美利体育登录入口官网

熔铁炉展性铸铁的标准规格

Standard Specification for Cupola Malleable Iron

冲天炉可锻铸铁标准规范

Standard Specification for Cupola Malleable Iron

珠光体韧性铁标准规格

Standard Specification for Pearlitic Malleable Iron

铁素体可锻铁铸件的标准规格

Standard Specification for Ferritic Malleable Iron Castings

钢板用于特殊应用的厚度拉伸试验标准规范

Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

钢板用于特殊应用的厚度拉伸试验标准规范

Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

通用铜合金永久铸模铸件

Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

通用铜合金永久铸模铸件的标准规范

Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

屋顶膜载荷应变性能的标准实践

Standard Practice for Testing Load-Strain Properties of Roofing Membranes

使用拉伸和静水压试验方法测试聚乙烯(PE)管熔接的试样和测试条件的标准实施规程

Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

直接拉伸应力腐蚀试样的制备和使用的标准实施规程

Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

直接拉伸应力腐蚀试样的制备和使用的标准实施规程

Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

塑料 测试样品

Plastics. Test specimens

除硬质金属外的烧结金属材料.抗拉试验工件

Sintered metal materials, excluding hardmetals - Tensile test pieces

热塑性塑料管道化学阻抗的测定.第1部分:聚烯烃管道

Determination of chemical resistance of thermoplastics pipes; polyolefin pipes

金属材料试验.抗拉强度试样

Testing of metallic materials - Tensile test pieces

金属材料试验.抗拉强度试样

Testing of metallic materials - Tensile test pieces

金属材料测试-拉伸试件

Testing of metallic materials - Tensile test pieces

塑料 试样（草案）

Plastic sample (draft)

轻型输送带 最大拉伸强度的测定

Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013); German version EN ISO 21180:2013

烧结金属材料，不包括硬质合金 – 拉伸试件

Sintered metal materials, excluding hard metals – Tensile test pieces

硬金属除外的烧结金属材料.拉力试验块(ISO 2740:2009),德文版本EN ISO 2740:2009

Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009); English version of DIN EN ISO 2740:2009-10

烧结金属材料 不包括硬质合金 拉伸试件

Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009); German version EN ISO 2740:2009 / Note: To be replaced by DIN EN ISO 2740 (2021-12).

金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 (ISO 7539-4:1989); 德文版本 EN ISO 7539-4:1995

Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995

塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和性能的测定

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties

硬金属除外的烧结金属材料.拉伸试验块

Sintered metal materials, excluding hardmetals - Tensile test pieces

灰铸铁力学性能试验方法 第1部分：拉伸试验

Test methods for mechanical properties of gray cast iron Part 1: Tensile test

铝合金 铸造 砂 8.0Cu 6.0Mg 0.50Mn 0.50Ni 铸态（UNS A12400）

Aluminum Alloy@ Casting@ Sand@ 8.0Cu 6.0Mg 0.50Mn 0.50Ni@ As Cast (UNS A12400)

镁合金铸造件 砂型 8.7Al 0.70Zn（AZ91C-T6） 固溶热处理和时效处理

Magnesium Alloy Castings, Sand, 8.7Al - 0.70Zn (AZ91C-T6), Solution Heat Treated and Aged

镁合金铸件 砂 6.0Zn 0.80Zr（ZK61A-T5）沉淀热处理（UNS M16610）

Magnesium Alloy Castings@ Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated (UNS M16610)

含铅红黄铜、砂型和离心铸件 85Cu 5.0Sn 5.0Pb 5.0Zn As Cast

Leaded Red Brass, Sand and Centrifugal Castings 85Cu – 5.0Sn – 5.0Pb – 5.0Zn As Cast

锰青铜、砂型和离心铸件 58Cu 39Zn 1.2Fe 1.0Al 0.80Mn As Cast

Manganese Bronze, Sand and Centrifugal Castings 58Cu – 39Zn – 1.2Fe – 1.0Al – 0.80Mn As Cast

铸铁件 珠光体可锻铸件（UNS F23330）

Iron Castings@ Pearlitic Malleable (UNS F23330)

球墨铸铁件 砂 80 000 psi（550 MPa）铸态抗拉强度（UNS F34100）

Ductile (Nodular) Iron Castings@ Sand 80@000 psi (550 MPa) Tensile Strength As Cast (UNS F34100)

硬质0.80Cr 1.80Ni 0.35Mo(0.28-0.36C)砂型熔模铸件

Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed J23260; R (2003)

钢铸件 Investment 0.80Cr 1.8Ni 0.35Mo（0.38 0.46C）（SAE 4340 修改）退火（UNS J24060）

Steel Castings@ Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340 Modified) Annealed (UNS J24060)

合金铸件 投资 耐腐蚀和耐热 65.5Co 25Cr 1.8Ni 5.0W 铸态（UNS R30023）

Alloy Castings@ Investment@ Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W As Cast (UNS R30023)

合金铸件 Investment Corrosion and Heat Resistant 53Ni 18Cr 18Co 4.0Mo 2.9Ti 2.9Al 0.006B Vacuum-Melted Vacuum-Cast Solution and Precipitation Heat Treated（UNS N07500）

Alloy Castings@ Investment@ Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted@ Vacuum-Cast@ Solution and Precipitation Heat Treated (UNS N07500)

塑料 试样（ISO 20753:2008）

Plastics - Test specimens (ISO 20753:2008)

铁道机车车辆用灰铸铁件通用技术条件

General specification for gray iron castings for railway rolling stock

塑料-耐环境应力开裂（ESC）的测定-第6部分：慢应变速率法（ISO 22088-6:2006）

Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006)

铜及铜合金力学性能和工艺性能试样的制备方法

Preparation method of test pieces for mechanical and technological properties of copper and copper alloys