美利体育登录入口官网

圆柱蜗杆传动公差及检验方法

Cylindrical Wormgearing Tolerance and Inspection Methods

圆柱形涡轮传动装置公差和检验方法(公制)

Cylindrical Wormgearing Tolerance and Inspection Methods (Metric)

渐开线花键及检验标准

Involute Splines and Inspection Standard

米制螺纹:M型

Metric Screw Threads: M Profile

公制螺纹：M 型材

Metric Screw Threads: M Profile

公制螺纹：M 型材

Metric Screw Threads: M Profile

米制螺纹.MJ牙形

Metric Screw Threads: MJ Profile

公制螺纹：MJ Profile

Metric Screw Threads: MJ Profile

统一螺纹 第1部分: 公称直径大于或等于1/4英寸的螺纹 要求

Unified threads Part 1: Requirements for threads with a nominal diameter greater than or equal to 1/4 inch

统一标准螺纹.第3部分:直径小于1/4 in的螺纹.要求

Unified screw threads - Part 3:Screw threads with diameters below 1/4 in - Requirements

工程用极限与配合.第1部分:极限与公差指南

Limits and fits for engineering Part 1: Guide to limits and tolerances

ISO 公制螺纹 第1部分：原理和基本数据

ISO metric screw threads Part 1 : Principles and basic data

ISO 公制螺纹 第2部分：所选尺寸限制规范

ISO metric screw threads Part 2 : Specification for selected limits of size

一般用途的风扇 公差、转换方法和技术数据表示

Fans for general purposes. Tolerances, methods of conversion and technical data presentation

惠氏螺纹牙样的平行螺纹.要求

Parallel screw threads of Whitworth form – Requirements

丝锥.统一磨制螺纹丝锥规范:制造公差

Screwing taps - Specification for unified ground thread taps - Manufacturing tolerances

焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置

Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position

产品几何规范 (GPS) — 线性尺寸公差 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

用于输送流体的热塑性塑料管道 尺寸和公差 公制系列

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series

圆柱齿轮.ISO侧翼公差分类体系.齿轮齿侧翼相关偏差容许值和定义

Cylindrical gears. ISO system of flank tolerance classification. Definitions and allowable values of deviations relevant to flanks of gear teeth

滚珠丝杠 第3部分：验收条件和验收测试

Ball screws — Part 3 : Acceptance conditions and acceptance tests

不带固定孔的带圆角可转位硬性金属(碳化物)镶嵌件.尺寸规格

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions

ISO 通用公制螺纹 公差 螺纹极限偏差

ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads

ISO 通用公制螺纹 公差 热镀锌外螺纹与镀锌后公差位置H或G攻丝的内螺纹配合的尺寸限制

ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

ISO 通用公制螺纹 公差 热镀锌外螺纹与镀锌后公差位置 H 或 G 的内螺纹配合的尺寸限制

ISO general purpose metric screw threads. Tolerances - Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing

ISO 通用公制螺纹 公差 内螺纹尺寸限值 用于与热镀锌外螺纹配合 镀锌前最大尺寸公差位置 h

ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing

ISO通用公制螺纹 公差 内螺纹和外螺纹的尺寸极限（精细和中等公差等级 第一和第二选择）

ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal and external threads (fine and medium tolerance qualities, first and second choices)

公制粗螺纹限界尺寸及公差（ＩＳＯ制）（中品级–５Ｈ、６Ｈ、６ｈ、６ｇ）（标称直径１至６８ｍｍ，螺距０．２５至６ｍｍ）

Limits of Sizes and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality:Medium,Tolerances: 5H`6i6H and 6h `6i6g)(Diameters form 1 to 68mm and Pitches 0.25 to 6mm)

ISO一般用途米制螺纹 第20部分：带优先公差级的粗牙螺纹的尺寸极限 公称直径1mm-68mm

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm

ISO一般用途米制螺纹.第20部分:带优先公差级的粗牙螺纹的尺寸极限.公称直径1mm-68mm

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm

ISO 通用公制螺纹 第20部分：具有首选公差等级的粗牙螺纹尺寸限制

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm

ISO 通用公制螺纹 第22部分：具有首选公差等级的细牙螺纹尺寸限制

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm

ISO通用米制螺纹.第23部分:优选公差级的细牙螺纹的极限尺寸.标称直径53mm至110mm

General purpose ISO metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 53 mm to 110 mm

ISO 通用公制螺纹 - 第 50 部分：成型内螺纹公差等级组合

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads

ISO通用米制螺纹. 第51部分:过渡配合用外螺纹 (模型:紧密配合用螺纹). 公差, 极限偏差, 尺寸极限

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes

ISO 通用公制螺纹 第51部分：过渡配合的外螺纹（以前：过盈配合的螺纹） 公差、极限偏差、尺寸限制

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes

塞规

Feeler Gauges

塞规

Feeler gauges

几何产品规范（GPS） 一般公差 几何公差和线性和角度尺寸公差的表格值 没有单独的公差指示

Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

产品几何规范 (GPS) 一般公差 几何公差以及线性和角度尺寸公差的表格值 无单独公差指示

Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

产品几何规范(GPS)一般公差 几何公差以及线性和角度尺寸公差的表格值 无单独公差指示

Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

公制偏梯形螺纹 第3部分：偏差和公差

Metric buttress threads - Part 3: Deviations and tolerances

公制锯齿螺纹. 第3部分: 偏差和公差

Metric buttress threads - Part 3: Deviations and tolerances

公制偏梯形螺纹 第3部分：偏差和公差

Metric buttress threads - Part 3: Deviations and tolerances

滚动轴承 滚动轴承零件 第1部分：圆柱滚子

Rolling bearings - Parts of rolling bearings - Part 1: Cylindrical rollers

滚动轴承.圆柱滚柱轴承.第2部分:提高精度的双列,带保持架的滚动轴承.

Rolling bearings - Cylindrical roller bearings - Part 4: Double row, with cage, increased accuracy

滚动轴承 带保持架的滚针轴承 外形尺寸、产品几何规格（GPS）和公差值

Rolling bearings - Needle roller bearings with cage - Boundary dimensions, geometrical product specification (GPS) and tolerance values

平面刃硬质合金无固定孔转位式刀片

Indexable hardmetall (carbide) inserts with wiper edges, without fixation hole

产品几何技术规范(GPS) 外部尺寸公差等级符合DIN EN ISO 286-1和DIN EN ISO 286-2 公称尺寸1 mm至500 mm的工作量规和相关验收量规 量规尺寸和公差

Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tole

产品几何技术规范(GPS). 外部尺寸公差等级符合DIN EN ISO 286-1和DIN EN ISO 286-2, 公称尺寸1 mm至500 mm的工作量规和相关验收量规. 量规尺寸和公差

Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tole

产品几何规格

Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and t...

产品几何技术规范(GPS). 内部尺寸公差等级符合DIN EN ISO 286-1和DIN EN ISO 286-2, 公称尺寸1 mm至500 mm的车间塞规和球形塞规. 量规偏差和公差

Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges

产品几何规范(GPS)车间塞规和球形塞规 内径公差等级符合 DIN EN ISO 286-1 和 DIN EN ISO 286-2 标称尺寸为 1mm 至 500mm 量规的偏差和公差

Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges

橡胶制品.第5部分:橡胶板材和板材制品尺寸公差

Rubber products; dimensional tolerances, rubber sheets and products made from sheets

ISO 公制螺纹用钢丝螺套 第2部分：螺套用螺旋螺纹、螺纹公差

Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances

产品几何规范(GPS)直边 第1部分：钢直边

Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions

产品几何量技术规范(GPS).90?角尺.第1部分:90?钢角尺

Geometrical Product Specifications (GPS) - Squares 90° - Part 1: Steel squares 90°

开槽半沉头圆柱端螺钉

Slotted raised countersunk head screws with dog point

焊接.焊接结构通用公差.长度和角度的尺寸、形状和位置

Welding - General tolerances for welded constructions - Dimensions for lengths and angles; shape and position (ISO 13920:1996); German version EN ISO 13920:1996

焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置（ISO 13920:2023）

Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:2023)

维护功能和管理；德语版和英语版 prEN 17948:2023

Maintenance function and management; German and English version prEN 17948:2023 / Note: Date of issue 2023-03-03

产品几何量技术规范(GPS)-ISO线性尺寸公差代码体系.第2部分:孔和轴的标准公差等级和极限偏差表(ISO 286-2-2010);德文版本EN ISO 286-2-2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010); German version EN ISO 286-2:2010

几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表（ISO 286-2:2010 + Cor 1:2013）（包括勘误表：2013）

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)

产品几何规范(GPS)线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013

圆柱齿轮 ISO侧翼公差分类体系 第1部分：齿轮齿侧翼相关偏差容许值和定义

Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth

圆柱齿轮 ISO 齿面公差分类系统 第2部分：双齿面径向复合偏差的定义和允许值

Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations (ISO 1328-2:2020)

橡胶制品公差 第2部分：几何公差

Tolerances for rubber products. Part 2: Geometrical tolerances

航空航天.MJ螺纹.第3部分:液体系统配件的限制尺寸

Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems (ISO 5855-3:1999); Text in German and English

航空航天 MJ 螺纹 第3部分：流体系统配件的限制尺寸

Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems (ISO 5855-3:1999); Text in German and English

有部分圆柱形固定孔和圆角的可转位硬质合金刀片 尺寸规格

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions

商用车辆和公共汽车.1、2、3 和 4型起动电机的安装尺寸

Commercial vehicles and buses; mounting dimensions for starter motors of types 1, 2, 3 and 4; identical with ISO 7650:1987

ISO一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸极限.中等质量

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)

ISO 通用公制螺纹 公差 第2部分：通用外螺纹和内螺纹的尺寸限制

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) / Note: To be amended by DIN ISO 965-2/A1 (2021-01).

ISO 通用公制螺纹 公差 第3部分：螺纹的极限偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).

ISO通用公制螺纹 公差 第4部分：热浸镀锌外螺纹的尺寸极限 用于与镀锌后按H或G公差位置制造的内螺纹配合（ISO 965-4:2025）

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing (ISO 965-4:2025)

ISO通用公制螺纹 公差 第5部分：与镀锌前公差等级为h的最大尺寸外螺纹相配合的内螺纹尺寸极限（ISO 965-5:2025）

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing (ISO 965-5:2025)

焊接.焊接结构的一般公差 长度和角度的尺寸.形状和位置

Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position

冲压件形状和位置未注公差

The shape and position of stamping parts are not toleranced

钢质模锻件 公差及机械加工余量

Steel die forgings—Tolerance and machining allowance

冲压件形状和位置未注公差

Unnoted tolerance of shape and position for stamping parts

滚动轴承 套筒型直线球轴承 外形尺寸和公差

Rolling bearings.Sleeve type linear ball bearings.Boundary dimensions and tolerances

滚珠丝杠副 第3部分：验收条件和验收检验

Ball screws—Part 3:Acceptance conditions and acceptance tests

圆柱直齿渐开线花键(米制模数.齿侧配合).第3部分:37.5°压力角尺寸表

Straight cylindrical involute Splines.Metric module, side fit.Part 3: 37.5°pressure angle dimensions tables

圆柱直齿渐开线花键.(米制模数.齿侧配合)第4部分:45°压力角尺寸表

Straight cylindrical involute splines.Metric module, side fit.Part 4: 45°pressure angle dimensions tables

橡胶制品的公差 第2部分：几何公差

Tolerances for rubber products — Part 2: Geometrical tolerances

液压传动 单杆缸附件的安装尺寸 第1部分：16MPa中型系列和25MPa系列

Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 1:16 MPa medium and 25 MPa series

活节螺栓

Eye bolts

可互换性基本准则. 几何产品技术规格. 线性尺寸公差系统. 孔和轴的公差系列和极限偏差表

Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts

互换性的基本规范 未指定公差的最大尺寸偏差

Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

液体输送用热塑性塑料管.尺寸和公差.第1部分:公制系列

Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series

模锻件公差及机械加工余量

Tolerances and machining allowances of die forgings

工业铂电阻温度计和铂温度敏感器

Industrial platinium resistance thermometer and platinum temperature sensors

ISO 普通螺纹 外螺纹和内螺纹 中等级 正常旋合长度 极限尺寸

General-purpose external and internal ISO metric thread. Medium quality class and normal thread length. Limit dimensions.

三角形和方形硬质合金刀片 正型 无孔且带断屑槽 尺寸与标识

Triangular and square positive tungsten carbide inserts, hole-free with chipbreakers. Dimensions and markings.

圆柱形柄刀夹.第6部分:圆柱状座的E型刀柄

Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat

滑动轴承-公差-第1部分:配合

Plain bearings — Tolerances — Part 1: Fits

圆柱齿轮.ISO侧翼公差分类体系.第1部分:齿轮齿侧翼相关偏差容许值和定义

Cylindrical gears.ISO system of flank tolerance classification.Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth

工业电扇.公差、转化方法和技术数据表示

Industrial fans - Tolerances, methods of conversion and technical data presentation

焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置

Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position

焊接 焊接结构的一般公差 长度和角度、形状和位置的尺寸

Welding. General tolerances for welded constructions. Dimensions for lengths and angles, shape and position

冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管.修改件1

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes; Amendment 1

非螺纹密封的管螺纹 第1部分:标记、尺寸和公差

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation

ISO公制梯形螺纹 公差 第2部分：尺寸极限

ISO metric trapezoidal screw threads - Tolerances - Part 2: Limits of sizes

橡胶.产品公差.第2部分:几何公差

Rubber - Tolerances for products - Part 2: Geometrical tolerances

六角螺母(1型).产品等级C级

Hexagon regular nuts (style 1) - Product grade C

紧固件公差.第3部分:螺栓、螺钉和螺母用垫圈 产品等级为A、C和F级

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F

ISO通用米制螺纹.公差.第1部分：原理和基本数据

ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data

ISO通用公制螺纹-公差-第3部分：结构螺纹的偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads

ISO 通用米制螺纹 公差 第5部分：与热镀锌外螺纹配合的内螺纹尺寸极限 镀锌前最大尺寸为公差位置 h

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing

ISO通用公制螺纹 公差 第6部分：内螺纹和外螺纹尺寸极限（细度和中等公差等级 第一和第二选择）

ISO general purpose metric screw threads - Tolerances - Part 6: Limits of sizes for internal and external threads (fine and medium tolerance qualities, first and second choices)

拖拉机用热塑性塑料零件.通用技术条件

General specifications of thermoplastic parts for tractors

滚动轴承 硬质合金球

Rolling bearings-Cemented carbide balls

ISO通用米制螺纹.公差.第5部分:与电镀前最大公差级为h的热浸电镀外螺纹配合的内螺纹尺寸的限值

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

铸件.尺寸公差和机械加工余量体系

Castings -- System of dimensional tolerances and machining allowances

滚动轴承.圆锥滚柱轴承

Rolling bearings.Tapered roller bearings

螺旋弹簧.第2部分:螺旋压簧规范表达式

Coil springs -- Part 2: Expression of the specification on helical compression springs

螺母丝锥

Nut taps

航空航天系列 金属材料 金属半成品尺寸标准编写和呈现规则

Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products

ISO一般用途公制螺纹 公差 第4部分：热浸镀锌外螺纹与镀锌后按H或G公差位置制造的内螺纹配合的尺寸极限

ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing

ISO通用公制螺纹 公差 第5部分：与镀锌前最大公差等级为h的热浸镀锌外螺纹配合的内螺纹尺寸极限

ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing

ISO通用公制螺纹 公差 第4部分：热浸镀锌外螺纹与镀锌后公差位置为H或G的内螺纹配合的尺寸限制

ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing

ISO通用公制螺纹 公差 第5部分：与热浸镀锌外螺纹配合的内螺纹尺寸限制 镀锌前公差位置h的最大尺寸

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing

航空和航天. ISO M 螺纹.制造商使用极限牙形和 ISO 公差

Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for manufacturers.

航空和航天.ISO M 螺纹.螺栓和螺母的极限牙形和 ISO 公差

Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.

自行车.底部托架组件用螺纹

Cycles. Screw threads used in bottom bracket assemblies.

手表用尺寸至3mm未注公差的线性尺寸公差

Tolerances for watch linear dimensions up to 3 mm without individual tolerance indications

门板 高度、宽度、厚度和方度 公差等级

Door leaves - Height, width, thickness and squareness - Tolerance classes

多晶金刚石刀片 尖头 尺寸 类型（ISO 16463:2014 IDT）

Polycristalline diamond inserts, tipped - Dimensions, types (ISO 16463:2014, IDT)

ISO通用公制螺纹 公差 第1部分：原则和基本数据（ISO 965-1:2013 等同采用）

ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013, IDT)

ISO通用公制螺纹 偏差 第2部分：内外螺纹的尺寸极限（对于M1.6至M100的6H和6g偏差等级 以及对于M1至M1.4的5H和6h偏差等级）(ISO 965-2:2024, IDT)

ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4) (ISO 965-2:2024, IDT)

普通用途的公制螺纹 偏差 第3部分：螺纹的极限偏差（ISO 965-3:2021 等同采用）

ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads (ISO 965-3:2021, IDT)

ISO通用公制螺纹 公差 第6部分：内螺纹和外螺纹尺寸极限（精细和中等公差等级 第一和第二选择）（ISO 965-6:2024 IDT）

ISO general purpose metric screw threads — Tolerances — Part 6: Limits of sizes for internal and external threads (Fine and medium tolerance qualities, first and second choices) (ISO 965-6:2024, IDT)

焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置 （ISO 13920:1996）

WELDING. GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS. DIMENSIONS FOR LENGTHS AND ANGLES. SHAPE AND POSITION. (ISO 13920:1996).

通用公制ISO螺纹 公差 第4部分：热浸镀锌外螺纹尺寸极限 用于与镀锌后具有H或G位置公差的内螺纹配合

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing

ISO通用公制螺纹 公差 第5部分：与热浸镀锌外螺纹配合的内螺纹尺寸极限 其定位公差最大尺寸为h级...

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing