — Determination of ring stiffness (ISO 9969:2016, IDT)

300毫米至1500毫米[12英寸至60英寸]的标准规范无压重力流雨水管和地下排水用环形波纹型壁聚乙烯（PE）管和配件

Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Ap

300毫米至1500毫米[12英寸至60英寸]环形波纹管壁聚乙烯（PE）管材及管件标准规范 用于非压力重力流雨水管和地下排水系统应用

Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications

陆地排水用50mm-1500mm[2in.-60in.]环形波纹型壁聚乙烯（PE）管和配件的标准规范

Standard Specification for 50?mm to 1500 mm [2 in. to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

玻璃纤维增强热塑性塑料管 确定在潮湿或干燥条件下环向分离特性

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions

无压力地下排水和排污塑料管道系统.聚乙烯(PE).第1部分:管、管件和系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system

气动加压排放管、排水管和下水道中使用的部件的一般要求

General requirements for components used in pneumatically pressurized discharge pipes , drains and sewers

无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.A型、有平滑内外表面的管和配件及系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Specifications for pipes and fittings with smooth interna

无压力地下排水和污水用塑料管道系统.含矿物调节剂的聚丙烯(PP-MD).管、配件和系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipes, fittings and the system

塑料管道系统 玻璃增强热固性塑料(GRP)管道 暴露于化学环境后相对弯曲蠕变系数的测定

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment

玻璃增强热固性塑料（GRP）管 湿或干条件下环蠕变性能的测定

Glass - reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions

热塑性塑料管件.环刚度的测定

Thermoplastics fittings - Determination of ring stiffness

塑料管路和管道系统.热塑管.环挠性测定

Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility

玻璃增强热固性塑料 (GRP) 管道 初始环刚度的测定

Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness

埋地聚乙烯排水管管道工程技术规程

Technical specification for buried PE pipeline of sewer engineering

埋地排水用钢带增强聚乙烯螺旋波纹管管道工程技术规程

Technical specification for buried spirally wound corrugated polyethylene with ribbed steel reinforced pipes of sewerage engineering

聚乙烯塑钢缠绕排水管管道工程技术规程

Technical specification for steel-reinforced spirally wound polyethylene of drainage pipeline engineering

高密度聚乙烯缠绕结构壁管材

Spirally enwound structure-wall pipes of high density polyethylene (HDPE)

给水用孔网钢带聚乙烯复合管

Polyethylene(PE) composite pipes with porous steel strip for water supply

埋地排水用钢带增强聚乙烯（PE）螺旋波纹管

Metal reinforced polyethylene(PE) spiral corrugated pipe for underground sewer

排水用硬聚氯乙烯(PVC-U)玻璃微珠复合管材

Unplasticized polyvinyl chloride (PVC-U) and glass microsphere composite pipes for drainage

埋地双平壁钢塑复合缠绕排水管

Spirally wound steelreinforced polyethylene pipes with double plain wall for underground sewer

玻璃纤维增强热固性塑料 (GRP) 管 湿润或干燥条件下环蠕变性能的测定 (ISO 10468:2023)

Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)

再生硬聚氯乙烯（PVC-U）无压埋地排污、排水用管材

Regenerated rigid polyvinyl chloride (PVC-U) non-pressure buried sewage and drainage pipes

纤维增强改性聚氯乙烯结构壁复合管通用技术条件

General technical specifications for fiber reinforced modified polyvinyl chloride structural wall composite pipes

连续缠绕铺放玻璃纤维增强塑料电缆导管技术规范

Technical specifications for continuous winding and laying of glass fiber reinforced plastic cable ducts

玻璃纤维增强式不饱和聚酯树脂(UP-GF)管材 第2部分：缠绕式和填充式 一般质量要求、检验

Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled, general quality requirements, testing

玻璃纤维增强不饱和聚酯树脂（UP-GF）管道第2部分：缠绕、填充、一般质量要求、测试

Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled, general quality requirements, testing

离心浇注玻璃纤维增强聚脂树脂管(UP-GF).第2部分:一般质量要求、检验

Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing

离心铸造填充玻璃纤维增强不饱和聚酯树脂（UP-GF）管道 第2部分：一般质量要求、测试

Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing

具有异形壁和内部光滑管的热塑性材料制成的管道和配件 地下安装用 DN 1200 以上的大型管道 第1部分：一般要求和性能特征

Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 1: General requirements and performance characteristics / Note: Applies in conjunction with DIN ...

具有异形壁和内部光滑管的热塑性材料制成的管道和配件 地下安装用 DN 1200 以上的大型管道 第2部分：管道和配件规范

Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings

具有异形壁和内部光滑管的热塑性材料制成的管道和配件 地下安装用 DN 1200 以上的大型管道 第2部分：管道和配件规范

Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings / Note: Applies in conjunction with DIN 16917-1 (2015-10).

异型外壁和光滑管内壁热塑性材料管和配件 第1部分：分类与尺寸规格

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions

异型外壁和光滑管内壁热塑性材料管和配件 第1部分：分类与尺寸规格

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions

异型外壁和光滑管内壁热塑性材料管和配件.第1部分:尺寸规格

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Dimensions

异型外壁和光滑管内壁热塑性材料管和配件. 第1部分: 分类与尺寸规格

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions

具有异形壁和内光滑管的热塑性塑料管材和管件 第1部分：分类和尺寸

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions

具有异形壁和内部光滑管的热塑性塑料管道和配件 第2部分：技术交付规范

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications

具有异形壁和内部光滑管的热塑性塑料管道和配件 第2部分：技术交付规范

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications

异型外壁和光滑管内壁热塑性材料管和配件. 第2部分: 技术交付规范

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications

塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南.德文版本CEN/TS 14807-2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2013

无压力地下排水系统和排水美利体育官网首页网址所用塑料管道系统 聚乙烯 (PE) 第1部分：管道,美利体育官网首页网址和系统的规范（草案）

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system

非压力地下排水和污水处理用塑料管道系统 聚乙烯（PE） 第1部分：管道、配件和系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005+A1:2011

聚乙烯（PE）塑料管道系统 第2部分：管子

Polyethylene (PE) plastic piping systems Part 2: Pipes

建筑物外部排水和下水道系统翻新和修理构件一般要求

General requirements for components used for renovation and repair of drain and sewer systems outside buildings; German version EN 13380:2001

无压地下排水和污水用塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)的结构壁管系统.第1部分:一般要求和性能特征

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characterist

无压地下排水和污水塑料管系统 未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统 第3部分:B型、有平滑内外表面的管和配件及系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth

用于非压力地下排水和污水处理的塑料管道系统 未增塑聚乙烯

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1401-1:2019 / Note: To be amended by DIN EN 1401-1/A1...

建筑物结构体中的废水和污物排放系统用塑料管道系统(低温和高温).聚丙烯(PP).第1部分:管、管接头和管道系统的要求

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998

塑料管道系统用于供水 未增塑聚氯乙烯（PVC-U） 第6部分：敷设建议

Plastics piping systems for water supply - Unplasticized polyvinyl chloride (PVC-U) - Part 6: Recommendations for laying

用于土壤和废物排放的塑料管道系统

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999 / Note: DIN ...

地下无压力排水和排污用塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管,管件和系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2012

用于非压力地下排水和污水处理的塑料管道系统 含有矿物改性剂的聚丙烯

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2012 / Note: To be replaced by DIN EN 14758...

塑料管道和管道系统 检查室和检修孔用热塑性塑料轴或立管 环刚度的测定

Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness; German version EN 14982:2006+A1:2010 / Note: To be replaced by DIN EN ISO 13268 (2022-09).

塑料管系统 建筑结构内污物和废弃物排放系统 管道、配件及其连接件用性能特点（草案）

Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints

塑料管系统 建筑结构内污物和废弃物排放系统 管道、配件及其连接件用性能特点（草案）

Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints

塑料管系统.建筑结构内污物和废弃物排放系统.管道、配件及其连接件用性能特点

Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints; English version of DIN EN 15012:2008-02

塑料管道系统 无压排水和污水管件埋地管道 管道和配件的要求及测试/评估方法

Plastic piping systems - Non-pressure drainage and sewer fittings - Buried piping - Requirements and test/evaluation methods for pipes and fittings

塑料管材 无压排水埋地用管道部件

Plastics piping systems - Non-pressure drainage and sewerage piping components buried in ground Requirements and test/assessment methods for pipes and fittings

塑料管道系统用于给水有压或无压 玻璃纤维增强热固性塑料（GRP）基于聚酯树脂（UP） 第1部分：一般

Plastics piping systems for water supply, pressure or non-pressure; Glass-reinforced thermosetting plastics (GRP) based on polyester resins (UP); Part 1: General

塑料管系统用于供水 有或无压力 玻璃纤维增强热固性塑料 (GRP) 基于聚酯树脂 (UP) 第6部分：安装推荐实践

Plastics pipe systems for water supply with or without pressure Glass-reinforced thermosetting plastics (GRP) based on polyester resins (UP) Part 6: Recommended practice for installation

非压力地下排水和污水处理用塑料管道系统 聚丙烯 (PP) 第1部分：管道、配件和系统规范（包括修正案 A1:2002）

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP) — Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002)

地下排水和排污水用塑料管道系统.聚丙烯(PP).第1部分:管道,配件和系统规范,英文版本DIN EN 1852-1:2009-07

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; English version of DIN EN 1852-1:2009-07

玻璃纤维增强热固性塑料 (GRP) 制成的管道 DIN 在化学环境中储存后弯曲时的相对蠕变系数的测定

Pipes made of glass fiber reinforced thermoset plastics (GRP) DIN Determination of the relative creep factor when bent after storage in a chemical environment

玻璃增强热固性塑料 (GRP) 管道 潮湿或干燥条件下环蠕变性能的测定 (ISO 10468:2023)

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)

玻璃增强热固性塑料（GRP）管道 潮湿或干燥条件下环蠕变性能的测定（ISO 10468:2023）；德文版 EN ISO 10468:2023

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023); German version EN ISO 10468:2023

用于带压地下排水和污水网络改造的塑料管道系统 第4部分：现场固化管道内衬

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018); German version EN ISO 11297-4:2018

热塑性塑料配件.环形刚度的测定

Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009

热塑性塑料配件 环刚度的测定

Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009

热塑性塑料管 环压挺度的测定（草案）

Determination of compression stiffness of thermoplastic pipe rings (draft)

热塑性塑料管.环压挺度的测定

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007); English version of DIN EN ISO 9969:2008-03

热塑性塑料管.环压挺度的测定(ISO 9969-2016).德文版本EN ISO 9969-2016

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016

供水,压力排水和排污用玻璃纤维增强聚乙烯(PE-GF)制塑料管道系统.第1部分:总论

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General

电力电缆用导管第2部分：玻璃纤维增强塑料电缆导管

Technical requirements for electric cable conduits.Part 2:Cable conduits of fiberglass reinforced plastics

电力电缆导管技术条件 第7部分：非开挖用塑料电缆导管

Technical requirements for power cable conduits - Part 7: Plastic cable conduits of trenchless use

无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U),聚丙烯(PP )和聚乙烯(PE)结构壁管系统.第1部分:一般要求和性能特征

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U)@ polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristi

建筑物结构体中的废水和污物排放系统用塑料管道系统(低温和高温).聚丙烯(PP).第1部分:管,管接头和管道系统的要求

Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polypropylene (PP) - Part 1: Specifications for Pipes, Fittings and the System

土工用聚烯烃渗排水网状管

Polyolefin infiltration drainage mesh pipe for civil engineering application

竹缠绕管廊

Bamboo-wrapped utility tunnel

支撑纤维素的热塑性管道 在潮湿或干燥条件下设置环状隔离特性

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions

无压力地下排水和排污用热塑性塑料管道.检查室和检修孔用热塑性塑料轴或升口.环钢度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness

无压地下排水和排污用热塑性管道系统.检查室和人孔用热塑塑料竖井或立管.环刚度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness

热塑性塑料管件.环刚度的测定

Thermoplastics fittings - Determination of ring stiffness

塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 干燥条件下蠕变系数的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions

塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 初始有效环刚度的测定

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness

玻璃钢热固性塑料（GRP）管 初始环刚度的测定

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness

玻璃纤维增强热固性塑料（GRP）管 初始环刚度的测定

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness

热塑管. 环刚度的测定

Thermoplastics pipes - Determination of ring stiffness

供水用塑料管道系统.未增塑聚氯乙烯(PVC-U)和定向PVC-U (PVC-O).安装导则

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) - Guidance for installation

塑料管道系统 地下热塑性管道系统的构造设计 适用于各种荷载的程序与说明

Plastic piping systems - Structural design of buried thermoplastics piping systems - Procedure and guidance under various conditions of loading

热固性玻璃纤维增强塑料（GRP）管道 干态或湿态下环刚度特性的测定（ISO 10468:2022）

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)

竹缠绕管廊

Bamboo winding pipe gallery

塑料管道系统用聚乙烯（PE）管材

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes

玻璃增强热固性塑料（GRP）管 潮湿或干燥条件下环形蠕变性能的测定

Glass-reinforced thermosetting plastic (GRP) tubes - Determination of annular creep properties under wet or dry conditions

塑料管道系统.玻璃纤维增强式热固性管件.蠕变系数干燥条件的测定

Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.

塑料管道系统 - 埋地热塑性塑料管道系统的结构设计 - 各种荷载条件下的程序和指南

Plastic piping systems — Structural design of buried thermoplastics piping systems — Procedure and guidance under various conditions of loading

塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

硬聚氯乙烯(PVC-U)双壁波纹管材

Unplasticized polyvinyl chloride (PVC-U) double wall corrugated pipes

埋地用纤维增强聚丙烯(FRPP)加筋管材

Fibre reinforced polypropylene(FRPP) ultra-rip pipes for underground usage

钢筋螺旋缠绕PE排水管和污水管道

Steel-reinforced spirally wound PE drainage and sewer pipes

塑料管材 环刚度试验 恒挠度速度法

Plastics pipes - Ring stiffness testing - Method with constant deflection speed

塑料管道系统 检查室和人孔用热塑性竖井或立管 环刚度的测定

Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness

玻璃纤维增强热固性塑料（GRP）管在湿或干条件下环向蠕变性能的测定（ISO 10468:2023）

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)

热塑性管件 环刚度的测定（ISO 13967:2009）

Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)

热塑性管材 环刚度的测定（ISO 9969:1994）

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:1994)

热塑性管材 环刚度的测定（ISO 9969:2016）

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)

非压力地下排水和污水用热塑性管道系统 热塑性竖井或立管用于检查井和人孔 圈刚度的测定（ISO 13268:2010 等同采用）

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2010, IDT)

埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材

Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage

电力电缆保护用GHFB方型双壁波纹管

GHFB square double-wall corrugated pipe for power cable protection

埋地排水用HDPP双层钢带热熔复合管

HDPP double-layer steel strip hot-melt composite pipe for buried drainage

连续纤维增强聚乙烯复合管

Polyethylene composite pipe reinforced by continuous fiber

中空壁塑钢缠绕聚乙烯管道

Sprially wound steel-reinforced polyethylene pipes with hollow wall

埋地用高筋(PP)增强聚乙烯缠绕管

Tall arched polypropylene (PP) rib reinforced polyethylene winding pipes for underground usage

埋地排水排污用聚氯乙烯合金双壁波纹管材

Polyvinyl chloride alloy double-wall corrugated pipes for buried drainage and sewage

聚乙烯（改性无水磷石膏）双层钢塑管

Polyethylene (modified anhydrous phosphogypsum) double steel plastic pipe

HDPP双层钢带热熔复合排水管

HDPP double layer steel hot melt composite drainage pipe

电力、通讯用改性聚氯乙烯（MCMP ）方形双壁波纹管

Modified polyvinyl chloride (MCMP) square double-wall corrugated pipe for electric power and communication

纳米改性高密度聚乙烯（MUHDPE）合金排水管

Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe

立筋式中空壁钢塑复合缠绕管

Vertical rib type hollow wall steel-plastic composite winding pipe

埋地排水用 改性聚氯乙烯（PVMK）双壁波纹管材

Modified Polyvinyl Chloride（PVMK）Double Wall corrugated pipe for underground drainage

非开挖用改性聚丙烯(MPP)电缆护套管

Modified polypropylene cable sheaths for Trenchless use

山东省复合材料行业团体标准--纤维增强塑料夹砂管道

Group standard for composite material industry in Shandong Province--Fiber reinforced plastic sand-included pipes

地下通信管道用芯层发泡硬聚氯乙烯(PVC-U)管材

Unplasticized polyvinyl chloride(PVC-U）pipes with a cellular core for underground usage

埋地电力电缆用高密度聚乙烯（HDPE） 塑料套管

High density polyethylene (HDPE) plastic pipes for buried power cables

非开挖施工用离心浇铸玻璃纤维增强塑料夹砂管

Centrifugal casting glass fiber reinforced plastic pipe used for trenchless construction

埋地排水排污用聚丙烯（PP）缠绕结构壁管材

Polypropylene (PP) spirally enwound structural-wall pipes for underground drainage and sewerage

建筑结构内用于土壤和废物排放（低温和高温）的塑料管道系统 丙烯腈-丁二烯-苯乙烯(ABS)第1部分：管道、配件和系统的要求

PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM

热塑性塑料配件 环刚度的测定（ISO 13967:2009）

Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)

热塑性塑料管 环刚度的测定

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)

玻璃纤维增强热固性塑料（GRP）管材 湿润或干燥条件下环蠕变性能的测定

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions

地下通信管道用塑料管 第3部分：双壁波纹管

Plastic pipes for underground communication pipes Part 3: Double-walled corrugated pipes