| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ASTM DS58-1975 试验 |
Evaluation of the Elevated Temperature Tensile and Creep Rupture Properties of 3-9 percent Chromium-Molybdenum Steels
|
1975-10 美国材料与试验协会 |
| ASTM DS6S1-1966 规范 |
Supplemental Report on the Elevated-Temperature Properties of Chromium-Molybdenum Steels
应力断裂 蠕变 |
1966-06 美国材料与试验协会 |
| ASTM DS6S2-1971 试验 |
Supplementary report on the high temperature properties of chromium-molybdenum steels (evaluation of 2%Cr-1Mo steel)
屈服强度 |
1971 美国材料与试验协会 |
| AWS B2.1-4-217-2021 试验 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
气体钨极电弧焊 |
2021 美国焊接协会 |
| AWS B2.1-4-218-2021 规范 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
标准焊接工艺规程 焊后热处理 |
2021 美国焊接协会 |
| AWS B2.1-4-220-2021 试验规范 |
气体钨极氩弧焊（消耗性插入根部）铬钼钢（M-4/P-4 组1或2） IN515和ER80S-B2的焊接工艺规范 Welding procedure specification for gas tungsten arc welding (consumable insert root) of chromium-molybdenum steels (M-4/P-4 Group 1 or 2) IN515 and ER80S-B2
|
2021 美国焊接协会 |
| AWS B2.1-4-221-2021 规程标准 |
气体钨极氩弧焊（消耗性插入根部）后采用手工电弧焊铬钼钢焊接工艺规范 Specification for welding procedures for chromium-molybdenum steels by manual arc welding followed by gas tungsten inert gas welding (consumable insertion at the root)
程序资格记录 |
2021 美国焊接协会 |
| AWS B2.1-5A-225-1999(2009) 规范 |
碳钢与奥氏体不锈钢（M-1 至 M-8 或 P-8）气体保护钨极电弧焊的标准焊接工艺规范 (WPS) 规格 10 至 18 焊接状态下 有或无衬垫 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing
钨极气体保护焊 |
2009 美国焊接协会 |
| AWS D10.8-1996 QT |
Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing
焊后热处理 焊材 |
1996-01-01 美国焊接协会 |
| BS 3T 53:1980(2000) 规范 |
铬-钼钢管规范（700 MPa）—（外径不小于12.5毫米）（可焊接） Specification for Chromium - molybdenum steel tube (700 MPa) — (Outside diameter not less than 12.5 mm) (Weldable)
|
2000 英国标准学会 |
| DIN 65238:2002-11 规范 |
航空航天 MJ 螺纹、深沉孔、自锁、非浮动、角型、钢制锚固螺母 Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C
MJ 螺纹 锚螺母 |
2002-11 德国标准化学会 |
| GB 19158-2003 CP |
Steel cylinders for the storage of compressed natural gas
|
2003-05-23 国家市场监督管理总局 |
| GB/T 36669.1-2018 规范/规程 |
In-service pressure vessel inspection—Part 1: Hydrogenation reactor
堆焊层 |
2018-09-17 国家市场监督管理总局 |
| JIS G 4105:1979 规范标准 |
Chromium molybdenum steels
热轧钢棒 线材 |
1979-02-01 日本工业标准调查会 |
| JIS G 4109:2024 试验 |
Chromium-molybdenum alloy steel plates for boilers and pressure vessels
钢板 |
2024-01-01 日本工业标准调查会 |
| SAE AMS-S-5626A-2002 规范 |
Steel: Chrome-Molybdenum (4140) Bars@ Rods@ and Forging Stock (For Aircraft Applications)
线材 |
2002-01-01 美国机动车工程师协会 |
| WRC 416:1996 试验 |
Creep Crack Growth Behavior in Weld Metal/Base/Metal/Fusion Zone Regions in Chromium Molybdenum Steels
热影响区 |
1996-1-1 美国焊接研究委员会 |
Copyright ?2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号
页面更新时间: 2026-05-07 12:28