美利体育登录入口官网

0.25mm(0.010英寸)或更大厚度聚乙烯薄膜标准规范

Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

非金属衬垫材料拉伸试验的标准试验方法

Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

塑料管道和管道系统 热塑性塑料管 拉伸性能的测定

Plastics piping and ducting systems — Thermoplastics pipes — Determination of tensile properties

硬质泡沫塑料.拉伸性能的测定

Rigid cellular plastics - Determination of tensile properties

纺织品的检验.用恒定拉伸极限间的重复拉伸载荷测定单股和合股弹性纱线的弹性特性

Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits

冷涂接缝密封剂 试验方法 第1部分：固化速度的测定（草案）

Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure

铜及铜合金-拉应力美利体育登录入口官网-5%氨水试验

Copper and copper alloys - Detection of tensile stress - 5 % ammonia test; German version EN 14977:2006

航空航天系列.光电连接件.试验方法.第615部分:光学元件.恒温下电缆连接完整性

Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001

航空航天系列-电气和光学连接元件；测试方法 - 第 615 部分：光学元件；温度下的连接完整性

Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).

光纤.第1-30部分:测量方法和试验规程.纤维验收试验(IEC 60793-1-30-2010).德文版本EN 60793-1-30-2011

Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test (IEC 60793-1-30:2010); German version EN 60793-1-30:2011

塑料.超高分子重量聚乙烯(PE-UHMW)模塑和挤制材料.第2部分:试样制备和性能测定(ISO 11542-2-1998 + Cor. 1-2007).德文版本EN ISO 11542-2-1998 + AC-2008

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007); German version EN ISO 11542-2:1998 + AC:2008

片基与胶片拉伸性能的测定方法

Method for determining the tensile properties of photographic film and film base

纤维增强塑料拉伸性能试验方法

Fiber-reinforced plastics composites---Determination of tensile properties

力学性能测量 REBCO带材室温拉伸试验方法

Mechanical properties measurement—Room temperature tensile test on REBCO wires

塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤塑材料 第2部分:试样的制备和性能的测定

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

塑料.超高分子量聚乙烯(PE-UHMW)模制和挤压成型材料.第2部分:试样制备和特性测定.技术勘误1

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Technical Corrigendum 1

硬质泡沫塑料.拉伸性能的测定

Rigid cellular plastics - Determination of tensile properties

金属材料.薄板材和带材.拉弯过程中回弹性的评估方法

Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending

硫化橡胶或热塑性橡胶 拉伸应力 应变性能的测定

Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

奥拉维亚与飞船 玻璃钢增强塑料 拉伸试验

Aerospace series - Glass fibre reinforced plastics - Tensile test

超导性 第25部分：机械性能测量 REBCO导线室温拉伸强度测试（IEC 61788-25:2018）

Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires (IEC 61788-25:2018)

车用发动机油橡胶相容性测定法

Determination of rubber compatibility of motor oil

航空航天系列 钢制镀镉、低高度、标准对边、开槽/槽形、六角螺母 等级：900 MPa（环境温度）/235 ?C

Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated, Classification: 900 MPa (at ambient temperature)/235 ?C

聚乙烯醇缩氯酯片材 未增塑聚氯乙烯片材 第1部分：厚度不小于1毫米的片材的类型、尺寸和特性（ISO 11833-1:2019）

Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

硬质泡沫塑料 拉伸性能的测定

Rigid cellular plastics - Determination of tensile properties (ISO 1926:2005, IDT)

刚性泡沫塑料 拉伸性能的测定（ISO 1926:2009 等同）

Rigid cellular plastics - Determination of tensile properties (ISO 1926:2009, IDT)

硫化橡胶或热塑性橡胶 拉伸应力 应变特性的测定（ISO 37:2005 IDT）

Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties (ISO 37:2005, IDT)

塑料在拉伸应力下的寿命评估

Life prediction of plastics under tensile stress