美利体育登录入口官网

维卡软化温度的标准测试方法

Standard Test Method for Vicat Softening Temperature of Plastics

塑料维卡软化温度的标准试验方法

Standard Test Method for Vicat Softening Temperature of Plastics

D1525-塑料维卡软化温度的测试方法

D1525-Test Method for Vicat Softening Temperature of Plastics

塑料管道和管道系统 热塑性塑料管道和配件 维卡软化温度（VST）的测定

Plastics piping and ducting systems — Thermoplastics pipes and fittings — Determination of Vicat softening temperature (VST)

塑料 未增塑的聚氯乙烯片材 类型、尺寸和特性 厚度小于 1 毫米的板材

Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics - Sheets of thickness less than 1 mm

塑料.聚苯乙烯(PS)模塑和挤塑材料.命名体系和基本规范

Plastics. Polystyrene (PS) moulding and extrusion materials. Designation system and basis for specifications

塑料.苯乙烯/丙烯腈(SAN)的模塑和挤塑材料.名称与符号系统和规范基础

Plastics. Styrene/acrylonitrile (SAN) moulding and extrusion materials. Designation system and basis for specifications

塑料 聚苯乙烯（PS）模塑和挤出材料 命名系统和规格基础

Plastics. Polystyrene (PS) moulding and extrusion materials - Designation system and basis for specifications

热塑性塑料管材和管件 - 维卡软化温度 第1部分：通用测试方法

Thermoplastics pipes and fittings – Vicat softening temperature Part 1 : General test method

热塑性塑料管材和管件 维卡软化温度 聚氯乙烯基（PVC-U、PVC-C、PVC-HI）和丙烯腈基（ABS、ASA）管材和管件的一般测试方法和测试条件

Thermoplastics pipes and fittings. Vicat softening temperature. General test method and test conditions for vinyl chloride-based (PVC-U, PVC-C, PVC-HI) and acrylonitrile-based (ABS, ASA) pipes and fittings fittings

塑料.耐冲击的聚苯乙烯(PS-I)的模塑和挤塑材料.名称和符号体系和规范基础

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Designation system and basis for specifications

塑料 热塑性材料 维卡软化温度（VST）的测定

Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)

塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.名称与符号系统和规范基础

Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Designation system and basis for specifications

塑料.聚碳酸酯模塑和挤塑材料.命名系统和规范基础

Plastics - Poly(methyl methacrylate)(PMMA) moulding and extrusion materials - Designation system and basis for specifications

塑料 热塑性材料 维卡软化温度（VST）的测定

Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)

氯化聚氯乙烯(PVC-C)管.一般质量要求和检验

Chlorinated polyvinyl chloride (PVC-C) pipes - General quality requirements, testing

氯化聚氯乙烯(PVC-C)管材 一般质量要求、测试

Chlorinated polyvinyl chloride (PVC-C) pipes - General quality requirements, testing

塑料 建筑物用未增塑聚氯乙烯(PVC-U)型材 第1部分：PVC-U型材的命名

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles

塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994

Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994

塑料.未增塑聚氯乙烯(PVC-U)模塑与挤出材料.第1部分:命名系统与基本规范

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995); German version EN ISO 1163-1:1999

塑料 未增塑的聚（氯乙烯）板 第1部分：厚度不小于 1 毫米的板的类型、尺寸和特性（ISO 11833-1:2019）

Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

塑料 未增塑聚氯乙烯片材 第1部分：厚度不小于 1 毫米片材的类型、尺寸和特性

Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019); German version EN ISO 11833-1:2019

塑料.聚碳酸酯板材.类型、尺寸规格和特性(ISO/DIS 11963-2011).德文版本prEN ISO 11963-2011

Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO/DIS 11963:2011); German version prEN ISO 11963:2011

塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.第1部分:命名系统和基本规范 (ISO 19062-1-2015).德文版本EN ISO 19062-1-2015

Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19062-1:2015); German version EN ISO 19062-1:2015

塑料 - 抗冲击聚苯乙烯 (PS-I) 成型和挤出材料 - 第 1 部分：命名系统和规格基础 (ISO 19063-1:2015)

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19063-1:2015); German version EN ISO 19063-1:2015

塑料.苯乙烯/丙烯腈(SAN)模塑和挤塑材料.第1部分:命名体系和基本规范(ISO 19064-1-2015).德文版本EN ISO 19064-1-2015

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015); German version EN ISO 19064-1:2015

塑料 苯乙烯/丙烯腈(SAN)成型和挤出材料 第1部分：命名系统和规格基础

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015); German version EN ISO 19064-1:2015

塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压材料.第1部分:命名制度和规范基础(ISO 19065-1-2014);德文版本EN ISO 19065-1-2014

Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料 丙烯腈-苯乙烯-丙烯酸酯

Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...

塑料 未增塑聚（草案）

Plastic unplasticized poly(draft)

塑料 未增塑聚（氯乙烯）（PVC-U）模塑和挤出材料 第1部分：命名系统和规范基。↖SO 21306-1:2019）

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21306-1:2019)

塑料 未增塑聚氯乙烯(PVC-U)成型和挤出材料 第1部分：命名系统和规格基础

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21306-1:2019); German version EN ISO 21306-1:2019

塑料. 聚苯乙烯(PS)模塑和挤塑材料. 第1部分: 命名系统和规格依据(ISO 24022-1-2020); 德文版 EN ISO 24022-1-2020

Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24022-1:2020); German version EN ISO 24022-1:2020

塑料 聚（甲基丙烯酸甲酯）（PMMA）成型和挤出材料 第1部分：命名系统和规范基。↖SO 24026-1:2020）

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)

塑料 聚甲基丙烯酸甲酯(PMMA)成型和挤出材料 第1部分：命名系统和规格基础

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020); German version EN ISO 24026-1:2020

热塑性塑料管材和管件 维卡软化温度 第1部分：通用试验方法（草案）

Vicat softening temperature of thermoplastic pipes and fittings Part 1: General test method (draft)

热塑性塑料管材和管件 维卡软化温度 第1部分：通用试验方法（ISO 2507-1:1995）

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)

热塑性塑料管材和配件 维卡软化温度 第2部分：未增塑聚（草案）

Vicat softening temperature of thermoplastic pipes and fittings Part 2: Unplasticized poly(draft)

热塑性塑料管材和配件 维卡软化温度 第2部分：未增塑聚（氯乙烯）（PVC-U）或氯化聚（氯乙烯）（PVC-C）管材和配件以及高抗冲击性聚（氯乙烯）的试验条件）（光伏

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV

热塑性塑料管材和管件 维卡软化温度 第2部分：未增塑聚乙烯的测试条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) ...

热塑性塑料管道和配件 维卡软化温度 第3部分：丙烯腈/丁二烯/苯乙烯（草案）

Vicat Softening Temperature of Thermoplastic Pipe and Fittings Part 3: Acrylonitrile/Butadiene/Styrene (Draft)

热塑性管材和管件维卡软化温度第3部分：丙烯腈/丁二烯/苯乙烯(ABS)和丙烯腈/苯乙烯/丙烯酸酯(ASA)管材和管件的试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995); German version EN ISO 2507-3:2017

塑料.耐冲击聚苯乙烯模塑和挤出材料.第1部分:命名体系与基础规范

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999

塑料 热塑性塑料 维卡软化温度（草案）

Vicat Softening Temperature of Plastic Thermoplastics (Draft)

塑料 热塑性塑料 维卡软化温度（草案）

Vicat Softening Temperature of Plastic Thermoplastics (Draft)

塑料-热塑性塑料-维卡软化温度（VST）的测定（ISO 306：2004）；德文版 EN ISO 306:2004

Plastics – Thermoplastics – Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004

塑料. 热塑材料. 维卡软化温度(VST)的测定(ISO 306-2013); 德文版本EN ISO 306-2013

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013); German version EN ISO 306:2013

塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.第1部分:命名体系和基本规范

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997); German version EN ISO 4894-1:1999

塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); English version of DIN EN ISO 8257-1:2006-06

塑料管道系统在气体和水分配中的要求和检验 - 第A1部分：用于供水的PVC-U管材及由此制造成形件的要求和检验

Requirements and tests for plastic pipe systems in gas and water distribution – Part A1: Pipes and formed parts made of PVC-U for water distribution

塑料管道和导管系统.热塑性管和配件.维卡(Vicat)软化温度(VST)的测定

Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)

热塑性塑料维卡软化温度(VST)的测定

Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)

塑料.丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料.第1部分:命名系统和分类基础

Plastics.Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials.Part 1:Designation system and basis for specifications

塑料 氯化聚氯乙烯混合料

Plastic—Chlorinated poly(vinyl chloride)compounds

塑料 汽车用丙烯腈-丁二烯-苯乙烯(ABS)专用料

Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for automobile

热塑性塑料管材、管件 维卡软化温度的测定

Thermoplastics pipes and fitting-Determination of vicat softening temperature

塑料. 热塑性塑料维卡软化温度的测定方法

Plastics. Method for determination of Vicat softening temperature of thermoplastics

塑料. 热塑材料. 维卡软化温度的测定

Plastics. Thermoplastic materials. Determination of Vicat softening temperature

用于制造门窗的层压未增塑聚氯乙烯（PVC-U）型材 要求和试验方法

Laminated Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Requirements and test methods.

塑料 甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯 (MABS) 成型和挤出材料 第1部分：命名系统和规格基础

Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料 - 聚苯乙烯（ps）成型和挤出材料 - 第2部分:试样的制备和性能的测定

Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

塑料 - 聚（甲基丙烯酸甲酯）（pmma）成型和挤出材料 - 第1部分:指定系统和规格

Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications

热塑性管材和管件.维卡软化温度.第1部分:通用试验方法

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method

热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV

热塑性管材和管件.维卡软化温度.第3部分:丙烯腈/丁二烯/苯乙烯(ABS)和丙烯腈/苯乙烯/丙烯酸酯(ASA)管材和管件的试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

热塑性塑料管材和管件 维卡软化温度 聚氯乙烯基（PVC-U、PVC-C、PVC-HI）和丙烯腈基（ABS、ASA）管材和管件的一般试验方法和试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - General test method and test conditions for vinyl chloride-based (PVC-U, PVC-C, PVC-HI) and acrylonitrile-based (ABS, ASA) pipes and fittings

塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.第1部分:命名系统和基本规范

Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料 耐冲击聚苯乙烯(PS-I)模塑和挤塑材料 第1部分:命名系统和基本规范

Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料.热塑性材料.维卡特(VICAT)软化温度的测定

Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)

塑料.热塑性材料.维卡软化温度（VST）的测定

Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)

塑料 苯乙烯/丙烯腈(SAN)模塑和挤塑材料 第1部分:命名体系和基本规范

Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第1部分:命名体系和基本规范

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications

塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样的制备和性能的测定

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

热塑性塑料管和配件.维卡软化温度用试验方法

Thermoplastics pipes and fittings -- Test method for Vicat softening temperature

热塑性塑料维长软化点试验方法

Testing method for Vicat softening temperature of thermoplastics

塑料.热塑性材料.维卡软化温度的测定

Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)

塑料 未增塑聚氯乙烯（PVC-U）成型和挤出材料 第1部分：命名体系和规范基。↖SO 21306-1:2019）

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21306-1:2019)

塑料 聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料 第1部分：命名体系和规范基。↖SO 24026-1:2020）

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)

塑料管道及管件 维卡软化温度 第1部分：通用试验方法（ISO 2507-1:1995）

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)

塑料管道和配件 维卡软化温度 第2部分：未增塑聚氯乙烯 (PVC-U) 或氯化聚氯乙烯 (PVC-C) 管道及连接件和耐冲击聚氯乙烯……

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride)...

热塑性管材和管件 维卡软化温度 第3部分：丙烯腈 丁二烯 苯乙烯 (ABS) 和丙烯腈 苯乙烯 丙烯酸酯 (ASA) 管材及管件的测试条件 (ISO 2507-3:1995)

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)

塑料 热塑性材料 维卡软化温度（VST）的测定

Plastics - Thermoplastic materials - Determination of the Vicat softening temperature (VST)

塑料 热塑性材料 维卡软化温度（VST）的测定

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管

Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable

塑料 建筑用未增塑聚氯乙烯（PVC-U）型材 第1部分：浅色型材的名称

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles

塑料管道和管道系统 热塑性管道和配件 维卡软化温度（VST）的测定

Plastic piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)

聚乙烯醇缩氯酯片材 未增塑聚氯乙烯片材 第1部分：厚度不小于1毫米的片材的类型、尺寸和特性（ISO 11833-1:2019）

Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

未增塑聚氯乙烯片材 类型、尺寸和特性 第2部分：厚度小于1毫米的片材（ISO 11833-2:1998）

Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)

热塑性管和附件 维卡软化温度 第1部分：一般试验方法（ISO 2507-1:1995）

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)

热塑性管材和配件 维卡软化温度 第3部分：丙烯腈/丁二烯/苯乙烯（ABS）和丙烯腈/苯乙烯/醋酸酯（ASA）管材和配件的试验条件（ISO 2507-3:1995）

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)

塑料 热塑性材料 软化温度（VST）的测定（ISO 306:2022）

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)

塑料 未增塑的聚（氯乙烯）板 类型、尺寸和特性 第2部分：厚度小于 1 毫米的板材（ISO 11833-2:1998）

Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)

热塑性塑料管材和管件 维卡软化温度 第2部分：未增塑聚乙烯的测试条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride)...