美利体育登录入口官网

LRFD桥梁施工规范第三版； 2011 中期修订

LRFD Bridge Construction Specifications Third Edition; 2011 Interim Revision

LRFD桥梁施工规范第三版； 2011 中期修订

LRFD Bridge Construction Specifications Third Edition; 2011 Interim Revision

无直接地压影响的集中供热管路的法兰连接 第4部分：带有平垫圈的可拆式法兰连接

Detachable couplings, flanges with flat gaskets for district heating pipelines without direct earth load

无直接地面负载的远距离供热管道 可拆卸接头 法兰连接带平面垫圈

District heating pipelines without direct earth load; Detachable couplings, flanges with flat gaskets

蓄水用螺栓连接的地上热固性玻璃纤维增强塑料嵌板式贮水池

Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage

用于石油和天然气工业的合金和碳钢螺栓

Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries

消防系统用储水罐

Water storage tanks for fire protection systems

钢结构

steel structure

镀锌钢吹风管法兰尺寸

Galvanized steel blowpipe flange dimensions

用于从低温至蠕变范围内任何温度的螺栓通用要求标准规范

Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

木和木基制品中螺栓连接的标准试验方法

Standard Test Methods for Bolted Connections in Wood and Wood-Base Products

钢、混凝土和组合桥梁 - 第6部分：钢材料和工艺规范

Steel, concrete and composite bridges — Part 6 : Specification for materials and workmanship, steel

航空航天系列. 螺栓连接的锁定行为在横向载荷条件下的动态试验 (振动试验)

Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)

机械振动和冲击.测量从机械传向联接支撑结构的振动力.直接法

Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Direct method

钢构建筑 钢结构 金属构造 -

Steel structure building steel structure metal structure

钢制液压结构件.第2部分:设计和制造

Hydraulic steel structures - Part 2: Design and manufacturing

地下矿井铁路 但适用于铁路 30E1 的带 Fl 30

Underground mine railways - But strap Fl 30 for rail 30E1

铁路车辆及其组件的设计指南 螺栓连接 第1部分：螺栓连接的分类

Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints

铁路车辆及其组件的设计指南.螺栓连接.第1部分:螺栓连接的分类

Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints

铁路车辆及其组件的设计指南.螺栓连接.第1部分:螺栓连接的分类

Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints

铁路车辆及其部件设计指南螺栓接头第1部分：螺栓接头的分类

Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints

铁路车辆及其组件的设计指南 螺栓连接 第2部分：设计 机械应用

Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical applications

铁路车辆及其组件的设计指南.螺栓连接.第2部分:设计.机械应用

Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application

铁路车辆及其组件的设计指南 螺栓连接 第3部分：设计 电气应用

Design guide for railway vehicles and their components - Bolted joints - Part 3: Design - Electrical application

铁路车辆及其组件的设计指南 螺栓连接 第4部分：螺栓连接的安全

Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints

铁路车辆及其组件的设计指南 螺栓连接 第4部分：螺栓连接的安全

Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints

铁路车辆及其组件的设计指南.螺栓连接.第4部分:螺栓连接的安全

Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints

铁路车辆及其组件的设计指南. 螺栓连接. 第4部分: 螺栓连接的安全

Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints

铁路车辆及其部件设计指南 螺栓接头 第4部分：螺栓接头的固定

Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints

铁路车辆及其组件的设计指南 螺栓连接 第6部分：连接尺寸

Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions

铁路车辆及其组件的设计指南.螺栓连接.第6部分:连接尺寸

Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions

铁路车辆及其组件的设计指南.螺栓连接.第6部分:连接尺寸

Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions

铁路车辆及其部件设计指南 螺栓连接 第6部分：连接尺寸

Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions

铁路车辆及其组件的设计指南 螺栓连接 第7部分：安装

Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation

铁路车辆及其组件的设计指南.螺栓连接.第7部分:安装

Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation

铁路车辆及其部件设计指南 螺栓接头 第7部分：安装

Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation / Note: To be replaced by DIN 25201-7 (2010-03).

U 型梁用方楔形垫圈

Square taper washers for U-sections

型钢用方锥垫圈

Square taper washers for U-sections / Note: To be replaced by DIN 434 (2023-03) (in preparation).

型钢用方锥垫圈

Square taper washers for U-sections / Note: Date of issue 2023-01-27*Intended as replacement for DIN 434 (2000-04).

U 型钢用方锥形垫圈

Square taper washers for U-sections

工型梁用方形斜面垫圈

Square taper washers for I-sections

工字钢用方锥垫圈

Square taper washers for I-sections / Note: To be replaced by DIN 435 (2023-03) (in preparation).

工字钢用方锥垫圈

Square taper washers for I-sections / Note: Date of issue 2023-01-27*Intended as replacement for DIN 435 (2000-01).

机械连接元件 四角锥垫片的技术条件

Technical requirements for quadrangular pyramid gaskets of mechanical connection elements

主要用于木结构方孔垫圈

Washers - With square hole, especially for timber constructions

滚动轴承 带再循环滚动零件异形钢轨罐道的尺寸标注与操作的安全守则

Rolling bearings - Safety regulations for dimensioning and operation of profiled rail guides with recirculating rolling elements

滚动轴承.带再循环滚动零件异形钢轨罐道的尺寸标注与操作的安全守则.德文和英文文本

Rolling bearings - Safety regulations for dimensioning and operation of profiled rail guides with recirculating rolling elements; Text in German and English

滚动轴承 具有循环滚动元素的型轨导向装置的尺寸确定和安全规定 德文和英文文本

Rolling bearings - Safety regulations for dimensioning and operation of profiled rail guides with recirculating rolling elements; Text in German and English

螺栓连接件用锥形弹簧垫圈

Conical spring washers for bolted connections

弹簧锁紧垫圈

Spring lock washers

用于输送和吸入的盲帽接头 Storz System PN 16

Blank cap couplings Storz System PN 16 for delivery and suction / Note: Date of issue 2022-11-04*Intended as replacement for DIN 14310 (1986-11), DIN 14311 (1985-04), DIN 14312 (1985-04), DIN 14313 (1989-09).

钢结构用垫圈.第1部分:C级产品

Washers for steel structures - Part 1: Product grade C

钢结构用六角螺母六角头螺栓

Hexagon head bolts with hexagon nut for steel structures

焊接六角螺母

Hexagon weld nuts

钢结构和铝结构施工 第2部分：钢结构的技术要求（草案）

Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

按照 DIN EN 1090-2 执行螺栓连接

Execution of bolted connections according to DIN EN 1090-2

起重机.通用设计.第3-1部分:钢结构的试验能力和极限状态.德文版本EN 13001-3-1-2012

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure; German version EN 13001-3-1:2012

起重机总体设计第3-1部分：钢结构的极限状态和证明能力

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure; German version EN 13001-3-1:2012+A2:2018 / Note: Applies in conjunction with DIN EN 13001-1 (2015-06), DIN EN 13001-2 (2014-12).*To be replaced by DIN EN 13001-3-...

法兰及其接头螺栓连接第3部分：钢法兰螺栓材料分类 指定等级

Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005

法兰及其接头 有垫环形法兰连接的设计规则 第1部分：计算方法（草案）

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

法兰及其接头 第4部分：关键服务加压系统螺栓连接装配中的人员能力资格（草案）

Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems

法兰及其接头.第4部分:关键服务加压系统螺栓连接装配中的人员能力资格.德文版本EN 1591-4-2013

Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems; German version EN 1591-4:2013

法兰及其接头第4部分：关键服务加压系统螺栓连接装配人员能力资格

Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems; German version EN 1591-4:2013

欧洲规范3: 设计钢结构 第1-8部分：接头设计

Eurocode 3: Design of steel structures Part 1-8: Design of joints

欧洲规范 3：钢结构的设计和施工 第8部分：连接设计（草案）

Eurocode 3: Design and construction of steel structures – Part 1-8: Design of connections

欧洲结构规范5：木材结构的设计 第1部分-1：通用规则和建筑物规则

Eurocode 5: Design of timber structures Part 1-1: General rules and building rules

德国规范 DIN EN 20898 第二部分: 具有规定强度试验载荷的螺母

German standard DIN EN 20898 Part 2: Nuts with specified strength test loads

计算焊接螺栓连接

Calculation of welded bolted connections

木质结构材螺栓连接力学性能测试方法

Test methods for bolted connections in structural wood and wood-based materials

建筑钢结构.通用规格

Building steel structures. General specifications

建设工程及典型工艺流程 金属结构制品螺栓连接的安装 工作的监管和监督

Construction works and typical technological processes. The installation of the bolted connections of structural metal products. Regulation and monitoring of work

钢结构螺栓连接件 按轮廓粗糙度高度参数测量方法

Bolted connections in steel structures. Measurement of the surface roughness by the height of irregularities

钢结构螺栓连接件 确定螺栓扭转系数的方法

Bolted connections in steel structures. Determination of k-factor for bolts

确保测量一致性的状态系统.从机械到连接的支撑结构振动功率流测量.第1部分.直接法

State system for ensuring the uniformity of measurements. Measurement of vibration power flow from machines into connected support structures. Part 1. Direct method

粮用钢筒仓 第2部分：要求

Aerial steel silo for grain storage. Part 2 - Requirements.

航空航天系列. 螺栓连接的锁定行为在横向载荷条件下的动态试验 (振动试验)

Aerospace series - Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)

机械振动和冲击.测量从机械传向联接支撑结构的振动力.第1部分:直接法

Mechanical vibration and shock - Measurement of vibration power flow from machines into connected support structures - Part 1: Direct method

紧固件公差.第3部分:螺栓、螺钉和螺母用垫圈 产品等级为A、C和F级

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F

允许的紧固件偏差 第3部分：螺栓、螺钉和螺母的垫圈 A类、C类和F类产品 (ISO 4759-3:2016)

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)

大直径滑套式和对焊环松套法兰

Large Diameter Slip-On and Lap-Joint Flanges

端面加工的青铜、铁质及钢制法兰

Spot Facing for Bronze, Iron, and Steel Flanges

水电工程启闭机制造安装及验收规范

Code for manufacture erection and acceptance of gate hoists in hydropower projects

交流高压开关美利体育官网首页网址 管件

High voltage alternating current equipment - Tube fittings

紧固件 螺栓连接用锯齿锥形垫圈 CS 符号

Fasteners - Serrated conical washers for bolted joints - CS symbol

管道材料规范3CK1S01

Piping Material Specification 3CK1S01

过程工业中的垫片指南

Gasket Guidelines

法兰及其接合面 螺栓 第3部分：钢制法兰用螺栓材料的分类 指定等级

Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated

石油天然气钻采美利体育官网首页网址 碳钢和合金钢螺栓连接

Carbon steel and alloy steel bolt connections for oil and gas drilling equipment

机车车辆螺栓连接设计准则 第1部分：螺栓连接的分类

Design guidelines for rolling stock bolted connections Part 1: Classification of bolted connections

机车车辆螺栓连接设计准则 第2部分：机械应用设计

Design guide for railway vehicles and their components Bolted joints.Part 2:Design-Mechanical application

机车车辆及其零部件设计准则 螺栓连接 第4部分：螺栓连接的安全

Design guide for railway vehicles and their components Bolted joints.Part 4:Securing of bolted joints

机车车辆及其零部件设计准则 螺栓连接 第5部分：防腐蚀保护

Design guide for railway vehicles and their components Bolted joints.Part 5:Protection against corrosion

机车车辆螺栓连接设计准则 第6部分：连接尺寸

Design guidelines for rolling stock bolted connections Part 6: Connection dimensions

机车车辆及其零部件设计准则 螺栓连接 第7部分：安装

Design guide for railway vehicles and their components Bolted joints.Part 7:Installation

低压保险丝 第7部分：用于保护电池的保险丝连接

Low-voltage fuses — Part 7: Fuse links for the protection of batteries (IEC 32B/695/CD:2020)

高负荷螺栓连接系统的设计计算

Systematic calculation of high duty bolted joints, Joints with one cylindrical bolt

高应力螺纹连接的系统计算 圆柱形单螺纹连接

Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt

高应力螺纹连接的系统计算 圆柱形单螺纹连接

Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt

高应力螺栓连接的系统计算 多螺栓连接

Systematic calculation of highly stressed bolted joints - Multi bolted joints

高强度螺栓联接系统的计算

Systematic calculation of high duty bolted joints Joints with one cylindrical bolt

高强度螺栓连接系统的系统化计算 第1部分：单个圆柱螺栓连接

Systematic calculation of high duty bolted joints - Part 1: Joints with one cylindrical bolt

螺纹连接 张力连接 精密工程部件

Bolted joints – Tensioned joints – Precision engineering components

螺纹连接 拉伸接合 精密工程元件

Bolted joints – Tensioned joints – Precision engineering components

螺栓工艺美利体育官网首页网址过程能力测定

Capability test for bolting technology machines Process capability test (PFU)

最低要求安装紧固系统和工具 在工厂建设和机械工程中的应用及压力边界下的法兰连接

Minimum requirements for installation, fastening systems and tools for use in plant construction and mechanical engineering and flange connections under pressure limits

拧紧机能力测试 过程能力测试（PFU）

Capability test for bolting technology machines - Process capability test (PFU)