美利体育登录入口官网

近海结构用热机械控制工艺生产的钢板规范

Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)

无损检验 碳和低合金钢板和万能型钢的超声波检验 试验方法和质量分级

Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification

结构钢 热轧板、楼板和板坯

Structural steel - Hot-rolled plates, floorplates and slabs

美国机械工程师学会锅炉与压力容器规范 第II部分-A（铁质材料规格）

ASME Boiler and Pressure Vessel Code Section II, Part A (Ferrous Materials Specifications)

2021 ASME 锅炉和压力容器规范 第II部分：材料 A 部分黑色金属材料规范（从 SA-450 开始）

2021 ASME Boiler and Pressure Vessel Code SECTION II: MATERIALS Part A Ferrous Material Specifications (Beginning to SA-450)

高强度马氏体不锈钢板材、片材和带材标准规格

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

高强度马氏体不锈钢板 板材和带材的标准规格

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

用双滚轴铸造法生产的商用热轧结构高强度低合金碳钢薄板标准规格

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

用双辊铸造工艺生产的高强度低合金和超高强度的工业用结构热轧碳素钢薄板的标准规范

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process

用双辊铸造工艺生产的高强度低合金和超高强度的工业用结构热轧碳素钢薄板的标准规范

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process

使用手卡钳测量钢板宽度的标准实施规程

Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

碳素结构钢的标准规格

Standard Specification for Carbon Structural Steel

搪瓷用薄钢板的标准规范

Standard Specification for Steel, Sheet, for Porcelain Enameling

平轧不锈钢及耐热钢板薄板及带材一般要求的标准规格

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

标准规范平板不锈钢和耐热钢板 薄板和带材的一般要求

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

不锈钢和耐热钢板、薄板和带材的一般要求的标准规范

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

压力容器板 热处理 碳锰硅钢的标准规范

Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

淬火和回火铬钼和铬钼钒合金钢压力容器板的标准规范

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

淬火和回火镍铬钼合金钢压力容器板的标准规范

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

热轧和冷轧低合金结构和高强度碳素钢薄板的一般要求

Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

高强度低合金铌-钒结构钢的标准规格

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

钢板的超声波角束检验标准规范

Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

特殊用途轧制钢板的直光束超声波检验标准规范

Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

轧制结构钢棒材、板材、型材和板桩的一般要求

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

轧制结构钢棒材, 板材, 型材和板桩通用要求的标准规格

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

轧制结构钢棒材, 板材, 型材和板桩通用要求的标准规格

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

热浸镀锌法生产的锌镀层(镀锌)或锌,铁合金镀层(合金化热镀锌)钢板的标准规格

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

沉淀硬化不锈钢和耐热钢板材、薄板和带材标准规范

Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

用于波纹钢管的钢板 金属涂层和聚合物预涂标准规范

Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

对外露建筑产品采用热浸工艺涂覆且采用卷材涂装工艺进行预涂的金属钢板的标准规格

Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

对外露建筑产品采用热浸工艺涂覆且采用卷材涂装工艺进行预涂的金属钢板的标准规格

Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

钢板用于特殊应用的厚度拉伸试验标准规范

Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

钢板用于特殊应用的厚度拉伸试验标准规范

Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

符合化学成分要求的结构质量碳钢板材的标准规范

Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

由热机械控制工艺生产的压力容器钢板标准规格

Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process lpar;TMCPrpar;

热机械控制工艺（TMCP）生产的压力容器用钢板的标准规范

Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

用直接淬火法生产的压力容器用9%镍合金钢板的标准规范

Standard Specification for Steel Plates, 9?%? Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

压力容器 冷凝器和热交换器铜合金板和板材的标准规范

Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

搪瓷用薄钢板的再煮倾向的试验方法

Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

在湿润箱中用金属保护剂防止生锈的标准试验方法

Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

锌的富锌底漆/铬酸盐复合涂层在钢上的成型性的标准测试方法

Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

厚度3 mm或3 mm以上热轧钢板材尺寸规格,形状和质量公差规范

Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape

厚度3 mm或3 mm以上热轧钢板材尺寸规格,形状和质量公差规范

Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape

焊接气瓶用钢板及钢带

Steel sheet and strip for welded gas cylinders

调质或沉淀硬化条件下的高屈服强度结构钢板材和宽平板——第2部分：调质钢的交货条件

Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation Hardened Conditions - Part 2: Delivery Conditions for Quenched and Tempered Steels

简单压力容器用钢 板材、带材和棒材的交货技术要求

Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars

固定近海结构的可焊接结构钢.交付技术条件

Weldable structural steels for fixed offshore structures - Technical delivery conditions

航空航天系列. 钢材. 热轧薄板和厚板. 尺寸

Aerospace series. Steel. Sheets and plates, hot rolled. Dimensions

航空航天系列.钢和耐热合金.锻制产品.技术规范.板材,薄板材和带材

Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Plate, sheet and strip

热镀锌铝镁合金钢片 商业、拉延和结构质量

Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities

钢板 55% 铝锌合金 采用连续热浸镀工艺 具有商业、拉伸和结构品质

Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities

涂料用试验板

Test Panels for Paints

铁塔制造 激光切割应用技术规范

Technical Specifications for Laser Cutting Application in Tower Manufacturing

承压特种美利体育官网首页网址制造用钢板管理规定

Regulations on the management of steel plates used in the manufacture of pressure-bearing special equipment

钢结构用带状弹性轴承 第140部分：建筑材料 要求、试验和检查 修正案A1

Elastic strip bearings for steel structures - Part 140: Requirements, tests and inspections for construction materials - Amendment A1

结构用橡胶隔振垫 带钢筋的橡胶隔振垫 建筑构造和设计

Rubber vibration isolation pads for structures Rubber vibration isolation pads with steel bars Building construction and design

平轧钢冷弯

Cold bending of flat rolled steel

简单压力容器用钢 钢板、带材和棒材的交货技术条件

Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

用于固定海上结构的可焊接结构钢 交货技术条件 第1部分：钢板

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates; German version EN 10225-1:2019

磁性材料.有规定机械性能和磁性能要求的薄钢板和带钢规范

Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability; German version EN 10265:1995

欧洲规范 3 钢结构设计 第 1-3 部分：一般规则 冷成型构件和钢板的补充规则

Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting; German and English version prEN 1993-1-3:2022

欧洲规范 3 钢结构设计 第1-3部分：一般规则 冷弯构件和板材的补充规则

Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting; German and English version prEN 1993-1-3:2022 / Note: Date of issue 2022-02-11*Intended as replacement for DIN EN 1993-1-3 (20...

欧洲规范 3 钢结构设计 第 1-5 部分：电镀结构元件

Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements; German and English version prEN 1993-1-5:2022

欧洲规范 3 钢结构设计 第1-5部分：电镀结构元件

Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements; German and English version prEN 1993-1-5:2022 / Note: Date of issue 2022-02-11*Intended as replacement for DIN EN 1993-1-5 (2019-10), DIN EN 1993-1-5 Berichtigung 1 (2020-07).

欧洲规范 3：钢结构设计 第1-7部分：受非平面载荷的板结构 草案

Draft Document - Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading; German and English version prEN 1993-1-7:2023

欧洲规范3：钢结构设计 第1-7部分：受平面承载以外的电镀结构（草案）

Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading

钢桥设计 第2部分: 钢拱桥

Steel Bridge Design Part 2: Steel Arch Bridges

航空航天系列 钢材 冷轧板材和带材 厚0,1 mm <= a <= 3 mm 尺寸（草案）

Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm <= a <= 3 mm - Dimensions

航空航天系列 钢 热轧薄板和板材 尺寸

Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions; German and English version EN 2590:2017

金属板制屋顶和幕墙产品. 钢, 铝或者不锈钢板的自承规格. 第1部分: 钢; 德文版本EN 508-1-2014

Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2014

非破坏性美利体育登录入口官网钢管 第9部分：用于焊接钢管制造的带/板自动化超声波美利体育登录入口官网 修正案1 (ISO 10893-9:2011/DAM 1:2019)

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing of strip/plate for use in the manufacture of welded steel tubes Amendment 1 (ISO 10893-9:2011/DAM 1:2019)

电站钢制对焊管件

Steel butt-welding fittings for power plant

工程结构加固材料安全性鉴定技术规范

Technical code for safety appraisal of engineering structural strengthening materials

工模具钢

Tool and die steel

钢板 二次加工脆化试验方法

Steel sheets—Secondary work embrittlement test method

钢板和钢带包装、标志及质量证明书的一般规定

General rule of package,mark and certification for steel plates(sheets)and strips

钢板和钢带包装、标志及质量证明书的一般要求

General Requirements for Packaging, Marking and Quality Certificate of Steel Plates and Steel Strips

热交换器用钢板搪瓷边缘覆盖率的测定

Vitreous ang porcelain enamels.Determination of the edge covering on enamelled steel plate to be used in heat exchangers

自升式平台桩腿用钢板

Steel plate for self-elevating drilling units leg structure

煤浆输送管用热轧宽钢带

Hot rolled wide strips for coal slurry line pipe

塑料模具钢 第4部分：预硬化钢板

Steels for plastic mould—Part 4: Pre-hardenging steel plate

重型机械通用技术条件 第3部分：焊接件

Heavy mechanical general technical specification—Part 3: Welding parts

船舶及海洋工程用结构钢

Structural steel for ship and ocean engineering

覆铜用优质碳素钢钢板及钢带规范

Specification for high-quality carbon steel plates and strips for copper cladding

舰艇用 10CrNi3MoV、10CrNi3MoCu和10CrNi2MoCu 钢板规范

Specification for 10CrNi3MoV 10CrNi3MoCu 10CrNi2MoCu steel plates for military ship

铸造木模型用条式提升器.结构

Strip lifting screws for wooden cast patterns. Design

钢结构建筑用轧制产品. 通用规格

Rolled products for structural steel constructions. General specifications

国际水管和机械官员协会制定的瓷釉涂层成型钢卫浴美利体育官网首页网址标准

Standard for Enamel-Coated Formed Steel Plumbing Fixtures by the International Association of Plumbing and Mechanical Officials

粮用钢筒仓 第2部分：要求

Aerial steel silo for grain storage. Part 2 - Requirements.

厚度小于或等于3毫米的钢带和钢带的交替弯曲试验方法

Sheets and strips 3 mm thick or less. Reverse bend test method.

用于建造粮仓、谷物干燥塔及其他类似结构的平钢板

Steel sheet for silos, cereal dryer buildings and other similar structure.

镀锌热浸或电镀镀铝锌合金钢板开口型材 冷成型 用于干式建筑系统室内结构 第3部分：型材……

Hot-dip zinc coated or electrolytic zinc-coated or aluminium-zinc alloy coated steel sheet shapes, cold formed drywall construction. Part 3: Special profiles.

铁塔、井架及其他金属结构组件的检查 第2部分：铁塔、井架及其他金属结构的要求

Inspection of steel components of towers, derricks and other metallic structures. Part 2: Requirements for towers, derricks and other metallic structures.

高屈服强度扁钢材.第1部分:一般要求.修改件1

High yield strength flat steel products - Part 1: General requirements; Amendment 1

搪瓷浴缸

Porcelain Enameled Bathtubs

混凝土模板金属板

Metal Panels for Concrete Form

交付到全加工状态的冷轧晶粒取向电工钢薄板和钢带

Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state

巴拿马式导缆器

Panama chocks

造船.钢板起动储气罐

Shipbuilding -- Steel plate starting air reservoirs

压力容器用钢板的超声检验

Ultrasonic testing of steel plates for pressure vessels

中温用压力容器用钢板

Steel plates for pressure vessels for intermediate temperature service

气瓶用钢板、钢板及钢带

Steel sheet, plates and strip for gas cylinders

低温压力容器用碳素钢板

Carbon steel plates for pressure vessels for low temperature service

塔结构用高拉伸强度钢

High tensile strength steel for tower structural purposes

热轧钢板、薄板及钢带的尺寸、形状、质量及允许误差

Dimensions, shape, mass and permissible variations of hot rolled steel plates, sheets and strips

热浸镀55%铝锌合金钢板及钢带

Hot-dip 55 % aluminium-zinc alloy-coated steel sheet and strip

钢甲板

Steel Decks

镍铬钼钢钢材

Nickel chromium molybdenum steels

铬钢钢材

Chromium steels

锅炉及压力容器用铬钼合金钢板

Chromium-molybdenum alloy steel plates for boilers and pressure vessels

冷轧不锈钢板,薄钢板和带钢

Cold-rolled stainless steel plate, sheet and strip

弹簧用冷轧钢带

Cold-reduced steel strip for springs

测定薄钢板上釉和瓷时浸渍重量损失的试验方法

Testing method for determining pickling weight loss of sheet steel for vitreous and porcelain enamelling

耐热钢板、带材

Heat-resistant steel plate, sheet and strip

压力容器用钢 板材、带材和棒材的技术供货要求

Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

澳大利亚结构钢标准的发展

Development of Australian Structural Steel Standards

煤矿液压支架用易焊接高强度及超高强度钢板

Easy-to-weld high-strength and ultra-high-strength steel plates for hydraulic supports in coal mines

公差碳钢、薄板、带材和板材

Tolerances Carbon Steel, Sheet, Strip, and Plate

公差、耐腐蚀和耐热钢、铁合金、钛及钛合金板材、带材和板卷

Tolerances, Corrosion- and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate

耐腐蚀和耐热钢 板材、带材和板材 17Cr 13Ni 2.5Mo（316L）固溶热处理

Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (316L) Solution Heat Treated

钢，耐腐蚀，薄板，带材和板材 19Cr 9.5Ni（304L）固溶热处理

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated

耐腐蚀钢、薄板、带材和板材 19Cr 9.2Ni（SAE 30304）固溶热处理

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated

钢，耐腐蚀，薄板和带材 18Cr 8Ni（SAE 30301）冷轧，185 ksi（1276 MPa）抗拉强度

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength

钢 耐腐蚀 板材和带材 18Cr 8Ni（SAE 30301）冷轧 全硬 抗拉强度 185 ksi（1276 MPa）

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength

钢 耐腐蚀 板材和条材 18Cr 8Ni（SAE 301）冷轧 3/4硬 175 ksi（1207 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

钢，耐腐蚀，薄板和带材 18Cr 9.0Ni（SAE 30302）冷轧，全硬，185 ksi（1276 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength

钢 耐腐蚀 板材和带材 19Cr 9.2Ni（304）冷轧 1/2硬 150 ksi（1034 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength

钢 耐腐蚀 板材和条带 19Cr 9.2Ni（304）冷轧 3/4硬 175 ksi（1207 MPa）抗拉强度

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

钢 耐腐蚀 板材和带材 19Cr 9.2Ni (304) 冷轧 全硬 抗拉强度 185 ksi (1276 MPa)

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength

钢材、薄板、带材和厚板 0.75Si 0.62Cr 0.20Mo 0.10Zr（0.10 0.17C）

Steel, Sheet, Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)

钢板中常见表面缺陷分类

Classification of Common Surface Imperfections in Sheet Steel

公差 公制碳钢 薄板 钢带 和板材

Tolerances@ Metric Carbon Steel@ Sheet@ Strip@ and Plate

焊接气瓶用钢板和带钢

Steel sheet and strip for welded gas cylinders

固定海上结构用可焊接结构钢 技术交货条件 第1部分：钢板

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates

航空航天系列 钢 板材和板片 热轧 尺寸

Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions

玻璃和搪瓷 打算用于建筑的钢面板上所涂搪瓷涂层的特性（ISO 28722:2008）

Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)

搪瓷和瓷釉 用于测试钢板、铝板和铸铁上搪瓷的样品生产（ISO 28764:2008）

Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008)

用于评估工业涂料性能的钢试板的材料和制备要求

Material and Preparation Requirements for Steel Test Panels Used to Evaluate the Performance of Industrial Coatings

SSPC 水性乳胶底漆性能规范

Latex Primer for Steel Surfaces, Performance-Based

桥梁用耐候钢 第1部分：钢板

Weathering steel for bridge — Part1: Steel plate

钢板拉伸试验 原位图像采集

Tensile testing for steel sheet and plate - In-situ image collecting

航空航天系列 钢 冷轧板材和带材 厚度 0,1mm = a = 3mm 尺寸

Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm = a = 3 mm - Dimensions

油漆和清漆 测试用标准板（ISO 1514:2016）

Paints and varnishes - Standard panels for testing (ISO 1514:2016)

大型冲压车间工具的切削元件

Trim steels for large stamping dies