美利体育登录入口官网

塑料和复合材料卫生管道固定装置的试验方法 浴缸耐冲击性测定

Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of baths for ablutionary purposes

卫生洁具用管形制品的目视内孔探测检验的标准指南

Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

卫生美利体育官网首页网址用管形产品的可视钻孔的标准指南

Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

船用米制雷达警戒装置的标准规范

Standard Terminology Relating to Surface Imperfections on Ceramics

硅片表面优先腐蚀或装饰性表面缺陷的计数测试方法

Standard Test Method for Counting Preferentially Etched or Decorated Surface Defects in Silicon Wafers

钨密封棒和金属丝表面缺陷的标准试验方法

Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire

未辅助视觉美利体育登录入口官网晶圆表面的质量检验实践

Quality inspection practice of wafer surface without visual inspection

结构与污染物识别测试方法

Structure and contaminant identification test methods

热, 温或者冷锻. 交付之前的维修条件

Hot, warm or cold forging. Repair conditions prior to delivery

铁氧体磁芯.表面缺陷限值指南.通用规范

Ferrite cores. Guidelines on the limits of surface irregularities. General specification

胶合板.按表观分类.评估和表达特征和缺陷的方法

Plywood - Classification by surface appearance - Methods for measuring and expressing characteristics and defects

钢管的无损美利体育登录入口官网 表面缺陷探测用无缝和焊接钢管的液体渗透美利体育登录入口官网

Non-destructive testing of steel tubes. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections

钢管的无损测试 美利体育登录入口官网无缝和焊接铁磁钢管表面缺陷的磁粉检验

Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

光学和光学仪器 隐形眼镜 硬性隐形眼镜夹杂物和表面缺陷的测定

Optics and optical instruments — Contact lenses — Determination ofinclusions and surface imperfections for rigid contact lenses

光学和光子学 准备光学元件和系统的图纸 表面瑕疵

Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfections

建筑和土木工程.密封剂.因暴露在人工或自然风化条件下龟裂和开裂的测定

Buildings and civil engineering works. Sealants. Determination of crazing and cracking following exposure to artificial or natural weathering

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings. Ceramic rolling elements. Terms and characteristics of surface imperfections

A类管系附件用铸钢件表面缺陷目视检验方法

Visual method for evaluation of surface irregularities of steel castings for A kind of piping accessories

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings – Ceramic rolling elements – Terms and characteristics of surface imperfections

耐磨铸钢件表面缺陷修补处理规范

Specification for repairing surface defects of wear-resistant steel castings

航空航天系列紧固件套筒技术规范

Aerospace series - Sleeves for fasteners - Technical specification; Text in German and English

开槽沉头（平）头木螺钉

Slotted countersunk (flat) head wood screws

热轧钢板、宽扁钢和型钢表面状态的交货要求.第1部分:一般要求

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004

热轧钢板、宽扁钢和型材表面状况交货要求第1部分：一般要求

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004

热轧钢板、宽扁钢和型钢表面状态的交货要求.第2部分:钢板和宽扁钢

Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004

热轧钢板、宽扁钢和型材表面状况交货要求第2部分：厚板和宽扁钢

Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004

热轧钢板、宽扁钢和型钢表面状态的交货要求.第3部分:型钢

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections; German version EN 10163-3:2004

热轧钢板、宽扁钢和型材表面状况交货要求第3部分：型材

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections; German version EN 10163-3:2004

冷镦和冷挤压用钢棒、棒材和线材 第 1 部分：一般技术交货条件

Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions

热锻、温锻或冷锻 交付前的修复条件（草案）

Hot, warm or cold forging - Repair conditions prior to delivery

航空航天系列.带关节轴承和自润滑涂层的吊环端头.交货技术条件

Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996

航空航天系列 带自润滑衬里的耐腐蚀钢球面滑动轴承 环境温度下的高载荷 技术规范

Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification; German and English version FprEN 2755:2020

弹性体圆环密封圈（O型圈）的表面缺陷限值

Limits of surface imperfections of elastomeric toroidal sealing rings (o-rings)

装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第2部分:性能测定.德文版本EN 438-2-2016

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016

航空航天系列.21000 kPa及以下的37?球面管子螺纹.英制系列.技术规范

Aerospace series - Pipe coupling 37° spherical, up to 21000 kPa - Inch series - Technical specification; German and English version EN 4560:2003

航空航天系列 高达 21 000 kPa 的法兰联轴器 技术规范 英制系列

Aerospace series - Flange couplings up to 21 000 kPa - Technical specification - Inch series; German and English version EN 4814:2017

铁氧体磁芯.表面缺陷极限指南.第4部分:环形磁芯(IEC 60424-4-2015).德文版本EN 60424-4-2016

Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores (IEC 60424-4:2015); German version EN 60424-4:2016

先进技术陶瓷——整体陶瓷 一般和质地特性 第 1 部分：通过染料渗透测定缺陷的存在

Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration

高级工业陶瓷.块体陶瓷.一般和结构特性.第1部分:用染色穿透法测定缺陷

Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration; English version of DIN EN 623-1:2006-06

先进技术陶瓷 整体陶瓷

Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration; German version EN 623-1:2006

铁氧体磁芯. 表面不规则性的尺寸和极限指南. 第5部分：电感器和变压器用EP芯和相关部件(IEC 51 / 1188 / CD:2017)

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers (IEC 51/1188/CD:2017)

制造钢丝所用非合金钢线材.第4部分:对特殊用途线材的特定要求(ISO 16120-4-2011);德文版本EN ISO 16120-4-2011

Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2011); German version EN ISO 16120-4:2011

塑料 聚甲基丙烯酸甲酯片 类型、尺寸和特性 第1部分：铸片

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003); German version EN ISO 7823-1:2003

塑料 聚甲基丙烯酸甲酯片材 类型、尺寸和特性 第2部分：挤出片材

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003); German version EN ISO 7823-2:2003

家具面.第12部分:兼容性测定(ISO 8130-12-1998);德文版本EN ISO 8130-12-2010

Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998); German version EN ISO 8130-12:2010

粉末涂料 第12部分：相容性测定

Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019); German version EN ISO 8130-12:2019

光学和光子学 光学元件和系统的制图准备 第7部分：表面缺陷公差

Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances

光学和光子学.光学元件和系统的制图准备.第7部分:表面缺陷(ISO 10110-7-2017)

Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections (ISO 10110-7:2017)

光学和光子学 光学元件和系统制图 第7部分：表面缺陷

Optics and photonics – Preparation of drawings for optical elements and systems – Part 7: Surface imperfections

光学和光子学 光学元件表面缺陷的测试方法

Optics and photonics - Test methods for surface imperfections of optical elements

光学和光子学. 光学元件表面缺陷的试验方法(ISO 14997-2011)

Optics and photonics - Test methods for surface imperfections of optical elements (ISO 14997:2011)

液压动力系统.O型环.第3部分:质量验收准则(ISO 3601-3-2005)

Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005)

流体动力系统 O 形圈 第3部分：质量验收标准

Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005)

光学和光子学 制作光学元件和系统图形 表面不完整性的规范和测量系统

Optics and photonics - Specification and measurement system for patterned surface imperfections in fabricating optical components and systems

内燃机 活塞环 第4部分：质量要求

Internal combustion engines—Piston rings—Part 4:Quality requirements

光学制图

Optical drawings

核燃料组件零部件的渗透检验方法

The liquid penetrant examination for component parts of nuclear fuel assemblies

产品几何量技术规范(GPS)表面缺陷 术语、定义及参数

Geometrical product specifications(GPS) Surface imperfections--Terms.definitions and parameters

制丝用非合金钢盘条 第3部分:沸腾钢和沸腾钢替代品低碳钢盘条

Non-alloy steel wire rod for conversion to wire.Part 3:Specific requirements for rimmed and rimmed substitute low carbon steel wire rod

软磁铁氧体磁心术语定义.第1部分：物理缺陷术语

Terms and nomenclature for cores made of magnetically soft ferrites.Part 1:Terms used for physical irregularities

核电厂用紧固件 第2部分：碳钢和合金钢螺母

Fasteners for nuclear power plants—Part 2: Nuts made of carbon steel and alloy steel

紧固件表面缺陷 螺栓、螺钉和螺柱一般要求

Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements

紧固件表面缺陷 螺母

Fasteners-Surface discontinuities-Nuts

紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求

Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements

铁氧体磁心 表面缺陷极限导则 第8部分：PQ型磁心

Ferrite cores—Guideline on the limits of surface irregularities—Part 8: PQ-cores

透明平板玻璃. 规格

Clear sheet glass. Specifications

黑色金属轧材.表面缺陷的术语和定义

Rolled products of ferrous metals. Surfase defects. Terms and definitions

原镁锭.技术条件

Primary magnesium ingots. Specifications

无缝和焊接钢管 第4部分 用于美利体育登录入口官网表面缺陷的液体渗透美利体育登录入口官网

Seamless and welded steel tubes. Part 4. Liquid penetrant inspection for the detection of surface imperfections

纤维光学互连器件和无源元件. 基本试验和测量程序. 第3-35部分: 检查和测量. 纤维光学连接器和纤维桩收发器的目视检查

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers

光学和光学仪器.光学元件和系统图纸的制备.第7部分:表面缺陷公差

Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances

建筑和土木工程.密封剂.因暴露在人工或自然风化条件下龟裂和开裂的测定

Buildings and civil engineering works - Sealants - Determination of crazing and cracking following exposure to artificial or natural weathering

光学和光学仪器.测定光学元件表面缺陷的试验方法

Optics and photonics - Test methods for surface imperfections of optical elements

流体动力系统 O型密封圈.第3部分:质量验收准则

Fluid power systems - O-rings - Part 3: Quality acceptance criteria

流体动力系统O形圈第3部分:质量验收标准修改1

Fluid power systems — O-rings — Part 3: Quality acceptance criteria — Amendment 1

流体动力系统O形圈第3部分:质量验收标准 技术勘误表1

Fluid power systems — O-rings — Part 3: Quality acceptance criteria

与弹性体密封元件结合的旋转轴唇型密封件.第5部分:外观不完整性的鉴定

Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections

涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections

产品几何量技术规范(GPS) 表面缺陷 术语、定义和参数 两种语言版

Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters

橡胶 管接头的密封件制造工艺的建议 缺陷类型和描述

Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections

光学和光子学.光学元件表面缺陷的试验方法.第2部分:机器视觉

Optics and photonics — Test methods for surface imperfections of optical elements — Part 2: Machine vision

光学和光子学.光学元件和系统图纸的制备.表面缺陷规范和测量系统

Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems

滚动轴承 钢球表面缺陷图册及评定方法

Rolling bearings. Atlas and the assessment methods for surface imperfections of steel balls

重型机械通用技术条件.第2部分:火焰切割件

Heavy mecbanicai general techniques and standards. Part 2: Oxygen cutting workpiece

阀门铸钢件外观质量要求

Valve cast steel visual quality requirements

O型密封圈.第3部分:质量验收标准

O-rings -- Part 3: Quality acceptance criteria

O形环.质量验收标准

O-rings -- Quality acceptance criteria

航天系列 管接头 8°30' 至 28 000 kPa 转换接头 公制系列 技术规范

Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification

近端焊缝试验 磁粉美利体育登录入口官网（ISO 17638:2016）

Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)

表面缺陷对海上涂层系统涂层性能长期耐久性的影响

Effect of Surface Imperfection Affecting Long-term Durability of Coating Performance on Offshore Coating System

卫生器具.检查搪瓷表面的外观.测试方法

Sanitary appliances - Checking the appearance of enameled surfaces - Test method

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings - Ceramic rolling elements - Terms and characteristics of surface imperfections

滚动轴承 陶瓷滚动体 表面缺陷的术语和特性

Rolling bearings - Ceramic rolling elements - Terms and characteristics of surface imperfections

农产品市场信息采集产品分级规范 瓜类蔬菜

Agricultural product market information collection, product grading and standardization of melons and vegetables

光学和光子学 准备光学元件和系统的图纸 表面缺陷规格和测量系统

Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfection specification and measurement systems

软管组件 已安装 目视检查指南

Hose Assemblies, Installed, Visual Inspection Guide for

航空航天 除 O 型圈外的弹性密封元件的目视检查标准

Aerospace - Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings

内燃机活塞环质量要求

Internal Combustion Engines—Piston Rings—Quality Requirements

含铁棒材,杆材,管材和线材中表面缺陷的美利体育登录入口官网

Detection of Surface Imperfections in Ferrous Rods@ Bars@ Tubes@ and Wires

钢板中常见表面缺陷分类

Classification of Common Surface Imperfections in Sheet Steel

碳钢板和钢条术语汇编

Glossary of Carbon Steel Sheet and Strip Terms

航空航天应用的 TS49 弹性环形密封圈（O 型圈）制造和检验标准

TS49 ELASTOMERIC TOROIDAL SEALING RINGS (O-RINGS) Manufacturing & Inspection Standards for Aerospace Application

TS49-AR 技术规范编号 TS49 的修订记录

TS49-AR Amendment Record for Technical Specification No. TS49

碳化硅单晶抛光片表面质量的测试方法

Test method for measuring surface quality of polished monocrystalline silicon carbide

热轧钢板、宽扁钢及型钢表面条件要求 第2部分：板材和宽扁钢

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

钢管无损美利体育登录入口官网 第11部分：无缝钢管和焊接钢管表面缺陷的液体渗透美利体育登录入口官网

Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections

钢管无损美利体育登录入口官网 第12部分：无缝和焊接铁磁钢管表面缺陷的磁粉美利体育登录入口官网

Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

热锻、温锻或冷锻 交付前的修复条件

Hot, warm or cold forging - Repair conditions prior to delivery

木质板材 内部用途的三聚氰胺覆面板 测试方法

Wood-based panels - Melamine faced boards for interior uses - Test methods

航空航天系列 氟硅橡胶（FVMQ）O形圈 硬度80 IRHD

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

钢管无损美利体育登录入口官网 第4部分：无缝和焊接钢管的液体渗透检验 用于表面缺陷的美利体育登录入口官网（ISO 10893-4:2011）

Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)

塑料 甲基丙烯酸甲酯板 型号、尺寸和特性 第3部分：连续铸造成型板（ISO 7823-3:2021）

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2021)

在应用涂料及相关产品之前钢材基底的准备 表面清洁度的目视评估 第3部分：具有表面缺陷区域（如焊缝、边缘等）的准备等级（ISO 8501-3:2006）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006)

几何产品规范 (GPS) 表面缺陷 术语、定义和参数 (ISO 8785:1998)

Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)

旋转轴唇形密封件包含热塑性密封元件 第5部分：可视缺陷的识别（ISO 16589-5:2011 等同采用）

Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections (ISO 16589-5:2011, IDT)

滚动轴承 陶瓷滚动体 表面缺陷的术语和特征（ISO 3643:2024 等同采用）

Rolling bearings — Ceramic rolling elements — Terms and characteristics of surface imperfections (ISO 3643:2024, IDT)

采用弹性密封元件的旋转轴唇型密封件 第5部分：视觉缺陷的识别 (ISO 6194-5:2008, IDT)

Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections (ISO 6194-5:2008, IDT)

内燃机 活塞环 第5部分：质量要求（ISO 6621-5:2005 IDT）

Internal combustion engines - Piston rings - Part 5: Quality requirements (ISO 6621-5:2005, IDT)

内燃机 活塞环 第5部分：质量要求（ISO 6621-5:2020 等同采用）

Internal combustion engines - Piston rings - Part 5: Quality requirements (ISO 6621-5:2020, IDT)

航空航天系列 管接头 8°30' 至 28000kPa 适配器 公制系列 技术规格

Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification (Endorsed by AENOR in January of 2007.)

航空航天系列 管接头 8°30' 至 28000kPa 动态梁密封 公制系列 技术规范

Aerospace series - Pipe coupling 8°30' up to 28 000 kPa Dynamic beam seal - Metric series - Technical specification (Endorsed by Asociación Espa?ola de Normalización in June of 2019.)

钢管的无损美利体育登录入口官网 第4部分：用于美利体育登录入口官网表面缺陷的无缝和焊接钢管的液体渗透美利体育登录入口官网（ISO 10893-4:2011）

Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)

钢管的无损美利体育登录入口官网 第5部分：用于美利体育登录入口官网表面缺陷的无缝和焊接铁磁钢管的磁粉美利体育登录入口官网（ISO 10893-5:2011）

Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)

涂漆和相关产品前钢基材的准备 表面清洁度的目视评估 第3部分：焊缝、边缘和其他表面缺陷区域的准备等级（ISO 8501-3:2006）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006)

德国VFF技术指南 KU.01: 2009-03

VFF Technical Guide KU.01: 2009-03